AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

207-2409 TANK & MTG GP-HYDRAULIC S/N 1241-UP PART OF 2C-9820 GENERAL AR 120H MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
VALVE & LINKAGE GP
VALVE GP-BANK
VALVE GP-COMBINATION
VALVE GP-CONTROL

MOTOR GRADER 120H MOTOR GRADER 124
 120H Motor Grader 12400001-UP (MACHINE) POWERED BY 3126B Engine SEBP3683 120H 124   (2003)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
 

#SEBP36830320
 

207-2409: TANK & MTG GP-HYDRAULIC

207-2409 TANK & MTG GP-HYDRAULIC
S/N 1241-UP
PART OF 2C-9820 GENERAL AR
i01892258 SEBP3683
2072409 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8502 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 [1] KEY (HYDRAULIC TANK)  
  8Y-6364 [1] SLEEVE  
2. 207-2410 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 4D-7794 [3] CLIP  
4. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830321
 

7I-4622: VALVE & LINKAGE GP

7I-4622 VALVE & LINKAGE GP -HYDRAULIC CONTROL
S/N 1241-UP
PART OF 166-3305 CONTROL AR-HYDRAULIC
i00124759 SEBP3683
7I4622 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER (ARTICULATION/RIPPER)  
5. 8D-5634 [2] LEVER (CENTERSHIFT/BLADE LIFT)  
6. 8X-4276 [9] ROD  
7. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
8. 7H-3641 [18] END-ROD (5/16-24-THD)  
9. 8D-5633 [2] LEVER (WHEEL LEAN/SIDESHIFT)  
10. 101-2458 [1] LEVER (BLADE TIP)  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [11] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [18] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [9] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER (BLADE LIFT/CIRCLE DRIVE)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
34. 6V-8188 [2] NUT (1/2-13-THD)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCL)
40. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
41. 2G-6740 [1] KNOB-RIPPER  
42. 137-4516 [1] SHAFT  
43. 104-7429 [2] PLATE  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830322
 

6E-3032: VALVE GP-BANK 4

6E-3032 VALVE GP-BANK 4 -HYDRAULIC CONTROL, RH
S/N 1241-UP
PART OF 7I-4622 VALVE & LINKAGE GP
i00124667 SEBP3683
6E3032 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. [1] PLATE-IDENTIFICATION (VALVE)  
12. 9S-4180 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830323
 

104-8645: VALVE GP-BANK 5

104-8645 VALVE GP-BANK 5 -LH
S/N 1241-UP
PART OF 7I-4622 VALVE & LINKAGE GP
i00124958 SEBP3683
1048645 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
10. 101-9346 [1] COVER  
11. 9S-4180 [1] PLUG  
12. 4J-7533 [1] SEAL-O-RING  
13. [1] PLATE-IDENTIFICATION  
14. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830324
 

229-7155: VALVE GP-COMBINATION

229-7155 VALVE GP-COMBINATION
S/N 1241-UP
PART OF 171-6431 LINES GP-PUMP
i01876675 SEBP3683
2297155 VALVE GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] BODY  
2. 100-6021 Y [1] VALVE GP-RELIEF (STEERING)  
3. 9S-8003 [1] PLUG (1/2-20-THD)  
4. 3T-8236 [1] SPRING  
5. 6V-5230 M [2] BOLT (M10X1.5X60-MM)  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)(DIAGNOSTIC)  
7. 3J-1907 [1] SEAL-O-RING  
8. 6V-8647 [2] CONNECTOR  
9. 3J-7354 [3] SEAL-O-RING  
10. 6E-1923 [1] TUBE AS  
11. 4J-5477 [2] SEAL-O-RING  
12. 4T-4935 Y [1] VALVE GP-RELIEF (MAIN)  
13. 8T-8987 [1] ELBOW  
14. 2M-9780 [1] SEAL-O-RING  
15. 1H-0337 [1] VALVE  
16. 9F-6705 [1] SPRING  
17. 9S-4189 [1] PLUG  
18. 3S-6925 [1] SPRING  
19. 4T-4207 [1] PLUG-ORIFICE  
20. 5M-2057 [1] SEAL-O-RING  
21. 8M-3175 [2] WASHER-HARD (10.2X16X3-MM THK)  
22. 6V-0852 [1] CAP-DUST  
23. 6E-4703 Y [1] VALVE GP-RELIEF (IMPLEMENT SIGNAL)  
24. 3K-0360 [1] SEAL-O-RING  
25. 9S-8001 [2] PLUG  
26. 4J-7533 [2] SEAL-O-RING  
27. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)(SIGNAL)  
30. 2S-4078 [1] SEAL-O-RING  
31. 9S-8009 [1] PLUG-O-RING  
32. 4K-1388 [1] SEAL-O-RING  
33. 6V-8398 [1] SEAL-O-RING  
34. 7X-4776 [2] RING-BACKUP  
35. 9S-8002 [1] PLUG (7/16-20-THD)  
36. 131-8350 Y [1] VALVE GP-PURGE (IMPLEMENT SIGNAL)  
37. 3P-9498 [1] PLUG-ORIFICE  
38. Z [1] VALVE  
39. 6V-7418 [1] PLUG-PIPE  
40. 1J-9671 [1] SEAL-O-RING  
41. 9S-4183 [3] PLUG (1-1/16-12-THD)  
42. 3D-2824 [3] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP36830325
 

