268-9049 CYLINDER GP-BOOM S/N BXE1-UP PART OF 229-3062, 229-3063, 229-3066 BACKHOE AR-EXTENDABLE STICK, 229-3056, 229-3057 BACKHOE AR-STANDARD STICK AN ATTACHMENT 432E

HYDRAULIC SYSTEM

CYLINDER GP

0. 268-9049 CYLINDER G
1. 190-3085 CYLINDER G
2. 210-7097 CYLINDER G
3. 210-7098 CYLINDER G
4. 214-9373 CYLINDER G
5. 185-1839 CYLINDER G
6. 226-5540 CYLINDER G
7. 173-4565 CYLINDER G
8. 210-7083 CYLINDER G
9. 210-7084 CYLINDER G
0. INFORMATION

BACKHOE LOADER 432E BACKHOE LOADER BXE
432E Backhoe Loader Parallel Lift Side Shift Boom BXE00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3712 432E BXE (2005)

HYDRAULIC SYSTEM

CYLINDER GP

210-7086 CYLINDER GP-BACKHOE BUCKET

210-7076 CYLINDER GP-BOOM

268-9049 CYLINDER GP-BOOM

190-3085 CYLINDER GP-COUPLER

210-7097 CYLINDER GP-EXTENDABLE STICK

210-7098 CYLINDER GP-EXTENDABLE STICK

#SEBP37120540

268-9049: CYLINDER GP-BOOM

CYLINDER GP-BOOM

268-9049 CYLINDER GP-BOOM
S/N BXE1-UP
PART OF 229-3062, 229-3063, 229-3066 BACKHOE AR-EXTENDABLE STICK, 229-3056, 229-3057 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i02412088 SEBP3712

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-2244	[1]	GROMMET
3.	167-2202 J	[1]	SEAL AS-BUFFER
4.	212-0907	[1]	PLATE-CONNECTOR
5.	217-3312	[1]	MAGNET
6.	246-9113	[1]	RETAINER
7.	273-9412	[1]	HEAD
8.	273-9413	[1]	PISTON
9.	273-9416	[1]	ROD AS
9A.	326-3362	[1]	BUSHING
10.	273-9418	[1]	CYLINDER AS
	212-8960	[2]	BEARING
	6V-9746	[1]	SEAL-O-RING
	203-7807	[1]	ELBOW
11.	274-5231	[1]	PLUNGER
12.	276-1816	[1]	GUARD
13.	300-7930 J	[1]	RING-RETAINING
14.	305-0042	[1]	SETSCREW
15.	309-6232	[1]	COVER
16.	095-1543 J	[1]	SEAL-O-RING
17.	095-1608 J	[1]	SEAL-O-RING
18.	167-2310 J	[1]	SEAL-U-CUP
19.	175-7902 J	[1]	SEAL-O-RING
20.	175-7903 J	[1]	SEAL-O-RING
21.	188-2199 J	[1]	SEAL-O-RING
22.	212-1490	[1]	SENSOR GP-POSITION
23.	215-1942 J	[1]	RING-BACKUP
24.	231-3540 J	[1]	SEAL-WIPER
25.	2J-3961 J	[1]	RING-BACKUP
26.	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
27.	3V-2431	[2]	WASHER (10.2X16X2-MM THK)
28.	4S-5565	[2]	BOLT (3/8-16X0.875-IN)
30.	4T-8588 J	[1]	SEAL AS
31.	6S-3146	[1]	WASHER-SEALING
32.	8T-8390 J	[1]	RING-WEAR
33.	8T-8737	[1]	PLUG-SEAL
34.	9X-7260 J	[1]	RING-WEAR
35.	9X-1386 E		SLEEVE (14-CM)

			AVAILABLE REPAIR KIT(S):
	381-2732 J	[1]	KIT-HYD CYLINDER SEAL (BOOM)
			-OR-
	397-5704 J	[1]	KIT-HYD CYLINDER SEAL (BOOM)
			(FOR USE WITH REHS1392 FOUND IN SISWEB)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP37120541

190-3085: CYLINDER GP-COUPLER

CYLINDER GP-COUPLER

190-3085 CYLINDER GP-COUPLER
S/N BXE1-UP
PART OF 301-2318 KIT-QUICK COUPLER, 246-5298 LINES GP-COUPLER, 297-9655 LINES GP-HYDRAULIC
AN ATTACHMENT

i01676425 SEBP3712

1903085 CYLINDER GP-COUPLER Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-3893	[2]	ROD
2.	190-3611	[1]	VALVE AS-CHECK (COUPLER CYLINDER)

