206-3553 CYLINDER GP-TILT S/N SHA1-UP 82.55-MM (3.3-IN) BORE X 642.1-MM (25.3-IN) STROKE PART OF 213-9298 LOADER AR 416E



HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
VALVE GP-BANK
FILTER GP
FITTING GP
HYDRAULIC GP
KICKOUT & POSITIONER GP
LINES GP-AUXILIARY

BACKHOE LOADER 416E BACKHOE LOADER SHA
 416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3701 416E SHA   (2006)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SWING
278-1971 CYLINDER GP-SWING
CYLINDER GP-THUMB
275-4243 CYLINDER GP-THUMB
CYLINDER GP-TILT
206-3553 CYLINDER GP-TILT
LINES GP-COUPLER
424-8970 LINES GP-COUPLER
MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
 

#SEBP37010390
 

206-3553: CYLINDER GP-TILT

206-3553 CYLINDER GP-TILT
S/N SHA1-UP
82.55-MM (3.3-IN) BORE X 642.1-MM (25.3-IN) STROKE
PART OF 213-9298 LOADER AR
i01563320 SEBP3701
2063553 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 4T-7010 [1] PISTON  
2. 9T-3948 [1] ROD AS  
2A. 9R-0320 [2] BUSHING  
3. 206-3552 [1] CYLINDER AS  
3A. 7J-9108 [2] SEAL-O-RING  
3B. 9T-0766 [1] BEARING  
4. 167-2192 J [1] SEAL AS-BUFFER  
5. 167-2302 J [1] SEAL-U-CUP  
6. 227-1143 J [1] SEAL-WIPER  
7. 191-6112 [1] HEAD  
8. 1H-7339 J [1] SEAL-O-RING  
9. 2H-3931 J [1] SEAL-O-RING  
10. 4T-6779 J [1] RING  
11. 5P-8250 [1] WASHER (28X49X5-MM THK)  
12. 6J-0793 J [1] SEAL AS  
  6J-0789 [1] RING-EXPANDER  
  6J-0790 [1] SEAL  
13. 5B-9385 [1] BOLT (1-14X2.5-IN)  
14. 8J-2574 J [1] RING-BACKUP  
15. 8J-6371 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  234-2593 J [1] KIT-SEAL (LIFT CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37010391
 

112-1826: DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N SHA1-UP
PART OF 214-6910, 214-6911, 214-6912, 214-6913, 323-3627, 323-3628, 323-3629, 323-3630 POWER TRAIN AR
AN ATTACHMENT
i00200867 SEBP3701
1121826 DRIVE & MTG GP-PUMP Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 8T-9405 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
2. 9U-8886 [1] RING-SEAL  
3. 115-1918 [1] PLATE  
4. 117-3534 [1] ADAPTER  
5. 274-4555 [1] HUB  
6. 128-5596 Y [1] SHAFT GP-PUMP DRIVE  
7. 175-7904 [1] SEAL-O-RING  
8. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
9. 8T-7338 M [2] BOLT (M16X2X45-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37010392
 

219-8566: FASTENER GP-VALVE

219-8566 FASTENER GP-VALVE -BANK
S/N SHA1-UP
PART OF 209-9943 VALVE AR-BANK 2, 209-9944 VALVE AR-BANK 3
AN ATTACHMENT
i02125711 SEBP3701
2198566 FASTENER GP-VALVE Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
2. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP37010393
 

210-6243: FILTER GP-OIL

210-6243 FILTER GP-OIL -HYDRAULIC
S/N SHA1-UP
PART OF 214-2198 HYDRAULIC AR
i03405464 SEBP3701
2106243 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 164-6709 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
2. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
3. 6V-9830 [1] CAP (ORFS)  
4. 6V-9833 [1] CAP AS  
5. 126-1817 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)  
 

#SEBP37010394
 

132-8769: FITTING GP-HYDRAULIC

132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N SHA1-UP
AN ATTACHMENT
i00201053 SEBP3701
1328769 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 106-0406 [1] FITTING (QUICK DISCONNECT, MALE)  
2. 106-0401 [1] FITTING (QUICK DISCONNECT, FEMALE)  
 

