OPERATOR STATION
CONTROL GP-HYDRAULICOPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP37060940
209-3370: CONTROL GP-HYDRAULIC HAND
209-3370 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N CBD1-3839
STANDARD
AN ATTACHMENT
S/N CBD1-3839
STANDARD
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-1361 | [2] | BOOT | |
| 2. | 164-1371 | [2] | PLATE | |
| 3. | 164-1399 | [2] | KNOB | |
| 4. | 164-1409 | [1] | LEVER AS (RH) | |
| 164-1436 | [1] | BEARING | ||
| 5. | 164-1411 | [1] | LEVER AS (LH) | |
| 164-1436 | [1] | BEARING | ||
| 6. | 164-1435 | [2] | PLATE | |
| 7. | 170-6312 | [4] | BEARING | |
| 8. | 190-5130 | [1] | FILM-INSTRUCTION (BACKHOE) | |
| 9. | 206-1672 | [1] | CONSOLE | |
| 10. | 206-1673 | [1] | CONSOLE AS | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 11. | 209-3348 | [4] | ROD | |
| 12. | 209-3353 | [1] | TOWER AS | |
| 13. | 209-3368 | [1] | GASKET | |
| 14. | 164-1402 | [2] | SLEEVE | |
| 15. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 16. | 179-8235 | [4] | LOCK PIN | |
| 17. | 6V-7744 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 18. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 19. | 8C-4987 | [4] | PIN-CLEVIS | |
| 20. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 22. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 23. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 24. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 25. | 8T-4773 | [4] | BALL JOINT | |
| 26. | 8T-4815 | [4] | ROD END | |
| 27. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 28. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 29. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 30. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 31. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP37060941
209-3370: CONTROL GP-HYDRAULIC HAND
209-3370 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N CBD1-UP; MFG1-6000
STANDARD
PART OF 374-3521, 374-3529, 374-6535, 374-6536 DISTRIBUTION AR
AN ATTACHMENT
S/N CBD1-UP; MFG1-6000
STANDARD
PART OF 374-3521, 374-3529, 374-6535, 374-6536 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-1361 | [2] | BOOT | |
| 2. | 164-1371 | [2] | PLATE | |
| 3. | 164-1399 | [2] | KNOB | |
| 4. | 164-1409 | [1] | LEVER AS (RH) | |
| 164-1436 | [1] | BEARING | ||
| 5. | 164-1411 | [1] | LEVER AS (LH) | |
| 164-1436 | [1] | BEARING | ||
| 6. | 164-1435 | [2] | PLATE | |
| 7. | 170-6312 | [4] | BEARING | |
| 8. | 190-5130 | [1] | FILM-INSTRUCTION (BACKHOE) | |
| 9. | 206-1672 | [1] | CONSOLE | |
| 10. | 206-1673 | [1] | CONSOLE AS | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 11. | 303-9307 C | [4] | ROD | |
| 12. | 209-3353 | [1] | TOWER AS | |
| 13. | 209-3368 | [1] | GASKET | |
| 14. | 164-1402 | [2] | SLEEVE | |
| 15. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 16. | 179-8235 | [4] | LOCK PIN | |
| 17. | 6V-7744 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 18. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 19. | 8C-4987 | [4] | PIN-CLEVIS | |
| 20. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 22. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 23. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 24. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 25. | 8T-4773 | [4] | BALL JOINT | |
| 26. | 8T-4815 | [4] | ROD END | |
| 27. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 28. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 29. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 30. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 31. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP37060942
209-3371: CONTROL GP-HYDRAULIC HAND
209-3371 CONTROL GP-HYDRAULIC HAND -4-FUNCTION, EXCAVATOR
S/N CBD1-3839
