FUEL SYSTEM
LINES GP-FUELPUMP GP-FUEL INJECTION
FILTER GP-FUEL
FUEL SYSTEM
LINES GP-FUEL
#SEBP37070140
267-7069: LINES GP-FUEL
267-7069 LINES GP-FUEL
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37070141
269-7542: LINES GP-FUEL
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [12] | CLAMP-HOSE | |
| 2. | 7S-1912 | [1] | CLIP | |
| 3. | 215-9515 | [1] | CONNECTOR-HOSE (QUICK DISCONNECT) | |
| 4. | 216-6891 | [1] | TUBE AS | |
| 5. | 216-6892 | [1] | TUBE AS | |
| 6. | 241-4275 | [1] | TEE-SPECIAL | |
| 7. | 259-6918 | [1] | CONNECTOR-HOSE (QUICK DISCONNECT) | |
| 8. | 262-3704 | [1] | GUARD AS | |
| 9. | 269-0986 | [2] | FITTING-COUPLING | |
| 10. | 1P-7009 | [1] | CLIP | |
| 11. | 5P-9085 | [1] | CLIP (LOOP) | |
| 12. | 7N-3718 | [1] | CLIP | |
| 13. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 14. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 16. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 17. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 9M-8406 | [1] | CLIP (LOOP) | |
| 20. | 5P-1442 E | HOSE (87-CM) | ||
| 21. | 5P-1420 E | HOSE (34-CM) | ||
| 22. | 5P-1420 E | HOSE (13-CM) | ||
| 23. | 5P-1420 E | HOSE (29-CM) | ||
| 24. | 5P-1420 E | HOSE (82-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37070142
269-7542: LINES GP-FUEL
269-7542 LINES GP-FUEL
S/N HBE1-UP
PART OF 270-2143 ENGINE AR, 297-1329 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
S/N HBE1-UP
PART OF 270-2143 ENGINE AR, 297-1329 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37070143
310-4765: LINES GP-FUEL
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [10] | CLAMP-HOSE | |
| 2. | 215-9515 | [1] | CONNECTOR-HOSE (QUICK DISCONNECT) | |
| 3. | 222-3518 | [1] | TEE | |
| 4. | 259-6918 | [1] | CONNECTOR-HOSE (QUICK DISCONNECT) | |
| 5. | 1P-7009 | [1] | CLIP | |
| 6. | 7S-1912 | [1] | CLIP | |
| 7. | 8M-2773 | [2] | CLIP (LOOP) | |
| 8. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 9. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 10. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9M-8406 | [1] | CLIP (LOOP) | |
| 13. | 5P-1442 E | HOSE (126-CM) | ||
| 14. | 5P-1420 E | HOSE (130-CM) | ||
| 14A. | 5P-1420 E | HOSE (13.5-CM) | ||
| 14B. | 5P-1420 E | HOSE (76-CM) | ||
| 14C. | 5P-1420 E | HOSE (32-CM) | ||
| 15. | 7K-1181 | [1] | STRAP-CABLE | |
| 16. | 151-4841 | [1] | BLOCK | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37070144
310-4766: LINES GP-FUEL
310-4766 LINES GP-FUEL
S/N HBE2467-UP
PART OF 214-6901, 318-9546 ENGINE AR
AN ATTACHMENT
S/N HBE2467-UP
PART OF 214-6901, 318-9546 ENGINE AR
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [10] | CLAMP-HOSE | |
| 2. | 215-9515 | [1] | CONNECTOR-HOSE (QUICK DISCONNECT) | |
| 3. | 222-3518 | [1] | TEE | |
| 4. | 224-5917 | [1] | CONNECTOR-SPECIAL | |
| 5. | 6K-8178 | [1] | CLIP (LOOP) | |
| 6. | 7C-4354 | [1] | CLIP (SLOT) | |
| 7. | 7S-1912 | [1] | CLIP | |
| 8. | 8M-2773 | [3] | CLIP (LOOP) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 11. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 13. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 14. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 9M-8406 | [1] | CLIP (LOOP) | |
