AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

222-4658 BATTERY & WIRING GP S/N JMB510-UP PART OF 222-4657 BATTERY & WIRING GP 365B II EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
BATTERY GP
WIRING GP
ELECTRONICS GP-ENGINE
GENERATOR GP
ELECTRONICS GP-MACHINE
GENERATOR GP

EXCAVATOR 365B II EXCAVATOR JMB
 365B Series II Excavator JMB00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3717 365B II JMB   (2001)

ELECTRICAL AND STARTING SYSTEM

BATTERY GP
BATTERY & WIRING GP
145-0539 BATTERY & WIRING GP
197-4449 BATTERY & WIRING GP
BATTERY & WIRING GP
211-3439 BATTERY & WIRING GP
222-4657 BATTERY & WIRING GP
BATTERY & WIRING GP
222-4658 BATTERY & WIRING GP
BATTERY & WIRING GP
222-4658 BATTERY & WIRING GP
BATTERY & WIRING GP
222-4658 BATTERY & WIRING GP
195-8980 ELECTRICAL AR
 

#SEBP37170150
 

222-4658: BATTERY & WIRING GP

222-4658 BATTERY & WIRING GP
S/N JMB510-UP
PART OF 222-4657 BATTERY & WIRING GP
i02307312 SEBP3717
2224658 BATTERY & WIRING GP Parts scheme 2224658 BATTERY & WIRING GP Parts scheme 2224658 BATTERY & WIRING GP Parts scheme 2224658 BATTERY & WIRING GP Parts scheme 2224658 BATTERY & WIRING GP Parts scheme 2224658 BATTERY & WIRING GP Parts scheme 2224658 BATTERY & WIRING GP Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-4836 C [16] CLIP  
2. 8T-4121 [100] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4137 CM [52] BOLT (M10X1.5X20-MM)  
4. 111-4837 [38] CLIP  
5. 4I-5426 [1] GROMMET  
6. 3S-2093 C [38] STRAP-CABLE  
7. 149-4989 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(453-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
8. 8V-0622 [1] CABLE AS-BATTERY  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [2] BOLT (5/16-18X1.375-IN)  
  1M-6120 [2] NUT (5/16-18-THD)  
  5P-0761 E CABLE (00-GA, RED)(14-CM)  
  8T-9757 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  9G-0003 [1] COVER AS-TERMINAL (BLACK)  
  9G-0004 [1] COVER AS-TERMINAL (RED)  
9. 116-0081 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(35-CM)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  9G-8909 [1] COVER-TERMINAL (BLACK)  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
10. 9X-9730 [2] BATTERY GP (12-VOLT)  
    (EACH INCLUDES)
  7N-0060 [6] VENT AS  
11. 198-7070 [1] SUPPORT AS  
12. 157-4822 M [4] BOLT (M10X1.5X250-MM)  
13. 111-4838 [15] CLIP  
14. 111-4839 [15] STRAP  
15. 8T-4195 M [19] BOLT (M10X1.5X30-MM)  
16. 8T-4186 M [6] BOLT (M10X1.5X40-MM)  
17. 132-1805 [1] STRAP AS-GROUND  
18. 229-6037 Y [1] PANEL GP-CIRCUIT BREAKER  
19. 5I-8307 [1] GROMMET  
20. 6C-9151 [1] GROMMET  
21. 177-3388 [1] GROMMET  
22. 6G-2256 [3] CLAMP  
23. 6G-2263 [3] SPACER (10.5X19X28.5-MM THK)  
24. 2G-8767 [5] WASHER (10.5X60X3-MM THK)  
25. 8T-4185 M [3] BOLT (M10X1.5X50-MM)  
26. 149-5083 [1] GROMMET  
27. 235-1749 C [1] HARNESS AS-MOTOR  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [4] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
28. 204-1730 [1] HARNESS AS-CHASSIS  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [6] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
29. 148-5020 [2] GROMMET  
30. 116-0118 C [15] CLIP  
31. 149-4993 [1] STRAP AS-GROUND  
32. 132-1843 [1] BRACKET AS  
33. 161-3064 [1] BRACKET AS  
34. 8T-4191 CM [7] BOLT (M10X1.5X16-MM)  
35. 5I-3878 [2] GROMMET (50-MM ID)  
36. 170-9469 [1] HARNESS AS-HYDRAULIC TANK  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
37. 121-1044 [1] HARNESS AS-POWER (NEUTRAL START RELAY)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
38. 140-0873 [1] BRACKET AS  
39. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
40. 222-4659 [1] HARNESS AS-ENGINE  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
41. 161-3066 [1] BRACKET AS  
42. 140-0872 [1] BRACKET AS  
43. 153-2579 [1] BRACKET AS  
44. 153-2475 [1] BRACKET AS  
45. 122-0450 [1] GROMMET  
46. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
47. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
48. 153-2447 [2] BRACKET AS  
49. 197-4450 [1] HARNESS AS-VALVE  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [21] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
50. 192-8668 [1] BRACKET AS  
52. 153-2451 [1] BRACKET AS  
53. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
54. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
55. 8T-4199 M [6] BOLT (M8X1.25X12-MM)  
56. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
57. 204-1771 [1] PLATE  
58. 161-3117 [2] KNOB AS  
    (EACH INCLUDES)
  7X-2533 M [1] BOLT (M6X1X35-MM)  
59. 161-3115 [1] COVER  
60. 161-3063 [1] BRACKET AS  
61. 4I-5049 M [2] NUT-SPACER (M6X1-THD)  
62. 167-3628 [1] HARNESS AS-WIRING (COUNTERWEIGHT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
63. 148-4808 [1] BAR  
64. 3E-5169 [1] GUARD-SWITCH  
65. 170-2512 [1] SWITCH GP-TOGGLE (SECONDARY SHUTDOWN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
67. 214-7915 [1] FILM-INSTRUCTION (ENGINE SHUTOFF)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170151
 