AN ATTACHMENT
S/N CBD1-3839
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-7405 | [2] | COLLAR | |
| 2. | 164-1361 | [2] | BOOT | |
| 3. | 164-1371 | [2] | PLATE | |
| 4. | 164-1399 | [2] | KNOB | |
| 5. | 164-1409 | [1] | LEVER AS (RH) | |
| 164-1436 | [1] | BEARING | ||
| 6. | 164-1411 | [1] | LEVER AS (LH) | |
| 164-1436 | [1] | BEARING | ||
| 7. | 164-1421 | [1] | PLATE | |
| 8. | 164-1422 | [1] | SHAFT AS | |
| 9. | 164-1425 | [1] | COUPLER AS | |
| 10. | 164-1429 | [1] | COUPLER AS | |
| 11. | 164-1435 | [2] | PLATE | |
| 12. | 164-1438 | [2] | ROD | |
| 13. | 170-6312 | [4] | BEARING | |
| 14. | 190-5128 | [1] | FILM-INSTRUCTION (EXCAVATOR CONTROL) | |
| 15. | 206-1672 | [1] | CONSOLE (REAR) | |
| 16. | 206-1673 | [1] | CONSOLE AS (REAR) | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 17. | 209-3349 | [2] | ROD | |
| 18. | 209-3350 | [2] | ROD | |
| 19. | 209-3353 | [1] | TOWER AS | |
| 20. | 231-2878 | [1] | GASKET | |
| 21. | 164-1402 | [2] | SLEEVE | |
| 22. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 23. | 6V-7744 M | [14] | LOCKNUT (M10X1.5-THD) | |
| 24. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 25. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 28. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 30. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 31. | 8T-4773 | [10] | BALL JOINT | |
| 32. | 8T-4815 | [2] | ROD END | |
| 33. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 34. | 9R-2806 | [2] | PIN | |
| 35. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 36. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 37. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 38. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 39. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP37060943
209-3371: CONTROL GP-HYDRAULIC HAND
209-3371 CONTROL GP-HYDRAULIC HAND -4-FUNCTION, EXCAVATOR
S/N CBD1-UP; MFG1-6000
PART OF 356-0067, 356-0068, 356-0069, 374-3517, 374-3518, 374-3519, 374-6532, 374-6533, 374-6534 DISTRIBUTION AR
AN ATTACHMENT
S/N CBD1-UP; MFG1-6000
PART OF 356-0067, 356-0068, 356-0069, 374-3517, 374-3518, 374-3519, 374-6532, 374-6533, 374-6534 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-7405 | [2] | COLLAR | |
| 2. | 164-1361 | [2] | BOOT | |
| 3. | 164-1371 | [2] | PLATE | |
| 4. | 164-1399 | [2] | KNOB | |
| 5. | 164-1409 | [1] | LEVER AS (RH) | |
| 164-1436 | [1] | BEARING | ||
| 6. | 164-1411 | [1] | LEVER AS (LH) | |
| 164-1436 | [1] | BEARING | ||
| 7. | 164-1421 | [1] | PLATE | |
| 8. | 164-1422 | [1] | SHAFT AS | |
| 9. | 164-1425 | [1] | COUPLER AS | |
| 10. | 164-1429 | [1] | COUPLER AS | |
| 11. | 164-1435 | [2] | PLATE | |
| 12. | 164-1438 | [2] | ROD | |
| 13. | 170-6312 | [4] | BEARING | |
| 14. | 190-5128 | [1] | FILM-INSTRUCTION (EXCAVATOR CONTROL) | |
| 15. | 206-1672 | [1] | CONSOLE (REAR) | |
| 16. | 206-1673 | [1] | CONSOLE AS (REAR) | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 17. | 303-9308 C | [2] | ROD | |
| 18. | 303-9309 C | [2] | ROD | |
| 19. | 209-3353 | [1] | TOWER AS | |
| 20. | 231-2878 | [1] | GASKET | |
| 21. | 164-1402 | [2] | SLEEVE | |
| 22. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 23. | 6V-7744 M | [14] | LOCKNUT (M10X1.5-THD) | |
| 24. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 25. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 28. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 30. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 31. | 8T-4773 | [10] | BALL JOINT | |
| 32. | 8T-4815 | [2] | ROD END | |
| 33. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 34. | 9R-2806 | [2] | PIN | |