| 17. | 5P-1442 E | HOSE (126-CM) | ||
| 18. | 5P-1420 E | HOSE (126-CM) | ||
| 18A. | 5P-1420 E | HOSE (59-CM) | ||
| 18B. | 5P-1420 E | HOSE (55-CM) | ||
| 18C. | 5P-1420 E | HOSE (13.5-CM) | ||
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| 20. | 151-4841 | [1] | BLOCK | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37070145
247-4885: LINES GP-FUEL FILTER
247-4885 LINES GP-FUEL FILTER
S/N G4D1-UP; CRS1-UP
PART OF 319-2121 ENGINE AR, 227-4805 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 319-2121 ENGINE AR, 227-4805 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37070146
237-5214: PUMP GP-FUEL INJECTION
237-5214 PUMP GP-FUEL INJECTION
S/N G4D1-UP; CRS1-UP
PART OF 319-2121 ENGINE AR, 227-4805 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 319-2121 ENGINE AR, 227-4805 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0260 M | [3] | BOLT (M8X1.25X25-MM) | |
| 3. | 6I-0291 M | [1] | NUT (M8X1.25-THD) | |
| 4. | 035-8017 C | [1] | UNION | |
| 5. | 365-3308 C | [1] | NUT-COMPRESSION | |
| 6. | 067-6265 C | [1] | FITTING-BRASS | |
| 7. | 100-4830 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 111-3422 M | [1] | NUT (M14X1.5-THD) | |
| 9. | 111-3423 | [1] | WASHER | |
| 10. | 124-3815 M | [1] | BOLT (M8X1.25X16-MM) | |
| 11. | 140-8714 | [1] | CLIP | |
| 12. | 318-2365 C | [1] | CLIP | |
| 13. | 230-8989 | [1] | GEAR-FUEL PUMP (68-TEETH) | |
| 14. | 230-8995 | [1] | TUBE AS (CYL NO. 1) | |
| 15. | 230-8996 | [1] | TUBE AS (CYL NO. 2) | |
| 16. | 230-8997 | [1] | TUBE AS (CYL NO. 3) | |
| 17. | 230-8998 | [1] | TUBE AS (CYL NO. 4) | |
| 18. | 232-1323 | [1] | PLUG-CUP | |
| 19. | 232-1328 | [1] | CAP | |
| 20. | 232-1793 | [1] | CABLE | |
| 21. | 232-1794 | [3] | HOSE | |
| 22. | 232-2725 | [1] | CLIP | |
| 23. | 232-2726 | [1] | CLIP | |
| 25. | 232-3149 | [3] | WASHER (8.35X16.85X1.55-MM THK) | |
| 26. | 232-3157 | [1] | BRACKET | |
| 27. | 232-3274 M | [4] | BOLT (M8X1.25X48.1-MM) | |
| 28. | 235-1790 | [1] | SWITCH-TEMPERATURE (TIMING ADVANCE) | |
| 29. | 236-1674 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 236-1673 | [1] | NOZZLE | ||
| 275-1038 | [1] | SEAL-O-RING | ||
| 29A. | 140-8718 | [1] | WASHER | |
| 30. | 236-2144 C | [1] | TUBE AS | |
| 30A. | 067-6999 | [1] | FERRULE | |
| 31. | 238-8671 C | [4] | CLAMP-INJECTOR | |
| 32. | 240-5571 | [1] | BRACKET | |
| 33. | 249-9226 C | [1] | PUMP GP-FUEL INJECTION | |
| 33A. | 152-3968 | [1] | SEAL-O-RING | |
| 33B. | 176-6219 | [1] | SOLENOID (12-VOLT) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP37070147
237-5214: PUMP GP-FUEL INJECTION
237-5214 PUMP GP-FUEL INJECTION
S/N CRS1-UP
PART OF 227-4805 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 227-4805 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0260 M | [3] | BOLT (M8X1.25X25-MM) | |
| 3. | 178-3336 M | [1] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 4. | 035-8017 | [1] | UNION | |
| 5. | 365-3308 | [1] | NUT-COMPRESSION | |
| 6. | 067-6265 | [1] | FITTING-BRASS | |
| 7. | 100-4830 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 111-3422 M | [1] | NUT (M14X1.5-THD) | |
| 9. | 111-3423 | [1] | WASHER | |
| 10. | 124-3815 M | [1] | BOLT (M8X1.25X16-MM) | |
