AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

161-1921 WIRING GP-CAB -WARNING BEACON S/N CCA1-UP PART OF 197-5955, 236-3948 SNOW AR-MOTOR GRADER AN ATTACHMENT 140H


ELECTRICAL AND STARTING SYSTEM
WIRING GP

MOTOR GRADER 140H MOTOR GRADER CCA
 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3684 140H CCA   (2002)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-BLADE CUSHION
161-1022 WIRING GP-BLADE CUSHION
WIRING GP-CAB
159-5878 WIRING GP-CAB
WIRING GP-CAB
161-1921 WIRING GP-CAB
WIRING GP-CAB
193-7359 WIRING GP-CAB
WIRING GP-CAB
203-6551 WIRING GP-CAB
WIRING GP-CAB
204-6127 WIRING GP-CAB
 

#SEBP36840290
 

161-1921: WIRING GP-CAB

161-1921 WIRING GP-CAB -WARNING BEACON
S/N CCA1-UP
PART OF 197-5955, 236-3948 SNOW AR-MOTOR GRADER
AN ATTACHMENT
i01839047 SEBP3684
1611921 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1442 [1] FUSE (10-AMPERE)(WARNING BEACON)  
2. 239-9362 Y [1] INSTALLATION GP-WARNING BEACON  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840291
 

193-7359: WIRING GP-CAB

193-7359 WIRING GP-CAB -EU
S/N CCA1-UP
PART OF 207-4453, 210-2044, 277-5453 CONVERSION AR-CERTIFICATION, 218-4759 ROPS GP
AN ATTACHMENT
i01718936 SEBP3684
1937359 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [3] PLUG (ROCKER SWITCH)  
2. 3E-0155 Y [2] SWITCH GP-WIPER (24-VOLT, INTERMITTENT)(FRONT)  
3. 3E-6389 Y [1] LAMP GP-DOME (24-VOLT)  
4. 3S-2093 [23] STRAP-CABLE  
5. 131-5171 [1] CLIP  
6. 6V-6578 [2] RIVET-BLIND  
8. 9W-1441 [1] FUSE (15-AMPERE)  
9. 160-6382 [1] GROMMET  
10. 167-7504 [1] HARNESS AS-CAB (FRONT)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
11. 167-7505 [1] HARNESS AS-CAB (REAR)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
12. 169-8938 [1] PLATE AS  
13. 172-6555 [1] PANEL  
14. 172-8641 [1] PLATE  
15. 172-9316 [1] FILM-FUSE  
16. 196-9373 [1] HARNESS AS-CAB (SWITCH PANEL)  
  174-7566 [1] BLOCK AS-FUSE  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (KITS INCLUDE PLUG AS & WEDGE)
  127-5484 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  102-8802 [11] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (KITS INCLUDE RECEPTACLE AS & WEDGE)
17. 096-6166 [3] WASHER-HARD (4.5X9X1-MM THK)  
18. 5C-8312 M [3] NUT (M4X0.7-THD)  
19. 6V-5645 [4] SCREW-MACHINE (10-32X0.87-IN)  
20. 6V-8801 [1] NUT (3/8-16-THD)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 9X-1046 M [3] SCREW (M4X0.7X18-MM)  
23. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
24. 7X-7877 E STRIP-EDGE (10-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840292
 

203-6551: WIRING GP-CAB

203-6551 WIRING GP-CAB -MOLDBOARD
S/N CCA1-UP
PART OF 203-6536 LIGHTING AR-FLOOD
AN ATTACHMENT
i01683945 SEBP3684
2036551 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [5] PLUG (ROCKER SWITCH)  
2. 3S-2093 [2] STRAP-CABLE  
3. 9W-1442 [1] FUSE (10-AMPERE)  
4. 145-3350 [1] PLATE  
5. 153-2147 [1] PLATE  
6. 168-8243 [1] HARNESS AS-PANEL  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES A PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES A RECEPTACLE AS & WEDGE)
7. 172-6556 [1] PANEL  
8. 188-3862 [1] BRACKET AS  
9. 3E-8766 [1] SWITCH AS (24-VOLT)(MOLDBOARD)  
  3E-8782 [1] ACTUATOR  
  3E-8825 [1] LAMP (24-VOLT)  
10. 9X-2043 M [6] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
 

