AVSPARE.COM
parts catalog

138-2028 PLUG GP-CYLINDER BLOCK S/N 3PD1-12556 PART OF 160-5101 ENGINE AR 140H MOTOR GRADER


BASIC ENGINE
CYLINDER BLOCK GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
SUPPRESSION GP-SOUND
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL


BASIC ENGINE

CYLINDER BLOCK GP
 

#SEBP36840050
 

138-2028: PLUG GP-CYLINDER BLOCK

138-2028 PLUG GP-CYLINDER BLOCK
S/N 3PD1-12556
PART OF 160-5101 ENGINE AR
i01855306 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-4182 [1] PLUG (7/16-20-THD)(7/16-20 THD)  
  9S-4191 [1] PLUG (9/16-18-THD)(9/16-18 THD)  
  8T-6762 [1] PLUG-PIPE (1/2-14-THD)(1/4-14NPTF THD)  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
  6V-5048 [1] SEAL-O-RING (8.92MM ID)  
 

#SEBP36840051
 

265-3855: PLUG GP-CYLINDER BLOCK

265-3855 PLUG GP-CYLINDER BLOCK
S/N 3PD12557-UP
PART OF 160-5101, 285-6403 ENGINE AR
i02339549 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-4182 N [1] PLUG (7/16-20-THD)  
  9S-8005 H [1] PLUG (3/4-16-THD)  
  9S-4191 J [1] PLUG (9/16-18-THD)  
  6V-6609 H [1] SEAL-O-RING  
  6V-5048 N [1] SEAL-O-RING  
  3J-1907 J [1] SEAL-O-RING  
  H   USE IN WATER MANIFOLD BLEED OPENING
  J   USE IN FUEL PRESSURE OPENING
  N   USE IN TIMING PROBE OPENING (CYL BLOCK - RIGHT SIDE)
 

#SEBP36840052
 

174-1760: PLUG GP-ENGINE

174-1760 PLUG GP-ENGINE
S/N 3PD1-UP
PART OF 160-5101, 285-6403 ENGINE AR
i01855516 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [1] PLUG-CUP  
2. 116-5435 [1] CONNECTOR  
3. 3J-1907 [2] SEAL-O-RING  
4. 3K-0360 [1] SEAL-O-RING  
5. 6V-0852 [1] CAP-DUST  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 6V-4589 [1] SEAL-O-RING  
8. 6V-5049 [3] SEAL-O-RING  
9. 6V-8397 [1] SEAL-O-RING  
11. 9S-4191 [3] PLUG (9/16-18-THD)  
12. 9S-8006 [1] PLUG (7/8-14-THD)  
13. 9X-6650 [1] CONNECTOR-O-RING  
 

#SEBP36840053
 

115-9397: ROCKER ARM GP

115-9397 ROCKER ARM GP
S/N 3PD1-UP
PART OF 117-2749 VALVE MECHANISM GP
i01855734 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9398 [2] ARM-VALVE ROCKER (EXHAUST)  
2. 115-9400 [2] ARM AS (UNIT INJECTION)  
    (EACH INCLUDES)
  2D-6642 [2] BALL  
  115-9402 [1] BEARING  
3. 115-9399 [2] ARM-VALVE ROCKER (INLET)  
4. 7C-1798 [2] SCREW-ARM ADJUSTMENT  
5. 245-6095 [2] NUT-HEX THIN (M12X1.5-THD)(CLASS 10, HEAT TREATED)  
6. 258-8721 [2] BUTTON  
7. 8L-2777 [2] SEAL-O-RING  
8. 115-9403 [2] SHAFT AS  
    (EACH INCLUDES)
9. 3S-6605 [1] PLUG-CUP  
10. 096-0014 [1] PIN-SPRING  
11. 185-4461 [2] SUPPORT AS  
    (EACH INCLUDES)
12. 180-1538 [2] DOWEL  
13. 183-4365 M [4] SCREW-ADJUSTMENT (M10X1.5-THD)  
14. 2Y-5829 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36840054
 

116-1091: SEAL GP-CRANKSHAFT

116-1091 SEAL GP-CRANKSHAFT
S/N 3PD1-UP
PART OF 160-5101, 285-6403 ENGINE AR
i01855581 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-2323 [1] COVER  
2. 8T-0640 M [6] BOLT (M6X1X30-MM)  
3. 5P-0537 [13] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 294-6007 [7] BOLT-HEAD LOCKING (M6X1X18-MM)  
5. 7C-1583 [1] GASKET  
6. 226-4757 [1] SEAL GP-CRANKSHAFT  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36840055
 

