OPERATOR STATION
HEATER GPRADIO GP
CAB GP
OPERATOR STATION
HEATER GP
#SEBP37040430
236-7719: HEATER & MTG GP-CAB
236-7719 HEATER & MTG GP-CAB -WITH CONTROL
S/N EWF1-664
PART OF 237-3576 HEATER AR-CAB
AN ATTACHMENT
S/N EWF1-664
PART OF 237-3576 HEATER AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5643 D | SEAL (0.8-M EACH) | ||
| 2. | 118-7259 | [1] | GASKET | |
| 3. | 156-4452 | [1] | CABLE AS (HEATER CONTROL) | |
| 4. | 180-9874 Y | [1] | HEATER GP-CAB | |
| 5. | 7X-0579 | [11] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 6. | 8T-4908 M | [11] | BOLT (M8X1.25X25-MM) | |
| 7. | 236-4238 | [1] | SWITCH AS-ROCKER (HEATER CONTROL) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37040431
236-7719: HEATER & MTG GP-CAB
236-7719 HEATER & MTG GP-CAB -WITH CONTROL
S/N EWF665-UP
PART OF 237-3576 HEATER AR-CAB
AN ATTACHMENT
S/N EWF665-UP
PART OF 237-3576 HEATER AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5643 D | SEAL (0.8-M EACH) | ||
| 2. | 118-7259 | [1] | GASKET (CAB HEATER) | |
| 3. | 156-4452 | [1] | CABLE AS (HEATER CONTROL) | |
| 143-8874 | [1] | BOOT | ||
| 4. | 306-8141 CY | [1] | HEATER GP-CAB | |
| 5. | 7X-0579 | [11] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 6. | 8T-4908 M | [11] | BOLT (M8X1.25X25-MM) | |
| 7. | 236-4238 | [1] | SWITCH AS-ROCKER (HEATER CONTROL) | |
| 8. | 280-2710 C | [1] | CIRCUIT BREAKER AS (20-AMPERE, MANUAL RESET) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37040432
237-3576: HEATER AR-CAB
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP37040433
180-9874: HEATER GP-CAB
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5908 D | SEAL (0.1-M) | ||
| 2. | 3E-1841 | [1] | LEVER | |
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 8C-4586 | [2] | CLAMP | |
| 5. | 8Y-5737 | [1] | CLAMP | |
| 6. | 9G-1950 | [1] | RESISTOR | |
| 7. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 8. | 9X-2488 | [6] | CLAMP-HOSE | |
| 9. | 100-3143 | [2] | PLATE-ORIFICE | |
| 10. | 100-3426 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [2] | CLAMP | ||
| 11. | 102-0341 | [1] | CLIP (TAB) | |
| 12. | 114-3140 | [1] | GROMMET | |
| 13. | 118-5044 | [1] | HARNESS AS-WIRING (CAB HEATER) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 6T-6505 | [5] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 6T-6506 | [5] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 14. | 118-5046 | [1] | HOUSING AS (CAB) | |
| 15. | 124-8494 | [1] | GASKET | |
| 16. | 124-8495 | [1] | VALVE AS-WATER (CAB HEATER) | |
| 17. | 151-0894 | [1] | COVER AS | |
| 18. | 156-6819 | [1] | CASE AS | |
| 6V-9632 M | [9] | NUT-WELD (M6X1-THD) | ||
| 19. | 174-1486 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE & WEDGE) | ||||
| 20. | 183-7528 | [1] | COIL AS-HEATER | |
| 21. | 037-4426 | [1] | RETAINER | |
| 22. | 129-3178 M | [3] | LOCKNUT (M6X1-THD) | |
| 23. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 24. | 1P-6522 | [1] | GROMMET | |
| 25. | 2S-3745 | [6] | SCREW-TAPPING (10-16X0.5-IN) | |
| 26. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 27. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 28. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 29. | 8C-8457 M | [1] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 30. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 31. | 8T-4205 | [11] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 32. | 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 33. | 136-1953 E | HOSE (56-CM) | ||
| 34. | 8T-5372 D | SEAL (0.4-M) | ||