| 35. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 36. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 37. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 38. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 39. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP37060944
221-3006: CONTROL GP-HYDRAULIC HAND
221-3006 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N CBD1-UP; MFG1-UP
PART OF 221-3002, 353-1395 CONTROL & MTG GP-STABILIZER, 434-3252 CONTROL GP-STABILIZER
AN ATTACHMENT
S/N CBD1-UP; MFG1-UP
PART OF 221-3002, 353-1395 CONTROL & MTG GP-STABILIZER, 434-3252 CONTROL GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37060945
312-8852: CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [10] | BALL JOINT | |
| 2. | 142-7405 | [2] | COLLAR | |
| 3. | 164-1361 | [2] | BOOT | |
| 4. | 164-1371 | [2] | PLATE | |
| 5. | 164-1399 | [2] | KNOB | |
| 6. | 164-1409 | [1] | LEVER AS (RH) | |
| 6A. | 164-1436 | [1] | BEARING | |
| 7. | 164-1411 | [1] | LEVER AS (LH) | |
| 7A. | 164-1436 | [1] | BEARING | |
| 8. | 164-1421 | [1] | PLATE | |
| 9. | 164-1422 | [1] | SHAFT AS | |
| 10. | 164-1425 | [1] | COUPLER AS | |
| 10A. | 164-1415 | [2] | BEARING | |
| 11. | 164-1429 | [1] | COUPLER AS | |
| 164-1425 | [1] | COUPLER AS | ||
| 11A. | 164-1415 | [2] | BEARING | |
| 12. | 164-1435 | [2] | PLATE | |
| 13. | 164-1438 | [2] | ROD | |
| 14. | 170-6312 | [4] | BEARING | |
| 15. | 206-1672 | [1] | CONSOLE | |
| 16. | 206-1673 | [1] | CONSOLE AS | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 17. | 209-3353 | [1] | TOWER AS | |
| 18. | 231-2878 | [1] | GASKET | |
| 19. | 303-9308 | [2] | ROD | |
| 20. | 303-9309 | [2] | ROD | |
| 21. | 164-1402 | [2] | SLEEVE | |
| 22. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 23. | 300-9451 | [1] | FILM-IDENTIFICATION | |
| 24. | 6V-7744 M | [14] | LOCKNUT (M10X1.5-THD) | |
| 25. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 26. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 29. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 30. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 31. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 32. | 8T-4815 | [2] | ROD END | |
| 33. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 34. | 9R-2806 | [2] | PIN | |
| 35. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 36. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 37. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 38. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 39. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP37060946
331-4358: CONTROL GP-HYDRAULIC HAND
331-4358 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N MFG6001-UP
PART OF 396-9147 VALVE AR-BANK 3
Type 1
AN ATTACHMENT
S/N MFG6001-UP
PART OF 396-9147 VALVE AR-BANK 3
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [6] | RING-RETAINING | |
| 3. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INLCUDES RECPTACLE AS & WEDGE) | ||||
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [3] | PIN | |
| 6. | 8T-4773 | [5] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(2-M) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 11. | 091-1745 | [7] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 134-0453 M | [1] | TURNBUCKLE (M10X1.5X50-MM) | |
| 15. | 164-1368 | [12] | FASTENER (CLIP) | |
| 16. | 164-1395 | [1] | KNOB | |
| 17. | 206-1668 | [1] | BOOT | |
| 18. | 220-0269 | [1] | SHAFT | |
| 19. | 270-2795 | [1] | PLATE | |
| 20. | 291-5108 | [1] | GASKET | |
| 21. | 365-2913 | [1] | BRACKET AS | |
| 22. | 330-6987 | [1] | LEVER AS-VALVE | |
| 22A. | 183-3136 | [1] | BUSHING | |
| 23. | 330-6988 | [1] | PIN | |
| 24. | 352-8367 | [1] | PLATE | |
| 25. | 365-2915 | [1] | PIN AS | |
| [2] | LEVER | |||
| 26. | 330-6993 | [1] | ROD | |
| 27. | 330-6994 | [1] | ROD | |
| 28. | 330-6996 | [1] | ROD | |
