AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

233-6560 WIRING GP-ENGINE S/N EWF607-UP PART OF 230-4104 CHASSIS AR IT28G INTEGRATED TOOLCARRIER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

INTEGRATED TOOLCARRIER IT28G INTEGRATED TOOLCARRIER EWF
 IT28G Integrated Toolcarrier EWF00001-UP (MACHINE) POWERED BY 3056E Engine SEBP3704 IT28G EWF   (2002)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
233-6560 WIRING GP-ENGINE
WIRING GP-ENGINE
233-6560 WIRING GP-ENGINE
WIRING GP-FRONT
123-7333 WIRING GP-FRONT
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-REAR
180-8804 WIRING GP-REAR
 

#SEBP37040160
 

233-6560: WIRING GP-ENGINE

233-6560 WIRING GP-ENGINE
S/N EWF607-UP
PART OF 230-4104 CHASSIS AR
i02673178 SEBP3704
2336560 WIRING GP-ENGINE Parts scheme 2336560 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-3425 CD CHANNEL-TRIM (0.2-M)  
2. 3S-2093 C [13] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 7K-1181 C [21] STRAP-CABLE  
5. 8T-8827 [5] BOOT (RED)  
6. 111-6940 [1] SPACER (13.1X15.9X36.5-MM THK)  
7. 118-3534 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
8. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)  
9. 131-3201 [4] BOOT  
10. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
11. 135-3327 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 143-9542 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
13. 148-5318 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
14. 148-8298 [1] WIRE AS  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(MAIN)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  253-2111 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
18. 225-5224 [1] CABLE AS  
19. 226-5923 [1] BRACKET  
20. 230-4927 [2] CLAMP-HALF  
21. 232-6555 [1] HARNESS AS-ENGINE  
22. 233-6561 [1] PLATE AS  
23. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
24. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)(AUXILIARY)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
25. 3K-0360 [1] SEAL-O-RING  
26. 3P-2404 [1] CLIP  
27. 3S-8665 [2] CLIP (LOOP)  
28. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
30. 4P-7581 [10] CLIP (LADDER)(LADDER)  
31. 4P-8134 [4] CLIP (LADDER)(LADDER)  
32. 5C-8312 M [6] NUT (M4X0.7-THD)  
33. 5P-4965 [4] SCREW-MACHINE (10-32X1-IN)  
34. 6V-1889 [1] CLIP (LOOP)  
35. 6V-7345 [4] SCREW-MACHINE (8-32X0.875-IN)  
36. 6V-9491 M [6] SCREW-MACHINE (M4X0.7X20-MM)  
37. 7X-7729 [1] WASHER (11X25X3-MM THK)  
38. 8T-4121 C [10] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
40. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
41. 8T-4171 M [5] BOLT (M6X1X12-MM)  
42. 304-4008 C [1] TAG-IDENTIFICATION (EMERGENCY STOP)  
43. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
44. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
45. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
46. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
47. 8T-4200 M [5] BOLT (M8X1.25X16-MM)  
48. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4224 C [7] WASHER-HARD (8.8X16X2-MM THK)  
50. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
51. 8T-9534 M [2] BOLT (M6X1X50-MM)  
52. 9M-4972 [2] CLIP (LOOP)  
53. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
54. 132-5789 C [1] CLIP (LADDER)  
55. 3E-5239 [1] RELAY AS (24-VOLT)(ETHER AID)  
56. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
57. 3E-5239 [1] RELAY AS (24-VOLT)(LIFT PUMP)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37040161
 