166-7112: CONNECTION GP-ELECTRICAL

166-7112 CONNECTION GP-ELECTRICAL
S/N 6AR1-UP
PART OF 210-9261, 210-9262 ENGINE AR-COMPLETE
i01054758 SEBP3717
1667112 CONNECTION GP-ELECTRICAL Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3964 [1] WASHER-HARD (8.8X25.5X5-MM THK)  
2. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 9X-2097 M [1] STUD (M8X1.25-THD)  
4. 5P-7970 M [1] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP37170152
 

124-2673: CONTROL & MTG GP-ENGINE ELEK

124-2673 CONTROL & MTG GP-ENGINE ELEK
S/N 6AR1-UP
PART OF 210-9261, 210-9262 ENGINE AR-COMPLETE
i00827143 SEBP3717
1242673 CONTROL & MTG GP-ENGINE ELEK Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-3055 [1] CONTROL GP-ENGINE ELECTRONIC  
  6V-6703 M [2] KIT-RETAINING BOLT  
  7X-6315 [1] STRAP AS-GROUND  
  126-7574 [1] SCREW-PAN HEAD (8-32X9.52-MM)  
2. 8T-0276 M [4] BOLT (M8X1.25X45-MM)  
3. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
4. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
5. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
6. 8T-9655 [8] MOUNT-ISOLATION  
7. 6V-3964 [1] WASHER-HARD (8.8X25.5X5-MM THK)  
8. 9X-2097 M [1] STUD (M8X1.25-THD)  
9. 5P-7970 M [1] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP37170153
 

208-7777: CONTROL & MTG GP-HYD GENERATOR

208-7777 CONTROL & MTG GP-HYD GENERATOR
S/N JMB1-UP
PART OF 205-4025 CONTROL AR-HYDRAULIC GENERATOR
AN ATTACHMENT
i01630089 SEBP3717
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4971 M [6] BOLT (M6X1X30-MM)  
  208-7775 Y [1] CONTROL GP-JOYSTICK  
  208-7776 Y [1] CONTROL GP-JOYSTICK  
  9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170154
 