107-0545: VALVE GP-CONTROL

107-0545 VALVE GP-CONTROL -RIPPER
S/N 1241-UP
PART OF 104-8645 VALVE GP-BANK 5
i00124982 SEBP3683
1070545 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4599 [1] BODY  
2. 101-1152 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 7J-9933 [2] SEAL-O-RING  
9. 101-4147 Y [1] VALVE GP-RELIEF (RIPPER)  
11. 102-7412 [1] SPRING  
12. 101-1973 [4] RETAINER  
13. 101-1971 [1] LEVER  
14. 101-1982 [1] LEVER AS  
15. 8M-4437 [2] SEAL-O-RING  
16. 101-1983 [2] RING-BACKUP  
17. 4D-9986 [1] SEAL-O-RING  
18. 101-2480 [1] COVER  
19. 8T-4138 M [2] BOLT (M6X1X20-MM)  
20. 5B-9318 [1] BALL  
21. 6E-3007 [1] SPRING  
22. 6E-4502 [1] PLUG  
23. 4J-7533 [1] SEAL-O-RING  
24. 6E-3019 [1] VALVE  
25. 6E-5153 [1] SPRING  
26. 108-2187 [1] PLUG-PIPE  
27. 9J-0403 [2] SPRING  
28. 9J-0404 [2] PLUG  
29. 9S-8005 [1] PLUG (3/4-16-THD)  
30. 3K-0360 [3] SEAL-O-RING  
31. 106-3659 [1] PISTON  
32. 6E-3013 [2] SEAT  
33. 106-3658 [2] VALVE  
34. 111-8233 [1] SPRING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830326
 

6E-3028: VALVE GP-CONTROL

6E-3028 VALVE GP-CONTROL -ARTICULATION
S/N 1241-UP
PART OF 6E-3032 VALVE GP-BANK 4
i00124663 SEBP3683
6E3028 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3044 [1] BODY  
2. 101-1148 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 102-7412 [1] SPRING  
9. 101-1973 [4] RETAINER  
10. 101-1971 [1] LEVER  
11. 101-1970 [1] LEVER AS  
12. 8M-4437 [2] SEAL-O-RING  
13. 101-1983 [2] RING-BACKUP  
14. 4D-9986 [1] SEAL-O-RING  
15. 101-2480 [1] COVER  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
17. 5B-9318 [1] BALL  
18. 6E-3007 [1] SPRING  
19. 6E-4502 [1] PLUG  
20. 4J-7533 [1] SEAL-O-RING  
21. 6E-3019 [1] VALVE (ARTICULATION)  
22. 6E-5153 [1] SPRING  
23. 108-2187 [1] PLUG-PIPE  
24. 9S-8005 [1] PLUG (3/4-16-THD)  
25. 3K-0360 [3] SEAL-O-RING  
26. 106-3659 [1] PISTON  
27. 6E-3013 [2] SEAT  
28. 106-3658 [2] VALVE (ARTICULATION)  
29. 9J-0403 [2] SPRING  
30. 9J-0404 [2] PLUG  
31. 7J-9933 [2] SEAL-O-RING  
32. 111-8233 [1] SPRING  
  M   METRIC PART
 

#SEBP36830327
 

6E-3029: VALVE GP-CONTROL

6E-3029 VALVE GP-CONTROL -CENTERSHIFT
S/N 1241-UP
PART OF 6E-3032 VALVE GP-BANK 4
i00124664 SEBP3683
6E3029 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3044 [1] BODY  
2. 101-1149 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 102-7412 [1] SPRING  
9. 101-1973 [4] RETAINER  
10. 101-1971 [1] LEVER  
11. 101-1970 [1] LEVER AS  
12. 8M-4437 [2] SEAL-O-RING  
13. 101-1983 [2] RING-BACKUP  
14. 4D-9986 [1] SEAL-O-RING  
15. 101-2480 [1] COVER  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
17. 5B-9318 [1] BALL  
18. 6E-3007 [1] SPRING  
19. 6E-4502 [1] PLUG  
20. 4J-7533 [1] SEAL-O-RING  
21. 6E-3019 [1] VALVE  
22. 6E-5153 [1] SPRING  
23. 108-2187 [1] PLUG-PIPE  
24. 9S-8005 [1] PLUG (3/4-16-THD)  
25. 3K-0360 [3] SEAL-O-RING  
26. 106-3659 [1] PISTON  
27. 6E-3013 [2] SEAT  
28. 106-3658 [2] VALVE  
29. 9J-0403 [2] SPRING  
30. 9J-0404 [2] PLUG  
31. 7J-9933 [2] SEAL-O-RING  
32. 111-8233 [1] SPRING  
  M   METRIC PART
 

