SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSOPERATOR STATION
CONSOLE GPWORK TOOLS
BUCKET GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
#SEBP37061060
248-5712: PLATE & FILM GP
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (MACHINE MAIN FRAME) | ||||
| 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | ||
| (ON SERVICE PLATE ON MAIN FRAME) | ||||
| 193-5913 B | [2] | PLUG | ||
| (PLUG UNUSED VISIBLE TAPPED HOLES) | ||||
| 193-5914 B | [16] | PLUG | ||
| (PLUG UNUSED VISIBLE TAPPED HOLES) | ||||
| 193-5915 B | [6] | PLUG | ||
| (PLUG UNUSED VISIBLE TAPPED HOLES) | ||||
| 193-5916 B | [4] | PLUG | ||
| (PLUG UNUSED VISIBLE TAPPED HOLES) | ||||
| [1] | FILM-INSTRUCTION (BOOM LOCK) | |||
| (NEXT TO BOOM LOCK ON RH CONSOLE) | ||||
| [1] | FILM-INSTRUCTION (VARIABLE SPEED) | |||
| (ON RH CONSOLE NEXT TO GOVERNOR CONTROL HANDLE) | ||||
| 258-9999 | [4] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | ||
| (APPLY A TOTAL OF 4 FILMS. THE FIRST 2 FILMS MUST BE APPLIED TO THE FRONT SIDE OF THE FRONT AXLE BETWEEN THE CHASSIS | ||||
| & WHEEL ASSEMBLY ON THE LH & RH SIDE OF THE MACHINE. THE LAST W FILMS MUST BE APPLIED TO THE STAB PAD CENTERED UNDER | ||||
| THE LIFTING HOLE ORIENTED WITH THE ARROW POINTING UP WHEN THE STABILIZER IS IN UPWARD POSITION) | ||||
| 252-2157 | [4] | FILM-INFORMATION (TIE-DOWN) | ||
| (APPLY 2 FILMS, ONE ON EACH SIDE OF THE MACHINE IN FRONT OF THE MAIN FRAME ABOVE THE FRONT AXLE ABOVE THE TIE DOWN | ||||
| (MOUNTING PLATE. APPLY THE OTHER 2 FILMS ON THE REAR OF THE MACHINE ON THE MAIN FRAME NEXT TO THE TIE DOWN HOLES UNDER | ||||
| THE SWING) | ||||
| 337-5351 | [1] | FILM-INSTRUCTION (START SWITCH) | ||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| 289-3412 | [1] | FILM-COVER (PROTECT)(BATTERY BOX) | ||
| (PLACE FILM INSIDE BATTERY BOX ON THE LEFT SIDE 150 +/- 5-MM UP FROM THE BOTTOM OF THE BOX) | ||||
| 231-9361 | [1] | FILM-IDENTIFICATION (FUSE, RELAY) | ||
| (UNDER RH CONSOLE COVER THAT COVERS THE POWER DISTRIBUTION BLOCK. ORIENT FILM SUCH THAT IT | ||||
| (CAN BE READ WHEN THE COVER IS OPEN & THE BLOCK IS EXPOSED) | ||||
| 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | ||
| (INSIDE BATTERY BOX DOOR CENTERED FROM SIDE TO SIDE ABOVE THE JUMP START WARNING FILM & CENTERED FROM TOP TO BOTTOM | ||||
| (BETWEEN THE JUMP START FILM & BEND IN THE DOOR) | ||||
| [1] | FILM-IDENTIFICATION (LUBRICATION POINTS) | |||
| (UNDER THE HOOD ON PRE-CLEANER, REMOVE SUPPPLIER FILM & ORIENT FILM SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF THE | ||||
| (MACHINE) | ||||
| [1] | FILM-IDENTIFICATION (FUSE PANEL) | |||
| (INSIDE RH CONSOLE ACCESS PANEL. ORIENT FILM SUCH THAT IT CAN BE READ WHILE STANDING | ||||
| ON THE GROUND WITH THE ACCESS DOOR OPEN & VIEWING FILM) | ||||
| 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | ||
| (ON SHUNT TANK NEXT TO RADIATOR CAP ORIENTED SUCH THAT YOU CAN READ IT FROM MACHINE) | ||||
| 225-0041 | [1] | FILM-INFORMATION (ROPS, FOPS, READ OMM) | ||
| (ON THE LH A-POST 350+/-5-MM FROM THE FLOOR. THE UPPER FILM SHOULD BE THE NO WELD/NO DRILL | ||||
| (& THE ROPS/FOPS IN THE LOWER POSITION) | ||||
| 202-9824 | [1] | FILM-INFORMATION (BRAZIL) | ||
| (PLACE BRAZILIAN INFORMATION PLATE NEAR THE PIN PLATE) | ||||
| 124-2456 | [1] | FILM-INSTRUCTION (NO STEP) | ||