| 35. | 6V-1392 D | SEAL (0.8-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37040434
306-8141: HEATER GP-CAB
306-8141 HEATER GP-CAB
S/N EWF665-UP
PART OF 236-7719 HEATER & MTG GP-CAB
AN ATTACHMENT
S/N EWF665-UP
PART OF 236-7719 HEATER & MTG GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-1841 | [1] | LEVER | |
| 2. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 3. | 8Y-5737 | [1] | CLAMP | |
| 4. | 9G-1950 | [1] | RESISTOR (CAB FAN SPEED) | |
| 5. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 6. | 102-0341 | [1] | CLIP (TAB) | |
| 7. | 114-3140 | [1] | GROMMET | |
| 8. | 124-8495 | [1] | VALVE AS-WATER (CAB HEATER) | |
| 9. | 151-0894 | [1] | COVER AS | |
| 10. | 183-7528 | [1] | COIL AS-HEATER | |
| 11. | 255-9138 | [1] | BRACKET AS | |
| 9X-2032 M | [8] | NUT-WELD (M4X0.7-THD) | ||
| 12. | 438-3170 | [1] | BLOWER AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 13. | 309-8677 | [1] | CASE AS | |
| 14. | 3S-2093 | [1] | STRAP-CABLE | |
| 15. | 037-4426 | [1] | RETAINER | |
| 16. | 124-8494 | [1] | GASKET | |
| 17. | 129-3178 M | [2] | LOCKNUT (M6X1-THD) | |
| 18. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 19. | 1P-6522 | [1] | GROMMET | |
| 20. | 5C-9553 M | [6] | BOLT (M6X1X16-MM) | |
| 21. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 22. | 6V-5210 M | [8] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 23. | 8C-8457 M | [1] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 25. | 8T-4205 | [9] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 27. | 9X-2488 | [6] | CLAMP-HOSE | |
| 28. | 6V-1392 D | SEAL (0.6-M) | ||
| 28A. | 6V-1392 D | SEAL (0.07-M EACH) | ||
| 29. | 8T-5372 D | SEAL (0.13-M EACH) | ||
| 29A. | 8T-5372 | SEAL (0.15-M) | ||
| 30. | 136-1953 E | HOSE (23-CM) | ||
| 30A. | 136-1953 E | HOSE (18-CM) | ||
| 30B. | 136-1953 E | HOSE (15-CM) | ||
| 31. | 118-5044 | [1] | HARNESS AS-WIRING (CAB HEATER) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37040435
333-2741: HEATER GP-CAB
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-1841 | [1] | LEVER | |
| 2. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 3. | 7F-2050 | [1] | LOCKNUT (3/4-16-THD) | |
| 4. | 8Y-5737 | [1] | CLAMP | |
| 5. | 9G-1950 | [1] | RESISTOR | |
| 6. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 7. | 9X-2488 | [6] | CLAMP-HOSE | |
| 8. | 102-0341 | [1] | CLIP (TAB) | |
| 9. | 114-3140 | [1] | GROMMET | |
| 10. | 118-5044 | [1] | HARNESS AS-WIRING (CAB HEATER) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 6T-6505 | [5] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 6T-6506 | [5] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 119-9631 | [1] | SWITCH-TEMPERATURE (CAB HEATER) | |
| 12. | 124-8495 | [1] | VALVE AS-WATER (CAB HEATER) | |
| 13. | 151-0894 | [1] | COVER AS | |
| 14. | 153-6932 | [1] | GASKET | |
| 15. | 183-7528 | [1] | COIL AS-HEATER | |
| 16. | 255-9138 | [1] | BRACKET AS | |
| 9X-2032 M | [8] | NUT-WELD (M4X0.7-THD) | ||
| 17. | 438-3170 | [1] | BLOWER AS (HEATER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 18. | 309-8618 | [1] | CASE AS | |
| 19. | 328-3316 | [1] | COIL AS | |
| 20. | 3S-2093 | [3] | STRAP-CABLE | |
| 21. | 037-4426 | [1] | RETAINER | |
| 22. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 23. | 124-8494 | [2] | GASKET | |
| 24. | 129-3178 M | [2] | LOCKNUT (M6X1-THD) | |
| 25. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 26. | 1P-6522 | [1] | GROMMET | |
| 27. | 2H-3922 | [1] | LOCKWASHER | |
| 28. | 2H-3923 | [1] | LOCKWASHER | |
| 29. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 30. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
