AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-1700 CONSOLE GP-OPERATOR -RH S/N CBD1-UP; MFG1-6000 PART OF 204-4161, 204-4162, 228-4602, 291-9193, 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 292-9690, 292-9691 CANOPY AR-OPEN ROPS AN ATTACHMENT 416E


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC

BACKHOE LOADER 416E BACKHOE LOADER CBD
 416E Backhoe Loader Single Tilt Center Pivot CBD00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3706 416E CBD   (2006)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
290-6737 WIRING GP-CONSOLE
WIRING GP-CONSOLE
331-5600 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
206-1700 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
368-9044 CONSOLE GP-OPERATOR
 

#SEBP37060930
 

206-1700: CONSOLE GP-OPERATOR

206-1700 CONSOLE GP-OPERATOR -RH
S/N CBD1-UP; MFG1-6000
PART OF 204-4161, 204-4162, 228-4602, 291-9193, 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 292-9690, 292-9691 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02495279 SEBP3706
2061700 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1679 [1] PANEL AS (UPPER)  
  206-1667 [2] CLIP (TRIM)  
6. 206-1681 [1] PANEL AS (LOWER)  
  172-8591 M [5] NUT-CLIP (M6X1-THD)  
7. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [1] CLIP (TRIM)  
8. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
9. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
10. 206-1690 [1] COVER (FENDER, REAR)  
11. 206-1692 [1] COVER AS (CONTROLS, REAR)  
  206-1667 [3] CLIP (TRIM)  
12. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
13. 248-2709 B [2] PLUG  
14. 9X-2038 [5] WASHER (7X19X2-MM THK)  
15. 206-1687 [1] COVER-FUSE  
16. 261-9634 E SEAL-BULK (78-CM)  
17. 261-9634 E SEAL-BULK (73-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37060931
 

206-1702: CONSOLE GP-OPERATOR

206-1702 CONSOLE GP-OPERATOR -LH
S/N CBD1-UP; MFG1-UP
PART OF 204-4162, 228-4602, 291-9194, 291-9195, 396-9160, 396-9161 CAB AR-ENCLOSED ROPS, 204-4164, 292-9690, 396-9158, 433-6915, 433-6916 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02495439 SEBP3706
2061702 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (33-CM)  
2. 5P-5927 D SEAL (1.7-M)  
3. 293-1980 E SEAL (71.2-CM)  
3A. 293-1980 E SEAL (77.4-CM)  
4. 206-1696 [1] CONSOLE AS  
5. 206-1698 [1] DOOR-STORAGE  
6. 206-1699 [1] CUP HOLDER (REAR)  
7. 206-1706 [1] BOX AS-STORAGE  
8. 206-1708 J [1] LOCK AS  
9. 206-1712 [1] HINGE-DOOR  
10. 210-6491 [1] CUP HOLDER (FRONT)  
11. 249-2482 [1] PLATE  
12. 261-9636 [1] BRACKET-SUPPORT  
13. 261-9637 [2] BRACKET AS  
14. 261-9639 [3] SCREW-PAN HEAD (12.0X0.5-IN)  
15. 5C-2890 M [3] NUT (M6X1-THD)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 9X-2038 [6] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [19] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP37060932
 

206-1703: CONSOLE GP-OPERATOR

206-1703 CONSOLE GP-OPERATOR -FRONT
S/N CBD1-UP; MFG1-UP
PART OF 204-4161, 204-4162, 228-4602, 291-9193, 291-9194, 291-9195, 396-9159, 396-9160, 396-9161 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 292-9690, 292-9691, 396-9157, 396-9158, 433-6915, 433-6916 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02495280 SEBP3706
2061703 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-1057 B [1] PLUG  
2. 206-1658 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
3. 206-1659 [1] DOOR-STORAGE  
4. 206-1660 [1] COVER AS-STEERING COLUMN (FRONT)  
5. 206-1661 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
6. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
7. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
8. 206-1708 J [1] LOCK AS  
9. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
10. 220-0738 E SEAL (22-CM)  
11. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
  206-1667 [2] CLIP (TRIM)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
12. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
13. 233-5260 [2] LANYARD  
14. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
15. 206-1854 [1] HINGE  
16. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
17. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
18. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 258-2354 [1] BRACKET-LATCH  
20. 9X-2038 [3] WASHER (7X19X2-MM THK)  
21. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
22. 5P-7070 D INSULATION-STRIP (0.03-M EACH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP37060933
 