123-7333: WIRING GP-FRONT

123-7333 WIRING GP-FRONT
S/N EWF1-UP
PART OF 230-4104 CHASSIS AR
i01069332 SEBP3704
1237333 WIRING GP-FRONT Parts scheme 1237333 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [21] STRAP-CABLE  
2. 8T-8737 [8] PLUG-SEAL  
3. 163-1201 C [1] HORN AS (24-VOLT, LOW TONE)  
4. 176-0302 [1] HARNESS AS-FRONT (FRONT CHASSIS)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [11] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [30] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8L-8413 [12] STRAP-CABLE (WHITE)  
  1P-0810 B TAPE-ELECTRICAL  
  9X-0196 [2] TERMINAL AS (16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  5P-0765 E HOSE (40-CM)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [6] PLUG-SEAL  
5. 194-4121 [4] SPACER (10.1X15.9X70-MM THK)  
6. 194-8111 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 194-8112 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 194-8113 [2] PLATE  
9. 194-8114 [2] BLOCK  
10. 231-7994 [2] BLOCK  
11. 231-7995 [2] BLOCK  
12. 2H-9524 [2] GROMMET  
13. 102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
14. 4P-8134 [1] CLIP (LADDER)  
15. 7B-1251 [2] GROMMET  
16. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
18. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37040162
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N EWF1-507
PART OF 230-4104 CHASSIS AR
i01774687 SEBP3704
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [34] STRAP-CABLE  
2. 204-1370 [1] GASKET  
3. 224-9612 [1] HARNESS AS-REAR CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
4. 132-5789 [2] CLIP (LADDER)  
5. 194-7265 [1] SENDER AS-FUEL LEVEL  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 4P-7581 [3] CLIP (LADDER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 5C-9553 M [8] BOLT (M6X1X16-MM)  
9. 5P-6264 [4] GROMMET  
10. 8D-9671 [1] CLIP  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
13. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
   
  8T-4224 F [1] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP37040163
 

180-8804: WIRING GP-REAR

180-8804 WIRING GP-REAR
S/N EWF508-UP
PART OF 230-4104 CHASSIS AR
i02495259 SEBP3704
1808804 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-7127 C [1] BRACKET  
2. 281-5619 C [1] ROD  
3. 7K-1181 B [34] STRAP-CABLE  
4. 195-1141 C [3] SPACER (7.2X18X11-MM THK)  
5. 204-1370 [1] GASKET  
6. 224-9612 [1] HARNESS AS-REAR CHASSIS  
7. 132-5789 C [2] CLIP (LADDER)  
8. 179-8235 C [1] LOCK PIN  
9. 313-4615 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 1B-0676 C [1] PIN  
11. 4P-7581 [3] CLIP (LADDER)  
12. 4P-8134 [3] CLIP (LADDER)  
13. 5C-9553 CM [5] BOLT (M6X1X16-MM)  
14. 5P-4116 C [1] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 5P-6264 [4] GROMMET  
16. 8D-9671 [1] CLIP  
17. 8T-4121 C [5] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 CM [1] NUT (M10X1.5-THD)  
19. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
20. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4815 C [1] ROD END  
22. 8T-4908 CM [1] BOLT (M8X1.25X25-MM)  
23. 8T-4971 CM [3] BOLT (M6X1X30-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37040164
 

180-8810: WIRING GP-SECONDARY STEERING

180-8810 WIRING GP-SECONDARY STEERING
S/N EWF1-274
PART OF 203-4659 STEERING AR-SECONDARY
AN ATTACHMENT
i01740568 SEBP3704
1808810 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0154 Y [1] SWITCH GP-MAGNETIC (SECONDARY STEERING)  
2. 7K-1181 [6] STRAP-CABLE  
3. 8X-9618 [1] STRAP AS-GROUND  
4. 9L-1566 [1] SUPPORT  
5. 118-5597 [1] DIODE AS  
6. 158-5089 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
7. 180-8860 [1] HARNESS AS-STEERING (SECONDARY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
8. 185-2768 [1] SWITCH AS-ROCKER (SECONDARY STEERING)  
  111-7899 [1] GASKET  
9. 208-9645 [1] CABLE AS  
10. 208-9646 [1] CABLE AS  
11. 4P-8134 [1] CLIP (LADDER)  
12. 5P-9299 [3] CLIP (LOOP)  
13. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [3] NUT (M10X1.5-THD)  
15. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
16. 8T-4171 M [4] BOLT (M6X1X12-MM)  
17. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
19. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
20. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 3W-6188 [1] BRACKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37040165
 

180-8810: WIRING GP-SECONDARY STEERING

180-8810 WIRING GP-SECONDARY STEERING
S/N EWF275-UP
PART OF 203-4659 STEERING AR-SECONDARY
AN ATTACHMENT
i02303873 SEBP3704
1808810 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-0006 Y [1] SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(SECONDARY STEERING)  
2. 7K-1181 [6] STRAP-CABLE  
3. 8X-9618 [1] STRAP AS-GROUND  
4. 9L-1566 [1] SUPPORT  
5. 118-5597 [1] DIODE AS  
6. 158-5089 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
7. 180-8860 [1] HARNESS AS-STEERING (SECONDARY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 185-2768 [1] SWITCH AS-ROCKER (SECONDARY STEERING)  
  111-7899 [1] GASKET  
9. 208-9645 [1] CABLE AS  
10. 208-9646 [1] CABLE AS  
11. 4P-8134 [1] CLIP (LADDER)  
12. 5P-9299 C [2] CLIP (LOOP)  
13. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [3] NUT (M10X1.5-THD)  
15. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
16. 8T-4171 M [4] BOLT (M6X1X12-MM)  
17. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 3W-6188 [1] BRACKET  
19. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
20. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37040166
 