| 11. | 140-8714 | [1] | CLIP | |
| 12. | 318-2365 | [1] | CLIP | |
| 13. | 425-7107 | [1] | GEAR-FUEL PUMP (68-TEETH) | |
| 14. | 230-8995 | [1] | TUBE AS (CYL NO. 1) | |
| 15. | 230-8996 | [1] | TUBE AS (CYL NO. 2) | |
| 16. | 230-8997 | [1] | TUBE AS (CYL NO. 3) | |
| 17. | 230-8998 | [1] | TUBE AS (CYL NO. 4) | |
| 19. | 232-1328 | [1] | CAP | |
| 20. | 232-1793 | [1] | CABLE | |
| 21. | 232-1794 | [3] | HOSE | |
| 22. | 232-2725 | [1] | CLIP | |
| 23. | 232-2726 | [1] | CLIP | |
| 25. | 232-3149 | [3] | WASHER (8.35X16.85X1.55-MM THK) | |
| 26. | 232-3157 | [1] | BRACKET | |
| 27. | 232-3274 M | [4] | BOLT (M8X1.25X48.1-MM) | |
| 28. | 235-1790 | [1] | SWITCH-TEMPERATURE (TIMING ADVANCE) | |
| 29. | 236-1674 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 29A. | 236-1673 | [1] | NOZZLE | |
| 29B. | 275-1038 | [1] | SEAL-O-RING | |
| 29C. | 140-8718 | [1] | WASHER | |
| 30. | 236-2144 | [1] | TUBE AS | |
| 30A. | 067-6999 | [1] | FERRULE | |
| 31. | 238-8671 | [4] | CLAMP-INJECTOR | |
| 32. | 240-5571 | [1] | BRACKET | |
| 33. | 249-9226 | [1] | PUMP GP-FUEL INJECTION | |
| 33A. | 152-3968 | [1] | SEAL-O-RING | |
| 33B. | 176-6219 | [1] | SOLENOID (12-VOLT)(FUEL SHUTOFF) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP37070148
313-1333: PUMP GP-FUEL INJECTION
313-1333 PUMP GP-FUEL INJECTION
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0260 M | [3] | BOLT (M8X1.25X25-MM) | |
| 3. | 6I-0291 M | [1] | NUT (M8X1.25-THD) | |
| 4. | 100-4830 M | [1] | BOLT (M10X1.5X20-MM) | |
| 5. | 124-3815 M | [1] | BOLT (M8X1.25X16-MM) | |
| 6. | 140-8714 | [1] | CLIP | |
| 7. | 155-8804 | [1] | CAP | |
| 8. | 232-1323 | [1] | PLUG-CUP | |
| 9. | 232-1328 | [1] | CAP (FUEL INJECTOR) | |
| 10. | 232-1793 | [1] | CABLE | |
| 11. | 232-1794 | [3] | HOSE | |
| 12. | 232-2720 | [1] | TUBE AS (CYL NO. 1) | |
| 13. | 232-2721 | [1] | TUBE AS (CYL NO. 2) | |
| 14. | 232-2722 | [1] | TUBE AS (CYL NO. 3) | |
| 15. | 232-2723 | [1] | TUBE AS (CYL NO. 4) | |
| 16. | 232-2725 | [2] | CLIP | |
| 17. | 232-2726 | [1] | CLIP | |
| 18. | 232-3149 | [3] | WASHER (8.35X16.85X1.55-MM THK) | |
| 19. | 232-3157 | [1] | BRACKET | |
| 20. | 232-3274 M | [4] | BOLT (M8X1.25X48.1-MM) | |
| 21. | 233-7104 | [1] | GEAR-PUMP (FUEL) | |
| 22. | 235-1790 | [1] | SWITCH-TEMPERATURE (FUEL) | |
| 23. | 238-8671 | [4] | CLAMP-INJECTOR | |
| 24. | 240-5571 | [1] | BRACKET | |
| 25. | 266-3712 | [1] | PUMP GP-FUEL INJECTION | |
| 208-5029 | VALVE GP-SOLENOID (12-VOLT) | |||
| 26. | 266-6830 | [4] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 26A. | 140-8718 | [1] | WASHER | |
| 26B. | 234-0387 | [1] | NOZZLE | |
| 26C. | 275-1038 | [1] | SEAL-O-RING | |
| 27. | 332-7549 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP37070149
228-9129: PUMP GP-FUEL PRM & PRIM FILTER
228-9129 PUMP GP-FUEL PRM & PRIM FILTER -WITH WATER SEPARATOR
S/N HBE1-UP
PART OF 253-0352 PUMP GP-FUEL PRM & PRIM FILTER
AN ATTACHMENT
S/N HBE1-UP
PART OF 253-0352 PUMP GP-FUEL PRM & PRIM FILTER
AN ATTACHMENT
For full view, you need register
Information:
FUEL SYSTEM
LINES GP-FUEL
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Caterpillar Parts SIS Catalog 422E :
Truck sale:
$23,594 USD
