AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

305-4172 WIRING GP-RIDE CONTROL S/N FSH1-UP PART OF 303-8537 CONTROL AR-RIDE AN ATTACHMENT 434E BACKHOE LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

BACKHOE LOADER 434E BACKHOE LOADER FSH
 434E Backhoe Loader Parallel Lift Side Shift Boom FSH00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3713 434E FSH   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-RIDE CONTROL
246-8056 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
305-4171 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
305-4172 WIRING GP-RIDE CONTROL
WIRING GP-STABILIZER
225-7996 WIRING GP-STABILIZER
WIRING GP-STEERING
211-4266 WIRING GP-STEERING
WIRING GP-STEERING
296-0378 WIRING GP-STEERING
 

#SEBP37130230
 

305-4172: WIRING GP-RIDE CONTROL

305-4172 WIRING GP-RIDE CONTROL
S/N FSH1-UP
PART OF 303-8537 CONTROL AR-RIDE
AN ATTACHMENT
i02699586 SEBP3713
3054172 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 106-8704 [3] SUPPRESSOR AS-ARC  
3. 146-9439 [1] RELAY AS (12-VOLT)  
4. 213-6064 [1] HARNESS AS-CHASSIS (LOAD CONTROL)  
5. 246-8038 [1] HARNESS AS-CONTROL (RIDE)  
6. 253-9396 [1] SWITCH AS-ROCKER (RIDE CONTROL, LOAD CONTROL)(RIDE CONTROL)  
7. 304-5696 [1] SWITCH AS-PRESSURE (LIFT CYLINDER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 115-1615 [2] RELAY AS (12-VOLT)  
9. 3J-1907 [1] SEAL-O-RING  
10. 3S-2093 [11] STRAP-CABLE  
11. 4P-7581 [1] CLIP (LADDER)  
 

#SEBP37130231
 

225-7996: WIRING GP-STABILIZER

225-7996 WIRING GP-STABILIZER
S/N FSH1-899
PART OF 253-1055 VALVE GP-PILOT
AN ATTACHMENT
i02416774 SEBP3713
2257996 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-7833 [1] WIRE AS (18-GA)  
2. 173-7003 [1] RELAY AS-TIMER  
 

#SEBP37130232
 

211-4266: WIRING GP-STEERING

211-4266 WIRING GP-STEERING
S/N FSH1-UP
PART OF 218-3342 DRIVE AR-BACKHOE LOADER
i02163449 SEBP3713
2114266 WIRING GP-STEERING Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 106-8704 [6] SUPPRESSOR AS-ARC  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 107-9677 [1] SENSOR AS-POSITION (ALL WHEEL STEER)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 115-1615 [3] RELAY AS (12-VOLT)(FUEL INJECTION)  
5. 128-5091 [1] SWITCH AS-PRESSURE (BRAKE SYSTEM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 206-1709 [1] HOUSING-GAUGE  
7. 213-6081 [1] HARNESS AS-PLATFORM  
  8L-8413 [29] STRAP-CABLE (WHITE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 213-6082 [1] HARNESS AS-CAB  
  8L-8413 [14] STRAP-CABLE (WHITE)  
  091-2436 [10] TERMINAL-BLADE (18-GA TO 22-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  7N-7221 [1] TERMINAL-BLADE (18-GA TO 22-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
9. 213-6083 [1] HARNESS AS-SOLENOID  
  8L-8413 [12] STRAP-CABLE (WHITE)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  9X-1055 [6] TERMINAL-RECEPTACLE (12-GA)  
  100-5041 [8] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
  3E-5519 [2] PLUG AS-CONNECTOR (5-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (EACH PLUG KIT INCLUDES PLUG KIT, WEDGE & INTERFACE SEAL)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
10. 214-4724 [1] PLUG-ILLUMINATED  
11. 214-4727 [1] SWITCH AS-TOGGLE (ALL WHEEL STEER)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
12. 222-7106 [1] COVER  
13. 223-9079 [1] LEVER AS  
14. 223-9080 [1] CLAMP AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
15. 251-9570 [1] PLATE AS  
16. 134-2305 [1] SEAL  
17. 104-2091 [1] SCREW-FLAT HEAD (6-20X0.5-IN)  
18. 170-6307 [1] INDICATOR GP-STEERING (REAR)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
19. 175-3265 [2] SCREW (8-16X0.63-IN)  
20. 3K-0360 [1] SEAL-O-RING  
21. 3S-2093 [23] STRAP-CABLE  
22. 4P-8134 [1] CLIP (LADDER)(LADDER)  
23. 6V-9327 M [1] SETSCREW-SOCKET (M6X1-THD)  
24. 8T-0337 M [3] SCREW-MACHINE (M4X0.7X12-MM)  
25. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [1] NUT (M10X1.5-THD)  
27. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
28. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
29. 8T-4138 M [2] BOLT (M6X1X20-MM)  
30. 8T-4171 M [3] BOLT (M6X1X12-MM)  
31. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 8T-4971 M [1] BOLT (M6X1X30-MM)  
33. 9R-2807 [1] CLIP (RETAINER)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37130233
 