203-2761: AXLE AR-FIXED

203-2761 AXLE AR-FIXED -SINGLE DISC BRAKE-FRONT, STANDARD DIFFERENTIAL
S/N EWF1-UP
AN ATTACHMENT
i01739941 SEBP3704
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  163-5775 Y [2] BRAKE & PLANETARY GP (SINGLE DISC)  
  151-6142 Y [1] DIFFERENTIAL GP (STANDARD)  
  203-2762 Y [1] GEAR GP-BEVEL & PINION (FRONT)  
  203-2763 Y [1] HOUSING GP-FIXED AXLE (FRONT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37040167
 

203-2752: AXLE AR-OSCILLATING

203-2752 AXLE AR-OSCILLATING -SINGLE DISC BRAKE-REAR, STANDARD DIFFERENTIAL
S/N EWF1-599
PART OF 203-5947 AXLE AR-OSCILLATING
AN ATTACHMENT
i01742857 SEBP3704
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  163-5775 Y [2] BRAKE & PLANETARY GP (SINGLE DISC)  
  151-6142 Y [1] DIFFERENTIAL GP (STANDARD)  
  203-2753 Y [1] GEAR GP-BEVEL & PINION (REAR)  
  203-2754 Y [1] HOUSING GP-OSCILLATING AXLE (REAR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37040168
 

203-5947: AXLE AR-OSCILLATING

203-5947 AXLE AR-OSCILLATING -SINGLE DISC BRAKE-REAR, STANDARD DIFFERENTIAL
S/N EWF1-UP
AN ATTACHMENT
i02638879 SEBP3704
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] AXLE AR-OSCILLATING (REAR, STANDARD DIFFERENTIAL)  
    -OR-
  Y [1] AXLE AR-OSCILLATING (REAR, STANDARD DIFFERENTIAL)  
  203-3881 Y [1] LINES GP-HYDRAULIC FAN  
    -OR-
  243-0680 Y [1] LINES GP-HYDRAULIC FAN  
    -OR-
  262-5662 Y [1] LINES GP-HYDRAULIC FAN  
  192-4367 Y [1] LINES GP-WATER (RADIATOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37040169
 

267-7373: AXLE AR-OSCILLATING

267-7373 AXLE AR-OSCILLATING -SINGLE DISC BRAKE-REAR, STANDARD DIFFERENTIAL
S/N EWF500-UP
PART OF 203-5947 AXLE AR-OSCILLATING
AN ATTACHMENT
i02589938 SEBP3704
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  267-7415 Y [2] BRAKE & PLANETARY GP (SINGLE DISC)  
  151-6142 Y [1] DIFFERENTIAL GP (STANDARD)  
  203-2753 Y [1] GEAR GP-BEVEL & PINION (REAR)  
  203-2754 Y [1] HOUSING GP-OSCILLATING AXLE (REAR)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog IT28G :

WIRING GP-ENGINE
233-6560 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
258-0807 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
219-2462 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CAB LIFT
233-5531 WIRING GP-CAB LIFT
WIRING GP-CAB
233-6562 WIRING GP-CAB
WIRING GP-CAB
233-6562 WIRING GP-CAB
WIRING GP-CAB
190-4340 WIRING GP-CAB
WIRING GP-FRONT
123-7333 WIRING GP-FRONT
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-REAR
180-8804 WIRING GP-REAR
WIRING GP-SECONDARY STEERING
180-8810 WIRING GP-SECONDARY STEERING
WIRING GP-SECONDARY STEERING
180-8810 WIRING GP-SECONDARY STEERING
203-2761 AXLE AR-FIXED
203-2752 AXLE AR-OSCILLATING
203-5947 AXLE AR-OSCILLATING

Truck sale:

Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
MILTON CAT
Caterpillar IT28G, Wheel Loaders, Construction
37,500 
Caterpillar IT28G, Wheel Loaders, Construction
- Wheel Loaders
OHIO CAT
Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
ZIEGLER CAT
 
48,707 
Caterpillar IT28G, Wheel Loaders, Construction


Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.