			AVAILABLE REPAIR KIT(S):
	180-9872	[1]	KIT-SEAL (COUPLER CYLINDER)
			(INCLUDES LOCKNUT, SEALS, RINGS & RETAINER)

#SEBP37120542

210-7097: CYLINDER GP-EXTENDABLE STICK

CYLINDER GP-EXTENDABLE STICK

210-7097 CYLINDER GP-EXTENDABLE STICK
S/N BXE1-UP
76.2-MM (3.0-IN) BORE X 1164-MM (46.8-IN) STROKE
PART OF 209-1615, 213-9687 STICK GP-EXTENDABLE
AN ATTACHMENT

i02164824 SEBP3712

2107097 CYLINDER GP-EXTENDABLE STICK Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-1386 E		SLEEVE (1-CM)
2.	102-2244 J	[1]	GROMMET
3.	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4.	191-6159	[1]	HEAD
5.	214-6471	[1]	CYLINDER AS
	6V-8398	[1]	SEAL-O-RING
	095-0879	[1]	PIN-SPRING
6.	214-6475	[1]	ROD AS
7.	214-6480	[1]	PISTON
8.	214-6879	[1]	COVER
9.	214-6897	[1]	PLATE
10.	217-3311	[1]	MAGNET (RING)
11.	5Y-0974	[3]	SCREW-BUTTON HEAD (1/4-20X0.5-IN)
12.	230-5580	[1]	SCREW-BUTTON HEAD (10-32X0.25-IN)
13.	242-9514	[1]	CARRIER
14.	242-9515 J	[1]	RING-RETAINING
15.	167-2186 J	[1]	SEAL AS-BUFFER
16.	167-2294 J	[1]	SEAL-U-CUP
17.	188-2199 J	[1]	SEAL-O-RING
18.	1H-7339 J	[1]	SEAL-O-RING
19.	215-1942 J	[1]	RING-BACKUP
20.	215-8934	[1]	SENSOR GP-POSITION (CYLINDER)
21.	223-3353 J	[1]	RING-WEAR
22.	226-8202 J	[1]	SEAL-WIPER
23.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
24.	4T-6780 J	[1]	RING-WEAR
25.	6J-2680 J	[1]	SEAL-O-RING
26.	5J-4561	[1]	LOCKNUT (1-14-THD)
28.	6J-5731 J	[1]	RING-BACKUP
29.	8T-5070	[1]	SETSCREW-SOCKET (3/8-16X0.5-IN)
30.	8T-8737	[3]	PLUG-SEAL

			AVAILABLE REPAIR KIT(S):
	380-9614 J	[1]	KIT-HYDRAULIC CYLINDER SEAL
			(ALSO INCLUDES SEAL AS)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP37120543

210-7098: CYLINDER GP-EXTENDABLE STICK

CYLINDER GP-EXTENDABLE STICK

210-7098 CYLINDER GP-EXTENDABLE STICK -EXTENDABLE
S/N BXE1-UP
76.2-MM (3-IN) BORE X 1164-MM (45.8-IN) STROKE
PART OF 214-6079, 214-6081, 325-7513 STICK GP-EXTENDABLE
AN ATTACHMENT

i02150145 SEBP3712

2107098 CYLINDER GP-EXTENDABLE STICK Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	191-6159	[1]	HEAD
2.	215-7457	[1]	ROD AS
3.	215-7460	[1]	CYLINDER AS
	6V-8398	[1]	SEAL-O-RING
4.	229-8911	[1]	PISTON
5.	167-2186 J	[1]	SEAL AS-BUFFER
6.	167-2294 J	[1]	SEAL-U-CUP
7.	173-9779 M	[1]	BOLT (M24X3X80-MM)
8.	1H-7339 J	[1]	SEAL-O-RING
9.	223-3353 J	[1]	RING-WEAR
10.	226-8202 J	[1]	SEAL-WIPER
11.	4T-6780 J	[1]	RING-WEAR
12.	6J-2680 J	[1]	SEAL-O-RING
13.	6J-1972 J	[1]	SEAL AS
14.	6J-5731 J	[1]	RING-BACKUP
15.	6V-8237	[1]	WASHER (26X44X4-MM THK)

			AVAILABLE REPAIR KIT(S):
	338-7156 J	[1]	KIT-HYD CYLINDER SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP37120544