296-0378: WIRING GP-STEERING

296-0378 WIRING GP-STEERING
S/N FSH1-UP
PART OF 218-3342 DRIVE AR-BACKHOE LOADER
i02697892 SEBP3713
2960378 WIRING GP-STEERING Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 106-8704 [6] SUPPRESSOR AS-ARC  
3. 107-9677 [1] SENSOR AS-POSITION (ALL WHEEL STEER)  
  9X-1813 E SLEEVE (15-CM)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
4. 128-5091 [1] SWITCH AS-PRESSURE (ALL WHEEL STEER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 206-1709 [1] HOUSING-GAUGE  
6. 213-6083 [1] HARNESS AS-SOLENOID  
7. 214-4724 [1] PLUG-ILLUMINATED  
8. 214-4727 [1] SWITCH AS-TOGGLE (ALL WHEEL STEER)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
9. 222-7106 [1] COVER  
10. 223-9079 [1] LEVER AS  
11. 223-9080 [1] CLAMP AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
12. 251-9570 [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
13. 296-0377 [1] HARNESS AS-PLATFORM  
14. 297-5362 [1] HARNESS AS-DASH  
15. 104-2091 [1] SCREW-FLAT HEAD (6-20X0.5-IN)  
16. 115-1615 [3] RELAY AS (12-VOLT)  
17. 134-2305 [1] SEAL  
18. 170-6307 [1] INDICATOR GP-STEERING (REAR)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
19. 175-3265 [2] SCREW (8-16X0.63-IN)  
20. 3K-0360 [1] SEAL-O-RING  
21. 3S-2093 [23] STRAP-CABLE  
22. 4P-8134 [1] CLIP (LADDER)  
23. 6V-9327 M [1] SETSCREW-SOCKET (M6X1-THD)  
24. 8T-0337 M [3] SCREW-MACHINE (M4X0.7X12-MM)  
25. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [1] NUT (M10X1.5-THD)  
27. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
28. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
29. 8T-4138 M [2] BOLT (M6X1X20-MM)  
30. 8T-4171 M [3] BOLT (M6X1X12-MM)  
31. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 8T-4971 M [1] BOLT (M6X1X30-MM)  
33. 9R-2807 [1] CLIP (RETAINER)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37130234
 

211-4254: WIRING GP-TRANSMISSION CONTROL

211-4254 WIRING GP-TRANSMISSION CONTROL -AUTOSHIFT, STANDARD SHIFT
S/N FSH1-UP
PART OF 230-1375 POWER TRAIN AR
AN ATTACHMENT
i02170149 SEBP3713
2114254 WIRING GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [9] STRAP-CABLE  
2. 164-1368 [8] FASTENER (CLIP)  
3. 206-2423 [1] SADDLE-MOUNTING  
4. 213-6096 [1] HARNESS AS-PANEL (AUTOSHIFT, STAND SHIFT SWITCH)  
  228-5856 [1] CONNECTOR (10-PIN)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [5] STRAP-CABLE (WHITE)  
  091-2436 [6] TERMINAL-BLADE (18-GA TO 22-GA)  
5. 214-4691 [1] SWITCH AS-ROCKER (AUTOSHIFT, STANDARD SHIFT)  
  111-7899 [1] GASKET  
6. 225-7959 [1] HARNESS AS-WIRING (AUTOSHIFT)  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [12] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [7] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [6] STRAP-CABLE (WHITE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
7. 232-1545 [1] PLATE AS  
8. 246-8052 [1] HARNESS AS-TRANSMISSION (AUTOSHIFT)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [16] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
9. 261-2208 [1] CONTROL GP-TRANSMISSION (FORWARD, NEUTRAL, REVERSE)  
10. 274-9993 [1] PLATE  
11. 095-0756 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
12. 3S-2093 [5] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37130235
 

