AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

140H Motor Grader 12600001-UP (MACHINE) POWERED BY 3176C Engine POWER TRAIN Caterpillar SIS



MOTOR GRADER 140H MOTOR GRADER 126
 140H Motor Grader 12600001-UP (MACHINE) POWERED BY 3176C Engine SEBP3685 140H 126   (2003)

Parts group 140H:

  For full view, you need register
POWER TRAIN
AUTOSHIFT AR
161-0764 AUTOSHIFT AR
161-0764 AUTOSHIFT AR
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
BRAKE GP
BRAKE GP-PARKING
9W-5132 BRAKE GP-PARKING
9W-5132 BRAKE GP-PARKING
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
CHAIN GP
CHAIN GP-DRIVE
6G-1755 CHAIN GP-DRIVE
6G-1755 CHAIN GP-DRIVE
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
159-5933 CONTROL GP-CLUTCH
159-5933 CONTROL GP-CLUTCH
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-DIFFERENTIAL LOCK
160-7756 CONTROL GP-DIFFERENTIAL LOCK
160-7756 CONTROL GP-DIFFERENTIAL LOCK
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
179-6064 CONTROL GP-TRANSMISSION HYD
179-6064 CONTROL GP-TRANSMISSION HYD
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
COUPLING GP
COUPLING GP-TORSIONAL
8E-3366 COUPLING GP-TORSIONAL
8E-3366 COUPLING GP-TORSIONAL
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
8W-5430 DIFFERENTIAL & BEVEL GEAR GP
8W-5430 DIFFERENTIAL & BEVEL GEAR GP
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
DIFFERENTIAL GP
154-2688 DIFFERENTIAL GP
154-2688 DIFFERENTIAL GP
S/N 1261-UP
PART OF 8W-5430 DIFFERENTIAL & BEVEL GEAR GP
FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
159-6173 FILLER GP-POWER TRAIN OIL
159-6173 FILLER GP-POWER TRAIN OIL
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
FILTER GP
FILTER & MTG GP-TRANSMISSION
169-3651 FILTER & MTG GP-TRANSMISSION
169-3651 FILTER & MTG GP-TRANSMISSION -TRANSMISSION
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
FILTER GP-OIL
207-3819 FILTER GP-OIL
207-3819 FILTER GP-OIL -TRANSMISSION
S/N 1261-UP
PART OF 169-3651 FILTER & MTG GP-TRANSMISSION
KIT
288-2547 KIT-TRANSMISSION GASKET
288-2547 KIT-TRANSMISSION GASKET
S/N 1261-UP
KIT CONTAINS SEALS (EXCEPT METAL SEAL RINGS), GASKETS AND BENDABLE LOCKS TO RESEAL THE COMPLETE POWER SHIFT. TRANSMISSION ARRANGEMENT. IT ALSO CONTAINS SEALS AND GASKETS TO ATTACH VALVES, FILL TUBE AND DIPSTICK THAT ARE REMOVED. WITH THE TRANSMISSION. IT HAS TRANSMISSION MOUNTING SEALS AND GASKETS
FIELD INSTALLATION
LINES GP-POWER TRAIN OIL
LINES GP-TRANSMISSION OIL
159-6174 LINES GP-TRANSMISSION OIL
159-6174 LINES GP-TRANSMISSION OIL
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
PUMP GP
PUMP GP-GEAR
6Y-8764 PUMP GP-GEAR
6Y-8764 PUMP GP-GEAR -TRANSMISSION-TRANSMISSION
S/N EDB1-UP; BJN1-99999
PART OF 6Y-8765 PUMP GP-GEAR
PUMP GP-GEAR
6Y-8765 PUMP GP-GEAR
6Y-8765 PUMP GP-GEAR -TRANSMISSION-TRANSMISSION
S/N EDB1-UP; BJN1-99999
2-SECTION
PART OF 160-2196 TRANSMISSION AR
SCREEN GP
SCREEN GP-MAGNETIC
9W-5134 SCREEN GP-MAGNETIC
9W-5134 SCREEN GP-MAGNETIC
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
SHAFT GP
SHAFT GP-DRIVE
8W-5394 SHAFT GP-DRIVE
8W-5394 SHAFT GP-DRIVE
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
UNIVERSAL JOINT GP
8X-5005 UNIVERSAL JOINT GP
8X-5005 UNIVERSAL JOINT GP
S/N 1261-UP
PART OF 8W-5394 SHAFT GP-DRIVE
TANDEM & COVER GP
TANDEM & COVER GP
190-1688 TANDEM & COVER GP
190-1688 TANDEM & COVER GP
S/N 1261-175
PART OF 2C-9840 GENERAL AR
TANDEM & COVER GP
190-1688 TANDEM & COVER GP
190-1688 TANDEM & COVER GP
S/N 126176-UP
PART OF 2C-9840 GENERAL AR
TRANSMISSION GP
MOUNTING GP-ENGINE & XMSN
159-5436 MOUNTING GP-ENGINE & XMSN
159-5436 MOUNTING GP-ENGINE & XMSN
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
S/N EDB1-3223; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
180-9146 CASE & PARTS GP-TRANSMISSION
S/N EDB3224-UP
PART OF 160-2196 TRANSMISSION AR
CLUTCH GP-TRANSMISSION
159-9228 CLUTCH GP-TRANSMISSION