#SEBP36840293
 

204-6127: WIRING GP-CAB

204-6127 WIRING GP-CAB -MOLDBOARD
S/N CCA1-UP
PART OF 204-6109 LIGHTING AR-FLOOD
AN ATTACHMENT
i01684026 SEBP3684
2046127 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [5] PLUG (ROCKER SWITCH)  
2. 3S-2093 [2] STRAP-CABLE  
3. 9W-1442 [1] FUSE (10-AMPERE)  
4. 145-3350 [1] PLATE  
5. 153-2147 [1] PLATE  
6. 172-6556 [1] PANEL  
7. 188-3862 [1] BRACKET AS  
8. 196-8557 [1] HARNESS AS-CAB  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
9. 3E-8766 [1] SWITCH AS (24-VOLT)(MOLDBOARD)  
  3E-8782 [1] ACTUATOR  
  3E-8825 [1] LAMP (24-VOLT)  
10. 9X-2043 M [6] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
 

#SEBP36840294
 

223-3941: WIRING GP-CAB

223-3941 WIRING GP-CAB
S/N CCA1-UP
PART OF 223-3937 CAB GP
AN ATTACHMENT
i01822007 SEBP3684
2233941 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-7877 E STRIP-EDGE (10-CM)  
2. 3E-6389 Y [1] LAMP GP-DOME (24-VOLT)  
3. 3S-2093 [6] STRAP-CABLE  
4. 3V-4694 [1] PLUG-BUTTON  
5. 7T-9302 [1] KNOB AS-WIPER SWITCH (WASHER)  
  014-0816 [1] SETSCREW (8-32X0.5-IN)  
6. 112-6174 [1] SWITCH GP-ROTARY (WIPER, WASHER)(FRONT WIPER)  
  2H-3920 [1] LOCKWASHER  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  6V-8369 [1] NUT (7/16-28-THD)  
  186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 129-4647 [1] PLATE  
8. 169-8938 [1] PLATE AS  
9. 171-6561 [1] FILM (WINDOW WASHER)  
10. 223-3939 [1] HARNESS AS-WINDOW WIPER (CONTROL)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
11. 223-3940 [1] HARNESS AS-WINDOW WIPER (FUSE BOX)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  127-5484 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
12. 096-6166 [3] WASHER-HARD (4.5X9X1-MM THK)  
13. 3K-8782 [1] FUSE (10-AMPERE)  
14. 4K-5122 [1] HOLDER AS-FUSE  
    (EACH INCLUDES)
  6T-8115 [1] NUT (1/2-24-THD)  
  139-0178 [1] CAP  
15. 5C-8312 M [3] NUT (M4X0.7-THD)  
16. 6V-6578 [2] RIVET-BLIND  
17. 6V-8801 [1] NUT (3/8-16-THD)  
18. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 9X-1046 M [3] SCREW (M4X0.7X18-MM)  
20. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840295
 

