305-4172 WIRING GP-RIDE CONTROL S/N BXE1-UP PART OF 303-8537 CONTROL AR-RIDE AN ATTACHMENT 432E BACKHOE LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 305-4172 WIRING GP-
1. 225-7996 WIRING GP-
2. 211-4266 WIRING GP-
3. 211-4254 WIRING GP-
4. 263-9487 WIRING GP-
5. 211-4257 WIRING GP-
6. 211-4257 WIRING GP-
7. 211-4258 WIRING GP-
8. 296-0376 WIRING GP-

BRAKING SYSTEM

BRAKE GP

9. 230-5740 AXLE GP-DR
0. INFORMATION

BACKHOE LOADER 432E BACKHOE LOADER BXE
432E Backhoe Loader Parallel Lift Side Shift Boom BXE00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3712 432E BXE (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

246-8056 WIRING GP-RIDE CONTROL

305-4171 WIRING GP-RIDE CONTROL

305-4172 WIRING GP-RIDE CONTROL

225-7996 WIRING GP-STABILIZER

211-4266 WIRING GP-STEERING

211-4254 WIRING GP-TRANSMISSION CONTROL

#SEBP37120260

305-4172: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

305-4172 WIRING GP-RIDE CONTROL
S/N BXE1-UP
PART OF 303-8537 CONTROL AR-RIDE
AN ATTACHMENT

i02699586 SEBP3712

3054172 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	106-8704	[3]	SUPPRESSOR AS-ARC
3.	146-9439	[1]	RELAY AS (12-VOLT)
4.	213-6064	[1]	HARNESS AS-CHASSIS (LOAD CONTROL)
5.	246-8038	[1]	HARNESS AS-CONTROL (RIDE)
6.	253-9396	[1]	SWITCH AS-ROCKER (RIDE CONTROL, LOAD CONTROL)(RIDE CONTROL)
7.	304-5696	[1]	SWITCH AS-PRESSURE (LIFT CYLINDER)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	115-1615	[2]	RELAY AS (12-VOLT)
9.	3J-1907	[1]	SEAL-O-RING
10.	3S-2093	[11]	STRAP-CABLE
11.	4P-7581	[1]	CLIP (LADDER)

#SEBP37120261

225-7996: WIRING GP-STABILIZER

WIRING GP-STABILIZER

225-7996 WIRING GP-STABILIZER
S/N BXE1-2199
PART OF 253-1055 VALVE GP-PILOT
AN ATTACHMENT

i02416774 SEBP3712

2257996 WIRING GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	8Y-7833	[1]	WIRE AS (18-GA)
2.	173-7003	[1]	RELAY AS-TIMER

#SEBP37120262

211-4266: WIRING GP-STEERING

WIRING GP-STEERING

211-4266 WIRING GP-STEERING
S/N BXE1-UP
PART OF 218-3341 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i02163449 SEBP3712