263-9487: WIRING GP-TRANSMISSION CONTROL

263-9487 WIRING GP-TRANSMISSION CONTROL
S/N FSH1-UP
PART OF 230-1374, 230-1375 POWER TRAIN AR
AN ATTACHMENT
i02412238 SEBP3713
2639487 WIRING GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 268-7755 [1] HARNESS AS-SOLENOID (TRANSMISSION)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [3] PLUG-SEAL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  180-9340 [10] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [22] STRAP-CABLE (WHITE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
3. 3S-2093 [5] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
 

#SEBP37130236
 

211-4257: WIRING GP-WORK TOOL

211-4257 WIRING GP-WORK TOOL
S/N FSH1-368
PART OF 230-5034, 230-5035 VALVE AR-BANK 3
AN ATTACHMENT
i02166400 SEBP3713
2114257 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8704 [5] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 213-6075 [1] HARNESS AS-CAB  
  091-2436 [19] TERMINAL-BLADE (18-GA TO 22-GA)  
  122-4401 [3] TERMINAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [19] STRAP-CABLE (WHITE)  
3. 213-6076 [1] HARNESS AS-PLATFORM  
  9X-1055 [2] TERMINAL-RECEPTACLE (12-GA)  
  100-5041 [2] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES HARNESS AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8L-8413 [27] STRAP-CABLE (WHITE)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
4. 213-6077 [1] HARNESS AS-FRONT  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [3] STRAP-CABLE (WHITE)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 214-4706 [1] SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW)  
6. 214-4707 [1] SWITCH AS-ROCKER  
7. 214-4708 [1] SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK)  
8. 3S-2093 [43] STRAP-CABLE  
9. 160-2246 G SLEEVE-ABRASION (10-IN)  
10. 115-1615 [1] RELAY AS (12-VOLT)  
11. 3S-8665 [2] CLIP (LOOP)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
 

#SEBP37130237
 

211-4257: WIRING GP-WORK TOOL

211-4257 WIRING GP-WORK TOOL
S/N FSH369-899
PART OF 230-5034, 230-5035 VALVE AR-BANK 3
AN ATTACHMENT
i02604834 SEBP3713
2114257 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8704 [5] SUPPRESSOR AS-ARC  
2. 213-6075 [1] HARNESS AS-CAB  
  228-5856 [4] CONNECTOR (10-PIN)  
  186-3735 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [14] STRAP-CABLE (WHITE)  
  122-4401 [3] TERMINAL  
  091-2436 [19] TERMINAL-BLADE (18-GA TO 22-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
3. 213-6076 [1] HARNESS AS-PLATFORM  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3736 [19] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  180-9340 [9] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [31] STRAP-CABLE (WHITE)  
  189-3158 [5] SUPPRESSOR-ARC  
  9X-1055 [2] TERMINAL-RECEPTACLE (12-GA)  
  100-5041 [2] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
4. 213-6077 [1] HARNESS AS-FRONT  
  5P-0767 E HOSE (541-CM)  
  9X-3401 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [10] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [3] STRAP-CABLE (WHITE)  
5. 214-4706 [1] SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW)  
6. 214-4707 [1] SWITCH AS-ROCKER (ELECTRIC POWER)  
7. 214-4708 [1] SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK)  
    (EACH SWITCH AS INCLUDES)
  111-7899 [1] GASKET  
8. 3S-2093 [33] STRAP-CABLE  
9. 3S-8665 C [3] CLIP (LOOP)  
10. 115-1615 [1] RELAY AS (12-VOLT)  
11. 160-2246 CG SLEEVE-ABRASION (10-IN)  
11A. 160-2246 CG SLEEVE-ABRASION (12-IN)  
12. 6K-0806 [2] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
 