159-5839: WIRING GP-CONSOLE

159-5839 WIRING GP-CONSOLE
S/N CCA1-1327; CCA1334-1336
PART OF 159-4615 GENERAL AR
i01674814 SEBP3684
1595839 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [4] PLUG (ROCKER SWITCH)  
2. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
3. 3S-2093 [5] STRAP-CABLE  
4. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
5. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
6. 110-7887 [1] SWITCH AS-START (KEY)  
  3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
8. 167-7506 [1] HARNESS AS-OPERATOR CONTROLS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
9. 167-7536 [1] HARNESS AS-CONSOLE  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
10. 169-5414 [2] CLIP  
11. 196-7268 [1] SWITCH AS (THROTTLE SPEED SET)  
  3E-8825 [2] LAMP (24-VOLT)  
  183-2136 [1] ACTUATOR  
12. 190-0370 [1] SWITCH AS (THROTTLE HOLD MODE)  
  3E-8825 [2] LAMP (24-VOLT)  
  187-9380 [1] ACTUATOR  
13. 130-5300 [2] CLIP  
14. 2V-8259 [2] GROMMET  
15. 3H-2900 [1] GROMMET  
16. 4D-7794 [1] CLIP  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 4P-7581 [1] CLIP (LADDER)  
19. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
20. 5S-4246 [4] LOCKWASHER  
21. 6B-4540 [4] NUT (4-40-THD)  
22. 6V-2480 [4] SCREW (4-40X0.5-IN)  
23. 6V-8801 [1] NUT (3/8-16-THD)  
24. 7C-4354 [1] CLIP  
25. 7G-7053 [1] GROMMET  
26. 8M-2770 [1] CLIP (LOOP)  
27. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
29. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
31. 3E-9327 [1] SWITCH AS (CENTERSHIFT PIN PULLER)  
  3E-8817 [1] ACTUATOR  
  3E-8825 [1] LAMP (24-VOLT)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840296
 

159-5839: WIRING GP-CONSOLE

159-5839 WIRING GP-CONSOLE
S/N CCA1328-1333; CCA1337-UP
PART OF 159-4615 GENERAL AR
i02296843 SEBP3684
1595839 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [4] PLUG (ROCKER SWITCH)  
2. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
3. 3S-2093 [5] STRAP-CABLE  
4. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
5. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
6. 110-7887 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)(KEY SWITCH)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 167-7506 [1] HARNESS AS-OPERATOR CONTROLS  
  199-8382 [1] RECEPTACLE AS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)(ACTION ALARM)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
9. 169-5414 C [3] CLIP  
10. 196-7268 [1] SWITCH AS (THROTTLE HOLD MODE)  
  3E-8825 [2] LAMP (24-VOLT)  
  183-2136 [1] ACTUATOR  
11. 185-2197 [1] SWITCH AS-ROCKER (THROTTLE LOCK SET, RESET)  
12. 254-9249 C [1] HARNESS AS-CONSOLE  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
13. 130-5300 C [1] CLIP  
15. 3H-2900 [3] GROMMET  
16. 4D-7794 [1] CLIP  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 4P-7581 [1] CLIP (LADDER)  
19. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
20. 5S-4246 [4] LOCKWASHER  
21. 6B-4540 [4] NUT (4-40-THD)  
22. 6V-2480 [4] SCREW (4-40X0.5-IN)  
23. 6V-8801 [1] NUT (3/8-16-THD)  
24. 7C-4354 [1] CLIP  
25. 7G-7053 [1] GROMMET  
26. 8M-2770 [1] CLIP (LOOP)  
27. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
29. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
31. 3E-9327 [1] SWITCH AS (CENTERSHIFT PIN)  
  3E-8817 [1] ACTUATOR  
  3E-8825 [1] LAMP (24-VOLT)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840297
 