368-9044: CONSOLE GP-OPERATOR

368-9044 CONSOLE GP-OPERATOR -RH
S/N CBD9794-UP; MFG1-UP
PART OF 204-4161, 204-4162, 228-4602, 396-9159, 396-9160, 396-9161 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 396-9157, 396-9158, 433-6915, 433-6916 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04774655 SEBP3706
3689044 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1681 [1] PANEL AS (LOWER)  
  172-8591 M [5] NUT-CLIP (M6X1-THD)  
6. 206-1687 [1] COVER-FUSE  
7. 206-1690 [1] COVER (FENDER, REAR)  
8. 206-1692 [1] COVER AS (CONTROLS, REAR)  
  206-1667 [3] CLIP (TRIM)  
9. 248-2709 B [2] PLUG  
10. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
11. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [4] CLIP (TRIM)  
12. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
13. 293-1980 E SEAL (73-CM)  
13A. 293-1980 E SEAL (77.5-CM)  
14. 336-7533 [1] PANEL AS-GAUGE  
  206-1667 [2] CLIP (TRIM)  
15. 9X-2038 [5] WASHER (7X19X2-MM THK)  
16. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37060934
 

221-3002: CONTROL & MTG GP-STABILIZER

221-3002 CONTROL & MTG GP-STABILIZER
S/N CBD1-2593
PART OF 204-4161, 204-4162, 228-4602 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 292-9690, 292-9691 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02495314 SEBP3706
2213002 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6902 [1] CLIP  
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3006 Y [2] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
6. 229-5280 [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37060935
 

221-3002: CONTROL & MTG GP-STABILIZER

221-3002 CONTROL & MTG GP-STABILIZER
S/N CBD2594-UP; MFG1-6000
PART OF 204-4161, 204-4162, 228-4602, 291-9193, 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 292-9690, 292-9691 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
i02888469 SEBP3706
2213002 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6902 [1] CLIP  
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3006 Y [2] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
6. 296-7593 C [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 C [7] WASHER (6.6X12X2-MM THK)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
19. 129-3178 CM [3] LOCKNUT (M6X1-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37060936
 

221-3002: CONTROL & MTG GP-STABILIZER

221-3002 CONTROL & MTG GP-STABILIZER
S/N CBD2594-UP; MFG1-6000
PART OF 204-4161, 204-4162, 228-4602, 291-9195 CAB AR-ENCLOSED ROPS, 204-4160, 204-4164, 433-6915 CANOPY AR-OPEN ROPS
Type 2
AN ATTACHMENT
i04389420 SEBP3706
2213002 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6902 [1] CLIP  
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3006 Y [2] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
6. 229-5280 C [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 C [4] WASHER (6.6X12X2-MM THK)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37060937
 

353-1395: CONTROL & MTG GP-STABILIZER

353-1395 CONTROL & MTG GP-STABILIZER
S/N MFG6001-UP
PART OF 433-6916 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04951790 SEBP3706
3531395 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 9R-8165 [1] BEARING  
3. 164-1395 [1] KNOB  
4. 183-6084 [1] BEARING  
5. 206-1874 [1] LEVER AS  
6. 221-3006 Y [1] CONTROL GP-HYDRAULIC HAND (STABILIZER)(RH)  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 356-4094 [1] PLATE AS  
12. 365-8191 Y [1] CONTROL GP-HYDRAULIC HAND (STABILIZER)(LH)  
13. 365-8207 [2] PLATE AS  
14. 366-4351 [2] BRACKET AS  
15. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 6E-5431 B [1] SHIM (0.5-MM THK)  
17. 7X-0465 M [3] BOLT (M6X1X100-MM)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
19. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-6902 [1] CLIP  
22. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
23. 9R-2806 [4] PIN  
24. 9R-2807 [4] CLIP (RETAINER)  
25. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
26. 251-5628 [1] FILM-IDENTIFICATION (STABILIZER CONTROL)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37060938
 

206-1645: CONTROL GP-HYDRAULIC HAND

206-1645 CONTROL GP-HYDRAULIC HAND -LOADER
S/N CBD1-UP; MFG1-6000
SINGLE TILT
PART OF 209-9943 VALVE AR-BANK 2
AN ATTACHMENT
i02496186 SEBP3706
2061645 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 9R-1765 [1] COVER-TOP  
6. 9R-1766 [1] COVER-BOTTOM  
7. 9R-1767 [1] BOOT  
8. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  5P-5677 D WIRE (18-GA, BLACK)(2-M)  
9. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
10. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
11. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
12. 164-1368 [12] FASTENER (CLIP)  
13. 183-3135 [1] JOINT AS  
13A. 183-3136 [1] BUSHING  
14. 183-3137 [1] PIN  
15. 206-1695 [1] BOOT  
16. 209-3363 [1] ROD  
17. 216-3351 [1] ROD  
18. 216-3358 [1] DAMPER AS (SPRING)  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
19. 291-5108 [1] GASKET  
20. 220-0269 [1] SHAFT  
21. 230-2510 [1] LEVER AS  
21A. 183-3134 [2] BEARING  
22. 269-8129 [1] BRACKET AS  
23. 269-8817 [1] PLATE  
24. 270-2795 [1] PLATE  
25. 272-7104 [1] ROD  
27. 179-8235 [1] LOCK PIN  
28. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
29. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
30. 7X-7729 [4] WASHER (11X25X3-MM THK)  
31. 8C-4987 [1] PIN-CLEVIS  
32. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [6] NUT (M10X1.5-THD)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
38. 8T-4773 [2] BALL JOINT  
39. 8T-4815 [2] ROD END  
40. 8T-9501 [2] SCREW (10-16X0.75-IN)  
41. 9R-2807 [1] CLIP (RETAINER)  
42. 9R-3067 [1] PIN  
43. 3E-6600 E SEAL (7-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37060939
 

