AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

199-4587 DRIVE GP-SWING -RIGHT HAND S/N JMB1-UP WITH MOTOR PART OF 136-2916, 216-0091 POWER TRAIN AR 365B II


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 365B II EXCAVATOR JMB
 365B Series II Excavator JMB00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3717 365B II JMB   (2001)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-SWING
199-4587 DRIVE GP-SWING
DRIVE GP-SWING
199-4588 DRIVE GP-SWING
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
136-2917 FASTENER GP-SWING & FINAL DR
 

#SEBP37170430
 

199-4587: DRIVE GP-SWING

199-4587 DRIVE GP-SWING -RIGHT HAND
S/N JMB1-UP
WITH MOTOR
PART OF 136-2916, 216-0091 POWER TRAIN AR
i01734356 SEBP3717
1994587 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-7975 Y [1] MOTOR & MTG GP-SWING  
2. 199-4589 Y [1] DRIVE GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170431
 

199-4588: DRIVE GP-SWING

199-4588 DRIVE GP-SWING -LEFT HAND
S/N JMB1-UP
WITH MOTOR
PART OF 136-2916, 216-0091 POWER TRAIN AR
i01638217 SEBP3717
1994588 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-7974 Y [1] MOTOR & MTG GP-SWING  
2. 199-4590 Y [1] DRIVE GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170432
 

199-4589: DRIVE GP-SWING

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N JMB1-UP
PART OF 199-4587 DRIVE GP-SWING
Type 1
i01638218 SEBP3717
1994589 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
7. 148-4646 [1] PIPE-GAUGE  
8. 231-6864 [1] BREATHER AS (SWING DRIVE)  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 7X-2569 M [16] BOLT (M20X2.5X200-MM)  
14. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
15. 1U-8846 B SEALANT-GASKET  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 136-2892 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
28. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37170433
 

199-4589: DRIVE GP-SWING

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N JMB1-UP
PART OF 199-4587 DRIVE GP-SWING
Type 2
i02458689 SEBP3717
1994589 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
7. 148-4646 [1] PIPE-GAUGE  
8. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 453-2850 M [16] BOLT (M20X2.5X200-MM)  
14. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 296-6229 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
28. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37170434
 

199-4590: DRIVE GP-SWING

199-4590 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N JMB1-UP
PART OF 199-4588 DRIVE GP-SWING
Type 1
i01638219 SEBP3717
1994590 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 231-6864 [1] BREATHER AS  
  093-5150 [1] COUPLING-PIPE  
  114-8234 [1] BREATHER (SWING DRIVE)  
  231-6969 [1] NIPPLE-PIPE  
7. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 148-4646 [1] PIPE-GAUGE  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 7X-2569 M [16] BOLT (M20X2.5X200-MM)  
14. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
15. 1U-8846 B SEALANT-GASKET  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 136-2892 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
28. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37170435
 

199-4590: DRIVE GP-SWING

199-4590 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N JMB1-UP
PART OF 199-4588 DRIVE GP-SWING
Type 2
i02458711 SEBP3717
1994590 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
7. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 148-4646 [1] PIPE-GAUGE  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 453-2850 M [16] BOLT (M20X2.5X200-MM)  
14. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 296-6229 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
28. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP37170436
 

136-2917: FASTENER GP-SWING & FINAL DR

136-2917 FASTENER GP-SWING & FINAL DR
S/N JMB1-UP
PART OF 136-2916, 216-0091 POWER TRAIN AR
i01025168 SEBP3717
1362917 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2580 M [40] BOLT (M30X3.5X90-MM)  
2. 9X-8258 [40] WASHER (33X56X6-MM THK)  
3. 267-6787 [30] SPACER (24.5X44X14-MM THK)  
4. 447-1725 M [30] BOLT (M24X3X80-MM)  
5. 096-4755 [2] PIN  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 2B-7561 [4] CORK  
9. 5D-1026 [2] CLAMP-BAND  
10. 5P-0767 E HOSE (190-CM EACH)  
11. 114-1374 [2] SUPPORT  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP37170437
 

164-2613: FILTER & LINES GP-HYDRAULIC

164-2613 FILTER & LINES GP-HYDRAULIC -BIO OIL, FINE FILTRATION
S/N JMB1-UP
HYDRAULIC RETURN
PART OF 210-3878 HYDRAULIC AR, 210-3877 HYDRAULIC AR-BIODEGRADABLE OIL
Type 1
AN ATTACHMENT
i01038081 SEBP3717
1642613 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-3851 [1] SUPPORT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
2. 171-4462 [1] BRACKET AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
3. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 165-3888 Y [1] FILTER GP-OIL (BIODEGRADABLE HYDRAULIC)  
6. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
8. 9X-6579 [1] NUT-ORIFICE (7/16-12-THD)  
9. 148-8429 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-9840 [1] TEE-SWIVEL  
10. 150-3071 [1] REDUCER AS  
  6V-8945 [1] REDUCER-O-RING  
  7J-9108 [1] SEAL-O-RING  
11. 148-8390 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8626 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
12. 148-8365 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
13. 118-9414 I [1] HOSE AS  
14. 148-8446 [1] TEE AS-SWIVEL  
  6V-9838 [1] TEE-SWIVEL  
  7J-9108 [2] SEAL-O-RING  
19. 165-3903 I [1] HOSE AS  
20. 7K-1181 [3] STRAP-CABLE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170438
 

