OPERATOR STATION
PANEL GPGENERATORS
REGULATOR GP-VOLTAGEOPERATOR STATION
TACHOMETER GPPANEL GP
ELECTRICAL AND STARTING SYSTEM
CIRCUIT BREAKER GPOPERATOR STATION
PANEL GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSOPERATOR STATION
PANEL GP#SEBP37200570
2W-5994: PANEL GP-INSTRUMENT
2W-5994 PANEL GP-INSTRUMENT
S/N JCA1-UP
PART OF 112-4443, 112-4444 PANEL GP-INSTRUMENT
FOR USE WITH SOLID STATE IGNITION
AN ATTACHMENT
S/N JCA1-UP
PART OF 112-4443, 112-4444 PANEL GP-INSTRUMENT
FOR USE WITH SOLID STATE IGNITION
AN ATTACHMENT
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS#SEBP37200571
6L-7004: POTENTIOMETER
6L-7004 POTENTIOMETER
S/N 5CA1-4801; 5DA1-4189
25-WATT
PART OF 3N-7748, 3N-7751 REGULATOR AS-VOLTAGE
S/N 5CA1-4801; 5DA1-4189
25-WATT
PART OF 3N-7748, 3N-7751 REGULATOR AS-VOLTAGE
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY) | ||||
#SEBP37200572
7E-3157: TACHOMETER GP-ELECTRIC
7E-3157 TACHOMETER GP-ELECTRIC
S/N JCA1-UP
156 TOOTH PICKUP, ADJUSTABLE
AN ATTACHMENT
S/N JCA1-UP
156 TOOTH PICKUP, ADJUSTABLE
AN ATTACHMENT
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS#SEBP37200573
5N-3387: TIMER GP
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP37200574
105-1457: VOLTMETER GP
105-1457 VOLTMETER GP
S/N 5CA1-UP; 5DA1-UP
24-VOLT
PART OF 4W-8184 METER GP-VOLT
AN ATTACHMENT
S/N 5CA1-UP; 5DA1-UP
24-VOLT
PART OF 4W-8184 METER GP-VOLT
AN ATTACHMENT
#SEBP37200575
4W-8145: CHART-CIRCUIT BREAKER
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (REFER TO ILLUSTRATION) | ||||
#SEBP37200576
5N-2703: CHART-CIRCUIT BREAKER
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (REFER TO ILLUSTRATION) | ||||
#SEBP37200577
4W-8000: CHART-CONTROL PANEL
4W-8000 CHART-CONTROL PANEL
S/N 5CA1-UP; 5DA1-UP
TOP MOUNTED
FOR USE WITH STANDBY OR PRIME POWER PACKAGE
AN ATTACHMENT
S/N 5CA1-UP; 5DA1-UP
TOP MOUNTED
FOR USE WITH STANDBY OR PRIME POWER PACKAGE
AN ATTACHMENT
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| REFER TO ILLUSTRATION | ||||
#SEBP37200578
7E-4300: CHART-INSTRUMENT PANEL
7E-4300 CHART-INSTRUMENT PANEL
S/N 5CA1-UP; 5DA1-UP
GENERATOR MOUNTED
AN ATTACHMENT
S/N 5CA1-UP; 5DA1-UP
GENERATOR MOUNTED
AN ATTACHMENT
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| REFER TO ILLUSTRATION | ||||
#SEBP37200579
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
S/N JCA1-UP
S/N JCA1-UP
Parts for your G3306 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| [1] | FILM (INFORMATION) | |||
| INSTALL ON LH SIDE OF CYLINDER HEAD NEAR FRONT BELOW 4 BOLT COVER | ||||
| 7E-2681 | [1] | PLATE-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL ON TOP OF VALVE COVER TOWARDS REAR OF ENGINE | ||||
| 159-8314 | [1] | PLATE-INFORMATION (GAS ENGINE) | ||
| INSTALL WITH LOCTITE ADHESIVE ON TOP OF FLYWHEEL HOUSING | ||||
| 3N-3790 | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| INSTALL ON CAST PAD ON UPPER LH SIDE | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| INSTALL ENGINE SERIAL NUMBER PLATE | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| INSTALL PRESTART TAG | ||||
| 3N-3469 | [1] | TAG-INSTRUCTION (ENGINE PRESTART) | ||
| INSTALL ON RH OF LH SIDE ENGINE IN A VISIBLE LOCATION | ||||
| DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT | ||||
Information:
OPERATOR STATION
PANEL GP
Engine News
Product Support Literature Available For Electronic Modular Control Panels Used On SR4 Generators
1988/02/01
1988/02/01
Different Emergency Stop Push Buttons for Electronic Modular Control Panel II (EMCP II) {4490,4450}
1994/09/01
1994/09/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Removal Of 4P-6407 Film From The Generator Set Control (GSC) Of The Electronic Modular Control Panel II (EMCP II){4490, 7451}
Removal Of 4P-6407 Film From The Generator Set Control (GSC) Of The Electronic Modular Control Panel II (EMCP II){4490, 7451}
Removal Of 4P-6407 Film From The Generator Set Control (GSC) Of The Electronic Modular Control Panel II (EMCP II){4490, 7451}
Replacing the Transformer in the Automatic Transfer Switch{4469}
Replacing the Transformer in the Automatic Transfer Switch{4469}
Replacing the Transformer in the Automatic Transfer Switch{4469}
EMCP 3 to EMCP 4.1/4.2 Cat <SUP>®</SUP> Retrofit Instructions{4490}
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Systems Operation
Service Magazine



