161-1751 ENGINE AR S/N 3PD4428-UP PART OF 159-7195 GENERAL AR 160H MOTOR GRADER

Part No	Qty	Parts name
234-2413 Y	[1]	AIR COMPRESSOR GP
234-2412 Y	[1]	BELT TENSIONER GP
171-3062 Y	[1]	CAMSHAFT GP
232-5990 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
163-9322 Y	[1]	COOLER GP-ENGINE & XMSN OIL
		S/N 3PD4428-12571
262-7138 Y	[1]	COOLER GP-ENGINE & XMSN OIL
		S/N 3PD12572-UP
174-1762 Y	[1]	COVER GP-CYLINDER BLOCK
132-3210 Y	[1]	CRANKSHAFT GP
180-6662 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
174-1591 Y	[1]	DRIVE GP-ACCESSORY
174-1579 Y	[1]	FILLER GP-ENGINE OIL
164-2490 Y	[1]	FILTER GP-ENGINE OIL
116-5436 Y	[1]	FILTER GP-FUEL
174-1581 Y	[1]	FLYWHEEL GP
174-1576 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
174-1584 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
233-6663 Y	[1]	LINES GP-FUEL
179-9565 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
215-2063 Y	[1]	HOUSING & REGULATOR GP-MTG
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
		S/N 3PD4428-12571
255-5307 Y	[1]	LINES GP-WATER (INLET ELBOW)
		S/N 3PD12572-UP
156-3680 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
174-1574 Y	[1]	PAN GP-OIL
		S/N 3PD4428-10218
252-8692 Y	[1]	PAN GP-OIL
		S/N 3PD10219-UP
132-3203 Y	[6]	PISTON & ROD GP
138-2028 Y	[1]	PLUG GP-CYLINDER BLOCK
		S/N 3PD4428-12571
265-3855 Y	[1]	PLUG GP-CYLINDER BLOCK
		S/N 3PD12572-UP
174-1760 Y	[1]	PLUG GP-ENGINE
116-5428 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
116-5438 Y	[1]	PUMP GP-FUEL PRIMING
		S/N 3PD4428-12571
263-8506 Y	[1]	PUMP GP-FUEL PRIMING
		S/N 3PD12572-UP
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
174-0620 Y	[1]	STARTING MOTOR GP-ELECTRIC
174-1627 Y	[1]	SUPPORT GP-ENGINE
174-1604 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
171-1103 Y	[1]	WIRING GP-ENGINE
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
174-1545	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
416-2492 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9506 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1433 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1457 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP36860011

285-6406: ENGINE AR

ENGINE AR

285-6406 ENGINE AR
S/N 3PD16669-UP
PART OF 159-7195 GENERAL AR

i02682401 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
234-2413 Y	[1]	AIR COMPRESSOR GP
234-2412 Y	[1]	BELT TENSIONER GP
		S/N 3PD16669-19404
171-3062 Y	[1]	CAMSHAFT GP
232-5990 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
262-7138 Y	[1]	COOLER GP-ENGINE & XMSN OIL
174-1762 Y	[1]	COVER GP-CYLINDER BLOCK
132-3210 Y	[1]	CRANKSHAFT GP
180-6662 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
174-1591 Y	[1]	DRIVE GP-ACCESSORY
174-1579 Y	[1]	FILLER GP-ENGINE OIL
164-2490 Y	[1]	FILTER GP-ENGINE OIL
116-5436 Y	[1]	FILTER GP-FUEL
174-1581 Y	[1]	FLYWHEEL GP
174-1576 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
117-2750 Y	[1]	GEAR GP-FRONT
174-1584 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
215-2063 Y	[1]	HOUSING & REGULATOR GP-MTG
117-2748 Y	[1]	LIFTING GP-ENGINE
233-6663 Y	[1]	LINES GP-FUEL
179-9565 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
255-5307 Y	[1]	LINES GP-WATER (INLET ELBOW)
156-3680 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
138-2550 Y	[1]	MOUNTING GP-FAN DRIVE
		S/N 3PD19405-UP
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
252-8692 Y	[1]	PAN GP-OIL
132-3203 Y	[6]	PISTON & ROD GP
265-3855 Y	[1]	PLUG GP-CYLINDER BLOCK
174-1760 Y	[1]	PLUG GP-ENGINE
116-5428 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
190-6017 Y	[6]	PUMP GP-FUEL INJECTION
263-8506 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
174-0620 Y	[1]	STARTING MOTOR GP-ELECTRIC
174-1627 Y	[1]	SUPPORT GP-ENGINE
174-1604 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
171-1103 Y	[1]	WIRING GP-ENGINE
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR
174-1545	[1]	ELECTRONICS GP-ENGINE RATINGS

