AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

248-2358 PUMP GP-FUEL INJECTION S/N CRS1-UP FIELD REPLACEMENT FOR @@@@@236-8228@@@@@ FOR USE WITH 2000 RPM RATED ENGINES 430E


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL

BACKHOE LOADER 430E BACKHOE LOADER EAT
 430E Backhoe Loader Center Pivot EAT00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3708 430E EAT   (2006)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-8228 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
248-2356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
248-2357 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
248-2358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
313-1371 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
313-1371 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
328-7358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
328-7358 PUMP GP-FUEL INJECTION
 

#SEBP37080110
 

248-2358: PUMP GP-FUEL INJECTION

248-2358 PUMP GP-FUEL INJECTION
S/N CRS1-UP
FIELD REPLACEMENT FOR @@@@@236-8228@@@@@
FOR USE WITH 2000 RPM RATED ENGINES
i02100182 SEBP3708
2482358 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
2. 152-3968 [1] SEAL-O-RING  
 

#SEBP37080111
 

313-1371: PUMP GP-FUEL INJECTION

313-1371 PUMP GP-FUEL INJECTION
S/N CRS1-1238
PART OF 319-2122 ENGINE AR, 245-6842, 320-8415, 354-7395 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02788715 SEBP3708
3131371 PUMP GP-FUEL INJECTION Parts scheme 3131371 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 140-8714 [1] CLIP  
10. 318-2365 [1] CLIP  
11. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
12. 230-8995 [1] TUBE AS (CYL NO. 1)  
13. 230-8996 [1] TUBE AS (CYL NO. 2)  
14. 230-8997 [1] TUBE AS (CYL NO. 3)  
15. 230-8998 [1] TUBE AS (CYL NO. 4)  
16. 232-1323 [1] PLUG-CUP  
17. 232-1328 [1] CAP  
18. 232-1793 [1] CABLE  
19. 232-1794 [3] HOSE  
20. 232-2725 [2] CLIP  
21. 232-2726 [1] CLIP  
22. 232-3126 [1] CLIP  
23. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
24. 232-3157 [1] BRACKET  
25. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
26. 235-1790 [1] SWITCH-TEMPERATURE (FUEL)  
27. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  275-1038 [1] SEAL-O-RING  
  236-1673 [1] NOZZLE  
27A. 140-8718 [1] WASHER  
28. 236-2144 [1] TUBE AS  
28A. 067-6999 [1] FERRULE  
29. 236-8228 Y [1] PUMP GP-FUEL INJECTION  
30. 238-8671 [4] CLAMP-INJECTOR  
31. 240-5571 [1] BRACKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080112
 

313-1371: PUMP GP-FUEL INJECTION

313-1371 PUMP GP-FUEL INJECTION
S/N CRS1-UP
PART OF 319-2122 ENGINE AR, 320-8415, 354-7395 ENGINE AR-PRIMARY
AN ATTACHMENT
i04895936 SEBP3708
3131371 PUMP GP-FUEL INJECTION Parts scheme 3131371 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 140-8714 [1] CLIP  
10. 318-2365 [1] CLIP  
11. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
12. 230-8995 [1] TUBE AS (CYL NO. 1)  
13. 230-8996 [1] TUBE AS (CYL NO. 2)  
14. 230-8997 [1] TUBE AS (CYL NO. 3)  
15. 230-8998 [1] TUBE AS (CYL NO. 4)  
17. 232-1328 [1] CAP  
18. 232-1793 [1] CABLE  
19. 232-1794 [3] HOSE  
20. 232-2725 [2] CLIP  
21. 232-2726 [1] CLIP  
22. 232-3126 [1] CLIP  
23. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
24. 232-3157 [1] BRACKET  
25. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
26. 235-1790 [1] SWITCH-TEMPERATURE (FUEL)  
27. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  275-1038 [1] SEAL-O-RING  
  236-1673 [1] NOZZLE  
27A. 140-8718 [1] WASHER  
28. 236-2144 [1] TUBE AS  
28A. 067-6999 [1] FERRULE  
29. 236-8228 Y [1] PUMP GP-FUEL INJECTION  
30. 238-8671 [4] CLAMP-INJECTOR  
31. 240-5571 [1] BRACKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080113
 

