AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

115-0791 VALVE & LINKAGE GP -BANK 6-LH,RH S/N CCA1-UP AN ATTACHMENT 140H MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP

MOTOR GRADER 140H MOTOR GRADER CCA
 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3684 140H CCA   (2002)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
107-3856 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-5499 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0791 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0805 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4083 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4084 VALVE & LINKAGE GP
 

#SEBP36840670
 

115-0791: VALVE & LINKAGE GP

115-0791 VALVE & LINKAGE GP -BANK 6-LH,RH
S/N CCA1-UP
AN ATTACHMENT
i00852187 SEBP3684
1150791 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-1008 Y [1] VALVE GP-BANK 6 (RH)  
2. 104-8648 Y [1] VALVE GP-BANK 6 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4276 [12] ROD  
  6V-8186 [24] NUT-FULL (5/16-24-THD)  
  7H-3641 [24] END-ROD (5/16-24-THD)  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 8D-5640 [14] BEARING  
10. 8D-5636 B [4] SHIM (0.254-MM THK)  
11. 8D-5637 B [4] SHIM (0.762-MM THK)  
12. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
13. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
14. 3F-9556 [24] LOCKWASHER  
15. 8D-5641 [12] BEARING  
16. 2G-6757 [1] KNOB-BLADE LIFT  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 2G-6749 [1] KNOB-SIDESHIFT  
19. 2G-6747 [1] KNOB-BLADE TIP  
20. 8D-5632 [2] LEVER  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 2G-7108 [1] KNOB-WING TILT  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 103-1597 [2] LEVER  
37. 2G-7107 [1] KNOB-WING LIFT  
38. 137-4515 [2] BUSHING  
39. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8W-0456 [3] SHAFT  
44. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
47. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840671
 

115-0805: VALVE & LINKAGE GP

115-0805 VALVE & LINKAGE GP -BANK 6-RH-BANK 7-LH
S/N CCA1-UP
PART OF 184-7304 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00489774 SEBP3684
1150805 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-1008 Y [1] VALVE GP-BANK 6 (RH)  
2. 104-8651 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER  
5. 8D-5634 [2] LEVER  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4276 [13] ROD  
  6V-8186 [26] NUT-FULL (5/16-24-THD)  
  7H-3641 [26] END-ROD (5/16-24-THD)  
8. 8D-5633 [2] LEVER  
9. 101-2458 [3] LEVER  
10. 137-4515 [2] BUSHING  
11. 8D-5640 [15] BEARING  
12. 8D-5636 B [4] SHIM (0.254-MM THK)  
13. 8D-5637 B [4] SHIM (0.762-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [26] LOCKWASHER  
17. 8D-5641 [13] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
34. 104-7429 [2] PLATE  
35. 137-4516 [1] SHAFT  
36. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [2] LEVER  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [4] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840672
 

121-4083: VALVE & LINKAGE GP

121-4083 VALVE & LINKAGE GP -BANK 4-LH,RH
S/N CCA1-UP
PART OF 207-4453, 210-2044, 277-5453 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i00126055 SEBP3684
1214083 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
2. 130-3117 CY [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4276 [8] ROD  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
42. 8D-5633 [1] LEVER (SIDESHIFT)  
43. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840673
 

121-4084: VALVE & LINKAGE GP

121-4084 VALVE & LINKAGE GP -BANK 5-RH-BANK 7-LH
S/N CCA1-UP
AN ATTACHMENT
i00126056 SEBP3684
1214084 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [14] BEARING  
10. 8D-5641 [12] BEARING  
11. 8X-4277 [12] ROD AS  
    (EACH INCLUDES)
11A. 146-0705 [1] ROD  
11B. 7H-3641 [1] END-ROD (5/16-24-THD)  
11C. 8L-8598 [1] ROD END  
11D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [2] LEVER  
15. 101-2458 [3] LEVER  
16. 103-1597 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4517 [1] SHAFT  
22. 130-3120 CY [1] VALVE GP-BANK 7 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 2G-7107 [1] KNOB-WING LIFT  
35. 2G-7108 [1] KNOB-WING TILT  
36. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
43. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
44. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
45. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840674
 

