AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-1700 CONSOLE GP-OPERATOR -RH S/N HBE1-UP PART OF 204-4166, 204-4168, 214-6960, 285-3230 CAB AR-ENCLOSED ROPS, 204-4167, 204-4170, 285-0439, 285-3229 CANOPY AR-OPEN ROPS AN ATTACHMENT 422E


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC

BACKHOE LOADER 422E BACKHOE LOADER HBE
 422E Backhoe Loader Single Tilt Side Shift Boom HBE00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3707 422E HBE   (2006)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
211-4243 WIRING GP-CONSOLE
WIRING GP-CONSOLE
211-4245 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
206-1700 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
TRIM GP-CAB
206-1704 TRIM GP-CAB
PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM
 

#SEBP37070860
 

206-1700: CONSOLE GP-OPERATOR

206-1700 CONSOLE GP-OPERATOR -RH
S/N HBE1-UP
PART OF 204-4166, 204-4168, 214-6960, 285-3230 CAB AR-ENCLOSED ROPS, 204-4167, 204-4170, 285-0439, 285-3229 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02142915 SEBP3707
2061700 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1679 [1] PANEL AS (UPPER)  
6. 206-1681 [1] PANEL AS (LOWER)  
7. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [4] CLIP (TRIM)  
8. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
9. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
10. 206-1690 [1] COVER (FENDER, REAR)  
11. 206-1692 [1] COVER AS (CONTROLS, REAR)  
  206-1667 [3] CLIP (TRIM)  
12. 293-1980 E SEAL (73-CM)  
12A. 293-1980 E SEAL (78-CM)  
13. 248-2709 B [2] PLUG  
14. 9X-2038 [5] WASHER (7X19X2-MM THK)  
15. 206-1687 [1] COVER-FUSE  
16. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37070861
 

206-1702: CONSOLE GP-OPERATOR

206-1702 CONSOLE GP-OPERATOR -LH
S/N HBE1-UP
PART OF 204-4168, 214-6960 CAB AR-ENCLOSED ROPS, 204-4170, 285-3229 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02158476 SEBP3707
2061702 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (34-CM)  
2. 5P-5927 D SEAL (1.7-M)  
3. 206-1696 [1] CONSOLE AS (LH)  
4. 206-1698 [1] DOOR-STORAGE  
5. 206-1699 [1] CUP HOLDER  
6. 206-1706 [1] BOX AS-STORAGE  
7. 206-1708 J [1] LOCK AS  
8. 206-1712 [1] HINGE-DOOR  
9. 210-6491 [1] CUP HOLDER  
10. 249-2482 [1] PLATE  
11. 261-9636 [1] BRACKET-SUPPORT  
12. 261-9637 [2] BRACKET AS  
13. 261-9639 [3] SCREW-PAN HEAD (12.0X0.5-IN)  
14. 293-1980 E SEAL (71-CM)  
14A. 293-1980 E SEAL (77-CM)  
15. 5C-2890 M [3] NUT (M6X1-THD)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 9X-2038 [6] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [19] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP37070862
 

206-1703: CONSOLE GP-OPERATOR

206-1703 CONSOLE GP-OPERATOR -FRONT
S/N HBE1-UP
PART OF 204-4166, 204-4168, 214-6960, 285-3230 CAB AR-ENCLOSED ROPS, 204-4167, 204-4170, 285-0439, 285-3229 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
i02142908 SEBP3707
2061703 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-5293 B [1] PLUG  
2. 206-1658 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
3. 206-1659 [1] DOOR-STORAGE  
4. 206-1660 [1] COVER AS-STEERING COLUMN (FRONT)  
  206-1667 [4] CLIP (TRIM)  
5. 206-1661 [1] COVER AS-STEERING COLUMN (REAR)  
  206-1667 [4] CLIP (TRIM)  
6. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
7. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
8. 206-1708 J [1] LOCK AS  
9. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
10. 220-0738 E SEAL (22-CM)  
11. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
12. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
13. 233-5260 [2] LANYARD  
14. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
15. 206-1854 [1] HINGE  
16. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
17. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
18. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 258-2354 [1] BRACKET-LATCH  
20. 9X-2038 [3] WASHER (7X19X2-MM THK)  
21. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
22. 5P-7070 D INSULATION-STRIP (0.03-M EACH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP37070863
 

