AVSPARE.COM
parts catalog

3E-8700 SENSOR GP-TEMPERATURE S/N EDB1-UP; BJN1-99999 PART OF 180-9146 CASE & PARTS GP-TRANSMISSION 140H




ELECTRICAL AND STARTING SYSTEM

SENSOR GP
 

#SEBP36840270
 

3E-8700: SENSOR GP-TEMPERATURE

3E-8700 SENSOR GP-TEMPERATURE
S/N EDB1-UP; BJN1-99999
PART OF 180-9146 CASE & PARTS GP-TRANSMISSION
i00671926 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
3. 9X-1813 E SLEEVE (34-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP36840271
 

173-5304: STARTING AID GP-ETHER

173-5304 STARTING AID GP-ETHER -SERVICE
S/N CCA1-3876
PART OF 197-0579 STARTING AID GP-ETHER
AN ATTACHMENT
i01874938 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
2. 3S-2093 [2] STRAP-CABLE  
3. 7N-2059 [1] CLAMP AS (CYLINDER)  
4. 174-5636 [1] TUBE AS  
5. 177-9812 [1] HARNESS AS-STARTING AID  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
7. 033-8248 [1] CLIP (LOOP)  
8. 130-5300 [1] CLIP  
9. 4D-7794 [1] CLIP  
10. 4H-2558 [1] GROMMET  
11. 5C-9553 M [1] BOLT (M6X1X16-MM)  
12. 6V-2686 [1] CLIP  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
17. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
   
  7N-0296 AF [1] CYLINDER AS-ETHER (STARTING AID)  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840272
 

173-5304: STARTING AID GP-ETHER

173-5304 STARTING AID GP-ETHER -SERVICE
S/N CCA3877-UP
PART OF 197-0579 STARTING AID GP-ETHER
AN ATTACHMENT
i02817860 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
2. 3S-2093 [2] STRAP-CABLE  
3. 7N-2059 [1] CLAMP AS (CYLINDER)  
5. 177-9812 [1] HARNESS AS-STARTING AID  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
7. 033-8248 [1] CLIP (LOOP)  
8. 130-5300 [1] CLIP  
9. 4D-7794 [1] CLIP  
10. 4H-2558 [1] GROMMET  
11. 5C-9553 M [1] BOLT (M6X1X16-MM)  
12. 6V-2686 [1] CLIP  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
17. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
18. 5P-5630 CD TUBE (0.8-M)  
19. 8X-2334 C [1] CONNECTOR  
20. 230-0917 C [1] FITTING AS  
   
  7N-0296 AF [1] CYLINDER AS-ETHER (STARTING AID)  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840273
 

197-0579: STARTING AID GP-ETHER

197-0579 STARTING AID GP-ETHER
S/N CCA1-UP
PART OF 197-5955, 236-3948 SNOW AR-MOTOR GRADER
AN ATTACHMENT
i01874934 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  173-5304 Y [1] STARTING AID GP-ETHER (SERVICE)  
  197-0580 Y [1] STARTING AID GP-ETHER (ENGINE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840274
 

197-0580: STARTING AID GP-ETHER

197-0580 STARTING AID GP-ETHER -ENGINE
S/N CCA1-UP
PART OF 197-0579 STARTING AID GP-ETHER
AN ATTACHMENT
i01874940 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5606 [1] ATOMIZER-ETHER  
2. 7N-3725 [2] BRACKET  
3. 175-1367 [2] SPACER (8.8X16X10-MM THK)  
4. 176-6391 [1] TUBE  
5. 3E-8768 [1] SWITCH AS (24-VOLT)(ETHER STARTING AID)  
  3E-8825 [1] LAMP (24-VOLT)(ETHER STARTING AID)  
  3E-8776 [1] ACTUATOR  
6. 6V-2686 [2] CLIP  
7. 8T-3647 M [2] BOLT (M8X1.25X80-MM)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
10. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
11. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP36840275
 