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION


		AVAILABLE REPAIR KIT(S):
416-2492 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
417-9506 Y	[1]	KIT-ENGINE OVERHAUL (SILVER)
20R-1433 Y	[1]	KIT-ENGINE OVERHAUL (GOLD)
20R-1457 Y	[1]	KIT-ENGINE OVERHAUL (PLATINUM)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP36860012

131-6679: AIR COMPRESSOR GP

AIR COMPRESSOR GP

131-6679 AIR COMPRESSOR GP
S/N 3PD1-UP
PART OF 133-7031, 234-2413 AIR COMPRESSOR GP

i01855609 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-6178	[2]	BEARING-REAR
2.	7E-8928	[1]	GASKET
3.	3B-4505	[4]	LOCKWASHER (.097IN THK)
4.	4P-3977	[1]	GASKET-CYLINDER HEAD
5.	0S-1617	[12]	BOLT (5/16-18X0.75-IN)
6.	8T-6764	[2]	PLUG-PIPE (1/8-27-THD)
7.	4P-3966	[2]	PISTON & ROD AS
8.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
9.	0L-1352	[6]	BOLT (3/8-16X3.25-IN)
10.	146-0835	[2]	STUD
11.	2H-3934	[1]	SEAL-O-RING
12.	103-6216	[1]	KEY-WOODRUFF
13.	124-5572	[1]	VALVE AS-RELIEF
14.	130-5997	[1]	PLATE-INFORMATION (AIR COMPRESSOR)

			AVAILABLE REPAIR KIT(S):
	7E-8923	[1]	KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)
			(INCLUDES SEALS, BEARINGS, INSERTS, GASKETS, & WASHER)
	7E-8925	[1]	KIT-STANDARD RING (AIR COMPRESSOR)
			(INCLUDES RINGS)
	7E-8926	[1]	KIT-CYLINDER HEAD (AIR COMPRESSOR)
			(INCLUDES GASKETS, PISTONS, SPRINGS, VALVES, SEATS, & O-RING)
	150-5146	[1]	KIT-UNLOADER (AIR COMPRESSOR)

#SEBP36860013

133-7031: AIR COMPRESSOR GP

AIR COMPRESSOR GP

133-7031 AIR COMPRESSOR GP
S/N 3PD1-4427
13.2 CFM AT 1250 RPM, 1.14:1 RATIO. TWO CYLINDER, SINGLE STAGE
PART OF 161-1751 ENGINE AR

i01855298 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-0428 I	[1]	HOSE AS
2.	7W-5499	[1]	ELBOW
3.	6V-8197 M	[3]	BOLT (M12X1.75X40-MM)
4.	8M-7065	[1]	GASKET (AIR INLET)
5.	9M-2904	[1]	CLAMP-HOSE
6.	172-4702	[2]	CLAMP
7.	9Y-1116 I	[1]	HOSE AS
8.	032-3631	[1]	ELBOW
9.	090-8635	[1]	SPACER (11X22X5-MM THK)
10.	117-0221	[1]	RING-PILOT
11.	126-0146	[1]	HOSE-FUMES DISPOSAL
12.	128-0331	[1]	HOSE
13.	128-0420	[1]	GEAR (42-TEETH)
14.	129-2181	[1]	SEAL-INTEGRAL
15.	131-2171	[1]	CONNECTOR
16.	131-6679 Y	[1]	AIR COMPRESSOR GP
17.	153-7062	[1]	BRACKET
18.	166-6352	[1]	TUBE AS (M10X1.50X25MM)
19.	005-0658	[1]	ELBOW-FLARED
19A.	6V-5063	[1]	SEAL-O-RING
20.	001-7043	[1]	ELBOW (12.7MM ID)
21.	118-4728	[1]	ELBOW
22.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
23.	2S-2053	[1]	CLIP (LOOP)
24.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
25.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	5S-0003	[2]	NUT (5/16-18-THD)
27.	6D-4244	[1]	CLIP (LOOP)
28.	6M-7476	[1]	ELBOW
29.	6V-3251	[2]	SEAL-O-RING
30.	6V-4248 M	[3]	BOLT (M10X1.5X25-MM)
31.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
32.	6V-6609	[1]	SEAL-O-RING
33.	6V-7742 M	[1]	NUT-FULL (M20X2.5-THD)
34.	8L-6557	[1]	CONNECTOR
35.	8M-2770	[1]	CLIP (LOOP)
36.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
37.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
38.	9N-0869	[2]	WASHER-HARD (8.8X25.5X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP36860014