214-9373: CYLINDER GP-LIFT

CYLINDER GP-LIFT

214-9373 CYLINDER GP-LIFT
S/N BXE1-UP
85-MM (3.3-IN) BORE X 704.3-MM (27.7-IN) STROKE
PART OF 227-8396 LOADER AR

i02162838 SEBP3712

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-2110	[1]	ROD AS
1A.	9R-0321	[2]	BUSHING
2.	185-1502	[1]	PISTON
3.	192-3849	[1]	HEAD
4.	215-1514	[1]	CYLINDER AS
4A.	7J-9108	[1]	SEAL-O-RING
4B.	9R-0153	[2]	BUSHING
4C.	203-7805	[1]	ELBOW
5.	141-0711 J	[1]	RING-WEAR
6.	289-2935 J	[1]	SEAL AS-BUFFER
7.	289-2946 J	[1]	SEAL-U-CUP
8.	173-9683 M	[1]	BOLT (M30X3.5X90-MM)
9.	161-7149 J	[1]	SEAL-PISTON
10.	1H-7339 J	[1]	SEAL-O-RING
11.	308-1845 J	[1]	SEAL-WIPER
12.	2H-6338 J	[1]	SEAL-O-RING
13.	4T-5613 J	[1]	RING-WEAR
14.	8J-2574 J	[1]	RING-BACKUP
15.	9X-8399	[1]	WASHER (33X56X6-MM THK)
16.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)

			AVAILABLE REPAIR KIT(S):
	379-0117 J	[1]	KIT-HYD CYLINDER SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP37120545

185-1839: CYLINDER GP-MULTIPURPOSE BUKT

CYLINDER GP-MULTIPURPOSE BUKT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT
S/N BXE1-UP
76.2-MM (2.99-IN) BORE X 262-MM (10.31-IN) STROKE
PART OF 163-4284, 252-9058, 252-9062, 252-9065, 252-9067, 255-9091 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT

i01421820 SEBP3712

1851839 CYLINDER GP-MULTIPURPOSE BUKT Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-0122	[1]	HEAD
2.	9T-2212	[1]	PISTON
3.	9T-4008	[1]	ROD AS
3A.	9T-4007	[2]	BEARING
4.	9T-4009	[1]	CYLINDER AS
5.	167-2186 J	[1]	SEAL AS-BUFFER
6.	167-2294 J	[1]	SEAL-U-CUP
7.	1H-7339 J	[1]	SEAL-O-RING
8.	226-8202 J	[1]	SEAL-WIPER
9.	4T-6780 J	[1]	RING-WEAR
10.	5P-8250	[1]	WASHER (28X49X5-MM THK)
11.	6F-7037	[1]	BOLT (1-14X3.25-IN)
12.	6J-1972 J	[1]	SEAL AS
13.	6J-5733 J	[1]	RING-WEAR
14.	8J-2574 J	[1]	RING-BACKUP

			AVAILABLE REPAIR KIT(S):
	235-0354 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(ALSO INCLUDES BACKUP RING)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37120546

226-5540: CYLINDER GP-MULTIPURPOSE BUKT

CYLINDER GP-MULTIPURPOSE BUKT

226-5540 CYLINDER GP-MULTIPURPOSE BUKT
S/N BXE1-UP
76-MM (2.99-IN) BORE X 262-MM (10.31-IN) STROKE
PART OF 318-7246, 318-7247, 318-7248, 318-7251, 320-9948, 320-9950 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT

i02983289 SEBP3712

2265540 CYLINDER GP-MULTIPURPOSE BUKT Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
2.	9S-8004	[2]	PLUG (9/16-18-THD)
3.	3J-1907	[2]	SEAL-O-RING
4.	9T-4007	[2]	BEARING

			AVAILABLE REPAIR KIT(S):
	230-9357	[1]	KIT-SEAL (BUCKET CYLINDER)
			(INCLUDES WIPER SEAL, O-RINGS, MOISTURE EXCLUDER, POLYPAK, WEAR RINGS, O-RING LOADER & PISTON RING))

#SEBP37120547

173-4565: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

173-4565 CYLINDER GP-STABILIZER
S/N BXE1-UP
70-MM (2.76-IN) BORE X 760-MM (29.92-IN) STROKE
PART OF 268-6456 HYDRAULIC AR

i01228325 SEBP3712

1734565 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-6951	[1]	CYLINDER AS
	9R-7215	[1]	BEARING
2.	5B-9385	[1]	BOLT (1-14X2.5-IN)
3.	5P-8250	[1]	WASHER (28X49X5-MM THK)
4.	8J-0112	[1]	RING-WEAR
5.	5J-7010	[1]	SEAL AS
6.	9T-0805	[1]	PISTON
7.	175-7895	[1]	SEAL-O-RING
8.	4J-9225	[1]	RING-BACKUP
9.	151-5349	[1]	HEAD
10.	126-6953	[1]	ROD AS
11.	4T-6907	[1]	RING-WEAR
12.	167-2300	[1]	SEAL-U-CUP
13.	167-2191	[1]	SEAL AS-BUFFER
14.	231-3539	[1]	SEAL-WIPER

