AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

167-8053 CONSOLE GP-OPERATOR S/N CCA1-UP PART OF 159-4615 GENERAL AR 140H MOTOR GRADER


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-STEERING
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMED
OPERATOR STATION
CONVERSION GP
DOOR GP

MOTOR GRADER 140H MOTOR GRADER CCA
 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3684 140H CCA   (2002)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
167-8053 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
 

#SEBP36840840
 

167-8053: CONSOLE GP-OPERATOR

167-8053 CONSOLE GP-OPERATOR
S/N CCA1-UP
PART OF 159-4615 GENERAL AR
i01673203 SEBP3684
1678053 CONSOLE GP-OPERATOR Parts scheme 1678053 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-8572 [8] WASHER-SPECIAL  
2. 2G-8573 [8] CAP  
3. 2K-5830 [2] BEARING AS-NEEDLE  
4. 3B-4607 [2] PIN-COTTER  
5. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
6. 3Y-2806 [1] SPRING  
7. 4B-4314 [1] RIVET  
8. 6G-2914 [1] LATCH  
9. 6G-8814 [2] BRACKET  
10. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
11. 7I-4890 [1] PLATE AS  
12. 8C-3442 [1] SPRING-COIL  
13. 8D-5641 B [14] BEARING  
14. 8D-7960 [2] PLATE  
15. 8L-7905 [2] RIVET-POP  
16. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
17. 8X-1904 [1] SPACER (20X35X26-MM THK)  
18. 8X-1908 [1] PANEL  
19. 8X-1911 [1] PANEL  
20. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
21. 8X-1914 [1] SHAFT  
22. 8X-1921 [1] HOOD  
23. 8X-2160 [1] LEVER (STEERING WHEEL TILT CONTROL)  
24. 8X-2161 [1] LEVER (STEERING COLUMN TILT)  
25. 8X-2893 M [10] NUT (M4X0.7-THD)  
26. 8X-3789 [1] PANEL  
27. 8X-3951 [1] PANEL  
28. 8X-3965 [1] RATCHET  
29. 8X-5123 [1] RETAINER  
30. 031-2666 [1] ROD  
31. 034-1994 [1] PIN  
32. 110-6241 [1] BRACKET  
33. 177-7448 [1] CHANNEL AS  
34. 183-1425 [1] BASE  
35. 204-6488 [1] CHANNEL AS  
36. 206-9651 [2] PLATE  
37. 230-9138 [8] PLUG  
38. 236-0737 [1] CYLINDER  
39. 2A-7184 [2] PLATE  
40. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
41. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
42. 174-8131 M [16] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
43. 2K-7979 [13] BUSHING  
44. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
45. 3F-7514 [4] PIN  
46. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
47. 5C-8312 M [6] NUT (M4X0.7-THD)  
48. 5M-8500 [1] KNOB (STEERING WHEEL TILT CONTROL)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
51. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
52. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
53. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
54. 8T-1174 [4] SEAL-LIP TYPE  
55. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
56. 8T-4133 M [1] NUT (M10X1.5-THD)  
57. 8X-1907 [1] SHAFT  
58. 9M-5590 [1] BALL  
59. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
60. 5P-5637 D SEAL (1.2-M)  
61. 5P-5639 D SEAL (0.4-M)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36840841
 

167-9002: CONSOLE GP-OPERATOR

167-9002 CONSOLE GP-OPERATOR
S/N CCA1-1637
PART OF 159-4615 GENERAL AR
i01673395 SEBP3684
1679002 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0706 [1] KNOB (TRANSMISSION CONTROL)  
2. 8X-4879 [2] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
3. 8X-8096 [1] FILM-COVER (COVER BLACK)  
4. 143-9290 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
5. 169-2621 [1] GATE AS  
6. 169-3380 [1] PLATE AS  
7. 180-3531 [1] CONTROL GP-TRANSMISSION  
8. 171-2122 [1] COVER  
9. 172-7105 [1] FILM-IDENTIFICATION (TRANSMISSION, PARKING BRAKE)(TRANSMISSION INDICATOR PANEL)  
10. 172-7106 [1] FILM-IDENTIFICATION (SPEED SELECT)(SPEED SELECT)  
11. 185-2274 [1] FILM-INFORMATION (ENGINE, HIGH IDLE, HOLD)  
12. 185-2287 [1] FILM-INFORMATION (ENGINE, LOW IDLE, HOLD)  
13. 187-0491 [1] COVER  
14. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
15. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
16. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
17. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP36840842
 

167-9002: CONSOLE GP-OPERATOR

167-9002 CONSOLE GP-OPERATOR
S/N CCA1638-UP
PART OF 159-4615 GENERAL AR
i02360739 SEBP3684
1679002 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0706 [1] KNOB (TRANSMISSION DIRECTION, SPEED)  
2. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
3. 8X-8096 [1] FILM-COVER (OPERATOR CONSOLE)  
4. 143-9290 [1] PLATE AS  
5. 169-2621 [1] GATE AS  
6. 169-3380 [1] PLATE AS  
7. 253-4019 [1] CONTROL-TRANSMISSION  
8. 171-2122 [1] COVER  
9. 172-7105 [1] FILM-IDENTIFICATION (TRANSMISSION, PARKING BRAKE)(TRANSMISSION, PARKING BRAKE)  
10. 172-7106 [1] FILM-IDENTIFICATION (SPEED SELECT)(SPEED CONTROL)  
11. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
12. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
13. 187-0491 [1] COVER  
14. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
15. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
 