159-5841: WIRING GP-CONSOLE

159-5841 WIRING GP-CONSOLE
S/N CCA1-1329; CCA1334-1336; CCA1973-UP
PART OF 207-4453, 210-2044, 277-5453 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i01684316 SEBP3684
1595841 WIRING GP-CONSOLE Parts scheme 1595841 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [3] PLUG (ROCKER SWITCH)  
2. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
3. 3S-2093 [6] STRAP-CABLE  
4. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
5. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
6. 110-7887 [1] SWITCH AS-START (KEY)  
  3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 132-6640 Y [1] CONTROL GP-SECONDARY STEERING  
9. 167-7506 [1] HARNESS AS-OPERATOR CONTROLS  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
10. 167-7536 [1] HARNESS AS-CONSOLE  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
11. 169-5414 [2] CLIP  
12. 196-7268 [1] SWITCH AS (THROTTLE LOCK ENABLE)  
  183-2136 [1] ACTUATOR  
  3E-8825 [2] LAMP (24-VOLT)  
13. 185-2197 [1] SWITCH AS-ROCKER (THROTTLE LOCK SET, RESET)  
14. 130-5300 [2] CLIP  
15. 2V-8259 [2] GROMMET  
16. 3E-6754 [1] GROMMET  
17. 3H-2900 [1] GROMMET  
18. 4D-7794 [1] CLIP  
19. 4L-6454 [1] BOLT (3/8-16X1-IN)  
20. 4P-7581 [1] CLIP (LADDER)  
21. 5C-2890 M [2] NUT (M6X1-THD)  
22. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
23. 5S-4246 [4] LOCKWASHER  
24. 6B-4540 [4] NUT (4-40-THD)  
25. 6V-2480 [4] SCREW (4-40X0.5-IN)  
26. 6V-8801 [1] NUT (3/8-16-THD)  
27. 7C-4354 [1] CLIP  
28. 7G-7053 [1] GROMMET  
29. 8M-2770 [1] CLIP (LOOP)  
30. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
32. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
34. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
35. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
36. 9X-9633 [1] SWITCH AS-ROCKER (SECONDARY STEERING)  
  3E-8816 [1] ACTUATOR  
  3E-8825 [2] LAMP (24-VOLT)  
37. 3E-9327 [1] SWITCH AS (CENTERSHIFT PIN PULLER)  
  3E-8825 [1] LAMP (24-VOLT)  
  3E-8817 [1] ACTUATOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840298
 

159-5841: WIRING GP-CONSOLE

159-5841 WIRING GP-CONSOLE
S/N CCA1330-1333; CCA1337-UP
PART OF 207-4453, 210-2044, 277-5453 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i02297058 SEBP3684
1595841 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0109 [3] PLUG (ROCKER SWITCH)  
2. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
3. 3S-2093 [6] STRAP-CABLE  
4. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
5. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
6. 110-7887 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUCES RECEPTACLE AS & WEDGE)
8. 132-6640 Y [1] CONTROL GP-SECONDARY STEERING  
9. 167-7506 [1] HARNESS AS-OPERATOR CONTROLS  
  199-8382 [1] RECEPTACLE AS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
10. 169-5414 C [3] CLIP  
11. 196-7268 [1] SWITCH AS (THROTTLE HOLD MODE)  
  3E-8825 [2] LAMP (24-VOLT)  
  183-2136 [1] ACTUATOR  
12. 185-2197 [1] SWITCH AS-ROCKER (THROTTLE LOCK SET, RESET)  
13. 254-9249 C [1] HARNESS AS-CONSOLE  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
14. 130-5300 C [1] CLIP  
15. 2V-8259 [2] GROMMET  
16. 3E-6754 [1] GROMMET  
17. 3H-2900 [1] GROMMET  
18. 4D-7794 [1] CLIP  
19. 4L-6454 [1] BOLT (3/8-16X1-IN)  
20. 4P-7581 [1] CLIP (LADDER)  
21. 5C-2890 M [2] NUT (M6X1-THD)  
22. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
23. 5S-4246 [4] LOCKWASHER  
24. 6B-4540 [4] NUT (4-40-THD)  
25. 6V-2480 [4] SCREW (4-40X0.5-IN)  
26. 6V-8801 [1] NUT (3/8-16-THD)  
27. 7C-4354 [1] CLIP  
28. 7G-7053 [1] GROMMET  
29. 8M-2770 [1] CLIP (LOOP)  
30. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
32. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
34. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
35. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
36. 3E-8765 [1] SWITCH AS (24-VOLT)(SECONDARY STEERING TEST)  
  3E-8825 [2] LAMP (24-VOLT)  
  3E-8816 [1] ACTUATOR  
37. 3E-9327 [1] SWITCH AS (CENTERSHIFT PIN PULLER)  
  3E-8825 [1] LAMP (24-VOLT)  
  3E-8817 [1] ACTUATOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840299
 