209-3364: CONTROL GP-HYDRAULIC HAND

209-3364 CONTROL GP-HYDRAULIC HAND -LOADER
S/N CBD1-UP; MFG1-6000
PART OF 209-9944, 317-1463 VALVE AR-BANK 3
AN ATTACHMENT
i02496187 SEBP3706
2093364 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [10] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [4] RING-RETAINING  
3. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 9R-1765 [1] COVER-TOP  
6. 9R-1766 [1] COVER-BOTTOM  
7. 9R-1767 [1] BOOT  
8. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
9. 9X-2065 M [3] NUT (M10X1.5-THD, LH)  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 134-0453 M [3] TURNBUCKLE (M10X1.5X50-MM)  
12. 164-1368 [12] FASTENER (CLIP)  
13. 183-3135 [1] JOINT AS  
13A. 183-3136 [1] BUSHING  
14. 183-3137 [1] PIN  
15. 206-1668 [1] BOOT  
16. 209-3363 [1] ROD  
17. 216-3350 [1] ROD  
18. 216-3351 [1] ROD  
19. 216-3358 [1] DAMPER AS (SPRING)  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
20. 291-5108 [1] GASKET  
21. 220-0269 [1] SHAFT  
22. 220-3251 [1] ROD  
23. 230-2510 [1] LEVER AS  
23A. 183-3134 [2] BEARING  
24. 230-3038 [1] LEVER AS  
24A. 183-3136 [1] BUSHING  
25. 269-8129 [1] BRACKET AS  
26. 269-8817 [1] PLATE  
27. 270-2795 [1] PLATE  
28. 272-7104 [1] ROD  
30. 164-1395 [1] KNOB  
31. 179-8235 [2] LOCK PIN  
32. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
34. 7X-7729 [4] WASHER (11X25X3-MM THK)  
35. 8C-4987 [2] PIN-CLEVIS  
36. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [9] NUT (M10X1.5-THD)  
38. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
39. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4773 [3] BALL JOINT  
43. 8T-4815 [3] ROD END  
44. 8T-9501 [2] SCREW (10-16X0.75-IN)  
45. 9R-2807 [1] CLIP (RETAINER)  
46. 9R-3067 [1] PIN  
47. 3E-6600 E SEAL (7-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 416E :

CONDENSER & MTG GP-REFRIGERANT
301-9725 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
211-0705 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-1055 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
214-4302 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
248-5025 COMPRESSOR & MTG GP-REFRIG
COMPRESSOR & MTG GP-REFRIG
248-5025 COMPRESSOR & MTG GP-REFRIG
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
368-9044 CONSOLE GP-OPERATOR
CONTROL & MTG GP-STABILIZER
221-3002 CONTROL & MTG GP-STABILIZER
CONTROL & MTG GP-STABILIZER
221-3002 CONTROL & MTG GP-STABILIZER
CONTROL & MTG GP-STABILIZER
221-3002 CONTROL & MTG GP-STABILIZER
CONTROL & MTG GP-STABILIZER
353-1395 CONTROL & MTG GP-STABILIZER
CONTROL GP-HYDRAULIC HAND
206-1645 CONTROL GP-HYDRAULIC HAND

Truck sale:

Caterpillar 416EOEM, Construction
43,300 
Caterpillar 416EOEM, Construction
- backhoe loader
EMPIRE MACHINERY
Caterpillar 18 BUCKET FOR 416E, Construction
525 
Caterpillar 18 BUCKET FOR 416E, Construction
- bucket
KELLY TRACTOR CO.
Caterpillar 416 E, Construction
80,500 
Caterpillar 416 E, Construction
- backhoe loader
MILTON CAT
CATERPILLAR 416E 2012
 
CATERPILLAR 416E 2012
- BACKHOE LOADERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR 416E 2006
 
CATERPILLAR 416E 2006
- BACKHOE LOADERS
PETERSON TRACTOR CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.