COOLING SYSTEM
VALVE GPAIR INLET AND EXHAUST SYSTEM
LINES GP-EXHAUSTINLET GP-AIR
TURBOCHARGER GP
COOLING SYSTEM
VALVE GP
#SEBP37221670
244-2829: VALVE GP-DIVERTER
244-2829 VALVE GP-DIVERTER -COOLANT
S/N BXS2862-UP
24 VOLT DC. COOLANT
PART OF 230-7566 VALVE GP-DIVERTER
AN ATTACHMENT
S/N BXS2862-UP
24 VOLT DC. COOLANT
PART OF 230-7566 VALVE GP-DIVERTER
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-3947 | [1] | LOCKNUT (5/8-11-THD) | |
| 2. | 230-6344 Y | [1] | CARTRIDGE GP-VALVE | |
| 3. | 301-3118 | [1] | COIL AS | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 242-6100 | [1] | BODY | |
| 5. | 242-6101 | [1] | COVER | |
| 6. | 260-0167 | [1] | KIT-DIAPHRAGM (DIVERTER VALVE) | |
| (KIT INCLUDES SEAL & DIAPHRAGM) | ||||
| 7. | 3F-9556 | [4] | LOCKWASHER | |
| 8. | 6V-9027 | [1] | SEAL-O-RING | |
| 9. | 7X-3317 | [4] | SCREW-HEX SOCKET (5/16-18X0.87-IN) | |
| 10. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37221671
244-2829: VALVE GP-DIVERTER
244-2829 VALVE GP-DIVERTER -COOLANT
S/N BXS28624-UP
24 VOLT DC. COOLANT
PART OF 230-7566 VALVE GP-DIVERTER
AN ATTACHMENT
S/N BXS28624-UP
24 VOLT DC. COOLANT
PART OF 230-7566 VALVE GP-DIVERTER
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-3947 | [1] | LOCKNUT (5/8-11-THD) | |
| 2. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 3. | 301-3118 | [1] | COIL AS | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 242-6100 | [1] | BODY | |
| 5. | 242-6101 | [1] | COVER | |
| 6. | 319-6059 C | [1] | KIT-DIAPHRAGM (DIVERTER VALVE) | |
| 7. | 3F-9556 | [4] | LOCKWASHER | |
| 8. | 6V-9027 | [1] | SEAL-O-RING | |
| 9. | 7X-3317 | [4] | SCREW-HEX SOCKET (5/16-18X0.87-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP37221672
229-3479: ADAPTER GP-EXHAUST DIFFUSER
229-3479 ADAPTER GP-EXHAUST DIFFUSER -EXHAUST
S/N BXS1-39222
126.4 MILLIMETER DIAMETER WIDE BAND CLAMP SURFACE. SHORT EXHAUST DIFFUSER WITH CLAMPING SURFACE ANGLED DOWN 9 DEGREES FROM HORIZONTAL
ALSO AN ATTACHMENT
S/N BXS1-39222
126.4 MILLIMETER DIAMETER WIDE BAND CLAMP SURFACE. SHORT EXHAUST DIFFUSER WITH CLAMPING SURFACE ANGLED DOWN 9 DEGREES FROM HORIZONTAL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP37221673
231-9479: ADAPTER GP-EXHAUST DIFFUSER
231-9479 ADAPTER GP-EXHAUST DIFFUSER -EXHAUST DIFFUSER
S/N BXS664-39222
126.4MM OD X 85MM LG. PROVIDES REAR FACING EXHAUST CONNECTION FOR TRUCK APPLICATIONS W/ 5 INCH CLAMP ON EXHAUST PIPE
ALSO AN ATTACHMENT
S/N BXS664-39222
126.4MM OD X 85MM LG. PROVIDES REAR FACING EXHAUST CONNECTION FOR TRUCK APPLICATIONS W/ 5 INCH CLAMP ON EXHAUST PIPE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP37221674
232-1681: ADAPTER GP-EXHAUST DIFFUSER
232-1681 ADAPTER GP-EXHAUST DIFFUSER -EXHAUST
S/N BXS1-39222
PROVIDES AIR LINES GROUP WITH A SHORT EXHAUST DIFFUSER AND FULL MARMAN FLANGED ANGLED DOWN, TOWARDS THE REAR OF THE ENGINE
FOR USE WITH LOW, MID, OR HIGH MOUNT TURBO CONFIGURATIONS
ALSO AN ATTACHMENT
S/N BXS1-39222
PROVIDES AIR LINES GROUP WITH A SHORT EXHAUST DIFFUSER AND FULL MARMAN FLANGED ANGLED DOWN, TOWARDS THE REAR OF THE ENGINE
FOR USE WITH LOW, MID, OR HIGH MOUNT TURBO CONFIGURATIONS
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP37221675
233-4737: ADAPTER GP-EXHAUST DIFFUSER
233-4737 ADAPTER GP-EXHAUST DIFFUSER -TURBOCHARGER DIFFUSER
S/N BXS1-39222
PROVIDES A SHORT EXHAUST DIFFUSER & FULL MARMAN FLANGE ANGLED DOWN & TOWARDS THE REAR OF ENGINE
FOR USE WITH LOW, MID OR HIGH MOUNT TURBOCHARGER
ALSO AN ATTACHMENT
S/N BXS1-39222
PROVIDES A SHORT EXHAUST DIFFUSER & FULL MARMAN FLANGE ANGLED DOWN & TOWARDS THE REAR OF ENGINE
FOR USE WITH LOW, MID OR HIGH MOUNT TURBOCHARGER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP37221676
239-7033: ADAPTER GP-EXHAUST DIFFUSER
239-7033 ADAPTER GP-EXHAUST DIFFUSER -EXHAUST
S/N BXS18022-39222