159-9228 CLUTCH GP-TRANSMISSION -FORWARD
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
CLUTCH GP-TRANSMISSION
159-9229 CLUTCH GP-TRANSMISSION
159-9229 CLUTCH GP-TRANSMISSION -REVERSE & 2ND
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
CLUTCH GP-TRANSMISSION
6Y-2303 CLUTCH GP-TRANSMISSION
6Y-2303 CLUTCH GP-TRANSMISSION -1ST & 3RD
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
CLUTCH GP-TRANSMISSION
8E-9316 CLUTCH GP-TRANSMISSION
8E-9316 CLUTCH GP-TRANSMISSION -HI & LO
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
288-2547 KIT-TRANSMISSION GASKET
288-2547 KIT-TRANSMISSION GASKET
S/N 1261-UP
KIT CONTAINS SEALS (EXCEPT METAL SEAL RINGS), GASKETS AND BENDABLE LOCKS TO RESEAL THE COMPLETE POWER SHIFT. TRANSMISSION ARRANGEMENT. IT ALSO CONTAINS SEALS AND GASKETS TO ATTACH VALVES, FILL TUBE AND DIPSTICK THAT ARE REMOVED. WITH THE TRANSMISSION. IT HAS TRANSMISSION MOUNTING SEALS AND GASKETS
FIELD INSTALLATION
SHAFT GP-INPUT
176-6465 SHAFT GP-INPUT
176-6465 SHAFT GP-INPUT
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
TRANSMISSION AR
160-2196 TRANSMISSION AR
160-2196 TRANSMISSION AR
S/N EDB1-UP; BJN1-99999
PART OF 2C-9840 GENERAL AR
3Q-9297 GUARD AR-TRANSMISSION
3Q-9297 GUARD AR-TRANSMISSION
S/N 1261-UP
AN ATTACHMENT
VALVE & MTG GP
VALVE & MTG GP-DIFF LOCK
174-3705 VALVE & MTG GP-DIFF LOCK
174-3705 VALVE & MTG GP-DIFF LOCK
S/N 1261-UP
PART OF 160-7756 CONTROL GP-DIFFERENTIAL LOCK
VALVE GP-PILOT
VALVE GP-PILOT
244-4120 VALVE GP-PILOT
244-4120 VALVE GP-PILOT
S/N 126176-UP
PART OF 235-4257 PUMP GP-PISTON
VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
184-1130 VALVE GP-SELECTOR & PRESS CONT
184-1130 VALVE GP-SELECTOR & PRESS CONT -XMSN DIRECTION/RANGE
S/N EDB1-UP; BJN1-99999
PART OF 179-6063 VALVE GP-TRANSMISSION CONTROL
VALVE GP-SELECTOR & PRESS CONT
184-1132 VALVE GP-SELECTOR & PRESS CONT
184-1132 VALVE GP-SELECTOR & PRESS CONT -XMSN SPEED & RANGE
S/N EDB1-UP; BJN1-99999
PART OF 179-6063 VALVE GP-TRANSMISSION CONTROL
VALVE GP-SOLENOID
VALVE GP-SOLENOID
154-3064 VALVE GP-SOLENOID
154-3064 VALVE GP-SOLENOID
S/N 1261-UP
24V DC
PART OF 174-3705 VALVE & MTG GP-DIFF LOCK
FIELD REPLACEMENT FOR 144-6294 VALVE GP-SOLENOID,
VALVE GP-SOLENOID
175-3893 VALVE GP-SOLENOID
175-3893 VALVE GP-SOLENOID
S/N EDB1-UP; BJN1-99999
24 VOLT
PART OF 184-1130 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SOLENOID
186-1526 VALVE GP-SOLENOID
186-1526 VALVE GP-SOLENOID
S/N EDB1-UP; BJN1-99999
24 VOLT
PART OF 184-1130, 184-1132 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-TRANSMISSION CONTROL
CONTROL GP-TRANSMISSION HYD
179-6064 CONTROL GP-TRANSMISSION HYD
179-6064 CONTROL GP-TRANSMISSION HYD
S/N EDB1-UP; BJN1-99999
PART OF 160-2196 TRANSMISSION AR
VALVE GP-TRANSMISSION CONTROL
179-6063 VALVE GP-TRANSMISSION CONTROL
179-6063 VALVE GP-TRANSMISSION CONTROL
S/N EDB1-UP; BJN1-99999
PART OF 179-6064 CONTROL GP-TRANSMISSION HYD
WHEEL GP
142-6203 MOUNTING GP-WHEEL
142-6203 MOUNTING GP-WHEEL
S/N 1261-UP
PART OF 2C-9840 GENERAL AR
142-6464 WHEEL & TIRE AR
142-6464 WHEEL & TIRE AR
S/N 1261-UP
14.0 R24 XGLA2
AN ATTACHMENT
151-0334 WHEEL & TIRE AR
151-0334 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
151-0362 WHEEL & TIRE AR
151-0362 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
151-0380 WHEEL & TIRE AR
151-0380 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
151-0381 WHEEL & TIRE AR
151-0381 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
174-2304 WHEEL & TIRE AR
174-2304 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
204-8786 WHEEL & TIRE AR
204-8786 WHEEL & TIRE AR
S/N 1261-UP
17.5 R25 * VUT
AN ATTACHMENT
216-7444 WHEEL & TIRE AR
216-7444 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
256-6768 WHEEL & TIRE AR
256-6768 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
260-8735 WHEEL & TIRE AR