206-1703: CONSOLE GP-OPERATOR

206-1703 CONSOLE GP-OPERATOR -FRONT
S/N HBE1-UP
PART OF 204-4166, 204-4168, 214-6960 CAB AR-ENCLOSED ROPS, 204-4167, 204-4170, 285-0439, 285-3229 CANOPY AR-OPEN ROPS
Type 2
AN ATTACHMENT
i04785896 SEBP3707
2061703 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-1057 C [1] PLUG  
2. 206-1658 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
3. 206-1659 [1] DOOR-STORAGE  
4. 206-1660 [1] COVER AS-STEERING COLUMN (FRONT)  
5. 206-1661 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
6. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
7. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
8. 206-1708 J [1] LOCK AS  
9. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
10. 220-0738 E SEAL (22-CM)  
11. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
  [2] ROD  
12. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
13. 233-5260 [2] LANYARD  
14. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
15. 206-1854 [1] HINGE  
16. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
17. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
18. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 258-2354 [1] BRACKET-LATCH  
20. 9X-2038 [3] WASHER (7X19X2-MM THK)  
21. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
22. 5P-7070 D INSULATION-STRIP (0.03-M EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP37070864
 

221-3002: CONTROL & MTG GP-STABILIZER

221-3002 CONTROL & MTG GP-STABILIZER
S/N HBE1-UP
PART OF 253-8986 CONTROL GP-STABILIZER
AN ATTACHMENT
i02214405 SEBP3707
2213002 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3006 Y [2] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
6. 229-5280 [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
18. 8T-6902 [1] CLIP  
19. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37070865
 

221-3004: CONTROL & MTG GP-STABILIZER

221-3004 CONTROL & MTG GP-STABILIZER -WITH ALARM
S/N HBE1-UP
PART OF 253-8987 CONTROL GP-STABILIZER
AN ATTACHMENT
i02158592 SEBP3707
2213004 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3005 Y [2] CONTROL GP-HYDRAULIC HAND  
6. 229-5280 [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
18. 8T-6902 [1] CLIP  
19. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37070866
 

206-1645: CONTROL GP-HYDRAULIC HAND

206-1645 CONTROL GP-HYDRAULIC HAND -LOADER
S/N HBE1-UP
PART OF 230-4940 VALVE AR-BANK 2
AN ATTACHMENT
i02214344 SEBP3707
2061645 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 9R-1765 [1] COVER-TOP (TOP)  
6. 9R-1766 [1] COVER-BOTTOM  
7. 9R-1767 [1] BOOT  
8. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
12. 164-1368 [12] FASTENER (CLIP)  
13. 183-3135 [1] JOINT AS  
  183-3136 [1] BUSHING  
14. 183-3137 [1] PIN  
15. 206-1695 [1] BOOT  
16. 209-3363 [1] ROD  
17. 291-5108 [1] GASKET  
18. 216-3358 [1] DAMPER AS (SPRING)  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
19. 216-3351 [1] ROD  
20. 220-0269 [1] SHAFT  
21. 230-2510 [1] LEVER AS  
  183-3134 [2] BEARING  
22. 269-8129 [1] BRACKET AS  
23. 269-8817 [1] PLATE  
24. 270-2795 [1] PLATE  
25. 272-7104 [1] ROD  
27. 179-8235 [1] LOCK PIN  
28. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
29. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
30. 7X-7729 [4] WASHER (11X25X3-MM THK)  
31. 8C-4987 [1] PIN-CLEVIS  
32. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [6] NUT (M10X1.5-THD)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
37. 8T-4773 [2] BALL JOINT  
38. 8T-4815 [2] ROD END  
39. 8T-9501 [2] SCREW (10-16X0.75-IN)  
40. 9R-2807 [1] CLIP (RETAINER)  
41. 9R-3067 [1] PIN  
42. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
43. 3E-6600 E SEAL (6.5-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37070867
 

209-3364: CONTROL GP-HYDRAULIC HAND

209-3364 CONTROL GP-HYDRAULIC HAND -LOADER
S/N HBE1-UP
PART OF 230-4942 VALVE AR-BANK 3
AN ATTACHMENT
i02155062 SEBP3707
2093364 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [10] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [4] RING-RETAINING  
3. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 9R-1765 [1] COVER-TOP  
6. 9R-1766 [1] COVER-BOTTOM  
7. 9R-1767 [1] BOOT  
8. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (PUSH BUTTON)  
9. 9X-2065 M [3] NUT (M10X1.5-THD, LH)  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 134-0453 M [3] TURNBUCKLE (M10X1.5X50-MM)  
12. 164-1368 [12] FASTENER (CLIP)  
13. 183-3135 [1] JOINT AS  
13A. 183-3136 [1] BUSHING  
14. 183-3137 [1] PIN  
15. 206-1668 [1] BOOT  
16. 209-3363 [1] ROD  
17. 216-3350 [1] ROD  
18. 216-3351 [1] ROD  
19. 216-3358 [1] DAMPER AS (SPRING)  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
20. 291-5108 [1] GASKET  
21. 220-0269 [1] SHAFT  
22. 220-3251 [1] ROD  
23. 230-2510 [1] LEVER AS  
23A. 183-3134 [2] BEARING  
24. 230-3038 [1] LEVER AS  
24A. 183-3136 [1] BUSHING  
25. 269-8129 [1] BRACKET AS  
26. 269-8817 [1] PLATE  
27. 270-2795 [1] PLATE  
28. 272-7104 [1] ROD  
30. 164-1395 [1] KNOB  
31. 179-8235 [2] LOCK PIN  
32. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
34. 7X-7729 [4] WASHER (11X25X3-MM THK)  
35. 8C-4987 [2] PIN-CLEVIS  
36. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [9] NUT (M10X1.5-THD)  
38. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
39. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4773 [3] BALL JOINT  
43. 8T-4815 [3] ROD END  
44. 8T-9501 [2] SCREW (10-16X0.75-IN)  
45. 9R-2807 [1] CLIP (RETAINER)  
46. 9R-3067 [1] PIN  
47. 3E-6600 E SEAL (7-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37070868
 