| 29. | 330-7001 | [1] | DAMPER AS | |
| 30. | 330-7002 | [1] | LEVER AS-VALVE | |
| 30A. | 183-3134 | [2] | BEARING | |
| 31. | 352-8368 | [1] | PLATE AS | |
| 32. | 333-7905 | [1] | PIN | |
| 33. | 333-8324 | [1] | JOINT AS | |
| 33A. | 183-3136 | [1] | BUSHING | |
| 34. | 183-3134 | [2] | BEARING | |
| 36. | 5H-3193 | [1] | PIN-SPRING | |
| 37. | 6V-7744 M | [7] | LOCKNUT (M10X1.5-THD) | |
| 38. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 39. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 40. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4815 | [3] | ROD END | |
| 43. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 44. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 45. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 46. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 47. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| 48. | 251-5626 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37060947
331-4358: CONTROL GP-HYDRAULIC HAND
331-4358 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N MFG6001-UP
PART OF 396-9147 VALVE AR-BANK 3
Type 2
AN ATTACHMENT
S/N MFG6001-UP
PART OF 396-9147 VALVE AR-BANK 3
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [5] | RING-RETAINING | |
| 3. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [3] | PIN | |
| 6. | 8T-4773 | [5] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(1-M EACH) | |||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 091-1745 | [6] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 1D-5120 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 134-0453 M | [1] | TURNBUCKLE (M10X1.5X50-MM) | |
| 15. | 164-1368 | [12] | FASTENER (CLIP) | |
| 16. | 164-1395 | [1] | KNOB | |
| 17. | 206-1668 | [1] | BOOT | |
| 18. | 220-0269 | [1] | SHAFT | |
| 19. | 270-2795 | [1] | PLATE | |
| 20. | 291-5108 | [1] | GASKET | |
| 21. | 365-2913 C | [1] | BRACKET AS | |
| 22. | 330-6987 | [1] | LEVER AS-VALVE | |
| 22A. | 183-3136 | [1] | BUSHING | |
| 23. | 330-6988 | [1] | PIN | |
| 24. | 352-8367 | [1] | PLATE | |
| 25. | 365-2915 C | [1] | PIN AS | |
| 26. | 417-1528 | [1] | ROD | |
| 27. | 330-6994 | [1] | ROD | |
| 28. | 330-6996 | [1] | ROD | |
| 29. | 330-7001 | [1] | DAMPER AS | |
| 30. | 330-7002 | [1] | LEVER AS-VALVE | |
| 30A. | 183-3134 | [2] | BEARING | |
| 31. | 461-7985 | [1] | PLATE AS | |
| 32. | 399-7025 | [1] | PIN | |
| 33. | 333-8324 | [1] | JOINT AS | |
| 33A. | 183-3136 | [1] | BUSHING | |
| 34. | 183-3134 | [2] | BEARING | |
| 36. | 5H-3193 | [1] | PIN-SPRING | |
| 37. | 6V-7744 M | [7] | LOCKNUT (M10X1.5-THD) | |
| 38. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 39. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 40. | 8T-4133 M | [11] | NUT (M10X1.5-THD) | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4815 | [3] | ROD END | |
| 43. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 44. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 45. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 46. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 47. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| 48. | 251-5626 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | |
| 49. | 7X-0818 M | [1] | BOLT (M8X1.25X45-MM) | |
| 50. | 7X-0579 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37060948
334-3568: CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N MFG6001-UP
PART OF 396-9146 VALVE AR-BANK 2
Type 1
AN ATTACHMENT
S/N MFG6001-UP
PART OF 396-9146 VALVE AR-BANK 2
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [5] | RING-RETAINING | |
| 3. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [2] | PIN | |