#SEBP37010395
 

214-2198: HYDRAULIC AR

214-2198 HYDRAULIC AR
S/N SHA1-UP
PART OF 213-9271, 339-1850 COMMON AR
i04046694 SEBP3701
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
  262-7050 Y [1] CYLINDER GP-STABILIZER (RH)  
    S/N SHA1-7335
  291-2682 Y [1] CYLINDER GP-STABILIZER (RH)  
    S/N SHA7336-UP
  262-7049 Y [1] CYLINDER GP-STABILIZER (LH)  
    S/N SHA1-7289
  291-2681 Y [1] CYLINDER GP-STABILIZER (LH)  
    S/N SHA7290-UP
  278-1971 Y [2] CYLINDER GP-SWING (SWING)  
    -OR-
  269-0381 Y [2] CYLINDER GP-SWING  
  210-6243 Y [1] FILTER GP-OIL (HYDRAULIC)  
  216-5332 Y [1] LINES GP-DRAIN  
  257-3160 Y [1] LINES GP-HYDRAULIC OIL COOLER  
  219-8568 Y [1] LINES GP-PILOT (SIGNAL)  
  219-8567 Y [1] LINES GP-PUMP  
  232-1248 Y [1] LINES GP-SWING  
  247-7868 Y [1] PUMP GP-METERING (HMU)  
  247-7867 Y [1] PUMP GP-PISTON  
    S/N SHA1-2590;2613-2622
  296-6714 Y [1] PUMP GP-PISTON  
    S/N SHA2591-2612;2623-UP
  245-8777 Y [1] TANK & MTG GP-HYDRAULIC  
   
  Y   SEPARATE ILLUSTRATION
 

#SEBP37010396
 

220-5973: KICKOUT & POSITIONER GP

220-5973 KICKOUT & POSITIONER GP
S/N SHA1-2706
PART OF 213-9298 LOADER AR, 209-9943 VALVE AR-BANK 2, 209-9944 VALVE AR-BANK 3
ALSO AN ATTACHMENT
i02099628 SEBP3701
2205973 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 290-8140 [1] LEVER AS  
  7Y-0336 [1] SPACER (24.5X44X24-MM THK)  
  9R-2614 [1] BEARING  
2. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
3. 268-5689 [1] FILM-IDENTIFICATION (BUCKET LEVEL)  
4. 8T-0706 [1] RING-RETAINING  
5. 8T-5063 [1] ROD END  
6. 9R-3255 [1] LEVER  
7. 9R-5301 [2] PIN-COTTER  
8. 128-7902 [1] SPACER (60.25X75X6-MM THK)  
9. 128-7903 B [1] SPACER (61X114.3X3-MM THK)  
10. 128-7905 B [1] SPACER (61X114.3X1-MM THK)  
11. 279-6052 [1] LINK AS  
12. 130-5891 [1] LEVER AS  
13. 130-7952 [1] PLATE  
14. 140-6009 [1] LEVER AS  
15. 141-6343 [1] SPRING  
16. 290-8139 [1] PLATE AS  
  220-5974 [1] PLATE  
17. 106-7301 [1] ROD AS  
18. 227-5571 [1] TUBE AS  
19. 272-0555 [1] PIVOT AS  
20. 1B-8736 [1] KEY-WOODRUFF  
21. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
22. 272-0557 [1] PLATE AS  
23. 8C-6955 [1] END-YOKE ROD  
24. 8T-4123 [8] WASHER (3.62X5.75X0.375-MM THK)  
25. 8T-4133 M [2] NUT (M10X1.5-THD)  
26. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
27. 9R-2806 [2] PIN  
28. 9R-2807 [4] CLIP (RETAINER)  
29. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37010397
 

