AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

353-1387 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN S/N MFG6001-UP PART OF 423-2794 CONVERSION AR-MACHINE, 424-0084, 424-0085, 424-0086 DISTRIBUTION AR AN ATTACHMENT 416E


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-STABILIZER

BACKHOE LOADER 416E BACKHOE LOADER CBD
 416E Backhoe Loader Single Tilt Center Pivot CBD00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3706 416E CBD   (2006)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1387 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
365-8191 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
377-7360 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
377-7360 CONTROL GP-HYDRAULIC HAND
 

#SEBP37060950
 

353-1387: CONTROL GP-HYDRAULIC HAND

353-1387 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N MFG6001-UP
PART OF 423-2794 CONVERSION AR-MACHINE, 424-0084, 424-0085, 424-0086 DISTRIBUTION AR
AN ATTACHMENT
i05150099 SEBP3706
3531387 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [8] BALL JOINT  
2. 9R-9901 [6] FASTENER (CLIP)  
3. 142-7405 [2] COLLAR  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1421 [1] PLATE  
8. 164-1422 [1] SHAFT AS  
9. 164-1425 [1] COUPLER AS  
9A. 164-1415 [2] BEARING  
10. 164-1435 [2] PLATE  
11. 164-1438 [2] ROD  
12. 170-6312 [4] BEARING  
13. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
14. 206-1672 [1] CONSOLE (REAR)  
15. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
16. 231-2873 [1] LEVER AS (LH)  
16A. 164-1436 [1] BEARING  
17. 337-6245 [1] ROD  
18. 337-6246 [2] ROD  
19. 337-6247 [1] ROD  
20. 366-5054 [1] LEVER AS (RH)  
20A. 164-1436 [1] BEARING  
21. 366-5055 [1] COUPLER AS  
21A. 164-1415 [2] BEARING  
22. 366-5287 [1] TOWER AS  
23. 366-5619 [1] MAT  
24. 164-1402 [2] SLEEVE  
25. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
26. 6V-7744 M [12] LOCKNUT (M10X1.5-THD)  
27. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
28. 7X-7729 [8] WASHER (11X25X3-MM THK)  
29. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [16] NUT (M10X1.5-THD)  
31. 8T-4138 M [6] BOLT (M6X1X20-MM)  
32. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
33. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
34. 8T-4743 [4] PIN  
35. 8T-4815 [4] ROD END  
36. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
37. 9X-2038 [4] WASHER (7X19X2-MM THK)  
38. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP37060951
 

365-8191: CONTROL GP-HYDRAULIC HAND

365-8191 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N MFG1-UP
PART OF 353-1395 CONTROL & MTG GP-STABILIZER, 434-3252 CONTROL GP-STABILIZER
AN ATTACHMENT
i04951797 SEBP3706
3658191 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4592 [1] KNOB  
2. 228-4593 [1] BOOT-PROTECTION  
3. 228-4597 [1] CLIP  
4. 365-8190 [1] CABLE AS  
5. 5C-2890 M [1] NUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP37060952
 

377-7360: CONTROL GP-HYDRAULIC HAND

377-7360 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N MFG6001-12555
PART OF 424-0087, 424-0088 DISTRIBUTION AR
AN ATTACHMENT
i05153037 SEBP3706
3777360 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
8. 206-1672 [1] CONSOLE  
9. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
10. 338-3578 [2] ROD  
11. 344-5863 [1] SPACER (20X35X6-MM THK)  
12. 366-5045 [1] SUPPORT AS  
13. 366-5052 [1] ROD  
14. 366-5290 [1] TOWER AS  
15. 366-5453 [1] BRACKET AS  
16. 366-5461 [1] ROD  
17. 366-5618 [1] ROD  
18. 366-5620 [1] MAT  
19. 371-4326 [1] BRACKET AS  
20. 377-7361 [1] LEVER AS (RH)  
21. 377-7362 [1] LEVER AS (LH)  
22. 384-2809 [1] SHAFT AS  
23. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
24. 8T-0706 [1] RING-RETAINING  
25. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [12] NUT (M10X1.5-THD)  
27. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
28. 398-8245 [4] PIN  
29. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
31. 9X-2038 [4] WASHER (7X19X2-MM THK)  
32. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 399-2810 [4] CLIP  
  M   METRIC PART
 