ENGINES WITH A SHORT DIFFUSER AND A FULL MARMAN FLANGE ANGLED DOWN 40 DEGREES FROM HORIZONTAL AND OUTBOARD 30 DEGREES
FOR USE WITH LOW, MID, OR HIGH MOUNT TURBO CONFIGURATIONS
ALSO AN ATTACHMENT
S/N BXS18022-39222
ENGINES WITH A SHORT DIFFUSER AND A FULL MARMAN FLANGE ANGLED DOWN 40 DEGREES FROM HORIZONTAL AND OUTBOARD 30 DEGREES
FOR USE WITH LOW, MID, OR HIGH MOUNT TURBO CONFIGURATIONS
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP37221677
235-3215: ELBOW GP-AIR INLET
235-3215 ELBOW GP-AIR INLET
S/N BXS1-39222
4 INCH 90 DEGREE ELBOW ANGLED 45 DEGREE FORWARD AND UPWARD, STUD FOR ADDITIONAL OEM CLIP POINT IN THE LOWER LEFT BOLT HOLE
ALSO AN ATTACHMENT
S/N BXS1-39222
4 INCH 90 DEGREE ELBOW ANGLED 45 DEGREE FORWARD AND UPWARD, STUD FOR ADDITIONAL OEM CLIP POINT IN THE LOWER LEFT BOLT HOLE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3. | 109-4203 | [1] | ELBOW | |
| 4. | 206-6875 | [1] | CAP-TUBE | |
| 5. | 0S-1588 | [3] | BOLT (3/8-16X1.25-IN) | |
| 6. | 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | |
| 7. | 129-3172 | [1] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 8. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) |
#SEBP37221678
255-2838: ELBOW GP-AIR INLET
255-2838 ELBOW GP-AIR INLET
90-DEGREE INTAKE MANIFOLD ELBOW ANGLED UP AND FORWARD 45-DEGREES WITH 4 RETAINING BOLTS, PROVIDES CONNECTION FOR 4-INCH HOSE, DOES NOT PROVIDE STUDS FOR OEM MOUNTING LOCATIONS
AN ATTACHMENT
90-DEGREE INTAKE MANIFOLD ELBOW ANGLED UP AND FORWARD 45-DEGREES WITH 4 RETAINING BOLTS, PROVIDES CONNECTION FOR 4-INCH HOSE, DOES NOT PROVIDE STUDS FOR OEM MOUNTING LOCATIONS
AN ATTACHMENT
For full view, you need register
#SEBP37221679
434-6150: KIT-TURBOCHARGER GASKET
434-6150 KIT-TURBOCHARGER GASKET
CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, WASHERS, SPACERS, ETC
FOR USE WITH @@@@@235-9427@@@@@, @@@@@245-6879@@@@@, @@@@@248-4642@@@@@, @@@@@245-6934@@@@@, @@@@@246-9597@@@@@, @@@@@246-9751@@@@@, @@@@@248-4415@@@@@, @@@@@248-4541@@@@@, @@@@@248-4542@@@@@, @@@@@248-4544@@@@@, @@@@@248-4625@@@@@, @@@@@248-4641@@@@@, @@@@@248-4643@@@@@, @@@@@248-4654@@@@@, @@@@@250-7218@@@@@, @@@@@250-7286@@@@@, @@@@@250-7353@@@@@, @@@@@250-7465@@@@@, @@@@@254-9554@@@@@, @@@@@258-9334@@@@@
FIELD INSTALLATION
CONTAINS THE GASKETS AND SEALS TO REINSTALL THE TURBO(S) AND ATTACHING LINES.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, WASHERS, SPACERS, ETC
FOR USE WITH @@@@@235-9427@@@@@, @@@@@245-6879@@@@@, @@@@@248-4642@@@@@, @@@@@245-6934@@@@@, @@@@@246-9597@@@@@, @@@@@246-9751@@@@@, @@@@@248-4415@@@@@, @@@@@248-4541@@@@@, @@@@@248-4542@@@@@, @@@@@248-4544@@@@@, @@@@@248-4625@@@@@, @@@@@248-4641@@@@@, @@@@@248-4643@@@@@, @@@@@248-4654@@@@@, @@@@@250-7218@@@@@, @@@@@250-7286@@@@@, @@@@@250-7353@@@@@, @@@@@250-7465@@@@@, @@@@@254-9554@@@@@, @@@@@258-9334@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 197-8418 | [2] | GASKET | ||
| 197-8419 | [2] | GASKET (TURBOCHARGER) | ||
| 225-3102 | [1] | GASKET | ||
| 274-6851 | [1] | GASKET-TURBOCHARGER | ||
| 391-2167 | [8] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 233-8014 | [1] | SEAL | ||
| 160-7037 | [1] | SEAL-INTEGRAL | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-6353 | [2] | SEAL-O-RING | ||
| 8L-2786 | [3] | SEAL-O-RING | ||
| 210-9246 | [2] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 2N-9288 | [4] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 313-9550 | [4] | STUD-TAPERLOCK (3/8-16X2.165-IN) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
Information:
COOLING SYSTEM
VALVE GP
Truck Engine News
Special Instruction
Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D}
Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D}
Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D}
Disassembly and Assembly