220-5973: KICKOUT & POSITIONER GP

220-5973 KICKOUT & POSITIONER GP
S/N SHA2707-7233
PART OF 213-9298 LOADER AR, 209-9943 VALVE AR-BANK 2, 209-9944 VALVE AR-BANK 3
ALSO AN ATTACHMENT
i02808587 SEBP3701
2205973 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 290-8140 [1] LEVER AS  
  7Y-0336 [1] SPACER (24.5X44X24-MM THK)  
  9R-2614 [1] BEARING  
2. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
3. 268-5689 C [1] FILM-IDENTIFICATION (BUCKET LEVEL)  
4. 8T-0706 [1] RING-RETAINING  
5. 8T-5063 [1] ROD END  
6. 9R-3255 [1] LEVER  
7. 9R-5301 [2] PIN-COTTER  
8. 128-7902 [1] SPACER (60.25X75X6-MM THK)  
9. 128-7903 B [1] SPACER (61X114.3X3-MM THK)  
10. 128-7905 B [1] SPACER (61X114.3X1-MM THK)  
11. 279-6052 [1] LINK AS  
12. 130-5891 [1] LEVER AS  
13. 130-7952 [1] PLATE  
14. 140-6009 [1] LEVER AS  
15. 141-6343 [1] SPRING  
16. 290-8139 [1] PLATE AS  
  220-5974 [1] PLATE  
17. 106-7301 [1] ROD AS  
18. 297-2831 C [1] PIPE AS  
19. 272-0555 [1] PIVOT AS  
20. 1B-8736 [1] KEY-WOODRUFF  
21. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
22. 272-0557 [1] PLATE AS  
23. 8C-6955 [1] END-YOKE ROD  
24. 8T-4123 [8] WASHER (3.62X5.75X0.375-MM THK)  
25. 8T-4133 M [2] NUT (M10X1.5-THD)  
26. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
27. 9R-2806 [2] PIN  
28. 9R-2807 [4] CLIP (RETAINER)  
29. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37010398
 

220-5973: KICKOUT & POSITIONER GP

220-5973 KICKOUT & POSITIONER GP
S/N SHA7234-UP
PART OF 213-9298 LOADER AR, 209-9943 VALVE AR-BANK 2, 209-9944 VALVE AR-BANK 3
ALSO AN ATTACHMENT
i03880453 SEBP3701
2205973 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 9R-3255 [1] LEVER  
2. 106-7301 [1] ROD AS  
3. 128-7902 [1] SPACER (60.25X75X6-MM THK)  
4. 128-7903 B [1] SPACER (61X114.3X3-MM THK)  
5. 128-7905 B [1] SPACER (61X114.3X1-MM THK)  
6. 130-5891 [1] LEVER AS  
  7Y-0336 [1] SPACER (24.5X44X24-MM THK)  
  9R-2614 [1] BEARING  
  9R-3135 [1] PIN  
7. 130-7952 [1] PLATE  
8. 140-6009 [1] LEVER AS  
9. 141-6343 [1] SPRING  
10. 268-5689 [1] FILM-IDENTIFICATION (BUCKET LEVEL)  
11. 279-6052 [1] LINK AS  
12. 290-8139 [1] PLATE AS  
  220-5974 [1] PLATE  
13. 316-3317 C [1] LEVER AS  
13A. 9R-2614 [1] BEARING  
14. 316-5561 C [1] TUBE AS  
15. 326-8834 C [1] PLATE  
16. 1B-8736 [1] KEY-WOODRUFF  
17. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
18. 8C-6955 [1] END-YOKE ROD  
19. 8T-0706 [1] RING-RETAINING  
20. 8T-4121 C [3] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4123 [8] WASHER (3.62X5.75X0.375-MM THK)  
22. 8T-4133 M [2] NUT (M10X1.5-THD)  
23. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
24. 8T-5063 [1] ROD END  
25. 8T-6658 C [1] PIN  
26. 9R-2806 [2] PIN  
27. 9R-2807 C [5] CLIP (RETAINER)  
28. 9R-5301 [2] PIN-COTTER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37010399
 