| 6. | 8T-4773 | [4] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(2-M) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 091-1745 | [5] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 134-0453 M | [1] | TURNBUCKLE (M10X1.5X50-MM) | |
| 15. | 164-1368 | [12] | FASTENER (CLIP) | |
| 16. | 183-3134 | [2] | BEARING | |
| 17. | 206-1695 | [1] | BOOT | |
| 18. | 220-0269 | [1] | SHAFT | |
| 19. | 270-2795 | [1] | PLATE | |
| 20. | 291-5108 | [1] | GASKET | |
| 21. | 365-2913 | [1] | BRACKET AS | |
| 22. | 330-6988 | [1] | PIN | |
| 23. | 330-6993 | [1] | ROD | |
| 24. | 330-6996 | [1] | ROD | |
| 25. | 330-7001 | [1] | DAMPER AS | |
| 26. | 330-7002 | [1] | LEVER AS-VALVE | |
| 26A. | 183-3134 | [2] | BEARING | |
| 27. | 333-8324 | [1] | JOINT AS | |
| 27A. | 183-3136 | [1] | BUSHING | |
| 28. | 365-2915 | [1] | PIN AS | |
| 29. | 352-8367 | [1] | PLATE | |
| 30. | 352-8368 | [1] | PLATE AS | |
| 32. | 5H-3193 | [1] | PIN-SPRING | |
| 33. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 34. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 35. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 36. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 8T-4133 M | [7] | NUT (M10X1.5-THD) | |
| 38. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 39. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 40. | 8T-4815 | [2] | ROD END | |
| 41. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 42. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 43. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| 44. | 251-5625 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37060949
334-3568: CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N MFG6001-UP
PART OF 396-9146 VALVE AR-BANK 2
Type 2
AN ATTACHMENT
S/N MFG6001-UP
PART OF 396-9146 VALVE AR-BANK 2
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6600 E | SEAL (7-CM) | ||
| 2. | 2R-0364 | [5] | RING-RETAINING | |
| 3. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 8T-4743 | [2] | PIN | |
| 6. | 8T-4773 | [4] | BALL JOINT | |
| 7. | 9R-1765 | [1] | COVER-TOP | |
| 8. | 9R-1766 | [1] | COVER-BOTTOM | |
| 9. | 9R-1767 | [1] | BOOT | |
| 10. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 5P-5677 D | WIRE (18-GA, BLACK)(2-M) | |||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 091-1745 | [5] | WASHER (16.6X24X1.2-MM THK) | |
| 12. | 1D-5120 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 119-4167 | [1] | ROD | |
| 14. | 134-0453 M | [1] | TURNBUCKLE (M10X1.5X50-MM) | |
| 15. | 164-1368 | [12] | FASTENER (CLIP) | |
| 16. | 183-3134 | [2] | BEARING | |
| 17. | 206-1695 | [1] | BOOT | |
| 18. | 220-0269 | [1] | SHAFT | |
| 19. | 270-2795 | [1] | PLATE | |
| 20. | 291-5108 | [1] | GASKET | |
| 21. | 365-2913 | [1] | BRACKET AS | |
| 22. | 330-6988 | [1] | PIN | |
| 23. | 417-1528 | [1] | ROD | |
| 24. | 330-6996 | [1] | ROD | |
| 25. | 330-7001 | [1] | DAMPER AS | |
| 26. | 330-7002 | [1] | LEVER AS-VALVE | |
| 26A. | 183-3134 | [2] | BEARING | |
| 27. | 333-8324 | [1] | JOINT AS | |
| 27A. | 183-3136 | [1] | BUSHING | |
| 28. | 365-2915 | [1] | PIN AS | |
| 29. | 352-8367 | [1] | PLATE | |
| 30. | 461-7985 | [1] | PLATE AS | |
| 32. | 5H-3193 | [1] | PIN-SPRING | |
| 33. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 34. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 35. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 36. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 38. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 39. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 40. | 8T-4815 | [2] | ROD END | |
| 41. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 42. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 43. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| 44. | 251-5625 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