139-4001: CONTROL & MTG GP-MACHINE

139-4001 CONTROL & MTG GP-MACHINE
S/N JMB1-UP
PART OF 215-8897 CHASSIS AR
i01499269 SEBP3717
1394001 CONTROL & MTG GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2106 [1] CONTROL GP-UNPROGRAMMED (OPERATOR CONTROLS)  
1A. 7X-6315 [1] STRAP AS-GROUND  
1B. 120-4897 [1] SCREW-PAN HEAD (8-32X0.375-IN)  
1C. 134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
2. 169-0489 [1] CONTROL GP-UNPRGMED MONITOR (VIMS)  
  7X-6315 [1] STRAP AS-GROUND  
  134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
  184-2472 [1] SCREW-PAN HEAD (8-32X0.375-IN)  
3. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
4. 9N-0869 [6] WASHER-HARD (8.8X25.5X2-MM THK)  
5. 8T-6869 M [4] BOLT (M8X1.25X60-MM)  
6. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
7. 8T-9655 [16] MOUNT-ISOLATION  
8. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
9. 145-0487 [4] SPACER (8.2X12.7X43.6-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37170155
 

205-4025: CONTROL AR-HYDRAULIC GENERATOR

205-4025 CONTROL AR-HYDRAULIC GENERATOR
S/N JMB1-UP
365 B MAGNET CIRCUIT
AN ATTACHMENT
i01812019 SEBP3717
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  208-7777 Y [1] CONTROL & MTG GP-HYD GENERATOR  
  200-0697 Y [1] HOOD & GUARD GP  
  204-9509 Y [1] LINES GP-FRONT  
  200-1371 Y [1] LINES GP-PUMP  
  205-6266 Y [1] WIRING GP-HYDRAULIC GENERATOR (MAGNET)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170156
 