#SEBP37060953
 

377-7360: CONTROL GP-HYDRAULIC HAND

377-7360 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N MFG12556-UP
PART OF 424-0087, 424-0088 DISTRIBUTION AR
AN ATTACHMENT
i06089598 SEBP3706
3777360 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
8. 206-1672 [1] CONSOLE  
9. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
10. 338-3578 [2] ROD  
11. 344-5863 [1] SPACER (20X35X6-MM THK)  
12. 366-5045 [1] SUPPORT AS  
13. 366-5052 [1] ROD  
14. 366-5290 [1] TOWER AS  
15. 458-2386 C [1] BRACKET AS (LH)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
16. 366-5461 [1] ROD  
17. 366-5618 [1] ROD  
18. 366-5620 [1] MAT  
19. 458-2387 C [1] BRACKET AS (RH)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
20. 377-7361 [1] LEVER AS (RH)  
21. 377-7362 [1] LEVER AS (LH)  
22. 384-2809 [1] SHAFT AS  
23. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
24. 8T-0706 [1] RING-RETAINING  
25. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [12] NUT (M10X1.5-THD)  
27. 8T-4195 CM [5] BOLT (M10X1.5X30-MM)  
28. 398-8245 [4] PIN  
29. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-4908 CM [4] BOLT (M8X1.25X25-MM)  
31. 9X-2038 [4] WASHER (7X19X2-MM THK)  
32. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 399-2810 [4] CLIP  
34. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
35. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37060954
 

209-3365: CONTROL GP-HYDRAULIC PEDAL

209-3365 CONTROL GP-HYDRAULIC PEDAL -SINGLE FUNCTION, LH
S/N CBD1-3839
PART OF 212-0206 VALVE AR-BANK 8
AN ATTACHMENT
i02355555 SEBP3706
2093365 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [1] ROD END (YOKE)  
2. 8T-6431 [1] ROD END (BEARING)  
3. 164-1547 [1] SHAFT AS  
4. 179-8235 [1] LOCK PIN  
5. 209-3352 [1] ROD  
6. 231-2877 [1] PEDAL AS (LH)  
7. 232-1536 [1] SUPPORT AS  
8. 232-1540 [1] SEAL  
9. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
10. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
13. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [4] NUT (M10X1.5-THD)  
15. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
16. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
17. 198-0098 [1] FILM-INSTRUCTION (AUXILIARY)  
  M   METRIC PART
 

#SEBP37060955
 

209-3365: CONTROL GP-HYDRAULIC PEDAL

209-3365 CONTROL GP-HYDRAULIC PEDAL -SINGLE FUNCTION, LH
S/N CBD3840-UP; MFG1-6000
PART OF 212-0206 VALVE AR-BANK 8
AN ATTACHMENT
i03247321 SEBP3706
2093365 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [1] ROD END (YOKE)  
2. 8T-6431 [1] ROD END (BEARING)  
3. 164-1547 [1] SHAFT AS  
4. 179-8235 [1] LOCK PIN  
5. 303-9310 C [1] ROD  
6. 231-2877 [1] PEDAL AS (LH)  
7. 232-1536 [1] SUPPORT AS  
8. 232-1540 [1] SEAL  
9. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
10. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
13. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [4] NUT (M10X1.5-THD)  
15. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
16. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
17. 198-0098 [1] FILM-INSTRUCTION (AUXILIARY)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37060956
 

209-3375: CONTROL GP-HYDRAULIC PEDAL

209-3375 CONTROL GP-HYDRAULIC PEDAL -SINGLE FUNCTION, RH
S/N CBD1-3839
PART OF 209-9935 VALVE AR-BANK 7, 212-0206 VALVE AR-BANK 8
AN ATTACHMENT
i02333606 SEBP3706
2093375 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [1] ROD END  
2. 8T-6431 [1] ROD END  
3. 133-8916 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
4. 164-1547 [1] SHAFT AS  
5. 179-8235 [1] LOCK PIN  
6. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
7. 209-3352 [1] ROD  
8. 231-2875 [1] SUPPORT AS (RH)(RH)  
9. 231-2876 [1] PEDAL AS (RH)  
10. 232-1540 [1] SEAL  
11. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
12. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 8C-4987 [1] PIN-CLEVIS  
14. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [2] NUT (M10X1.5-THD)  
17. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
18. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37060957
 