234-2413: AIR COMPRESSOR GP

AIR COMPRESSOR GP

234-2413 AIR COMPRESSOR GP
S/N 3PD4428-UP
PART OF 161-1751, 285-6406 ENGINE AR

i01931666 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-0428 I	[1]	HOSE AS
2.	7W-5499	[1]	ELBOW
3.	6V-8197 M	[3]	BOLT (M12X1.75X40-MM)
4.	8M-7065	[1]	GASKET (AIR INLET)
5.	9M-2904	[1]	CLAMP-HOSE
6.	9Y-1116 I	[1]	HOSE AS
7.	032-3631	[1]	ELBOW
8.	090-8635	[1]	SPACER (11X22X5-MM THK)
9.	117-0221	[1]	RING-PILOT
10.	126-0146	[1]	HOSE-FUMES DISPOSAL
11.	128-0331	[1]	HOSE
12.	128-0420	[1]	GEAR (42-TEETH)
13.	129-2181	[1]	SEAL-INTEGRAL
14.	131-2171	[1]	CONNECTOR
15.	131-6679 Y	[1]	AIR COMPRESSOR GP
16.	153-7062	[1]	BRACKET
17.	166-6352	[1]	TUBE AS
18.	166-6368	[1]	ELBOW AS
18A.	005-0658	[1]	ELBOW-FLARED
18B.	6V-5063	[1]	SEAL-O-RING
19.	172-4702	[2]	CLAMP
20.	001-7043	[1]	ELBOW
21.	118-4728	[1]	ELBOW
22.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
23.	2S-2053	[1]	CLIP (LOOP)
24.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
25.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	5S-0003	[2]	NUT (5/16-18-THD)
27.	6V-4369	[1]	CLIP
28.	6M-7476	[1]	ELBOW
29.	6V-3251	[2]	SEAL-O-RING
30.	6V-4248 M	[3]	BOLT (M10X1.5X25-MM)
31.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
32.	6V-6609	[1]	SEAL-O-RING
33.	6V-7742 M	[1]	NUT-FULL (M20X2.5-THD)
34.	8L-6557	[1]	CONNECTOR
35.	8M-2770	[1]	CLIP (LOOP)
36.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
37.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
38.	9N-0869	[2]	WASHER-HARD (8.8X25.5X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP36860015

167-0017: BELT TENSIONER GP

BELT TENSIONER GP

167-0017 BELT TENSIONER GP
S/N 3PD1-4427
PART OF 161-1751 ENGINE AR

i01855421 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-5631	[2]	SPACER (13X26X89.9-MM THK)
2.	123-0790	[1]	PULLEY (8-GROOVE)
3.	142-2011	[1]	PULLEY GP-IDLER
3A.	121-7137	[1]	SEAL-O-RING
3B.	144-5611	[1]	PULLEY AS-IDLER
3C.	179-6851	[1]	SPACER
3D.	179-6852	[1]	COVER
3E.	179-6853 M	[1]	BOLT (M12X1.75X79-MM)
4.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
4A.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
4B.	166-6358	[1]	COVER-DUST
4C.	173-1500	[1]	SPACER (10.4X45.1X1.8-MM THK)
5.	178-4875	[1]	PLATE
6.	178-5252	[1]	PULLEY AS-IDLER
6A.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6B.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
6C.	121-7137	[1]	SEAL-O-RING
6D.	166-6358	[1]	COVER-DUST
6E.	178-5253	[1]	SPACER
7.	123-0764 M	[2]	STUD-TAPERLOCK (M12X1.75X138.7-MM)
8.	190-0649	[1]	BELT TENSIONER
9.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	5R-7137	[2]	WASHER-SEALING
11.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
12.	6V-8004 M	[2]	BOLT (M12X1.75X120-MM)
13.	6V-8149 M	[2]	NUT (M12X1.75-THD)
14.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP36860016