205-6343: CONTROL GP-HYDRAULIC GENERATOR

205-6343 CONTROL GP-HYDRAULIC GENERATOR
S/N JMB1-UP
PART OF 184-5425 GENERATOR GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@318-9582@@@@@, @@@@@318-9583@@@@@, @@@@@318-9584@@@@@
AN ATTACHMENT
i02038743 SEBP3717
2056343 CONTROL GP-HYDRAULIC GENERATOR Parts scheme 2056343 CONTROL GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-4441 [1] ENCLOSURE  
2. 173-5432 [1] PANEL  
3. 230-7662 C [1] CONTROL GP-HYDRAULIC GENERATOR  
4. [1] CONVERTER  
5. [1] ELEMENT (HEAT)  
6. 178-3339 [10] SCREW (8-32X0.5-IN)  
7. 219-0370 [3] STRIP-TERMINAL  
8. [1] THERMOSTAT  
9. 160-3600 [1] RELAY (LIFT RELAY ONE)  
9A. 160-3600 [1] RELAY (LIFT RELAY TWO)  
9B. 160-3600 [1] RELAY (DROP RELAY ONE)  
9C. 160-3600 [1] RELAY (DROP RELAY TWO)  
10. 222-6983 [2] HEAT SINK  
11. 178-3341 [4] SCREW (8-32X2-IN)  
12. 9S-2544 [18] SCREW-HEX HEAD (8-32X11.13-MM)  
13. 097-5921 [1] RAIL-MOUNTING  
14. [6] BRACKET  
15. 5M-9695 [8] SCREW (6-32X0.312-IN)  
16. 160-3603 [1] RELAY (BOOST)  
17. 178-3340 [4] SCREW (1/4-20-THD)  
18. [1] MONITOR  
19. 160-3610 [1] CONNECTOR AS  
20. 180-7050 [1] CLAMP  
21. 160-3604 [1] RELAY (VOLTAGE, GENERATOR)  
22. 160-3606 [1] CONNECTOR AS  
23. 173-5450 [1] SPRING  
24. 160-3602 [1] TIMER  
25. 173-5455 [1] SOCKET-RELAY  
26. 173-5456 [1] CLIP  
27. 283-4308 [4] END-STOP  
28. 216-0244 [1] TRANSDUCER  
29. 173-5433 [1] BASE  
30. 178-3342 [2] SCREW  
31. [1] BASE  
32. [2] FUSE (30-AMPERE)  
33. 173-5451 [1] CONTACT  
34. [1] BLOCK-TERMINAL  
35. [1] BLOCK-TERMINAL  
36. 160-3596 [1] RESISTOR  
37. 173-5462 [1] RESISTOR  
38. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
39. 6V-8185 [4] NUT (1/4-20-THD)  
40. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
41. 160-3580 [1] HANDLE  
42. 160-3581 [1] SHAFT AS  
43. 173-5436 [1] FUSE (1-AMPERE)  
44. 201-9909 [3] FUSE (5-AMPERE)  
45. [4] HOLDER AS-FUSE  
46. 219-0371 [1] STRIP-TERMINAL  
47. 180-7090 [2] CONNECTOR  
48. 173-5439 [4] TERMINAL  
49. 173-5441 [1] PLATE  
50. 203-2534 [1] BASE-MOUNTING  
51. 207-7013 [1] HARNESS AS-PANEL  
52. 180-5557 [1] HARNESS AS-WIRING (MAGNET CIRCUIT)  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
53. 180-7047 [1] HARNESS AS-POWER (DC)  
54. 180-7096 [1] HARNESS AS-POWER (RESISTOR)  
55. 160-3579 [1] SWITCH (DISCONNECT)  
56. 173-5440 [26] TERMINAL  
57. 190-3816 [2] PLATE-END  
58. 180-5556 [1] ENCLOSURE  
59. 180-5558 [1] PANEL  
60. 178-3343 [2] SCREW  
61. 4B-2043 [2] NUT (8-32-THD)  
62. 180-7052 [2] STANDOFF  
63. 5P-8937 B COMPOUND-JOINT (THERMAL)  
64. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
65. 3B-4501 [2] LOCKWASHER  
66. 180-7089 [3] CONNECTOR  
67. 219-4209 [1] JUMPER-STRIP  
68. 205-8375 [1] WIRE AS  
69. 205-8374 [2] SUPPRESSOR AS  
    (EACH INCLUDES)
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(6-CM)  
70. 3L-9089 [2] SCREW-FORMING  
71. 9Y-7207 [1] STRIP-TERMINAL  
72. 4B-2047 [2] NUT (10-24-THD)  
73. 7M-9910 [2] SCREW-MACHINE (10-24X1-IN)  
74. 008-9792 [2] SCREW-WASHER HEAD (1/4-20X0.5-IN)  
75. 201-9910 [1] STRIP  
76. [2] STRIP  
77. [2] STRIP  
78. [2] STRIP  
79. [1] CABLE  
80. 123-6574 [3] BUSHING  
81. 180-7093 [2] CONNECTOR  
82. 9M-4494 [3] NUT-SPANNER (3/4-14 NPT-THD)  
83. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
84. 017-8715 [2] SCREW-SELF-TAPPING  
85. 8S-4626 [2] SPLICE-WIRE  
86. 117-9409 [1] GROMMET  
87. 229-6611 [1] DIODE AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37170157
 