209-3372: CONTROL GP-HYDRAULIC HAND

209-3372 CONTROL GP-HYDRAULIC HAND -4-FUNCTION, STANDARD
S/N HBE1-UP
AN ATTACHMENT
i02155029 SEBP3707
2093372 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1361 [2] BOOT  
2. 164-1371 [2] PLATE  
3. 164-1399 [2] KNOB  
4. 164-1406 [2] ROD  
5. 164-1441 [2] ROD  
6. 164-1451 [1] BRACKET AS  
7. 164-1452 [1] BRACKET AS  
8. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
9. 206-1672 [1] CONSOLE  
10. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 231-2866 [1] LEVER AS (RH)  
12. 231-2867 [1] LEVER AS (LH)  
13. [1] GASKET  
14. 248-2719 [1] TOWER AS  
15. [1] FILM-WARNING (CONTROL PATTERN, READ OMM)  
16. 179-8235 [4] LOCK PIN  
17. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
18. 8C-4987 [4] PIN-CLEVIS  
19. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
21. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-4773 [4] BALL JOINT  
23. 8T-4815 [4] ROD END  
24. 8T-7547 M [8] BOLT (M8X1.25X30-MM)  
25. 9R-9901 [6] FASTENER (CLIP)  
26. 9X-2038 [4] WASHER (7X19X2-MM THK)  
27. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 8T-4133 M [8] NUT (M10X1.5-THD)  
29. 9G-3732 B [4] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37070869
 

221-3005: CONTROL GP-HYDRAULIC HAND

221-3005 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N HBE1-UP
PART OF 221-3004 CONTROL & MTG GP-STABILIZER
AN ATTACHMENT
i02398223 SEBP3707
2213005 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 422E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4592 [1] KNOB  
2. 228-4593 [1] BOOT-PROTECTION  
3. 228-4595 [1] SWITCH AS (STABILIZER UP ALARM)  
4. 228-4597 [1] CLIP  
5. 232-3072 [1] CABLE AS  
 

Information:

Caterpillar Parts SIS Catalog 422E :

CONDENSER & MTG GP-REFRIGERANT
211-0705 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
214-4302 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
248-5025 COMPRESSOR & MTG GP-REFRIG
COMPRESSOR & MTG GP-REFRIG
248-5025 COMPRESSOR & MTG GP-REFRIG
COMPARTMENT GP-LITERATURE
248-2720 COMPARTMENT GP-LITERATURE
CANOPY GP-OPEN ROPS
293-5075 CANOPY GP-OPEN ROPS
CANOPY GP-OPEN ROPS
291-0491 CANOPY GP-OPEN ROPS
CANOPY GP-OPEN ROPS
206-1887 CANOPY GP-OPEN ROPS
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONTROL & MTG GP-STABILIZER
221-3002 CONTROL & MTG GP-STABILIZER
CONTROL & MTG GP-STABILIZER
221-3004 CONTROL & MTG GP-STABILIZER
CONTROL GP-HYDRAULIC HAND
206-1645 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3364 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3372 CONTROL GP-HYDRAULIC HAND

Truck sale:

Caterpillar 422E, Construction
 
Caterpillar 422E, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia
 
$23,594 USD 
CATERPILLAR 422E 2006
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 422E 2008
 
CATERPILLAR 422E 2008
- BACKHOE LOADERS
WILLIAM ADAMS PTY. LTD.
Australia
CATERPILLAR 422 E 2008
 
CATERPILLAR 422 E 2008
- BACKHOE LOADERS
WILLIAM ADAMS PTY. LTD.
Australia
CATERPILLAR 422 E 2012
 
CATERPILLAR 422 E 2012
- BACKHOE LOADERS
BERGERAT MONNOYEUR ROMANIA
Romania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.