#SEBP36840843
 

159-5933: CONTROL GP-CLUTCH

159-5933 CONTROL GP-CLUTCH
S/N CCA1-UP
PART OF 159-4615 GENERAL AR
i01673206 SEBP3684
1595933 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-2578 [1] NUT (3/8-16-THD)  
2. 1F-4622 [2] BEARING AS-NEEDLE  
3. 5P-9209 [2] BEARING AS-NEEDLE  
4. 7V-0446 [2] CLIP  
5. 9J-8783 [1] SHIM (0.508-MM THK)  
6. 116-5710 [1] GROMMET  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 169-0922 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 214-4863 CY [1] SENSOR GP-POSITION (ROTARY)(CLUTCH)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 130-5300 [1] CLIP  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 3H-8538 [1] PIN  
26. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
27. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
28. 4J-8922 [1] ROD END (3/8-24-THD)  
29. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
30. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
31. 6V-0894 C [1] SEAL-O-RING  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
40. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-5390 [1] BOLT (3/8-16X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840844
 

152-7903: CONTROL GP-HYDRAULIC LOCKOUT

152-7903 CONTROL GP-HYDRAULIC LOCKOUT
S/N CCA1-UP
PART OF 207-4453, 210-2044, 277-5453 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i01069961 SEBP3684
1527903 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-5014 [4] KNOB  
2. 152-5430 [4] BLOCK  
3. 152-5431 B [12] COLLAR  
4. 152-5436 [2] PLATE AS  
    (EACH INCLUDES)
  3W-6485 [2] SPRING  
5. 095-1260 BM [12] SETSCREW-SOCKET (M6X1X6-MM)  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36840845
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N CCA1-UP
PART OF 159-4615 GENERAL AR
i01966115 SEBP3684
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3769 CJ [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 118-9573 M [4] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (INCLUDES SEALS & INSTALLATION TOOL)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP36840846
 

160-6567: CONTROL GP-UNPRGMED MONITOR

160-6567 CONTROL GP-UNPRGMED MONITOR
S/N CCA1-UP
PART OF 159-5812, 178-3030, 196-4909 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
i02140959 SEBP3684
1606567 CONTROL GP-UNPRGMED MONITOR Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP36840847
 

183-3018: CONVERSION AR-NON-ROPS

183-3018 CONVERSION AR-NON-ROPS -OPEN
S/N CCA1-UP
AN ATTACHMENT
i01848495 SEBP3684
1833018 CONVERSION AR-NON-ROPS Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP (LITERATURE COMPARTMENT)  
  5P-8500 [1] KEY (LITERATURE COMPARTMENT)  
2. 8T-1191 [1] PLATE-WARNING (HAZARD, READ OMM)  
3. 8Y-4951 Y [1] SEAT GP-SUSPENSION (VINYL)  
4. 166-7065 Y [1] GUARD GP-PLATFORM  
5. 178-3030 Y [1] PANEL GP-INSTRUMENT (HIGH PROFILE)  
6. 9R-2620 [1] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36840848
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB
S/N CCA1-UP
Type 1
FIELD REPLACEMENT ORDER @@@@@553-1114@@@@@
i06093095 SEBP3684
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
3. 6D-6581 [14] RIVET-POP  
4. 6V-2773 [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
6. 8X-4066 [1] HINGE  
8. 8X-4262 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 282-8470 [1] DOOR AS-ACCESS (RH)  
  6V-9632 M [10] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 282-9436 [1] SPACER  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 D SEAL (1.5-M)  
45. 5P-5768 D SEAL (2.4-M)  
45A. 5P-5768 D SEAL (2.8-M)  
46. 122-2228 E SEAL (172-CM)  
47. 178-8894 E SEAL (340-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS  
50. 308-7593 [1] GLASS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP36840849
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB
S/N CCA1-UP
Type 2
FIELD REPLACEMENT ORDER @@@@@553-1114@@@@@
i06093090 SEBP3684
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
4. 6V-2773 C [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
8. 487-5655 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 J [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 566-7104 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 487-6629 [1] DOOR AS-CAB  
  6D-6581 [14] RIVET-POP  
  8X-4066 [1] HINGE  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
  3V-4694 [2] PLUG-BUTTON  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 C [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 CD SEAL (3-M)  
45. 5P-5768 CD SEAL (2.5-M)  
45A. 5P-5768 CD SEAL (2.8-M)  
46. 122-2228 E SEAL (148-CM)  
47. 178-8894 E SEAL (305-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS (LOWER)  
50. 308-7593 [1] GLASS (UPPER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 140H :

CONDENSER & MTG GP-REFRIGERANT
197-7659 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
394-9671 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
197-4568 COMPRESSOR & MTG GP-REFRIG
223-3937 CAB GP
225-3174 CAB AR
ARMREST GP
202-7668 ARMREST GP
ARMREST GP
202-7666 ARMREST GP
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
159-5933 CONTROL GP-CLUTCH
CONTROL GP-HYDRAULIC LOCKOUT
152-7903 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
CONTROL GP-UNPRGMED MONITOR
160-6567 CONTROL GP-UNPRGMED MONITOR
CONVERSION AR-NON-ROPS
183-3018 CONVERSION AR-NON-ROPS
DOOR GP-CAB
266-7031 DOOR GP-CAB

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.