318-9582: CONTROL GP-HYDRAULIC GENERATOR

318-9582 CONTROL GP-HYDRAULIC GENERATOR -15-KW
S/N JMB1-UP
FIELD REPLACEMENT FOR @@@@@205-6343@@@@@
i04044189 SEBP3717
3189582 CONTROL GP-HYDRAULIC GENERATOR Parts scheme 3189582 CONTROL GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4890 [1] NUT-SPECIAL (1/2-14-THD)  
2. 7K-1181 [6] STRAP-CABLE  
3. 8J-1256 [1] CLIP  
4. 8W-4756 [1] BUSHING-TERMINAL  
5. 062-5388 [2] LOCKNUT (1-11-1/2-THD)  
6. 068-3708 [1] LOCKNUT (1-11-1/4-THD)  
7. 104-3648 [1] BUSHING  
8. 104-3650 [1] BUSHING  
9. 135-1669 [2] CONNECTOR (MALE)  
10. 135-1670 [2] CONNECTOR (FEMALE)  
11. 171-4667 [1] COVER  
12. 178-3339 [4] SCREW (8-32X0.5-IN)  
13. 180-7113 [1] CONNECTOR  
14. 190-9372 [1] CONNECTOR  
15. 199-9107 [1] FUSE AS (70-AMPERE)  
  190-9393 [1] ADAPTER  
  190-9551 [1] FUSE (70-AMPERE)  
16. 289-3972 Y [1] PANEL GP-CONTROL  
17. 317-7370 [1] CONNECTOR  
18. 317-9124 [1] CABLE AS  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
19. 317-9128 [1] HARNESS AS-BOX  
  3N-9711 [2] CONNECTOR  
  5P-0765 E HOSE (5-CM)  
  5P-1276 E CONDUIT (26.5-MM ID)(125-CM)  
  2L-8052 [3] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
  8L-8413 [2] STRAP-CABLE (WHITE)  
20. 325-8271 [1] HARNESS AS-PANEL  
  8T-8737 [8] PLUG-SEAL  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8076 [6] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  172-6062 [1] PLUG AS-CONNECTOR (18-PIN)  
  172-6065 [1] WEDGE-PLUG LOCK  
21. 347-0570 [1] MONITOR  
22. 202-2762 [2] CLIP  
23. 4B-2043 [4] NUT (8-32-THD)  
24. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
25. 4D-7388 [1] CLIP (LOOP)  
26. 5C-2890 M [7] NUT (M6X1-THD)  
27. 5C-9553 M [7] BOLT (M6X1X16-MM)  
28. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
29. 7X-7729 [1] WASHER (11X25X3-MM THK)  
30. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
31. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [2] NUT (M10X1.5-THD)  
33. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
34. 8T-4185 M [3] BOLT (M10X1.5X50-MM)  
35. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
36. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
37. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
38. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
39. 9X-8402 [1] CLIP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170158
 

318-9583: CONTROL GP-HYDRAULIC GENERATOR

318-9583 CONTROL GP-HYDRAULIC GENERATOR -20-KW
S/N JMB1-UP
FIELD REPLACEMENT FOR @@@@@205-6343@@@@@
i04044393 SEBP3717
3189583 CONTROL GP-HYDRAULIC GENERATOR Parts scheme 3189583 CONTROL GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4890 [1] NUT-SPECIAL (1/2-14-THD)  
2. 7K-1181 [6] STRAP-CABLE  
3. 8J-1256 [1] CLIP  
4. 8W-4756 [1] BUSHING-TERMINAL  
5. 062-5388 [2] LOCKNUT (1-11-1/2-THD)  
6. 068-3708 [1] LOCKNUT (1-11-1/4-THD)  
7. 104-3648 [1] BUSHING  
8. 104-3650 [1] BUSHING  
9. 135-1669 [2] CONNECTOR (MALE)  
10. 135-1670 [2] CONNECTOR (FEMALE)  
11. 171-4667 [1] COVER  
12. 178-3339 [4] SCREW (8-32X0.5-IN)  
13. 180-7113 [1] CONNECTOR  
14. 190-9372 [1] CONNECTOR  
15. 289-3972 Y [1] PANEL GP-CONTROL  
16. 317-7370 [1] CONNECTOR  
17. 317-9124 [1] CABLE AS  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
18. 317-9128 [1] HARNESS AS-BOX  
  5P-1276 E CONDUIT (26.5-MM ID)(125-CM)  
  3N-9711 [2] CONNECTOR  
  5P-0765 E HOSE (5-CM)  
  8L-8413 [2] STRAP-CABLE (WHITE)  
  2L-8052 [3] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
19. 323-2194 [1] FUSE AS (90-AMPERE)  
  190-9393 [1] ADAPTER  
  323-2192 [1] FUSE (90-AMPERE)  
20. 347-0570 [1] MONITOR  
21. 202-2762 [2] CLIP  
22. 325-8271 [1] HARNESS AS-PANEL  
  172-6062 [1] PLUG AS-CONNECTOR (18-PIN)  
  8T-8737 [8] PLUG-SEAL  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
    -OR-
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8076 [6] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
23. 4B-2043 [4] NUT (8-32-THD)  
24. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
25. 4D-7388 [2] CLIP (LOOP)  
26. 5C-2890 M [7] NUT (M6X1-THD)  
27. 5C-9553 M [7] BOLT (M6X1X16-MM)  
28. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
29. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
30. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [2] NUT (M10X1.5-THD)  
32. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
33. 8T-4185 M [3] BOLT (M10X1.5X50-MM)  
34. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
35. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
37. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170159
 