| (POSITION INSIDE BATTERY BOX DOOR 75 +/- 5-MM FROM THE RIGHT EDGE & THE TOP EDGE IS EVEN WITH THE 12 VOLT FILM) | ||||
| 219-0302 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| (ON THE LH A-POST 350 +/- 5-MM FROM THE FLOOR. THE UPPER FILM SHOULD BE THE | ||||
| (NO WELD/NO DRILL & THE ROPS/FOPS IN THE LOWER POSITION) | ||||
| 225-0312 | [1] | FILM-WARNING (JUMP START, READ OMM, INTL) | ||
| (INSIDE OF BATTERY BOX DOOR CENTERED ABOVE DOOR LATCH & 75 +/- 5-MM UP FROM THE EDGE OF DOOR) | ||||
| 226-1240 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL) | ||
| (ON BOOM 700-MM +/-5-MM UP FROM CENTER LINE OF SWING & BOOM LOWER FOOT PIN & 150-MM +/-5-MM | ||||
| (OVER FROM THE OUTER EDGE OF BOOM CENTERED & ORIENTATED SO THAT THE FILM CAN BE READ WHILE STANDING ON THE GROUND) | ||||
| 239-9430 | [1] | FILM-WARNING (ARM BRACE, READ OMM, INTL) | ||
| (ON SAFETY BRACE CENTERED FROM TOP TO BOTTOM & SIDE TO SIDE) | ||||
| 255-0793 | [1] | FILM-WARNING (READ OMM) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS LOCATED ON UPPER | ||||
| (HALF & THE SEATBELT FILM ON THE LOWER HALF) | ||||
| 255-0794 | [1] | FILM-WARNING (SEAT BELT) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS LOCATED ON UPPER | ||||
| (HALF & THE SEATBELT FILM ON THE LOWER HALF) | ||||
| 259-4402 | [1] | FILM-WARNING (HOT FLUID UNDER PRESSURE) | ||
| (ON TOP OF THE RADIATOR SHUNT TANK CAP. ORIENT FILM SO THAT IT CAN BE READ WHILE | ||||
| (LOOKING AT THE ENGINE AREA FROM THE LEFT SIDE OF THE TRACTOR) | ||||
| 224-8946 | [1] | FILM-WARNING (NO ETHER SPRAY/AIR INTK, INTL) | ||
| (UNDER HOOD ON PRE-CLEANER UNDER THE SERVICE FILM. ORIENT FILM SUCH THAT IT CAN BE READ FROM LEFT SIDE OF THE MACHINE) | ||||
| 240-7095 | [2] | FILM-WARNING (NO ENTRANCE, EXIT, READ OMM) | ||
| (ON THE REAR OF THE CAB AR THE BOTTOM STRUCTURE 50 +/- 5-MM FROM THE TOWARD RED REFLECTOR) | ||||
| B | USE AS REQUIRED | |||
#SEBP37061061
263-8591: PLATE & FILM GP
263-8591 PLATE & FILM GP
S/N CBD1-UP; MFG1-UP
PART OF 216-8801, 216-8821 BUCKET GP-MULTIPURPOSE
AN ATTACHMENT
S/N CBD1-UP; MFG1-UP
PART OF 216-8801, 216-8821 BUCKET GP-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 247-6118 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) |
#SEBP37061062
264-4292: PLATE & FILM GP
264-4292 PLATE & FILM GP
S/N MFG6001-UP
PART OF 398-5035 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N MFG6001-UP
PART OF 398-5035 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (ON MACHINE MAIN FRAME) | ||||
| 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | ||
| (ON MACHINE MAIN FRAME) | ||||
| 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | ||
| (INSIDE BATTERY BOX DOOR) | ||||
| 337-5351 | [1] | FILM-INSTRUCTION (START SWITCH) | ||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | ||
| (NEXT TO RADIATOR CAP) | ||||
| 225-0041 | [1] | FILM-INFORMATION (ROPS, FOPS, READ OMM) | ||
| (ON THE LH A-POST. UPPER FILM SHOULD BE NO WELD/NO DRILL & 0PS/FOPS IN LOWER POSITION) | ||||
| 124-2456 | [1] | FILM-INSTRUCTION (NO STEP) | ||
| (INSIDE BATTER BOX) | ||||
| 225-0312 | [1] | FILM-WARNING (JUMP START, READ OMM, INTL) | ||
| (INSIDE THE BATTERY BOX DOOR FROM THE BOTTOM EDGE) | ||||
| 239-9430 | [1] | FILM-WARNING (ARM BRACE, READ OMM, INTL) | ||