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	106-8704	[6]	SUPPRESSOR AS-ARC
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	107-9677	[1]	SENSOR AS-POSITION (ALL WHEEL STEER)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	115-1615	[3]	RELAY AS (12-VOLT)(FUEL INJECTION)
5.	128-5091	[1]	SWITCH AS-PRESSURE (BRAKE SYSTEM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	206-1709	[1]	HOUSING-GAUGE
7.	213-6081	[1]	HARNESS AS-PLATFORM
	8L-8413	[29]	STRAP-CABLE (WHITE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8.	213-6082	[1]	HARNESS AS-CAB
	8L-8413	[14]	STRAP-CABLE (WHITE)
	091-2436	[10]	TERMINAL-BLADE (18-GA TO 22-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	7N-7221	[1]	TERMINAL-BLADE (18-GA TO 22-GA)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	213-6083	[1]	HARNESS AS-SOLENOID
	8L-8413	[12]	STRAP-CABLE (WHITE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	9X-1055	[6]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[8]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	3E-5519	[2]	PLUG AS-CONNECTOR (5-PIN)
	155-2270	[9]	KIT-CONNECTING PLUG (2-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH PLUG KIT INCLUDES PLUG KIT, WEDGE & INTERFACE SEAL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
10.	214-4724	[1]	PLUG-ILLUMINATED
11.	214-4727	[1]	SWITCH AS-TOGGLE (ALL WHEEL STEER)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
12.	222-7106	[1]	COVER
13.	223-9079	[1]	LEVER AS
14.	223-9080	[1]	CLAMP AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
15.	251-9570	[1]	PLATE AS
16.	134-2305	[1]	SEAL
17.	104-2091	[1]	SCREW-FLAT HEAD (6-20X0.5-IN)
18.	170-6307	[1]	INDICATOR GP-STEERING (REAR)
	4B-2043	[3]	NUT (8-32-THD)
	7X-9065	[1]	LAMP (12-VOLT)
	9B-7233	[3]	LOCKWASHER
19.	175-3265	[2]	SCREW (8-16X0.63-IN)
20.	3K-0360	[1]	SEAL-O-RING
21.	3S-2093	[23]	STRAP-CABLE
22.	4P-8134	[1]	CLIP (LADDER)(LADDER)
23.	6V-9327 M	[1]	SETSCREW-SOCKET (M6X1-THD)
24.	8T-0337 M	[3]	SCREW-MACHINE (M4X0.7X12-MM)
25.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4133 M	[1]	NUT (M10X1.5-THD)
27.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
28.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
29.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
30.	8T-4171 M	[3]	BOLT (M6X1X12-MM)
31.	8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
32.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
33.	9R-2807	[1]	CLIP (RETAINER)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37120263

211-4254: WIRING GP-TRANSMISSION CONTROL

WIRING GP-TRANSMISSION CONTROL

211-4254 WIRING GP-TRANSMISSION CONTROL -AUTOSHIFT, STANDARD SHIFT
S/N BXE1-UP
PART OF 230-1365, 230-1367 POWER TRAIN AR
AN ATTACHMENT

i02170149 SEBP3712

2114254 WIRING GP-TRANSMISSION CONTROL Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[9]	STRAP-CABLE
2.	164-1368	[8]	FASTENER (CLIP)
3.	206-2423	[1]	SADDLE-MOUNTING
4.	213-6096	[1]	HARNESS AS-PANEL (AUTOSHIFT, STAND SHIFT SWITCH)
	228-5856	[1]	CONNECTOR (10-PIN)
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[5]	STRAP-CABLE (WHITE)
	091-2436	[6]	TERMINAL-BLADE (18-GA TO 22-GA)
5.	214-4691	[1]	SWITCH AS-ROCKER (AUTOSHIFT, STANDARD SHIFT)
	111-7899	[1]	GASKET
6.	225-7959	[1]	HARNESS AS-WIRING (AUTOSHIFT)
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[12]	PLUG-SEAL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[7]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[6]	STRAP-CABLE (WHITE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
7.	232-1545	[1]	PLATE AS
8.	246-8052	[1]	HARNESS AS-TRANSMISSION (AUTOSHIFT)
	9X-3401	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[1]	PLUG-SEAL
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[16]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
9.	261-2208	[1]	CONTROL GP-TRANSMISSION (FORWARD, NEUTRAL, REVERSE)
10.	274-9993	[1]	PLATE
11.	095-0756 M	[4]	SCREW-MACHINE (M5X0.8X16-MM)
12.	3S-2093	[5]	STRAP-CABLE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37120264

263-9487: WIRING GP-TRANSMISSION CONTROL

WIRING GP-TRANSMISSION CONTROL

263-9487 WIRING GP-TRANSMISSION CONTROL
S/N BXE1-UP
PART OF 230-1362, 230-1363, 230-1365, 230-1366, 230-1367 POWER TRAIN AR
AN ATTACHMENT

i02412238 SEBP3712

2639487 WIRING GP-TRANSMISSION CONTROL Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	268-7755	[1]	HARNESS AS-SOLENOID (TRANSMISSION)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[3]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	180-9340	[10]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[22]	STRAP-CABLE (WHITE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
3.	3S-2093	[5]	STRAP-CABLE
	E		ORDER BY THE CENTIMETER