318-9584: CONTROL GP-HYDRAULIC GENERATOR

318-9584 CONTROL GP-HYDRAULIC GENERATOR -25-KW
S/N JMB1-UP
FIELD REPLACEMENT FOR @@@@@205-6343@@@@@
i04044450 SEBP3717
3189584 CONTROL GP-HYDRAULIC GENERATOR Parts scheme 3189584 CONTROL GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-4890 [1] NUT-SPECIAL (1/2-14-THD)  
2. 7K-1181 [7] STRAP-CABLE  
3. 8J-1256 [1] CLIP  
4. 8W-4756 [1] BUSHING-TERMINAL  
5. 062-5388 [2] LOCKNUT (1-11-1/2-THD)  
6. 068-3708 [3] LOCKNUT (1-11-1/4-THD)  
7. 104-3648 [2] BUSHING  
8. 135-1669 [2] CONNECTOR (MALE)  
9. 135-1670 [2] CONNECTOR (FEMALE)  
10. 171-4667 [1] COVER  
11. 173-5434 [1] FUSE (110-AMPERE)  
12. 178-3339 [4] SCREW (8-32X0.5-IN)  
13. 180-7113 [1] CONNECTOR  
14. 190-9372 [1] CONNECTOR  
15. 289-3972 Y [1] PANEL GP-CONTROL  
16. 317-7370 [1] CONNECTOR  
17. 317-9125 [1] CABLE AS  
  9G-4336 [2] TERMINAL-RING (4-GA, 3/8-IN SCREW)  
18. 317-9127 [1] HARNESS AS-BOX  
  3N-9711 [2] CONNECTOR  
  5P-0765 E HOSE (5-CM)  
  5P-1276 E CONDUIT (26.5-MM ID)(216-CM)  
  2L-8052 [3] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
  8L-8413 [2] STRAP-CABLE (WHITE)  
19. 325-8271 [1] HARNESS AS-PANEL  
  8T-8737 [8] PLUG-SEAL  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8076 [6] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  172-6062 [1] PLUG AS-CONNECTOR (18-PIN)  
  172-6065 [1] WEDGE-PLUG LOCK  
20. 347-0570 [1] MONITOR  
21. 4B-2043 [4] NUT (8-32-THD)  
22. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
23. 4D-7388 [2] CLIP (LOOP)  
24. 4P-9254 [1] BUSHING-REDUCER  
25. 5C-2890 M [7] NUT (M6X1-THD)  
26. 5C-9553 M [7] BOLT (M6X1X16-MM)  
27. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
28. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
29. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [2] NUT (M10X1.5-THD)  
31. 8T-4185 M [3] BOLT (M10X1.5X50-MM)  
32. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
33. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
35. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Engine News
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Service Magazine
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01

Caterpillar Parts SIS Catalog 365B II :

BATTERY & WIRING GP
222-4658 BATTERY & WIRING GP
BATTERY & WIRING GP
222-4658 BATTERY & WIRING GP
222-4657 BATTERY & WIRING GP
BATTERY & WIRING GP
211-3439 BATTERY & WIRING GP
197-4449 BATTERY & WIRING GP
BATTERY & WIRING GP
145-0539 BATTERY & WIRING GP
ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
CONNECTION GP-ELECTRICAL
166-7112 CONNECTION GP-ELECTRICAL
CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
208-7777 CONTROL & MTG GP-HYD GENERATOR
CONTROL & MTG GP-MACHINE
139-4001 CONTROL & MTG GP-MACHINE
205-4025 CONTROL AR-HYDRAULIC GENERATOR
CONTROL GP-HYDRAULIC GENERATOR
205-6343 CONTROL GP-HYDRAULIC GENERATOR
CONTROL GP-HYDRAULIC GENERATOR
318-9582 CONTROL GP-HYDRAULIC GENERATOR
CONTROL GP-HYDRAULIC GENERATOR
318-9583 CONTROL GP-HYDRAULIC GENERATOR

Truck sale:

CATERPILLAR 365B II 2002
$86,149 USD 
CATERPILLAR 365B II 2002
- TRACK EXCAVATORS
BARLOWORLD FINANZAUTO
Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.