234-2412: BELT TENSIONER GP

BELT TENSIONER GP

234-2412 BELT TENSIONER GP
S/N 3PD4428-UP
PART OF 161-1751, 285-6406 ENGINE AR

i01931604 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5R-7137	[2]	WASHER-SEALING
2.	9Y-5631	[2]	SPACER (13X26X89.9-MM THK)
3.	142-2011	[1]	PULLEY GP-IDLER
3A.	121-7137	[1]	SEAL-O-RING
3B.	144-5611	[1]	PULLEY AS-IDLER
3C.	179-6851	[1]	SPACER
3D.	179-6852	[1]	COVER
3E.	179-6853 M	[1]	BOLT (M12X1.75X79-MM)
4.	169-4657	[1]	BRACKET
5.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
5A.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
5B.	166-6358	[1]	COVER-DUST
5C.	173-1500	[1]	SPACER (10.4X45.1X1.8-MM THK)
6.	178-4875	[1]	PLATE
7.	190-0649	[1]	BELT TENSIONER
8.	230-4171	[1]	PULLEY AS-IDLER
9.	123-0764 M	[2]	STUD-TAPERLOCK (M12X1.75X138.7-MM)
10.	3E-4353	[3]	WASHER-HARD (11X25X3-MM THK)
11.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
12.	6V-1820 M	[3]	BOLT (M10X1.5X30-MM)
13.	6V-3822 M	[2]	BOLT (M10X1.5X35-MM)
14.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
15.	6V-8004 M	[2]	BOLT (M12X1.75X120-MM)
16.	6V-8149 M	[2]	NUT (M12X1.75-THD)
17.	8T-0643 M	[3]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP36860017

171-3062: CAMSHAFT GP

CAMSHAFT GP

171-3062 CAMSHAFT GP
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR

i01855599 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[5]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	178-3643	[1]	PIN-THRUST
4.	133-7068	[1]	GASKET-CAMSHAFT COVER
5.	171-3063	[1]	CAMSHAFT AS
5A.	1B-8705	[1]	KEY-WOODRUFF
5B.	133-7100	[1]	GEAR-CAMSHAFT DRIVE (96-TEETH)
6.	4K-9841	[1]	WASHER (0.406X0.75X0.064-IN THK)
7.	118-0459	[1]	COVER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP36860018

174-1762: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

174-1762 COVER GP-CYLINDER BLOCK
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR

i01855519 SEBP3686

1741762 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-4039	[1]	CAP
2.	7C-1445	[3]	COVER
3.	9X-2097 M	[2]	STUD (M8X1.25-THD)
4.	184-2524	[1]	BRACKET AS
5.	061-9455	[3]	SEAL-O-RING
6.	1H-7339	[1]	SEAL-O-RING
7.	4P-1650	[1]	COVER
8.	4P-6587	[1]	COVER
9.	5P-7970 M	[1]	NUT (M8X1.25-THD)
10.	5S-9134	[1]	SEAL-O-RING
11.	6V-1250	[1]	SEAL-O-RING
12.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
13.	6V-2317 M	[1]	BOLT (M8X1.25X30-MM)
14.	6V-5217 M	[5]	BOLT (M8X1.25X20-MM)
15.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
16.	7C-9542	[1]	COVER-FILTER BASE
17.	9M-1974	[10]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP36860019

132-3210: CRANKSHAFT GP

CRANKSHAFT GP

132-3210 CRANKSHAFT GP
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR

i01855252 SEBP3686

For full view, you need register

Parts for your 160H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	211-0588 J	[3]	BEARING-MAIN
	128-0382 AB		BEARING-MAIN (0.51-MM US)
	128-0383 AB		BEARING-MAIN (0.76-MM US)
	128-0384 AB		BEARING-MAIN (0.51-MM OS)
	128-0385 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
2.	246-3144 J	[2]	PLATE-THRUST
3.	211-0587 J	[4]	BEARING-MAIN
	128-0400 AB		BEARING-MAIN (0.51-MM US)
	128-0401 AB		BEARING-MAIN (0.76-MM US)
	128-0402 AB		BEARING-MAIN (0.51-MM OS)
	128-0403 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
4.	326-4278	[1]	CRANKSHAFT AS
4A.	6V-3536	[1]	DOWEL
4B.	187-8972	[1]	GEAR-CRANKSHAFT (48-TEETH)
4C.	9Y-0821	[1]	SLEEVE (FRONT)
4D.	9Y-0810	[1]	SLEEVE-WEAR (REAR)

			AVAILABLE REPLACEMENT PART(S):
	196-9521 J		BEARING GP-MAIN (CRANKSHAFT)
			(INCLUDES STANDARD MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Engine Design
3176C and 3196 Engines for Caterpillar Built Machines

General Information
3176C and 3196 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Contamination Control Guidelines

Troubleshooting

Engine Will Not Crank
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Low Engine Oil Pressure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Excessive White Smoke
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Excessive Black Smoke
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Excessive White Smoke
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Poor Acceleration or Response
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Overspeeds on Start-up
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Poor Acceleration or Response
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

E190 Engine Overspeed Warning
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Diagnostic Codes
3176C and 3196 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

E190 Engine Overspeed Warning
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Vibration
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Excessive Fuel Consumption
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Misfires, Runs Rough or Is Unstable
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Will Not Crank
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18