164-2613: FILTER & LINES GP-HYDRAULIC

164-2613 FILTER & LINES GP-HYDRAULIC -BIO OIL, FINE FILTRATION
S/N JMB1-UP
HYDRAULIC RETURN
PART OF 210-3878 HYDRAULIC AR, 210-3877 HYDRAULIC AR-BIODEGRADABLE OIL
Type 2
AN ATTACHMENT
i02327935 SEBP3717
1642613 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-3851 [1] SUPPORT AS  
2. 171-4462 [1] BRACKET AS  
3. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 250-0729 CY [1] FILTER GP-OIL (HYDRAULIC)  
6. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
8. 9X-6579 [1] NUT-ORIFICE (7/16-12-THD)  
9. 148-8429 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-9840 [1] TEE-SWIVEL  
10. 150-3071 [1] REDUCER AS  
  6V-8945 [1] REDUCER-O-RING  
  7J-9108 [1] SEAL-O-RING  
11. 148-8390 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8626 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
12. 148-8365 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
13. 118-9414 I [1] HOSE AS  
14. 148-8446 [1] TEE AS-SWIVEL  
  6V-9838 [1] TEE-SWIVEL  
  7J-9108 [2] SEAL-O-RING  
15. 6V-8076 C [1] ELBOW  
16. 6V-3965 C [1] FITTING (QUICK DISCONNECT)  
17. 3J-1907 C [2] SEAL-O-RING  
18. 6V-0852 C [1] CAP-DUST  
19. 165-3903 I [1] HOSE AS  
20. 7K-1181 [3] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37170439
 

126-2080: FILTER GP-OIL

126-2080 FILTER GP-OIL
S/N JMB1-UP
PART OF 126-2112 FILTER GP-OIL
i00513865 SEBP3717
1262080 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 365B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-3814 [2] PIN  
2. 126-2081 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)(HYDRAULIC, RETURN)  
3. 095-1681 J [1] SEAL-O-RING  
4. 169-8154 [1] RING-RETAINING  
5. 4J-7533 J [1] SEAL-O-RING  
6. 9S-4180 J [1] PLUG  
7. 137-3621 [1] HANDLE  
8. 137-3628 J [1] SHIM (0.1-MM THK)  
9. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
10. 6V-7658 J [2] SEAL-O-RING  
11. 137-3623 J [4] SEAL-O-RING  
12. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
13. 137-3625 J [2] PAD  
14. 137-3810 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
15. 199-7423 [1] PLATE-SLIDE  
16. 137-3818 [1] BASE  
17. 3E-4297 J [1] SEAL-O-RING  
18. 137-3813 JM [6] BOLT-FLANGE HEAD  
19. 095-1510 J [6] SEAL-O-RING  
   
    *ATTENTION* QUANTITIES SHOWN ARE THOSE REQUIRED FOR ONE FILTER GROUP
    VERIFY TOTAL NUMBER OF FILTER GROUPS ON MACHINE BEFORE ORDERING PARTS
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  137-3635 J [1] KIT-SERVICE (HYDRAULIC FILTER)(RETURN)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 365B II :

CYLINDER GP-STICK
326-4403 CYLINDER GP-STICK
CYLINDER GP-STICK
317-8432 CYLINDER GP-STICK
CYLINDER GP-STICK
226-4152 CYLINDER GP-STICK
CYLINDER GP-STICK
179-9794 CYLINDER GP-STICK
CYLINDER GP-MASTER
4I-5693 CYLINDER GP-MASTER
CYLINDER GP-HYDRAULIC
259-0871 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
155-9071 CYLINDER GP-HYDRAULIC
CYLINDER GP-COUNTERWEIGHT
150-5913 CYLINDER GP-COUNTERWEIGHT
DRIVE GP-SWING
199-4588 DRIVE GP-SWING
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
136-2917 FASTENER GP-SWING & FINAL DR
FILTER & LINES GP-HYDRAULIC
164-2613 FILTER & LINES GP-HYDRAULIC
FILTER & LINES GP-HYDRAULIC
164-2613 FILTER & LINES GP-HYDRAULIC

Truck sale:

CATERPILLAR 365B II 2002
$86,149 USD 
CATERPILLAR 365B II 2002
- TRACK EXCAVATORS
BARLOWORLD FINANZAUTO
Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.