165-4619: STARTING MOTOR GP-ELECTRIC

165-4619 STARTING MOTOR GP-ELECTRIC
S/N 3PD1-UP
24 VOLT
PART OF 174-0620 STARTING MOTOR GP-ELECTRIC
i01855720 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 212-0443 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATOR TERMINALS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 1H-2629 [2] STRIP-INSULATION  
17. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
18. 7T-3276 [1] ARMATURE AS (24-VOLT)  
19. 7T-3973 [1] HOUSING AS-LEVER  
20. 4M-1831 [1] PLUG-LEVER HOUSING  
21. 7L-2894 [1] GASKET  
22. 0S-1597 [5] BOLT (1/4-28X1-IN)  
23. 184-6964 [1] DRIVE AS-MOTOR  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
26. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES BOLT, NUTS, COVER & CONNECTORS)
27. 6V-8378 [2] NUT (10-32-THD)  
28. 8F-1434 [2] LOCKWASHER  
29. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
30. 9X-4824 [1] COVER-STARTING MOTOR  
   
    AVAILABLE REPAIR KIT(S):
  8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
  8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSH,SPRING,SCREW,SEAL & SCREW ASSEMBLY)
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS WICKS,CUPS SEALS,GASKET,
    SCREW ASSEMBLIES,WASHERS,SPACER & NUT)
  7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES,SEALS,NUT,GASKET & RETAINER)
 

#SEBP36840276
 

174-0620: STARTING MOTOR GP-ELECTRIC

174-0620 STARTING MOTOR GP-ELECTRIC
S/N 3PD1-UP
24 VOLT
PART OF 160-5101, 285-6403 ENGINE AR
i01855451 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1059 [1] GASKET  
2. 105-4728 [1] WIRE AS  
3. 165-4619 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 6V-0371 [3] BOLT (5/8-11X1.375-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840277
 

164-7577: SWITCH GP-BYPASS

164-7577 SWITCH GP-BYPASS -TRANSMISSION OIL FILTER-OIL FILTER BYPASS
S/N CCA1-UP
PART OF 238-1029, 333-9308 BASE GP-OIL FILTER, 207-3819 FILTER GP-OIL
ALSO AN ATTACHMENT
i01327625 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 BE SLEEVE  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
5. 3D-2824 [1] SEAL-O-RING  
6. Z [1] SWITCH AS  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

#SEBP36840278
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N CCA1-UP
12-VOLT
PART OF 178-0163 WIRING GP-REAR
ALSO AN ATTACHMENT
i00125346 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 264-3617 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

#SEBP36840279
 

161-1018: SWITCH GP-LIGHT

161-1018 SWITCH GP-LIGHT
S/N CCA1-UP
PART OF 161-0770 LIGHTING AR-FLOOD & SIGNAL
AN ATTACHMENT
i01683219 SEBP3684
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5153 [1] FILM-FACE (TURN SIGNAL, HAZARD)  
2. 8X-5154 [1] FILM-FACE (HEADLIGHTS HIGH, LOW BEAM)  
3. 9W-1442 [1] FUSE (10-AMPERE)  
4. 173-3064 [1] SWITCH GP-ROTARY (TURN SIGNAL, HAZARD)  
  5L-7200 [1] SCREW (8-32X0.375-IN)  
  9B-7233 [1] LOCKWASHER  
5. 108-0358 [1] FLASHER AS (24-VOLT)(TURN SIGNAL, HAZARD)  
6. 103-5678 [1] SWITCH AS-ROTARY (HIGH, LOW BEAM)  
  5L-7200 [1] SCREW (8-32X0.375-IN)  
  9B-7233 [1] LOCKWASHER  
7. 3E-8772 [1] SWITCH-ROCKER (24-VOLT)(HEADLIGHTS, TAIL LIGHTS)  
  3E-8825 [2] LAMP (24-VOLT)  
  3E-9326 [1] ACTUATOR  
8. 5C-2890 M [2] NUT (M6X1-THD)  
9. 8X-6296 [1] LEVER (TURN SIGNAL)  
9A. 8X-6296 [1] LEVER (HEADLIGHT DIMMER)  
10. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
11. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

Information:

Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor - Calibrate
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Speed/Timing Sensor - Calibrate
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Camshaft Position Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine

Caterpillar Parts SIS Catalog 140H :

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.