171-1103: WIRING GP-ENGINE

171-1103 WIRING GP-ENGINE
S/N 3PD1-UP
PART OF 160-5101 ENGINE AR
Type 1
i01855441 SEBP3684
1711103 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7077 [1] SPACER (0.406X0.62X0.37-IN THK)  
2. 3E-7448 [1] CONNECTOR  
3. 3S-2093 [5] STRAP-CABLE  
4. 4P-5918 [1] CLIP  
5. 9X-0262 [1] ADAPTER  
6. 197-8391 Y [1] SENSOR GP-TEMPERATURE (INLET MANIFOLD)  
7. 197-8392 Y [1] SENSOR GP-TEMPERATURE (WATER COOLANT)  
8. 197-8393 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
9. 197-8394 Y [1] SENSOR GP-PRESSURE (FUEL)  
10. 197-8395 Y [1] SENSOR GP-PRESSURE (INLET MANIFOLD)  
11. 197-8396 Y [1] SENSOR GP-SPEED (CRANKSHAFT)  
12. 197-8397 Y [1] SENSOR GP-SPEED (CAMSHAFT)  
13. 164-9609 [1] ELBOW-PIPE  
14. 222-4086 [1] HARNESS AS (ENGINE ELECTRONIC)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  3S-2093 [2] STRAP-CABLE (MODULE CONNECTOR)  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)(AIR INLET HEATER)  
16. 3E-4353 [1] WASHER-HARD (11X25X3-MM THK)  
17. 4D-7794 [1] CLIP  
18. 4K-8864 [2] CLIP (LOOP)  
19. 4P-8134 [3] CLIP (LADDER)  
20. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
21. 6V-5048 [2] SEAL-O-RING  
22. 6V-5049 [1] SEAL-O-RING  
23. 6V-5215 M [2] BOLT (M8X1.25X16-MM)  
24. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
25. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
26. 6V-7981 M [1] BOLT (M10X1.5X70-MM)  
27. 6V-8214 M [2] BOLT (M6X1X20-MM)  
28. 6V-8837 M [1] BOLT (M6X1X16-MM)  
29. 8J-1256 [1] CLIP (LOOP)  
30. 8M-2770 [4] CLIP (LOOP)  
31. 8M-2771 [1] CLIP  
32. 8T-0642 M [1] BOLT (M8X1.25X14-MM)  
33. 8T-8737 [2] PLUG-SEAL  
34. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 9S-4191 [1] PLUG (9/16-18-THD)  
36. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
37. 197-8391 Y [1] SENSOR GP-TEMPERATURE (FUEL)  
38. 197-8394 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines
CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines
CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 140H :

WIRING GP-CAB
159-5878 WIRING GP-CAB
WIRING GP-BLADE CUSHION
161-1022 WIRING GP-BLADE CUSHION
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER
SWITCH GP-WIPER
275-7764 SWITCH GP-WIPER
SWITCH GP-WIPER
275-7741 SWITCH GP-WIPER
SWITCH GP-MAGNETIC
3E-0154 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
254-3783 SWITCH GP-MAGNETIC
WIRING GP-CAB
193-7359 WIRING GP-CAB
WIRING GP-CAB
203-6551 WIRING GP-CAB
WIRING GP-CAB
204-6127 WIRING GP-CAB
WIRING GP-CAB
223-3941 WIRING GP-CAB
WIRING GP-CONSOLE
159-5839 WIRING GP-CONSOLE
WIRING GP-CONSOLE
159-5839 WIRING GP-CONSOLE
WIRING GP-CONSOLE
159-5841 WIRING GP-CONSOLE
WIRING GP-CONSOLE
159-5841 WIRING GP-CONSOLE

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.