#SEBP36830328
 

6E-3030: VALVE GP-CONTROL

6E-3030 VALVE GP-CONTROL -WHEEL LEAN
S/N 1241-UP
PART OF 6E-3032 VALVE GP-BANK 4
i00124665 SEBP3683
6E3030 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3044 [1] BODY  
2. 101-1154 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 102-7412 [1] SPRING  
9. 101-1973 [4] RETAINER  
10. 101-1971 [1] LEVER  
11. 101-1970 [1] LEVER AS  
12. 8M-4437 [2] SEAL-O-RING  
13. 101-1983 [2] RING-BACKUP  
14. 4D-9986 [1] SEAL-O-RING  
15. 101-2480 [1] COVER  
16. 8T-4138 M [2] BOLT (M6X1X20-MM)  
17. 5B-9318 [1] BALL  
18. 6E-3007 [1] SPRING  
19. 6E-4502 [1] PLUG  
20. 4J-7533 [1] SEAL-O-RING  
21. 6E-3019 [1] VALVE  
22. 6E-5153 [1] SPRING  
23. 108-2187 [1] PLUG-PIPE  
24. 9S-8005 [1] PLUG (3/4-16-THD)  
25. 3K-0360 [3] SEAL-O-RING  
26. 106-3659 [1] PISTON  
27. 6E-3013 [2] SEAT  
28. 106-3658 [2] VALVE  
29. 9J-0403 [2] SPRING  
30. 9J-0404 [2] PLUG  
31. 7J-9933 [2] SEAL-O-RING  
32. 111-8233 [1] SPRING  
  M   METRIC PART
 

#SEBP36830329
 

6E-3031: VALVE GP-CONTROL

6E-3031 VALVE GP-CONTROL -BLADE LIFT
S/N 1241-UP
PART OF 6E-3032 VALVE GP-BANK 4
i00124666 SEBP3683
6E3031 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3043 [1] BODY  
2. 101-1150 [1] STEM  
3. 101-1980 [1] HOUSING  
4. 101-1972 [1] DETENT  
5. 5B-9318 [1] BALL  
6. 8T-6869 M [2] BOLT (M8X1.25X60-MM)  
7. 2K-8199 [2] SEAL-O-RING  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 101-1984 [1] BODY  
11. 102-7412 [1] SPRING  
12. 101-1973 [4] RETAINER  
13. 101-1971 [1] LEVER  
14. 101-1970 [1] LEVER AS  
15. 8M-4437 [2] SEAL-O-RING  
16. 101-1983 [2] RING-BACKUP  
17. 4D-9986 [1] SEAL-O-RING  
18. 101-2480 [1] COVER  
19. 8T-4138 M [2] BOLT (M6X1X20-MM)  
20. 6E-3007 [1] SPRING  
21. 6E-4502 [1] PLUG  
22. 4J-7533 [1] SEAL-O-RING  
23. 6E-3019 [1] VALVE (BLADE LIFT)  
24. 6E-5153 [1] SPRING  
25. 108-2187 [1] PLUG-PIPE  
26. 9S-8005 [1] PLUG (3/4-16-THD)  
27. 3K-0360 [3] SEAL-O-RING  
28. 106-3660 [2] PISTON  
29. 6E-3013 [2] SEAT  
30. 106-3658 [2] VALVE  
31. 9J-0403 [2] SPRING  
32. 9J-0404 [2] PLUG  
33. 7J-9933 [2] SEAL-O-RING  
34. 6E-3033 Y [1] VALVE GP-RELIEF  
35. 108-4916 Y [1] DETENT GP-CONTROL VALVE  
36. 111-8234 [1] SPRING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Hydraulic System Oil Sample - Obtain
120H and 135H Motor Graders
Hydraulic System Oil Level - Check
120H and 135H Motor Graders
Hydraulic System Oil - Change
120H and 135H Motor Graders
Hydraulic System Oil Filter - Replace
120H and 135H Motor Graders
Technical Information Bulletin
Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}
Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}
Specifications
Hydraulic Tank and Filter
120H and 135H Motor Graders Hydraulic and Steering System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank and Filter - Remove and Install
120H and 135H Motor Graders Machine Systems
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 120H :

TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
173-1011 SWIVEL GP
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP
PUMP GP-PISTON
200-1934 PUMP GP-PISTON
PUMP GP-PISTON
169-4883 PUMP GP-PISTON
PUMP GP-METERING
102-1501 PUMP GP-METERING
VALVE & LINKAGE GP
7I-4622 VALVE & LINKAGE GP
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
VALVE GP-BANK 5
104-8645 VALVE GP-BANK 5
VALVE GP-COMBINATION
229-7155 VALVE GP-COMBINATION
VALVE GP-CONTROL
107-0545 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-3028 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-3029 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-3030 VALVE GP-CONTROL

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.