#SEBP37120265

211-4257: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

211-4257 WIRING GP-WORK TOOL
S/N BXE1-561
PART OF 230-4948, 230-4949 VALVE AR-BANK 3
AN ATTACHMENT

i02166400 SEBP3712

2114257 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-8704	[5]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	213-6075	[1]	HARNESS AS-CAB
	091-2436	[19]	TERMINAL-BLADE (18-GA TO 22-GA)
	122-4401	[3]	TERMINAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[19]	STRAP-CABLE (WHITE)
3.	213-6076	[1]	HARNESS AS-PLATFORM
	9X-1055	[2]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES HARNESS AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8L-8413	[27]	STRAP-CABLE (WHITE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
4.	213-6077	[1]	HARNESS AS-FRONT
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[3]	STRAP-CABLE (WHITE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	214-4706	[1]	SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW)
6.	214-4707	[1]	SWITCH AS-ROCKER
7.	214-4708	[1]	SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK)
8.	3S-2093	[43]	STRAP-CABLE
9.	160-2246 G		SLEEVE-ABRASION (10-IN)
10.	115-1615	[1]	RELAY AS (12-VOLT)
11.	3S-8665	[2]	CLIP (LOOP)
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH

#SEBP37120266

211-4257: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

211-4257 WIRING GP-WORK TOOL
S/N BXE562-2199
PART OF 230-4948, 230-4949 VALVE AR-BANK 3
AN ATTACHMENT

i02604834 SEBP3712

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-8704	[5]	SUPPRESSOR AS-ARC
2.	213-6075	[1]	HARNESS AS-CAB
	228-5856	[4]	CONNECTOR (10-PIN)
	186-3735	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[14]	STRAP-CABLE (WHITE)
	122-4401	[3]	TERMINAL
	091-2436	[19]	TERMINAL-BLADE (18-GA TO 22-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
3.	213-6076	[1]	HARNESS AS-PLATFORM
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[4]	PLUG-SEAL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3736	[19]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	180-9340	[9]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[31]	STRAP-CABLE (WHITE)
	189-3158	[5]	SUPPRESSOR-ARC
	9X-1055	[2]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
4.	213-6077	[1]	HARNESS AS-FRONT
	5P-0767 E		HOSE (541-CM)
	9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[10]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[2]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[3]	STRAP-CABLE (WHITE)
5.	214-4706	[1]	SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW)
6.	214-4707	[1]	SWITCH AS-ROCKER (ELECTRIC POWER)
7.	214-4708	[1]	SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK)
			(EACH SWITCH AS INCLUDES)
	111-7899	[1]	GASKET
8.	3S-2093	[33]	STRAP-CABLE
9.	3S-8665 C	[3]	CLIP (LOOP)
10.	115-1615	[1]	RELAY AS (12-VOLT)
11.	160-2246 CG		SLEEVE-ABRASION (10-IN)
11A.	160-2246 CG		SLEEVE-ABRASION (12-IN)
12.	6K-0806	[2]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH

#SEBP37120267

211-4258: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

211-4258 WIRING GP-WORK TOOL -ANGLE BROOM
S/N BXE1-UP
AN ATTACHMENT

i02170602 SEBP3712

2114258 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	159-9495	[1]	NUT (1-1/2-18-THD)
2.	159-9496	[1]	LOCKWASHER
3.	211-9461	[1]	HARNESS AS-WIRING (ANGLE BROOM)
	7N-7779	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	7N-7780	[2]	PIN-CONNECTOR (14-GA TO 18-GA)
	7N-7781	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
	7N-7782	[1]	HOUSING-PLUG (14-GA TO 18-GA)
	8T-8737	[4]	PLUG-SEAL
	9G-2265	[1]	CLIP
	9G-3695	[3]	PLUG-SEAL
	186-3736	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	156-1458	[1]	COVER
	156-1460	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
4.	212-7038	[1]	BRACKET
5.	214-4705	[1]	SWITCH AS-ROCKER (ANGLE BROOM)
	111-7899	[1]	GASKET
6.	3S-2093	[2]	STRAP-CABLE
7.	4P-7581	[1]	CLIP (LADDER)
8.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37120268

296-0376: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

296-0376 WIRING GP-WORK TOOL
S/N BXE2200-UP
PART OF 230-4948, 230-4949 VALVE AR-BANK 3
AN ATTACHMENT

i02767643 SEBP3712

2960376 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	189-3158	[5]	SUPPRESSOR-ARC
2.	213-6077	[1]	HARNESS AS-FRONT (LOADER)
	5P-0767 E		HOSE (541-CM)
	9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[10]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[2]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[3]	STRAP-CABLE (WHITE)
3.	214-4706	[1]	SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW)
4.	214-4707	[1]	SWITCH AS-ROCKER (ELECTRIC POWER)
5.	214-4708	[1]	SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK)
			(EACH SWITCH AS-ROCKER INCLUDES)
	111-7899	[1]	GASKET
6.	296-0375	[1]	HARNESS AS-CAB (PLATFORM)
	228-5856	[4]	CONNECTOR (10-PIN)
	9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[4]	PLUG-SEAL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[16]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	141-8061 B		TAPE
	122-4401	[3]	TERMINAL
	091-2436	[16]	TERMINAL-BLADE (18-GA TO 22-GA)
	9X-1055	[2]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
7.	115-1615	[1]	RELAY AS (12-VOLT)(QUICK COUPLER)
8.	3S-2093	[36]	STRAP-CABLE
9.	3S-8665	[2]	CLIP (LOOP)
10.	149-7372 E		SLEEVE-ABRASION (55-CM)
11.	6V-0744 E		GUARD-HOSE (65-CM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#SEBP37120269

230-5740: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

230-5740 AXLE GP-DRIVE & STEERING -REAR
S/N BXE1-UP
PART OF 218-3341 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i02163434 SEBP3712