| (ON SAFETY BRACE CENTERED FROM TOP TO BOTTOM & SIDE TO SIDE) | ||||
| 8T-7038 | [1] | FILM-WARNING (DO NOT LIFT) | ||
| (ON TOP OF COUNTERWEIGHT) | ||||
| 259-4402 | [1] | FILM-WARNING (HOT FLUID UNDER PRESSURE) | ||
| (ON TOP OF RADIATOR SHUNT TANK CAP. ORIENT FILM SO THAT IT CAN BE READ WHILE | ||||
| LOOKING AT ENGINE AREA FROM LEFT SIDE OF TRACTOR) | ||||
| 219-0302 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| (ON LH A-POST. UPPER FILM SHOULD BE NO WELD/DRILL & FOPS/FOPS IN LOWER POSITION) | ||||
| 255-0793 | [1] | FILM-WARNING (READ OMM) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS LOCATED ON UPPER | ||||
| HALF & SEATBELT FILM ON LOWER HALF) | ||||
| 255-0794 | [1] | FILM-WARNING (SEAT BELT) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS LOCATED ON UPPER | ||||
| HALF & SEATBELT FILM ON LOWER HALF) | ||||
| 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | ||
| (ON FRONT SIDE OF COUNTERWEIGHT) | ||||
#SEBP37061063
372-5182: PLATE & FILM GP
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (ON MACHINE MAIN FRAME) | ||||
| 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | ||
| (ON MACHINE MAIN FRAME) | ||||
| 193-5913 B | [2] | PLUG | ||
| 193-5914 B | [16] | PLUG | ||
| 193-5915 B | [6] | PLUG | ||
| 193-5916 B | [4] | PLUG | ||
| 289-3412 | [1] | FILM-COVER (PROTECT) | ||
| (INSIDE BATTERY BOX ON THE LEFT SIDE 150-MM UP FROM THE BOTTOM OF THE BOX) | ||||
| 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | ||
| (INSIDE BATTERY BOX DOOR CENTERED FROM SIDE TO SIDE ABOVE THE JUMP START WARNING FILM & CENTERED FROM TOP TO BOTTOM | ||||
| BETWEEN THE JUMP START FILM & BEND IN THE DOOR) | ||||
| [1] | FILM-IDENTIFICATION (FUSE PANEL) | |||
| (INSIDE RH CONSOLE ACCESS PANEL. ORIENT FILM SUCH THAT IT CAN BE READ WHILE STANDING | ||||
| ON THE GROUND WITH THE ACCESS DOOR OPEN & VIEWING FILM) | ||||
| 231-9361 | [1] | FILM-IDENTIFICATION (FUSE, RELAY) | ||
| (UNDER RH CONSOLE COVER THAT COVERS THE POWER DISTRIBUTION BLOCK. ORIENT FILM SUCH THAT IT | ||||
| CAN BE READ WHEN THE COVER IS OPEN & THE BLOCK IS EXPOSED) | ||||
| 337-5351 | [1] | FILM-INSTRUCTION (START SWITCH) | ||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| [1] | FILM-IDENTIFICATION (LUBRICATION POINTS) | |||
| (UNDER THE HOOD ON PRE-CLEANER, REMOVE SUPPPLIER FILM & ORIENT FILM SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF THE | ||||
| MACHINE) | ||||
| 258-9999 | [2] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | ||
| (ON FRONT SIDE OF THE FRONT AXLE BETWEEN THE CHASSIS | ||||
| & WHEEL ASSEMBLY ON THE LH & RH SIDE OF THE MACHINE & ASLO ON THE STAB PAD CENTERED UNDER | ||||
| THE LIFTING HOLE ORIENTED WITH THE ARROW POINTING UP WHEN THE STABILIZER IS IN UPWARD POSITION) | ||||
| 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | ||
| (ON SHUNT TANK NEXT TO RADIATOR CAP ORIENTED SUCH THAT YOU CAN READ IT FROM MACHINE) | ||||
| 252-2157 | [4] | FILM-INFORMATION (TIE-DOWN) | ||
| (1-ON EACH SIDE OF THE MACHINE IN FRONT OF THE MAIN FRAME ABOVE THE FRONT AXLE ABOVE THE TIE DOWN MOUNTING PLATE. | ||||
| 2-IN THE REAR OF THE MACHINE ON THE MAIN FRAME NEXT TO THE TIE DOWN HOLES UNDER THE SWING) | ||||
| 124-2456 | [1] | FILM-INSTRUCTION (NO STEP) | ||
| (INSIDE BATTERY BOX DOOR 75-MM FROM THE RIGHT EDGE & THE TOP EDGE IS EVEN WITH THE 12-VOLT FILM) | ||||
