ENCLOSURES, GUARDS AND BASES
SUPPRESSION GP-SOUNDOPERATOR STATION
MONITOR GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
ENCLOSURES, GUARDS AND BASES
SUPPRESSION GP-SOUND
#SEBP37221840
227-9980: PANEL GP-SOUND SUPPRESSION
227-9980 PANEL GP-SOUND SUPPRESSION -ENGINE FRONT HOUSING
CANNOT BE USED WITH ALTERNATOR MOUNTING GROUPS AND ACCESSORY DRIVE GROUPS
AN ATTACHMENT
CANNOT BE USED WITH ALTERNATOR MOUNTING GROUPS AND ACCESSORY DRIVE GROUPS
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 324-6804 | [1] | COVER AS (SOUND SUPPRESSION) | |
| 2. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 3. | 0S-1594 | [3] | BOLT (3/8-16X1-IN)(MARKED X) | |
| 4. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 5. | 1A-5964 | [4] | BOLT (3/8-16X4.5-IN)(MARKED Y) | |
| 6. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 8. | 9X-6458 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP37221841
229-9933: PANEL GP-SOUND SUPPRESSION
229-9933 PANEL GP-SOUND SUPPRESSION -FRONT HOUSING
S/N BXS1-39222
REQUIRES FASTENER GROUP
FOR USE WITH ALTERNATOR MOUNTING GROUP AND ACCESSORY DRIVE GROUP
ALSO AN ATTACHMENT
S/N BXS1-39222
REQUIRES FASTENER GROUP
FOR USE WITH ALTERNATOR MOUNTING GROUP AND ACCESSORY DRIVE GROUP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 324-6803 | [1] | COVER AS-SOUND SUPPRESSION | |
| 2. | 0S-1588 | [5] | BOLT (3/8-16X1.25-IN)(MARKED Y) | |
| 3. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 4. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 5. | 1A-5964 | [1] | BOLT (3/8-16X4.5-IN) | |
| 6. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 8. | 9X-6458 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP37221842
240-1900: MODULE GP-DISPLAY
240-1900 MODULE GP-DISPLAY
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP37221843
245-4846: MODULE GP-DISPLAY
245-4846 MODULE GP-DISPLAY -MESSENGER
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
PROVIDES NEW DISPLAY WITH METAL INTEGRATED BEZEL TO SEAL THE UNIT
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP37221844
247-4829: MODULE GP-DISPLAY
247-4829 MODULE GP-DISPLAY -MESSENGER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 278-0086 | [1] | HARNESS AS-MONITOR (MESSENGER DISPLAY) | |
| 092-8226 | [1] | SPLICE | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(2-CM) | |||
| 153-2707 E | CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(62-CM) | |||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 2. | 245-2943 | [1] | CONTROL GP-UNPRGMED MONITOR (MESSENGER) | |
| 267-1371 F | [1] | SOFTWARE GP-MONITOR | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP37221845
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 114-5988 | [1] | FILM-IDENTIFICATION (FUEL FILTER) | ||
| (INSTALL ON SPIN-ON FUEL FILTER) | ||||
| 228-3581 | [2] | FILM-WARNING (DO NOT OPERATE, READ OMM) | ||
| (INSTALL ONE ON LEFT HAND SIDE OF ENGINE ON VALVE COVER BASE ON FLAT BEHIND FIRST 18 PIN INECTOR CONNECTOR) | ||||
| (FOURTH FLAT VERTICAL SURFACE FROM REAR OF ENGINE) | ||||
| (INSTALL ONE ON RIGHT HAND SIDE OF ENGINE ON VERTICAL SURFACE OF REGULATOR HOUSING BELOW CASTED ROUND BOSS) | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| (INSTALL ON LEFT HAND SIDE OF ENGINE) | ||||
| (-FIRST INSTALL SILVER FILM-) | ||||
| (INSTALL ON LEFT HAND SIDE OF CYLINDER HEAD ON THE 170MM ROUGH CAST SURFACE AT THE TOP OF HEAD) | ||||
| (LOCATED BELOW THE FRONT 18 PIN INJECTOR CONNECTOR) | ||||
| (-SECOND INSTALL LAMINATE FILM-) | ||||
| 3N-3790 | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| (REFLATTEN AFTER STAMPING-INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON LOWER RH REAR CORNER OF CYLINDER BLOCK | ||||
| APPROXIMATELY 53MM FROM REAR FACE OF BLOCK TO LH SIDE OF PLATE & 64MM FROM BOTTOM FACE OF BLOCK TO BOTTOM OF PLATE) | ||||
| (STAMP SERIAL NUMBER IN BLOCK JUST TO THE RIGHT OF THE PLATE IN FIGURES 6MM HIGH) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| (INSTALL PRESTART TAG) | ||||
| 3N-3469 | [1] | TAG-INSTRUCTION (ENGINE PRESTART) | ||
| (INSTALL ON LEFT HAND SIDE & TOWARDS THE FRONT OF THE ENGINE) | ||||
#SEBP37221846
160-9874: KIT-GASKET
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | |
| 2. | 110-2220 | [1] | SEAL-LINER (MID) | |
| 3. | 142-7072 | [1] | SEAL-LINER (COOLANT) | |
| 4. | 142-6217 | [1] | SEAL-O-RING | |
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP37221847
257-2756: KIT-GASKET
257-2756 KIT-GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS
FIELD REPLACEMENT FOR 213-8113 KIT-GASKET
FOR USE WITH @@@@@234-8421@@@@@, @@@@@246-9382@@@@@
FIELD INSTALLATION
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS
FIELD REPLACEMENT FOR 213-8113 KIT-GASKET
FOR USE WITH @@@@@234-8421@@@@@, @@@@@246-9382@@@@@
FIELD INSTALLATION
For full view, you need register
#SEBP37221848
259-4662: KIT-GASKET
259-4662 KIT-GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL ENGINE MOUNTED FUEL SYSTEM COMPONENTS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FOR USE WITH @@@@@240-4260@@@@@, @@@@@246-9382@@@@@
FIELD INSTALLATION
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL ENGINE MOUNTED FUEL SYSTEM COMPONENTS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FOR USE WITH @@@@@240-4260@@@@@, @@@@@246-9382@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0436 | [2] | GASKET (FUEL PRIMING PUMP) | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [3] | SEAL-O-RING | ||
| 8L-2779 | [1] | SEAL-O-RING | ||
| 8L-2786 | [4] | SEAL-O-RING | ||
| 8T-5452 | [1] | SEAL-O-RING | ||
| 033-6033 | [1] | SEAL-O-RING | ||
| 033-6042 | [10] | SEAL-O-RING | ||
| 061-7539 | [1] | SEAL-O-RING | ||
| 107-5769 | [2] | SEAL-O-RING | ||
| 203-3940 | [2] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING |
#SEBP37221849
280-0481: KIT-GASKET
280-0481 KIT-GASKET
CONTAINS THE GASKETS & SEALS TO REINSTALL THE AIR COMPRESSOR & AIR COMPRESSOR DRIVE
FIELD REPLACEMENT FOR 253-3428 KIT-GASKET
FOR USE WITH @@@@@251-9162@@@@@
FIELD INSTALLATION
CONTAINS THE GASKETS & SEALS TO REINSTALL THE AIR COMPRESSOR & AIR COMPRESSOR DRIVE
FIELD REPLACEMENT FOR 253-3428 KIT-GASKET
FOR USE WITH @@@@@251-9162@@@@@
FIELD INSTALLATION
For full view, you need register
Information:
ENCLOSURES, GUARDS AND BASES
SUPPRESSION GP-SOUND
Truck Engine News