2305740 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-0652	[1]	CLIP (PIN)
2.	199-0668	[2]	BUSHING
3.	197-9155	[1]	BREATHER (DRIVE AXLE)
4.	199-0670	[2]	SCREW-PURGE
5.	198-7811	[2]	DOWEL
6.	198-7815	[2]	BUSHING
7.	152-6144	[4]	PLUG AS-DRAIN (MAGNETIC)
			(EACH INCLUDES)
	6V-6228	[1]	SEAL-O-RING
8.	199-0676	[2]	SPRING
9.	199-0679 M	[2]	BOLT (M16X2X95-MM)(BRAKE)
10.	199-0683 M	[16]	BOLT (M16X2X38-MM)
11.	199-0706	[1]	PISTON
12.	198-7822	[2]	SEAL
13.	199-0786	[8]	PLATE
14.	199-0787	[6]	PIN
15.	198-7835 M	[2]	NUT-TIE ROD (M27X1.5-THD)
16.	210-3106	[1]	BRACKET
17.	213-4227	[2]	RETAINER
18.	212-5713	[2]	PLUG AS
			(EACH INCLUDES)
	033-6041	[1]	SEAL-O-RING
19.	213-4223	[2]	WASHER (57X66X8.5-MM THK)
20.	216-1610 Y	[2]	PLANETARY GP-FINAL DRIVE
21.	216-7473	[2]	PIN AS
			(EACH INCLUDES)
	6D-1734	[1]	CUP-BEARING
	3N-4968	[1]	CONE-BEARING
	198-7825	[1]	SEAL
	198-7838	[1]	PIN
22.	216-7474	[2]	PIN AS (LOWER)
			(EACH INCLUDES)
	198-7826	[1]	SEAL
	198-7839	[1]	PIN
	217-0049	[1]	BEARING
23.	213-4225	[2]	WASHER-THRUST
24.	216-7476 Y	[1]	HOUSING & FLANGE GP-AXLE (RH)
25.	216-7477 Y	[1]	HOUSING & FLANGE GP-AXLE (LH)
26.	217-2914	[1]	COVER (DIFFERENTIAL LOCK)
27.	231-0699	[1]	COVER (DIFFERENTIAL LOCK)
28.	219-8839	[1]	ROD
29.	174-4647	[1]	BUSHING
30.	174-4650	[1]	SPACER (20X32X8-MM THK)
31.	238-5236	[1]	TIE ROD AS
	295-6358 M	[1]	NUT (M28X1.5-THD)
	316-1923	[1]	TIE ROD
	316-1924	[1]	BALL JOINT
32.	238-5237	[1]	TIE ROD AS
	295-6358 M	[1]	NUT (M28X1.5-THD)
	316-1924	[1]	BALL JOINT
	316-1928	[1]	TIE ROD
33.	238-5291	[6]	DISC-BRAKE
34.	238-5292	[2]	HUB-BRAKE
35.	312-7617	[2]	SHAFT AS
			(EACH INCLUDES)
	226-4355	[2]	SPIDER (15-TEETH)
	226-4356	[1]	SHAFT
	226-4357	[1]	YOKE
36.	253-4979	[1]	HOUSING-AXLE (RH)
37.	253-4980	[1]	HOUSING-AXLE (LH)
38.	8C-7505 M	[4]	SCREW-FLAT HEAD (M8X1.25X20-MM)
39.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
40.	095-9805 M	[3]	BOLT-SOCKET HEAD (M14X2X40-MM)
41.	4F-9029	[2]	SEAL
42.	9X-7684	[2]	SEAL-O-RING
43.	5H-4909	[2]	SEAL-O-RING (DIFFERENTIAL LOCK)
44.	8T-0292 M	[2]	BOLT (M8X1.25X90-MM)(DIFFERENTIAL LOCK)
45.	216-7478 Y	[1]	HOUSING GP-AXLE (CENTER)
46.	069-4707 B		SEALANT (GASKET)
48.	222-7108	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
49.	3J-1907	[1]	SEAL-O-RING
50.	9S-8004	[1]	PLUG (9/16-18-THD)
51.	7X-2559 M	[26]	BOLT (M16X2X160-MM)
53.	219-8795	[1]	CAP (PLASTIC)
54.	4L-6454	[2]	BOLT (3/8-16X1-IN)
55.	259-0127 JKL	[1]	BRAKE GP-MECH CALIPER PARKING
	1B-4430	[1]	NUT-JAM (1/2-20-THD)
	7X-3374	[1]	NUT-FULL (1/2-20-THD)
56.	130-7282	[1]	BRACKET
57.	238-5238 Y	[1]	CYLINDER GP-STEERING
64.	198-7841 B	[8]	SHIM (0.15-MM THK)
65.	198-7842 B	[8]	SHIM (0.2-MM THK)
66.	198-7843 B	[4]	SHIM (0.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	166-9413 J	[1]	KIT-CAM (COUNTERCLOCKWISE)(PARKING BRAKE)
			(INCLUDES CAMS, BEARINGS & RETAINER)
	259-0128 L	[1]	KIT-BRAKE LINING
			(INCLUDES LINING AS & SPRING)
	259-0129 N	[1]	KIT-BRAKE CALIPER
			(INCLUDES SLEEVES, BOLT, WASHERS, NUT, LINING AS, THRUST BEARING, BOOT, SEAL, O-RINGS & SPRING)
	B		USE AS REQUIRED
	J		KITS MARKED J SERVICES PARTS MARKED J
	K		SEE MAST AR OR LIFT GP
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders

Fuses - Replace
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Installing the Kits for a Powered Sideshift Control, an Eighth Function Auxiliary Control, and a Ninth Function Auxiliary Control{1408, 5051, 5057, 5705, 5808}
Installing the Kits for a Powered Sideshift Control, an Eighth Function Auxiliary Control, and a Ninth Function Auxiliary Control{1408, 5051, 5057, 5705, 5808}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Technical Information Bulletin

Failed Service Meters{7478}
Failed Service Meters{7478}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3054C Engines for Caterpillar Built Machines

Electrical Connector - Inspect
AccuGrade^® Laser

Wiring Harness (Open Circuit) - Test
AccuGrade^® Laser

Wiring Harness (Short Circuit) - Test
AccuGrade^® Laser

Connector Contact Description
AccuGrade^® Laser

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Wiring Harness (Short Circuit) - Test
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Wiring Harness (Open Circuit) - Test
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Electrical Connector - Inspect
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0368 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0368 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1187 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1956 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1956 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1956 - FMI 08
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1957 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1957 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1957 - FMI 08
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1958 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1958 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1958 - FMI 08
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1959 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1959 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1959 - FMI 08
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 2108 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 2108 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 2108 - FMI 08
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0490 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0490 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 2108 - FMI 13
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Connector Contact Description
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0600 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0600 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 2108 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1959 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1958 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1957 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1956 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0191 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0367 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0629 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0626 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1187 - FMI 03
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1529 - FMI 02
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 1529 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Switch Circuits
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Power Supply Circuit of Electronic Control Module
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Connector Locations
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Electrical Power Supply
AccuGrade^® Laser

MID 053 - CID 0820 - FMI 07
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 053 - CID 2652 - FMI 05
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 053 - CID 2652 - FMI 06
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

MID 039 - CID 0368 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Improved Tubes Allow More Clearance for the ECM Harness {1408, 5057}
2006/08/28

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

An Improved Hydraulic Lockout Switch is Available for Backhoe Loaders {1408}
2007/12/03

Inspect the Harness Connector When You Replace the Column Switch {1408}
2008/02/25

An Improved Temperature Sender is Now Available for Certain Backhoe Loaders {1408}
2008/03/10

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Updated Ride Control Pressure Switch Now Available for Certain Backhoe Loaders {1408}
2011/11/23

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

A New Flasher Relay is Used on Certain Backhoe Loaders and Certain Compact Wheel Loaders {1408, 4493}
2012/09/26

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

The Lockable Switches on E and F Series Backhoe Loaders Has Been Improved {1408}
2014/10/15

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 432E :

305-4171 WIRING GP-RIDE CONTROL

246-8056 WIRING GP-RIDE CONTROL

211-4259 WIRING GP-RIDE CONTROL

295-1722 WIRING GP-REAR

211-4252 WIRING GP-REAR

295-1713 WIRING GP-PLATFORM

211-4240 WIRING GP-PLATFORM

225-7996 WIRING GP-STABILIZER

211-4266 WIRING GP-STEERING

211-4254 WIRING GP-TRANSMISSION CONTROL

263-9487 WIRING GP-TRANSMISSION CONTROL

211-4257 WIRING GP-WORK TOOL

211-4258 WIRING GP-WORK TOOL

296-0376 WIRING GP-WORK TOOL

Truck sale:

Caterpillar 432E
- backhoe loader
CAVPOWER

43,510

Caterpillar 432E, backhoe loader, Construction

52,489

Caterpillar 432E, backhoe loader, Construction

CAVPOWER

40.122

Caterpillar 432E, graaf-laadcombinaties, Bouw

BERGERAT MONNOYEUR SP. Z O.O.

45.557

Caterpillar 432E, graaf-laadcombinaties, Bouw
- backhoe loader
WILLIAM ADAMS PTY. LTD.