260-8735 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
264-5121 WHEEL & TIRE AR
264-5121 WHEEL & TIRE AR
S/N 1261-UP
AN ATTACHMENT
142-6316 WHEEL & TIRE GP
142-6316 WHEEL & TIRE GP
S/N 1261-UP
PART OF 142-6464 WHEEL & TIRE AR
AN ATTACHMENT
142-6332 WHEEL & TIRE GP
142-6332 WHEEL & TIRE GP
S/N 1261-UP
PART OF 151-0362 WHEEL & TIRE AR
AN ATTACHMENT
142-6348 WHEEL & TIRE GP
142-6348 WHEEL & TIRE GP
S/N 1261-UP
PART OF 151-0334 WHEEL & TIRE AR
AN ATTACHMENT
142-6364 WHEEL & TIRE GP
142-6364 WHEEL & TIRE GP
S/N 1261-UP
PART OF 151-0380 WHEEL & TIRE AR
AN ATTACHMENT
142-6367 WHEEL & TIRE GP
142-6367 WHEEL & TIRE GP
S/N 1261-UP
PART OF 151-0381 WHEEL & TIRE AR
AN ATTACHMENT
173-7813 WHEEL & TIRE GP
173-7813 WHEEL & TIRE GP
S/N 1261-UP
PART OF 174-2304 WHEEL & TIRE AR
AN ATTACHMENT
204-8785 WHEEL & TIRE GP
204-8785 WHEEL & TIRE GP
S/N 1261-UP
17.5 R25 * VUT
PART OF 204-8786 WHEEL & TIRE AR
AN ATTACHMENT
216-7443 WHEEL & TIRE GP
216-7443 WHEEL & TIRE GP
S/N 1261-UP
PART OF 216-7444 WHEEL & TIRE AR
AN ATTACHMENT
256-6767 WHEEL & TIRE GP
256-6767 WHEEL & TIRE GP
S/N 1261-UP
PART OF 256-6768 WHEEL & TIRE AR
AN ATTACHMENT
260-8734 WHEEL & TIRE GP
260-8734 WHEEL & TIRE GP
S/N 1261-UP
(10X25)
PART OF 260-8735 WHEEL & TIRE AR
AN ATTACHMENT
264-5120 WHEEL & TIRE GP
264-5120 WHEEL & TIRE GP
S/N 1261-UP
PART OF 264-5121 WHEEL & TIRE AR
AN ATTACHMENT
216-7446 WHEEL AR
216-7446 WHEEL AR
S/N 1261-UP
AN ATTACHMENT
142-6226 WHEEL GP
142-6226 WHEEL GP
S/N 1261-UP
PART OF 142-6316, 142-6332, 216-7443 WHEEL & TIRE GP
AN ATTACHMENT
142-6229 WHEEL GP
142-6229 WHEEL GP
S/N 1261-UP
(14 X 25)
PART OF 142-6364, 142-6367, 204-8785, 260-8734 WHEEL & TIRE GP, 216-7445 WHEEL GP
AN ATTACHMENT
142-6230 WHEEL GP
142-6230 WHEEL GP
S/N 1261-UP
(12 X 25)
PART OF 142-6348, 256-6767, 264-5120 WHEEL & TIRE GP
AN ATTACHMENT
216-7445 WHEEL GP
216-7445 WHEEL GP
S/N 1261-UP
PART OF 216-7446 WHEEL AR
AN ATTACHMENT
CARRIER GP-WHEEL
3Q-9205 CARRIER GP-WHEEL
3Q-9205 CARRIER GP-WHEEL -FRONT MOUNTED
S/N 1261-UP
AN ATTACHMENT
COOLER GP
COOLER GP-ENGINE & XMSN OIL
163-9322 COOLER GP-ENGINE & XMSN OIL
163-9322 COOLER GP-ENGINE & XMSN OIL
S/N 3PD1-12556
PART OF 160-5101 ENGINE AR
COOLER GP-ENGINE & XMSN OIL
262-7138 COOLER GP-ENGINE & XMSN OIL
262-7138 COOLER GP-ENGINE & XMSN OIL
S/N 3PD12557-UP
PART OF 160-5101, 285-6403 ENGINE AR
DRIVE GP-FINAL
DRIVE GP-FINAL
8W-4368 DRIVE GP-FINAL
8W-4368 DRIVE GP-FINAL
S/N 1261-UP
PART OF 2C-9840 GENERAL AR

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Operation and Maintenance Manual
Axle Oscillation Bearings - Lubricate
140H and 160H Motor Graders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Technical Information Bulletin
Early Hour Filter Change
Early Hour Filter Change
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Operation and Maintenance Manual
Braking System - Test
140H and 160H Motor Graders
Brakes, Indicators and Gauges - Test
140H and 160H Motor Graders
Parking Brake - Drain
140H and 160H Motor Graders
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Parking Brake
12H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Air Control Valve (Parking Brake)
12H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Systems Operation
Air Control Valve (Parking Brake)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Parking Brake
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Service Magazine
A New Piston is Now Used in Certain Motor Graders {3077, 4267}
2008/12/29
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Technical Information Bulletin
MOTOR GRADER TANDEM DRIVE CHAIN PINS MAY NOT HAVE RECEIVED THE PROPER HEAT TREAT
MOTOR GRADER TANDEM DRIVE CHAIN PINS MAY NOT HAVE RECEIVED THE PROPER HEAT TREAT
MOTOR GRADER TANDEM DRIVE CHAIN BUSHINGS MAY NOT HAVE RECEIVED THE PROPER HEAT TREAT
MOTOR GRADER TANDEM DRIVE CHAIN BUSHINGS MAY NOT HAVE RECEIVED THE PROPER HEAT TREAT