121-4086: VALVE & LINKAGE GP

121-4086 VALVE & LINKAGE GP -BANK 5 LH-RH
S/N CCA1-UP
AN ATTACHMENT
i00126057 SEBP3684
1214086 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [12] BEARING  
10. 8D-5641 [10] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
12A. 146-0705 [1] ROD  
12B. 7H-3641 [1] END-ROD (5/16-24-THD)  
12C. 8L-8598 [1] ROD END  
12D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [2] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
35. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840675
 

121-4090: VALVE & LINKAGE GP

121-4090 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N CCA1-UP
PART OF 184-7308 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126058 SEBP3684
1214090 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
24. 130-3118 CY [1] VALVE GP-BANK 5 (LH)  
25. 2G-6740 [1] KNOB-RIPPER  
26. 2G-6747 [1] KNOB-BLADE TIP  
27. 2G-6748 [1] KNOB-BLADE LIFT  
28. 2G-6749 [1] KNOB-SIDESHIFT  
29. 2G-6751 [1] KNOB-CIRCLE DRIVE  
30. 2G-6752 [1] KNOB-ARTICULATION  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840676
 

121-4094: VALVE & LINKAGE GP

121-4094 VALVE & LINKAGE GP -BANK 5-RH-BANK 6-LH
S/N CCA1-UP
AN ATTACHMENT
i00126059 SEBP3684
1214094 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [11] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [13] BEARING  
11. 8D-5641 [11] BEARING  
12. 8L-8598 [11] ROD END  
13. 8W-0456 [2] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 103-1597 [1] LEVER  
19. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 104-7429 [2] PLATE  
21. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
22. 137-4515 [2] BUSHING  
23. 137-4516 [1] SHAFT  
24. 146-0705 [11] ROD  
25. 130-3121 CY [1] VALVE GP-BANK 6 (LH)  
26. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 2G-7107 [1] KNOB-WING LIFT  
37. 2G-7108 [1] KNOB-WING TILT  
38. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
42. 6V-8186 [11] NUT-FULL (5/16-24-THD)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
45. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
47. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
48. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840677
 

121-4095: VALVE & LINKAGE GP

121-4095 VALVE & LINKAGE GP -BANK 4-RH-BANK 5-LH
S/N CCA1-UP
AN ATTACHMENT
i00126060 SEBP3684
1214095 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
24. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
25. 2G-6747 [1] KNOB-BLADE TIP  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6749 [1] KNOB-SIDESHIFT  
28. 2G-6751 [1] KNOB-CIRCLE DRIVE  
29. 2G-6752 [1] KNOB-ARTICULATION  
30. 2G-6753 [1] KNOB-SCARIFIER  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840678
 

121-4096: VALVE & LINKAGE GP

121-4096 VALVE & LINKAGE GP -BANK 5-RH, BANK 7-LH
S/N CCA1-UP
PART OF 184-7306 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126061 SEBP3684
1214096 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [24] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [12] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [14] BEARING  
11. 8D-5641 [12] BEARING  
12. 8L-8598 [12] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [3] LEVER  
17. 103-1597 [1] LEVER  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4517 [1] SHAFT  
23. 146-0705 [12] ROD  
24. 130-3122 CY [1] VALVE GP-BANK 7 (LH)  
25. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT  
36. 2G-7107 [1] KNOB-WING LIFT  
37. 2G-7108 [1] KNOB-WING TILT  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
48. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840679
 

121-4097: VALVE & LINKAGE GP

121-4097 VALVE & LINKAGE GP -BANK 5-LH,RH
S/N CCA1-UP
PART OF 184-7307 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126062 SEBP3684
1214097 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [10] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [12] BEARING  
11. 8D-5641 [10] BEARING  
12. 8L-8598 [10] ROD END  
13. 8W-0456 [1] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 146-0705 [10] ROD  
24. 130-3118 CY [1] VALVE GP-BANK 5 (LH)  
25. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
36. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8186 [10] NUT-FULL (5/16-24-THD)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
47. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140H :

VALVE & LINKAGE GP
112-5499 VALVE & LINKAGE GP
VALVE & LINKAGE GP
107-3856 VALVE & LINKAGE GP
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SWASHPLATE GP
169-3290 SWASHPLATE GP
VALVE & LINKAGE GP
115-0805 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4083 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4084 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4086 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4090 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4094 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4095 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4096 VALVE & LINKAGE GP

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.