328-7358: PUMP GP-FUEL INJECTION

328-7358 PUMP GP-FUEL INJECTION
S/N CRS1-UP
PART OF 325-5122 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
i03088569 SEBP3708
3287358 PUMP GP-FUEL INJECTION Parts scheme 3287358 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 140-8714 [1] CLIP  
10. 318-2365 [1] CLIP  
11. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
12. 230-8995 [1] TUBE AS (CYL NO. 1)  
13. 230-8996 [1] TUBE AS (CYL NO. 2)  
14. 230-8997 [1] TUBE AS (CYL NO. 3)  
15. 230-8998 [1] TUBE AS (CYL NO. 4)  
16. 232-1323 [1] PLUG-CUP  
17. 232-1328 [1] CAP (FUEL INJECTOR)  
18. 232-1793 [1] CABLE  
19. 232-1794 [3] HOSE  
20. 232-2725 [2] CLIP  
21. 232-2726 [1] CLIP  
22. 232-3126 [1] CLIP  
23. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
24. 232-3157 [1] BRACKET  
25. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
26. 235-1790 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
27. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
27A. 140-8718 [1] WASHER  
27B. 275-1038 [1] SEAL-O-RING  
27C. 236-1673 [1] NOZZLE  
28. 236-2144 [1] TUBE AS  
28A. 067-6999 [1] FERRULE  
29. 236-8228 Y [1] PUMP GP-FUEL INJECTION  
30. 238-8671 [4] CLAMP-INJECTOR  
31. 240-5571 [1] BRACKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080114
 

328-7358: PUMP GP-FUEL INJECTION

328-7358 PUMP GP-FUEL INJECTION
S/N CRS1-UP
PART OF 325-5122 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
i04896078 SEBP3708
3287358 PUMP GP-FUEL INJECTION Parts scheme 3287358 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
3. 6I-0291 M [1] NUT (M8X1.25-THD)  
4. 035-8017 [1] UNION  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 140-8714 [1] CLIP  
10. 318-2365 [1] CLIP  
11. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
12. 230-8995 [1] TUBE AS (CYL NO. 1)  
13. 230-8996 [1] TUBE AS (CYL NO. 2)  
14. 230-8997 [1] TUBE AS (CYL NO. 3)  
15. 230-8998 [1] TUBE AS (CYL NO. 4)  
17. 232-1328 [1] CAP (FUEL INJECTOR)  
18. 232-1793 [1] CABLE  
19. 232-1794 [3] HOSE  
20. 232-2725 [2] CLIP  
21. 232-2726 [1] CLIP  
22. 232-3126 [1] CLIP  
23. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
24. 232-3157 [1] BRACKET  
25. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
26. 235-1790 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
27. 236-1674 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
27A. 140-8718 [1] WASHER  
27B. 275-1038 [1] SEAL-O-RING  
27C. 236-1673 [1] NOZZLE  
28. 236-2144 [1] TUBE AS  
28A. 067-6999 [1] FERRULE  
29. 236-8228 Y [1] PUMP GP-FUEL INJECTION  
30. 238-8671 [4] CLAMP-INJECTOR  
31. 240-5571 [1] BRACKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080115
 

228-9129: PUMP GP-FUEL PRM & PRIM FILTER

228-9129 PUMP GP-FUEL PRM & PRIM FILTER -WITH WATER SEPARATOR
S/N EAT1-UP
PART OF 253-0352 PUMP GP-FUEL PRM & PRIM FILTER
i01930564 SEBP3708
2289129 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-8118 [1] RING-RETAINING  
2. 228-9130 [1] FILTER AS-WATER SEP & FUEL  
3. 228-9132 [1] FITTING  
4. 193-0618 [1] SENSOR GP-MOISTURE (WATER SEPARATOR)  
5. 149-9954 [1] DRAIN AS  
 

#SEBP37080116
 

253-0352: PUMP GP-FUEL PRM & PRIM FILTER

253-0352 PUMP GP-FUEL PRM & PRIM FILTER -WITH MOUNTING
S/N EAT1-1403
PART OF 214-6903 ENGINE AR
i02116937 SEBP3708
2530352 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 069-4080 [1] FITTING  
3. 165-7951 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  157-1669 [1] CONNECTOR  
4. 228-9129 Y [1] PUMP GP-FUEL PRM & PRIM FILTER (WITH WATER SEPARATOR)  
5. 253-0354 [1] BRACKET AS  
6. 3J-1907 [2] SEAL-O-RING  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
9. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
10. 9S-4191 [2] PLUG (9/16-18-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080117
 