| [1] | FILM-INSTRUCTION (BOOM LOCK) | |||
| (NEXT TO BOOM LOCK ON RH CONSOLE) | ||||
| [1] | FILM-INSTRUCTION (VARIABLE SPEED) | |||
| (ON RH CONSOLE NEXT TO GOVERNOR CONTROL HANDLE) | ||||
| 224-8946 | [1] | FILM-WARNING (NO ETHER SPRAY/AIR INTK, INTL) | ||
| (UNDER HOOD ON PRE-CLEANER UNDER THE SERVICE FILM. ORIENT FILM SUCH THAT IT CAN BE READ FROM LEFT SIDE OF THE MACHINE) | ||||
| 225-0312 | [1] | FILM-WARNING (JUMP START, READ OMM, INTL) | ||
| (INSIDE OF BATTERY BOX DOOR CENTERED ABOVE DOOR LATCH & 75-MM UP FROM THE EDGE OF DOOR) | ||||
| 226-1240 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL) | ||
| (ON BOOM 700-MM UP FROM CENTER LINE OF SWING & BOOM LOWER FOOT PIN & ALSO 150-MM | ||||
| OVER FROM THE OUTER EDGE OF BOOM) | ||||
| 239-9430 | [1] | FILM-WARNING (ARM BRACE, READ OMM, INTL) | ||
| (ON SAFETY BRACE CENTERED FROM TOP TO BOTTOM & SIDE TO SIDE) | ||||
| 240-7095 | [2] | FILM-WARNING (NO ENTRANCE, EXIT, READ OMM) | ||
| (ON THE REAR OF THE CAB AT THE BOTTOM STRUCTURE 50-MM FROM THE TOWARD RED REFLECTOR) | ||||
| 255-0793 | [1] | FILM-WARNING (READ OMM) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS LOCATED ON UPPER | ||||
| HALF & THE SEATBELT FILM ON THE LOWER HALF) | ||||
| 255-0794 | [1] | FILM-WARNING (SEAT BELT) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS LOCATED ON UPPER | ||||
| HALF & THE SEATBELT FILM ON THE LOWER HALF) | ||||
| 259-4402 | [1] | FILM-WARNING (HOT FLUID UNDER PRESSURE) | ||
| (ON TOP OF THE RADIATOR SHUNT TANK CAP. ORIENT FILM SO THAT IT CAN BE READ WHILE | ||||
| LOOKING AT THE ENGINE AREA FROM THE LEFT SIDE OF THE TRACTOR) | ||||
| B | USE AS REQUIRED | |||
#SEBP37061064
206-1701: PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM -ROTATING GUARD
S/N CBD1-UP; MFG1-UP
PART OF 204-4160, 204-4164, 292-9690, 292-9691, 396-9157, 396-9158, 433-6915, 433-6916 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N CBD1-UP; MFG1-UP
PART OF 204-4160, 204-4164, 292-9690, 292-9691, 396-9157, 396-9158, 433-6915, 433-6916 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-1852 | [1] | COVER-VANDALISM | |
| 2. | 206-1853 | [2] | BUSHING | |
| 3. | 206-1855 | [1] | PLATE | |
| 4. | 206-1856 | [1] | BRACKET | |
| 5. | 226-0291 J | [1] | LOCK AS (PROTECTION) | |
| 6. | 129-3178 M | [2] | LOCKNUT (M6X1-THD) | |
| 7. | 174-8131 M | [1] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 8. | 232-4636 | [2] | BOLT-CARRIAGE (M6X1X25-MM) | |
| 9. | 8C-9660 | [1] | WASHER (4.6X7.9X0.8-MM THK) | |
| 10. | 8T-2659 M | [1] | LOCKNUT (M4X0.7-THD) | |
| 11. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| J | REQUIRES 5P-85OO KEY | |||
| M | METRIC PART | |||
#SEBP37061065
119-1530: TRANSPORT AR-MACHINE
119-1530 TRANSPORT AR-MACHINE -WITHOUT BUCKET
S/N CBD1-UP; MFG1-UP
AN ATTACHMENT
S/N CBD1-UP; MFG1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 416E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 120-9289 Y | [1] | TRANSPORT GP-MACHINE (WITHOUT BUCKET) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37061066
120-9289: TRANSPORT GP-MACHINE
120-9289 TRANSPORT GP-MACHINE -WITHOUT BUCKET
S/N CBD1-UP; MFG1-UP
PART OF 119-1530 TRANSPORT AR-MACHINE
AN ATTACHMENT
S/N CBD1-UP; MFG1-UP
PART OF 119-1530 TRANSPORT AR-MACHINE
AN ATTACHMENT
For full view, you need register