#SEBP37120548

210-7083: CYLINDER GP-STICK

CYLINDER GP-STICK

210-7083 CYLINDER GP-STICK
S/N BXE1-UP
120.65-MM (4.7-IN) BORE X 706-MM (27.8-IN) STROKE
PART OF 229-3062, 229-3063, 229-3066 BACKHOE AR-EXTENDABLE STICK, 229-3056, 229-3057 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i02164656 SEBP3712

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5U-6605	[1]	PLUG
2.	8T-8737	[1]	PLUG-SEAL
3.	212-0469	[1]	CYLINDER AS
	6V-8398	[1]	SEAL-O-RING
4.	212-0907	[1]	PLATE-CONNECTOR
5.	217-3312	[1]	MAGNET
6.	276-1816	[1]	GUARD
7.	223-3360	[1]	RING-WEAR
8.	228-8062	[1]	ROD AS
9.	246-9113	[1]	RETAINER
10.	252-5833	[1]	HEAD
11.	252-9732	[1]	PISTON
12.	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
13.	146-0742	[1]	RING-WEAR
14.	167-2204	[1]	SEAL AS-BUFFER
15.	167-2314	[1]	SEAL-U-CUP
16.	175-7902	[1]	SEAL-O-RING
17.	175-7903	[1]	SEAL-O-RING
18.	188-2199	[1]	SEAL-O-RING
19.	215-1942	[1]	RING-BACKUP
20.	217-5776	[1]	SENSOR GP-POSITION (LINEAR)
21.	227-1148	[1]	SEAL-WIPER
22.	2J-3961	[1]	RING-BACKUP
23.	3V-2431	[2]	WASHER (10.2X16X2-MM THK)
24.	4S-5565	[2]	BOLT (3/8-16X0.875-IN)
25.	4T-8588	[2]	SEAL AS
26.	8T-5070	[1]	SETSCREW-SOCKET (3/8-16X0.5-IN)
27.	9X-1386 E		SLEEVE (4.2-CM)
28.	9X-1386 E		SLEEVE (8.5-CM)
	E		ORDER BY THE CENTIMETER

#SEBP37120549

210-7084: CYLINDER GP-STICK

CYLINDER GP-STICK

210-7084 CYLINDER GP-STICK
S/N BXE1-UP
120.65-MM (4.7-IN) BORE X 706-MM (27.8-IN) STROKE
PART OF 229-3034, 229-3035, 305-4342, 305-4344, 305-4345, 325-7514 BACKHOE AR-EXTENDABLE STICK, 229-3028, 229-3029, 305-4343, 305-4346 BACKHOE AR-STANDARD STICK, 229-3038 BACKHOE GP-EXTENDABLE STICK
AN ATTACHMENT

i02173426 SEBP3712

For full view, you need register

Parts for your 432E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-0465	[1]	CYLINDER AS
1A.	215-1906	[2]	BUSHING
	6V-8398	[1]	SEAL-O-RING
2.	223-3360 J	[1]	RING-WEAR
3.	228-8017	[1]	ROD AS
3A.	213-6682	[2]	BUSHING
4.	252-5832	[1]	PISTON
5.	252-5833	[1]	HEAD
6.	146-0742	[1]	RING-WEAR
7.	167-2204 J	[1]	SEAL AS-BUFFER
8.	167-2314 J	[1]	SEAL-U-CUP
9.	175-7902	[1]	SEAL-O-RING
10.	175-7903 J	[1]	SEAL-O-RING
11.	227-1148 J	[1]	SEAL-WIPER
12.	2J-0564 J	[1]	LOCKNUT (2-12-THD)
13.	2J-3961	[1]	RING-BACKUP
14.	4T-8588 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	365-1270 J	[1]	KIT-HYD CYLINDER SEAL
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders

Lift Cylinder Brace - Connect and Disconnect
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM TO REPLACE POROUS SIDESHIFT LOCK CYLINDERS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM TO REPLACE POROUS SIDESHIFT LOCK CYLINDERS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STABILIZER CYLINDER TUBES AND RELATED HARDWARE ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STABILIZER CYLINDER TUBES AND RELATED HARDWARE ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER PISTON ON CERTAIN 416E, 422E, 428E, 432E, AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER PISTON ON CERTAIN 416E, 422E, 428E, 432E, AND 434E BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED SWING CYLINDER ON CERTAIN 416E, 416E ST, 420E, 420E PL, 420E ST, 422E, 428E, 430E, 430E IT, 430E ST, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED SWING CYLINDER ON CERTAIN 416E, 416E ST, 420E, 420E PL, 420E ST, 422E, 428E, 430E, 430E IT, 430E ST, 432E, 434E, 442E, AND 444E BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING ROD ASSEMBLIES ON THE BUCKET CYLINDER ON CERTAIN 416E, 420E, 422E, 428E, 432E, AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING ROD ASSEMBLIES ON THE BUCKET CYLINDER ON CERTAIN 416E, 420E, 422E, 428E, 432E, AND 434E BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON OR ROD SEAL ON BUCKET CYLINDERS ON CERTAIN 416E, 416E ST, 420E, 420E PL, 420E ST, 422E, 428E, 432E, AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON OR ROD SEAL ON BUCKET CYLINDERS ON CERTAIN 416E, 416E ST, 420E, 420E PL, 420E ST, 422E, 428E, 432E, AND 434E BACKHOE LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Warranty Information Changes for Cylinder Rod of the Swing on the Backhoe Loader{5105}
Warranty Information Changes for Cylinder Rod of the Swing on the Backhoe Loader{5105}

Backhoe Loader Cylinder Rods are Scored or Pitted{5456}
Backhoe Loader Cylinder Rods are Scored or Pitted{5456}

Leaks on E Series Backhoe Loader Multi-Purpose Bucket Cylinders{5457}
Leaks on E Series Backhoe Loader Multi-Purpose Bucket Cylinders{5457}

Specifications

Tilt Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Lift Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Backhoe)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Stick Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Extendable Stick Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Swing Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Multipurpose Bucket Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Sideshift Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Swing Cylinder
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Stabilizer Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Backhoe Bucket Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Stick Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Boom Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Extendable Stick Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Stick - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Swing Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Sensors - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Lift Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Tilt Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems

Service Magazine

Improved Casting Improves Reliability {5804, 6508}
2006/12/25

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Operation and Maintenance Manuals Are Updated to Include Maintenance Procedure for Cylinders and a Note Regarding Backhoe Bucket Interference {5102, 5105, 5468, 5808, 6119, 7000, 7222}
2008/12/29

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

An Improved Bucket Cylinder is Being Used On Certain Backhoe Loaders {5457}
2009/08/03

An Improved Seal is Being Used on Loader Lift Cylinders on Certain Backhoe Loaders {5102, 7555}
2011/08/12

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

A New Swing Cylinder Provides Improved Durability and Reliability on Certain Backhoe Loader Machines {7562}
2010/12/09

New High Performance Seals are Available for Certain Backhoe Loaders {5457}
2011/12/14

New High Performance Seals are Available for Certain Backhoe Loaders {5456}
2011/11/16

Caterpillar Parts SIS Catalog 432E :

210-7076 CYLINDER GP-BOOM

210-7086 CYLINDER GP-BACKHOE BUCKET

210-7085 CYLINDER GP-BACKHOE BUCKET

303-8537 CONTROL AR-RIDE

303-8536 CONTROL AR-RIDE

252-4663 CONTROL AR-RIDE

215-1505 CONTROL AR-RIDE

162-3961 ACCUMULATOR GP-RIDE CONTROL

190-3085 CYLINDER GP-COUPLER

210-7097 CYLINDER GP-EXTENDABLE STICK

210-7098 CYLINDER GP-EXTENDABLE STICK

214-9373 CYLINDER GP-LIFT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT

226-5540 CYLINDER GP-MULTIPURPOSE BUKT

173-4565 CYLINDER GP-STABILIZER

210-7083 CYLINDER GP-STICK

Truck sale:

Caterpillar 432E
- backhoe loader
CAVPOWER

43,510

Caterpillar 432E, backhoe loader, Construction

52,489

Caterpillar 432E, backhoe loader, Construction

CAVPOWER

40.122

Caterpillar 432E, graaf-laadcombinaties, Bouw

BERGERAT MONNOYEUR SP. Z O.O.

45.557

Caterpillar 432E, graaf-laadcombinaties, Bouw
- backhoe loader
WILLIAM ADAMS PTY. LTD.