Specifications
Drive Chain
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, AND 143H MOTOR GRADERS
Testing and Adjusting
Drive Chain - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Drive Chain - Remove
12H, 140H and 160H Motor Graders Power Train
Drive Chain - Install
12H, 140H and 160H Motor Graders Power Train
Service Magazine
Checking Chain Wear in Motor Grader Tandem Drives {3261, 4063}
2004/06/21
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
Specifications
Clutch Control (Modulation)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Testing and Adjusting
Clutch Control - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Clutch Pedal - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Systems Operation
Differential and Bevel Gear
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
Changes to the Differential Lock Control Group Increase the Service Life of the Differential Lock Hose On Certain H Series Motor Graders {3264, 5057}
2011/06/30
Specifications
Transmission Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Transmission Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Systems Operation
Transmission Control Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Testing and Adjusting
Transmission Lubrication Oil Pressure - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
The Transmission Control Group Has Been Improved {3073, 3167}
2005/12/26
An Improved Coupling Assembly is Used {3252, 3279}
2006/12/25
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Operation and Maintenance Manual
Transmission and Differential Oil - Change
140H and 160H Motor Graders
Transmission and Differential Oil Filter and Screens - Replace/Clean
140H and 160H Motor Graders
Transmission and Differential Oil Level - Check
140H and 160H Motor Graders
Transmission and Differential Oil Sample - Obtain
140H and 160H Motor Graders
Technical Information Bulletin
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
Procedure to Provide Pinion Bearings with Sufficient Oil {3256, 3258}
Specifications
Differential and Bevel Gear
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Differential
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Systems Operation
Differential and Bevel Gear
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential and Bevel Gear - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Differential and Bevel Gear - Remove
12H, 140H and 160H Motor Graders Power Train
Differential and Bevel Gear - Install
12H, 140H and 160H Motor Graders Power Train
Differential and Bevel Gear - Disassemble
12H, 140H and 160H Motor Graders Power Train
Differential and Bevel Gear - Assemble
12H, 140H and 160H Motor Graders Power Train
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Operation and Maintenance Manual
Tandem Drive Oil Level - Check
140H and 160H Motor Graders
Tandem Drive Oil Sample - Obtain
140H and 160H Motor Graders
Tandem Drive Oil - Change
140H and 160H Motor Graders
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Disassembly and Assembly
Drive Sprocket - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Operation and Maintenance Manual
Transmission and Differential Oil - Change
140H and 160H Motor Graders
Transmission and Differential Oil Level - Check
140H and 160H Motor Graders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
140H and 160H Motor Graders
Transmission and Differential Oil Filter and Screens - Replace/Clean
140H and 160H Motor Graders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Bypass Switch (Power Train Oil Filter)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Oil Filter (Power Train)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
Service Letter-Asia
Systems Operation
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 215-1868 TRANSMISSION FILTER DRAIN VALVE ON CERTAIN 12H, 120H, 135H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