174-1627: SUPPORT GP-ENGINE

174-1627 SUPPORT GP-ENGINE
S/N 3PD1-UP
PART OF 160-5101, 285-6403 ENGINE AR
i01855510 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-1628 [1] SUPPORT-FRONT  
2. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 6V-8336 M [8] BOLT (M12X1.75X70-MM)  
  M   METRIC PART
 

#SEBP36840056
 

178-9527: SUPPRESSION GP-SOUND

178-9527 SUPPRESSION GP-SOUND -ENGINE ENCLOSURE
S/N CCA1-UP
PART OF 207-4453, 210-2044 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i01820529 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-2302 [1] INSULATION (RH)  
2. 183-2303 [1] PANEL (LH)  
3. 183-2304 [1] PANEL (FRONT)  
4. 183-2306 [2] INSULATION (BLOCK)  
 

#SEBP36840057
 

278-0158: SUPPRESSION GP-SOUND

278-0158 SUPPRESSION GP-SOUND
S/N CCA1973-UP
PART OF 277-5453 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i02579711 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-9955 [2] CLIP  
2. 199-9956 [2] CLIP  
3. 278-0163 [1] PANEL-INSULATION  
4. 278-0167 [1] PANEL-INSULATION  
5. 278-0168 [1] PANEL-INSULATION  
6. 278-0170 [1] PANEL-INSULATION  
7. 278-0172 [2] INSULATION (BLOCK)  
 

#SEBP36840058
 

117-2749: VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP
S/N 3PD1-UP
PART OF 160-5101, 285-6403 ENGINE AR
i01855226 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
2. 8T-0275 M [4] BOLT (M6X1X50-MM)  
3. 3E-4352 [8] WASHER-HARD (8.8X20.5X2.5-MM THK)  
4. 8T-0100 M [16] BOLT (M8X1.25X60-MM)  
5. 7C-8292 [8] ISOLATOR  
6. 9Y-7215 [8] SLEEVE-ISOLATOR  
7. 9Y-4357 [1] BREATHER AS (CRANKCASE)  
8. 9Y-1758 [1] GASKET (CRANKCASE BREATHER)  
9. 102-5842 [1] BASE-VALVE MECHANISM COVER  
10. 109-5309 [1] GASKET-VALVE COVER (VALVE COVER BASE)  
11. 115-9397 Y [3] ROCKER ARM GP  
12. 148-2063 Y [2] LIFTER GP-VALVE  
13. 341-8888 [12] PUSHROD-VALVE  
14. 341-8889 [6] PUSHROD-INJECTOR  
15. 9M-1974 [9] WASHER-HARD (8.8X16X2-MM THK)  
16. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840059
 

166-1329: BASE GP-OIL FILTER

166-1329 BASE GP-OIL FILTER -ENGINE
S/N 3PD1-UP
PART OF 164-2490 FILTER GP-ENGINE OIL
Type 1
i01855657 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
2. 166-1328 [1] BASE AS  
2A. 2P-4304 [1] STUD-HOLLOW  
2B. 3B-0623 [1] PLUG-CUP  
2C. 3P-1896 [2] PLUG-CUP  
2D. 7W-6390 [1] STUD-FILTER BASE  
3. 6V-4367 [3] SEAL-O-RING  
4. 6V-3940 M [3] BOLT (M8X1.25X25-MM)  
5. 7C-2891 [3] COVER  
6. 7C-3954 [1] SPRING AS  
6A. 2N-6005 SPRING  
7. 111-2645 [1] VALVE-PUMP BYPASS (ENGINE OIL FILTER)  
8. 6V-8359 M [1] BOLT (M6X1X70-MM)  
9. 7C-3083 [1] SEAT-RELIEF VALVE SPRING  
10. 7C-3082 [1] RETAINER  
11. 7C-3081 [1] SPACER (6.88X9.53X50-MM THK)  
12. 1A-2170 [1] SPRING-RETAINER  
13. 9M-0853 [2] PLUNGER-VALVE  
14. 288-3803 [2] SPRING AS  
    (EACH INCLUDES)
14A. 4N-8150 SPRING  
15. 9S-4185 [1] PLUG (3/4-16-THD)  
16. 8L-2786 [1] SEAL-O-RING  
17. 9X-2097 M [3] STUD (M8X1.25-THD)  
  M   METRIC PART
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Main Bearings - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Liner - Install
3176C and 3196 Engines For Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Main Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines
Cylinder Liner - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Bearings - Remove
3176C and 3196 Engines For Caterpillar Built Machines

Caterpillar Parts SIS Catalog 140H :

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.