209-3375: CONTROL GP-HYDRAULIC PEDAL

209-3375 CONTROL GP-HYDRAULIC PEDAL -SINGLE FUNCTION, RH
S/N CBD3840-UP; MFG1-6000
PART OF 209-9935 VALVE AR-BANK 7, 212-0206 VALVE AR-BANK 8
AN ATTACHMENT
i03247349 SEBP3706
2093375 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [1] ROD END  
2. 8T-6431 [1] ROD END  
3. 133-8916 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
4. 164-1547 [1] SHAFT AS  
5. 179-8235 [1] LOCK PIN  
6. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
7. 303-9310 C [1] ROD  
8. 231-2875 [1] SUPPORT AS (RH)(RH)  
9. 231-2876 [1] PEDAL AS (RH)  
10. 232-1540 [1] SEAL  
11. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
12. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 8C-4987 [1] PIN-CLEVIS  
14. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [2] NUT (M10X1.5-THD)  
17. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
18. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37060958
 

353-1388: CONTROL GP-HYDRAULIC PEDAL

353-1388 CONTROL GP-HYDRAULIC PEDAL -AUXILIARY, EXTENDABLE STICK
S/N MFG6001-UP
PART OF 398-5032 KIT-AUXILIARY LINES, 396-9142 VALVE AR-BANK 7, 396-9144 VALVE AR-BANK 8
AN ATTACHMENT
i04947165 SEBP3706
3531388 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [2] BALL JOINT  
2. 8T-6431 [2] ROD END  
3. 133-8916 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
4. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
5. 398-8245 [1] PIN  
6. 231-2875 [1] SUPPORT AS (RH)  
7. 231-2876 [1] PEDAL AS (RH)  
8. 232-1540 [1] SEAL  
9. 353-3433 [1] SHAFT AS  
10. 366-5457 [1] PLATE AS  
11. 366-5460 [1] ROD  
12. 366-5461 [1] ROD  
13. 389-2016 [1] PLATE AS  
14. 036-4453 [2] RING-RETAINING  
15. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
16. 161-7632 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
17. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
18. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [6] NUT (M10X1.5-THD)  
20. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
22. 399-2810 [1] CLIP  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37060959
 

434-3252: CONTROL GP-STABILIZER

434-3252 CONTROL GP-STABILIZER
S/N MFG6001-UP
PART OF 396-9159, 396-9160, 396-9161 CAB AR-ENCLOSED ROPS, 396-9157, 396-9158 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i05269761 SEBP3706
4343252 CONTROL GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 9R-8165 [1] BEARING  
3. 164-1395 [1] KNOB  
4. 183-6084 [1] BEARING  
5. 206-1874 [1] LEVER AS  
6. 221-3006 Y [1] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
7. 229-5280 [1] PLATE AS  
8. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
9. 232-1542 [1] SEAL  
10. 248-2708 [1] GROMMET  
11. 248-2710 [1] GROMMET  
12. 251-5628 [1] FILM-IDENTIFICATION (STABILIZER CONTROL)  
13. 365-8191 Y [1] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
14. 365-8207 [2] PLATE AS  
15. 366-4351 [2] BRACKET AS  
16. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6E-5431 B [1] SHIM (0.5-MM THK)  
18. 7X-0465 M [3] BOLT (M6X1X100-MM)  
19. 8T-4138 M [1] BOLT (M6X1X20-MM)  
20. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
21. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-6902 [1] CLIP  
23. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
24. 9R-2806 [4] PIN  
25. 9R-2807 [4] CLIP (RETAINER)  
26. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 416E :

CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
331-4358 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
331-4358 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
312-8852 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
221-3006 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3371 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3371 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
365-8191 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
377-7360 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
377-7360 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
209-3365 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
209-3365 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
209-3375 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
209-3375 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
353-1388 CONTROL GP-HYDRAULIC PEDAL

Truck sale:

Caterpillar 416EOEM, Construction
43,300 
Caterpillar 416EOEM, Construction
- backhoe loader
EMPIRE MACHINERY
Caterpillar 18 BUCKET FOR 416E, Construction
525 
Caterpillar 18 BUCKET FOR 416E, Construction
- bucket
KELLY TRACTOR CO.
Caterpillar 416 E, Construction
80,500 
Caterpillar 416 E, Construction
- backhoe loader
MILTON CAT
CATERPILLAR 416E 2012
 
CATERPILLAR 416E 2012
- BACKHOE LOADERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR 416E 2006
 
CATERPILLAR 416E 2006
- BACKHOE LOADERS
PETERSON TRACTOR CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.