Disassembly and Assembly
Transmission Oil Filter Base - Remove
12H, 140H and 160H Motor Graders Power Train
Transmission Oil Filter Base - Install
12H, 140H and 160H Motor Graders Power Train
Transmission Oil Filter Base - Disassemble
12H, 140H and 160H Motor Graders Power Train
Transmission Oil Filter Base - Assemble
12H, 140H and 160H Motor Graders Power Train
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
Improved Canister for the Filter Housing {3004, 3067, 5068, 5091, 5092, 5093}
2007/12/31
New Advanced Efficiency Filters Are Now Available {1408, 1435, 3004, 3067, 5068}
2010/03/05
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Motor Graders {3004, 3067, 5068}
2010/12/08
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Updated Transmission Oil Lines Include Hardware in order to Secure the Oil Lines {3154}
2004/04/05
The Addition of Hardware Improves the Service Life of the Transmission Lines {3154, 7553}
2004/05/31
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Gear Pump (Transmission Charging and Scavenge)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Testing and Adjusting
Pump Efficiency (Gear Pumps) - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Charging Pump Pressure - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Gear Pump (Transmission Charging and Scavenge) - Disassemble
12H, 140H and 160H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Assemble
12H, 140H and 160H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Install
12H, 140H and 160H Motor Graders Power Train
Gear Pump (Transmission Charging and Scavenge) - Remove
12H, 140H and 160H Motor Graders Power Train
Operation and Maintenance Manual
Transmission and Differential Oil Filter and Screens - Replace/Clean
140H and 160H Motor Graders
Specifications
Magnetic Screen (Transmission)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Technical Information Bulletin
Drive Shaft U-Joint Bolts May Not Have the Proper Torque on Certain Motor Graders
Drive Shaft U-Joint Bolts May Not Have the Proper Torque on Certain Motor Graders
Specifications
Drive Shaft
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Drive Shaft Shield (Pump Drive Shaft)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Operation and Maintenance Manual
Tandem Drive Oil Level - Check
140H and 160H Motor Graders
Tandem Drive Oil Sample - Obtain
140H and 160H Motor Graders
Tandem Drive Oil - Change
140H and 160H Motor Graders
Tandem Breather - Clean/Replace
140H and 160H Motor Graders
Specifications
Tandem and Cover
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Systems Operation
Final Drive and Tandem Drive
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Contamination Control Guidelines
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Disassembly and Assembly
Tandem and Cover - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Service Magazine
Correction to Disassembly and Assembly , "Tandem and Cover - Remove and Install" {4064}
2004/02/23
The Breather has been Relocated on the Tandem and Cover Group {4062, 4064}
2005/12/12
Welds Can Be Added In Order To Strengthen The Tandem Drive Housing Assemblies on Certain H Series Motor Graders {4062, 4064}
2012/02/08
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Systems Operation
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Graphic Color Codes
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Operation and Maintenance Manual
Transmission and Differential Oil - Change
140H and 160H Motor Graders
Transmission and Differential Oil Level - Check
140H and 160H Motor Graders
Transmission and Differential Oil Sample - Obtain
140H and 160H Motor Graders
Specifications
Magnetic Screen (Transmission)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Speed Sensor (Transmission Output)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Transmission