253-0352: PUMP GP-FUEL PRM & PRIM FILTER

253-0352 PUMP GP-FUEL PRM & PRIM FILTER -WITH MOUNTING
S/N EAT1404-UP
PART OF 214-6903 ENGINE AR
Type 1
i03158703 SEBP3708
2530352 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [2] STRAP-CABLE  
2. 069-4080 [1] FITTING  
3. 165-7951 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  157-1669 [1] CONNECTOR  
4. 228-9129 Y [1] PUMP GP-FUEL PRM & PRIM FILTER (WITH WATER SEPARATOR)  
5. 253-0354 [1] BRACKET AS  
6. 3J-1907 [2] SEAL-O-RING  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
9. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
10. 9S-4191 [2] PLUG (9/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080118
 

253-0352: PUMP GP-FUEL PRM & PRIM FILTER

253-0352 PUMP GP-FUEL PRM & PRIM FILTER -WITH MOUNTING
S/N EAT1404-UP
PART OF 214-6903 ENGINE AR
Type 2
i04790685 SEBP3708
2530352 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 069-4080 [1] FITTING  
3. 165-7951 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  157-1669 [1] CONNECTOR  
4. 349-1063 CY [1] PUMP GP-FUEL PRM & PRIM FILTER (WITH WATER SEPARATOR)  
5. 253-0354 [1] BRACKET AS  
6. 3J-1907 [2] SEAL-O-RING  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
9. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
10. 9S-4191 [2] PLUG (9/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080119
 

349-1063: PUMP GP-FUEL PRM & PRIM FILTER

349-1063 PUMP GP-FUEL PRM & PRIM FILTER -WITH WATER SEPARATOR
S/N EAT1404-UP
PART OF 253-0352 PUMP GP-FUEL PRM & PRIM FILTER
i04127949 SEBP3708
3491063 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-8118 [1] RING-RETAINING  
2. 149-9954 [1] DRAIN AS  
3. 193-0618 [1] SENSOR GP-MOISTURE (WATER SEPARATOR)  
  192-7876 [1] SCREW-MOUNTING  
4. 361-9554 [1] ELEMENT-WATER SEPARATOR (FUEL FILTER)  
5. 228-9132 [1] FITTING  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Specifications
Fuel Injection Nozzles
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump
3054C Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump Timing - Adjust
3054C Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3054C Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove - Delphi DP210
3054C Engines for Caterpillar Built Machines
Fuel Injection Pump - Install - Delphi DP210
3054C Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 430E :

PUMP GP-FUEL INJECTION
248-2357 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
248-2356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-8228 PUMP GP-FUEL INJECTION
LINES GP-FUEL FILTER
247-4885 LINES GP-FUEL FILTER
LINES GP-FUEL
247-5361 LINES GP-FUEL
FILTER GP-WATER SEP & FUEL
285-3605 FILTER GP-WATER SEP & FUEL
CONTROL GP-GOVERNOR
206-1640 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
206-1640 CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
313-1371 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
313-1371 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
328-7358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
328-7358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRM & PRIM FILTER
228-9129 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
253-0352 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
253-0352 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
253-0352 PUMP GP-FUEL PRM & PRIM FILTER

Truck sale:

 
69,000 
Caterpillar 430EST, Construction
- backhoe loader
IIASA - IMPORTADORA INDUSTR. AGRICOLA SA
Ecuador
Caterpillar 430EST, Construction
39,500 
Caterpillar 430EST, Construction
- backhoe loader
HOLT OF CALIFORNIA
Caterpillar 430EST, Construction
38,000 
Caterpillar 430EST, Construction
- backhoe loader
QUINN COMPANY
Caterpillar 430EST, Construction
38,000 
Caterpillar 430EST, Construction
- backhoe loader
QUINN COMPANY
Caterpillar 430E EMPTH, Construction
91,500 
Caterpillar 430E EMPTH, Construction
- backhoe loader
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.