249-7912: LINES GP-BACKHOE AUXILIARY

249-7912 LINES GP-BACKHOE AUXILIARY
S/N SHA1-UP
FOR USE WITH @@@@@209-9929@@@@@, @@@@@209-9935@@@@@, @@@@@212-0206@@@@@
AN ATTACHMENT
i02112695 SEBP3701
2497912 LINES GP-BACKHOE AUXILIARY Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 4W-3753 [2] SPACER (13.5X25X38.1-MM THK)  
2. 106-0401 [1] FITTING (QUICK DISCONNECT, FEMALE)  
3. 106-0406 [1] FITTING (QUICK DISCONNECT, MALE)  
4. 109-1260 [2] BRACKET  
5. 144-8344 [1] SPACER (11X19X20-MM THK)  
6. 155-2026 [1] UNION AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8998 [1] UNION  
7. 217-2617 [1] TUBE AS  
8. 217-2699 I [1] HOSE AS  
9. 241-6226 [1] TEE AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
  241-6225 [1] TEE  
10. 241-8448 [2] FILM-WARNING (HYD PRESS, READ OMM, U.S.)  
11. 290-6711 I [1] HOSE AS  
12. 251-9360 [1] TUBE AS  
13. 252-0200 I [1] HOSE AS  
14. 277-4543 [1] BRACKET AS  
15. 281-4726 [2] FILM-INSTRUCTION (OIL FLOW DIRECTION)  
16. 148-8392 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW  
17. 150-3053 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  108-3872 [1] CONNECTOR  
18. 262-4459 I [1] HOSE AS  
19. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
20. 5K-9090 [2] SEAL-O-RING  
21. 5P-7466 [4] CLIP (SLOT)  
22. 5P-7467 [4] CLIP (TAB)  
23. 5P-8112 [4] GROMMET  
24. 8S-0023 [1] CLIP (SLOT)  
25. 6V-9170 [1] NUT-BULKHEAD (1-14-THD)  
26. 6V-9172 [1] NUT (1-7/16-12-THD)  
27. 6V-9746 [1] SEAL-O-RING  
28. 7X-7729 [2] WASHER (11X25X3-MM THK)  
29. 8T-1889 [3] CLIP (SLOT)  
30. 8T-1890 [3] CLIP (TAB)  
31. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [1] NUT (M10X1.5-THD)  
33. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
34. 7X-2549 M [2] BOLT (M12X1.75X100-MM)  
35. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
36. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
37. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8S-0024 [1] CLIP (TAB)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 416E :

CYLINDER GP-THUMB
275-4243 CYLINDER GP-THUMB
CYLINDER GP-SWING
278-1971 CYLINDER GP-SWING
CYLINDER GP-SWING
269-0381 CYLINDER GP-SWING
CYLINDER GP-STICK
210-7078 CYLINDER GP-STICK
CYLINDER GP-STICK
210-7077 CYLINDER GP-STICK
CYLINDER GP-STABILIZER
291-2682 CYLINDER GP-STABILIZER
CYLINDER GP-STABILIZER
291-2681 CYLINDER GP-STABILIZER
CYLINDER GP-STABILIZER
262-7050 CYLINDER GP-STABILIZER
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
FASTENER GP-VALVE
219-8566 FASTENER GP-VALVE
FILTER GP-OIL
210-6243 FILTER GP-OIL
FITTING GP-HYDRAULIC
132-8769 FITTING GP-HYDRAULIC
214-2198 HYDRAULIC AR
KICKOUT & POSITIONER GP
220-5973 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
220-5973 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
220-5973 KICKOUT & POSITIONER GP

Truck sale:

Caterpillar 416EOEM, Construction
43,300 
Caterpillar 416EOEM, Construction
- backhoe loader
EMPIRE MACHINERY
Caterpillar 18 BUCKET FOR 416E, Construction
525 
Caterpillar 18 BUCKET FOR 416E, Construction
- bucket
KELLY TRACTOR CO.
Caterpillar 416 E, Construction
80,500 
Caterpillar 416 E, Construction
- backhoe loader
MILTON CAT
CATERPILLAR 416E 2012
 
CATERPILLAR 416E 2012
- BACKHOE LOADERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR 416E 2006
 
CATERPILLAR 416E 2006
- BACKHOE LOADERS
PETERSON TRACTOR CO