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Speed Sensor (Transmission Input)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Transmission Case
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Tool Operating Manual
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Power Train Hydraulic System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Graphic Color Codes
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Clutch Running Clearance - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission - Disassemble
12H, 140H and 160H Motor Graders Power Train
Transmission - Assemble
12H, 140H and 160H Motor Graders Power Train
Transmission - Remove
12H, 140H and 160H Motor Graders Power Train
Transmission - Install
12H, 140H and 160H Motor Graders Power Train
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
A New Process for Checking Seal Ring Carrier to Clutch Shaft Clearance {3063, 3155, 3170}
2007/11/19
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
Specifications
Solenoid Valve (Differential Lock)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Systems Operation
Differential and Bevel Gear
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Testing and Adjusting
Differential Lock Pressure - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Differential Lock Valve - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
The Color Codes on the Springs in the Selector and Pressure Control Valves Have Changed {3073, 3074, 3083, 3124}
2009/04/20
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Solenoid Valve (Transmission Clutch)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Selector and Pressure Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Selector and Pressure Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Selector and Pressure Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Testing and Adjusting
Engagement Pressure for the Transmission Clutch - Calibrate
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Fill Time for the Transmission Clutch - Calibrate
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Lubrication Oil Pressure - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Initial Pressures - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Transmission Pressures - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Troubleshooting
MID 081 - CID 1401 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1401 - FMI 13
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1402 - FMI 13
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1403 - FMI 13
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
The Color Codes on the Springs in the Selector and Pressure Control Valves Have Changed {3073, 3074, 3083, 3124}
2009/04/20
Specifications
Solenoid Valve (Transmission Clutch)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Solenoid Valve (Differential Lock)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Selector and Pressure Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Selector and Pressure Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Selector and Pressure Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Troubleshooting
MID 081 - CID 1404 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1404 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1404 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1405 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1406 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1407 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 1408 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
MID 081 - CID 0688 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Service Magazine
A New Coil Assembly is Now Used {5479}
2011/05/04
Specifications