| 31. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 32. | 6V-5210 M | [8] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 33. | 7F-2060 | [1] | LOCKNUT (7/8-14-THD) | |
| 34. | 8C-8457 M | [1] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 35. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 36. | 8T-4205 | [11] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 37. | 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 38. | 136-1953 E | HOSE (17.8-CM) | ||
| 38A. | 136-1953 E | HOSE (15.2-CM) | ||
| 38B. | 136-1953 E | HOSE (22.9-CM) | ||
| 39. | 5P-7070 D | INSULATION-STRIP (1.24-M EACH) | ||
| 40. | 5P-5643 D | SEAL (1-M) | ||
| 41. | 8T-5372 D | SEAL (0.144-M) | ||
| 41A. | 8T-5372 D | SEAL (0.121-M EACH) | ||
| 42. | 6V-1392 D | SEAL (0.605-M) | ||
| 42A. | 6V-1392 D | SEAL (0.168-M EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37040436
107-4645: INSTALLATION GP-RADIO
107-4645 INSTALLATION GP-RADIO
S/N EWF1-UP
PART OF 225-4329 INSTALLATION GP-RADIO
AN ATTACHMENT
S/N EWF1-UP
PART OF 225-4329 INSTALLATION GP-RADIO
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1411 | [1] | BUSHING-TERMINAL | |
| 2. | 168-8772 | [2] | SPEAKER AS-RADIO | |
| 3. | 174-6491 | [1] | HARNESS AS-RADIO (SPEAKERS) | |
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPATACLE AS & WEDGE) | ||||
| 180-9340 | [8] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [14] | STRAP-CABLE (WHITE) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 8C-6440 | [8] | SCREW-PAN HEAD (10-16X0.5-IN) | |
| 6. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP37040437
225-4329: INSTALLATION GP-RADIO
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP37040438
107-4634: LINER GP-CAB
107-4634 LINER GP-CAB -UPPER
S/N EWF1-UP
PART OF 244-2251 CAB AR-ENCLOSED ROPS, 230-7290 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
S/N EWF1-UP
PART OF 244-2251 CAB AR-ENCLOSED ROPS, 230-7290 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8928 | [1] | HOOK-COAT | |
| 2. | 107-6032 | [1] | LAMP AS-DOME (24-VOLT) | |
| 259-1286 | [1] | LAMP (24-VOLT, 10-WATT) | ||
| 3. | 145-5307 | [1] | PLATE | |
| 4. | 180-5098 | [1] | INSULATION | |
| 5. | 190-4705 | [1] | LINER AS-CAB | |
| 4E-8293 | [6] | FASTENER | ||
| 6. | 190-4706 | [1] | COVER AS (RH) | |
| 7. | 190-4707 | [1] | COVER AS (LH) | |
| 8. | 190-4708 | [1] | COVER AS | |
| 9. | 6V-8490 M | [4] | BOLT (M6X1X25-MM) | |
| 10. | 9X-2045 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
#SEBP37040439
236-7697: LINER GP-CAB
236-7697 LINER GP-CAB -LOWER
S/N EWF1-UP
PART OF 228-5886, 229-9952, 230-9148 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N EWF1-UP
PART OF 228-5886, 229-9952, 230-9148 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-9033 | [2] | PLUG | |
| 2. | 8T-3995 | [3] | NUT (M6X1-THD) | |
| 3. | 111-7881 | [1] | COVER AS | |
| 4. | 127-6510 | [2] | COVER | |
| 5. | 141-4984 | [1] | INSULATION AS | |
| 6. | 154-4370 | [1] | FLOOR MAT | |
| 7. | 236-6581 | [1] | BRACKET AS | |
| 8. | 236-7696 | [1] | BOX AS | |
| 9. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 10. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 12. | 9X-2038 | [1] | WASHER (7X19X2-MM THK) | |
| 13. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 15. | 127-2170 M | [1] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 16. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| M | METRIC PART | |||
Information:
OPERATOR STATION
HEATER GP
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