#SEBP37130238
 

211-4258: WIRING GP-WORK TOOL

211-4258 WIRING GP-WORK TOOL -ANGLE BROOM
S/N FSH1-UP
AN ATTACHMENT
i02170602 SEBP3713
2114258 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-9495 [1] NUT (1-1/2-18-THD)  
2. 159-9496 [1] LOCKWASHER  
3. 211-9461 [1] HARNESS AS-WIRING (ANGLE BROOM)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7782 [1] HOUSING-PLUG (14-GA TO 18-GA)  
  8T-8737 [4] PLUG-SEAL  
  9G-2265 [1] CLIP  
  9G-3695 [3] PLUG-SEAL  
  186-3736 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  156-1458 [1] COVER  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
4. 212-7038 [1] BRACKET  
5. 214-4705 [1] SWITCH AS-ROCKER (ANGLE BROOM)  
  111-7899 [1] GASKET  
6. 3S-2093 [2] STRAP-CABLE  
7. 4P-7581 [1] CLIP (LADDER)  
8. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37130239
 

296-0376: WIRING GP-WORK TOOL

296-0376 WIRING GP-WORK TOOL
S/N FSH900-UP
PART OF 230-5034, 230-5035 VALVE AR-BANK 3
AN ATTACHMENT
i02767643 SEBP3713
2960376 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 434E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 189-3158 [5] SUPPRESSOR-ARC  
2. 213-6077 [1] HARNESS AS-FRONT (LOADER)  
  5P-0767 E HOSE (541-CM)  
  9X-3401 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [10] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [3] STRAP-CABLE (WHITE)  
3. 214-4706 [1] SWITCH AS-ROCKER (AUXILIARY HYDRAULIC FLOW)  
4. 214-4707 [1] SWITCH AS-ROCKER (ELECTRIC POWER)  
5. 214-4708 [1] SWITCH AS-ROCKER (QUICK COUPLER PIN LOCK)  
    (EACH SWITCH AS-ROCKER INCLUDES)
  111-7899 [1] GASKET  
6. 296-0375 [1] HARNESS AS-CAB (PLATFORM)  
  228-5856 [4] CONNECTOR (10-PIN)  
  9X-3401 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [16] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  141-8061 B TAPE  
  122-4401 [3] TERMINAL  
  091-2436 [16] TERMINAL-BLADE (18-GA TO 22-GA)  
  9X-1055 [2] TERMINAL-RECEPTACLE (12-GA)  
  100-5041 [2] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)  
7. 115-1615 [1] RELAY AS (12-VOLT)(QUICK COUPLER)  
8. 3S-2093 [36] STRAP-CABLE  
9. 3S-8665 [2] CLIP (LOOP)  
10. 149-7372 E SLEEVE-ABRASION (55-CM)  
11. 6V-0744 E GUARD-HOSE (65-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054C Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 434E :

WIRING GP-RIDE CONTROL
305-4171 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
246-8056 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
211-4259 WIRING GP-RIDE CONTROL
WIRING GP-REAR
295-1722 WIRING GP-REAR
WIRING GP-REAR
211-4252 WIRING GP-REAR
WIRING GP-PLATFORM
295-1713 WIRING GP-PLATFORM
WIRING GP-PLATFORM
295-1713 WIRING GP-PLATFORM
WIRING GP-PLATFORM
211-4240 WIRING GP-PLATFORM
WIRING GP-STABILIZER
225-7996 WIRING GP-STABILIZER
WIRING GP-STEERING
211-4266 WIRING GP-STEERING
WIRING GP-STEERING
296-0378 WIRING GP-STEERING
WIRING GP-TRANSMISSION CONTROL
211-4254 WIRING GP-TRANSMISSION CONTROL
WIRING GP-TRANSMISSION CONTROL
263-9487 WIRING GP-TRANSMISSION CONTROL
WIRING GP-WORK TOOL
211-4257 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
211-4257 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
211-4258 WIRING GP-WORK TOOL

Truck sale:

 
 
Caterpillar 434E
- backhoe loader
FINANZAUTO S.A.
 
35.073 
Caterpillar 434E, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 434E, Construction
 
Caterpillar 434E, Construction
- backhoe loader
ZEPPELIN RUSSLAND OOO
 
On Request 
Caterpillar 434EX, Construction
- backhoe loader
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain
 
 
Caterpillar 434E, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.