Transmission Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Solenoid Valve (Transmission Clutch)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Transmission Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Systems Operation
Transmission Control Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Transmission Control Valve - Disassemble
12H, 140H and 160H Motor Graders Power Train
Transmission Control Valve - Assemble
12H, 140H and 160H Motor Graders Power Train
Transmission Control Valve - Remove
12H, 140H and 160H Motor Graders Power Train
Transmission Control Valve - Install
12H, 140H and 160H Motor Graders Power Train
Service Magazine
The Transmission Control Group Has Been Improved {3073, 3167}
2005/12/26
The Color Codes on the Springs in the Selector and Pressure Control Valves Have Changed {3073, 3074, 3083, 3124}
2009/04/20
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Operation and Maintenance Manual
Tire Inflation Pressure Adjustment
140H and 160H Motor Graders
Tire Inflation with Nitrogen
140H and 160H Motor Graders
Tire Inflation - Check
140H and 160H Motor Graders
Tire Shipping Pressure
140H and 160H Motor Graders
Wheel Bearing Oil (Front) - Change
140H and 160H Motor Graders
Wheel Bearing Oil Level (Front) - Check
140H and 160H Motor Graders
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Reuse Guidelines for Wheels that are used on certain Motor Graders{4201}
Reuse Guidelines for Wheels that are used on certain Motor Graders{4201}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Wheel Group
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Disassembly and Assembly
Wheel and Tire (Rear) - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Wheel and Tire (Front) - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Service Magazine
Recommended Limits to the Difference in Tire Diameters {4203}
2003/07/28
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Air Compressor - Disassemble
140H and 160H Motor Graders Engine Supplement
Air Compressor - Assemble
140H and 160H Motor Graders Engine Supplement
Specifications
Transmission Oil Cooler
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Disassembly and Assembly
Transmission Oil Cooler - Remove
12H, 140H and 160H Motor Graders Power Train
Transmission Oil Cooler - Install
12H, 140H and 160H Motor Graders Power Train
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Final Drive Preload - Check
140H and 160H Motor Graders
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Technical Information Bulletin
CERTAIN MOTOR GRADERS MAY NOT HAVE THE PROPER TORQUE APPLIED TO CERTAIN NUTS AND BOLTS WITHIN THE FINAL DRIVE GROUP
CERTAIN MOTOR GRADERS MAY NOT HAVE THE PROPER TORQUE APPLIED TO CERTAIN NUTS AND BOLTS WITHIN THE FINAL DRIVE GROUP
Specifications
Final Drive
12H, 140H, 143H, 160H and 163H Motor Graders Power Train
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive and Tandem Drive
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Final Drive Bearings - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Disassembly and Assembly
Final Drive - Disassemble
12H, 140H and 160H Motor Graders Power Train
Final Drive - Assemble
12H, 140H and 160H Motor Graders Power Train
Drive Sprocket - Remove and Install
12H, 140H and 160H Motor Graders Power Train
Final Drive - Remove
12H, 140H and 160H Motor Graders Power Train
Final Drive - Install
12H, 140H and 160H Motor Graders Power Train
Service Magazine
A New Retainer for the Final Drive With Improved Service Life Is Now Used {4050}
2003/09/01
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
New Thrust Washers Update the Final Drive Groups on Certain Motor Graders {4050}
2009/08/24
New Seals For the Final Drive Housing are Now Used On Certain Motor Graders {4050}
2010/02/17
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.