BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
BASIC ENGINE
CYLINDER BLOCK GP
#SEBP37280010
7N-1292: COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-0130 | [1] | COVER | |
| 4M-6480 | [1] | GASKET | ||
| 2. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 3. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 4. | 8L-8662 | [1] | COVER | |
| 5S-8055 | [1] | GASKET | ||
| 5. | 4B-3938 | [1] | PLUG-CUP | |
| 6. | 2A-3798 | [2] | DOWEL | |
| 7. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) |
#SEBP37280011
2P-6530: COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP37280012
7N-4314: COVER GP-FRONT HOUSING
7N-4314 COVER GP-FRONT HOUSING
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8374 C | [1] | COVER-PUMP | |
| 2. | 5F-3106 | [1] | SEAL-O-RING | |
| 3. | 0S-1566 B | [4] | BOLT (5/8-11X1.5-IN) | |
| 4. | 8M-9024 C | [6] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 5. | 3S-2713 | [6] | NUT-FULL (3/8-24-THD) | |
| 6. | 9N-5769 C | [1] | COVER-HOUSING | |
| 7. | 6N-7887 | [1] | GASKET-HOUSING COVER | |
| 8. | 5P-8247 C | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 9. | 2P-0220 B | [1] | GASKET-PUMP | |
| 10. | 1W-4542 | [1] | COVER-WATER PUMP | |
| 11. | 3B-1915 B | [3] | BOLT (3/8-16X1.375-IN) | |
| 12. | 5M-2894 B | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP37280013
8N-4745: COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP37280014
334-8389: CRANKSHAFT AS
334-8389 CRANKSHAFT AS
PART OF 6N-8079 CRANKSHAFT GP
PART OF 6N-8079 CRANKSHAFT GP
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP37280015
6N-8079: CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-3652 | [2] | PLATE-THRUST | |
| 2. | 334-8389 Y | [1] | CRANKSHAFT AS | |
| 3. | 232-3233 C | [7] | BEARING-MAIN (STANDARD) | |
| 8N-8225 AB | [7] | BEARING-MAIN (0.25-MM US) | ||
| 8N-8226 AB | [7] | BEARING-MAIN (0.51-MM US) | ||
| 8N-8227 AB | [7] | BEARING-MAIN (0.76-MM US) | ||
| 8N-8228 AB | [7] | BEARING-MAIN (0.51-MM OS) | ||
| 8N-8229 AB | [7] | BEARING-MAIN (0.25-MM US, 0.51-MM OS) | ||
| 4P-7305 AB | [7] | BEARING-MAIN (0.51-MM OS, 0.51-MM US) | ||
| 4P-7306 AB | [7] | BEARING-MAIN (0.51-MM OS, 0.76-MM US) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37280016
1N-3576: CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7N-6550@@@@@
FIELD REPLACEMENT FOR @@@@@ 7N-6550@@@@@
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-4046 | [4] | BUSHING | |
| 2. | 3J-6019 | [1] | PLUG | |
| 3. | 8K-1207 | [2] | DOWEL | |
| 4. | 4B-5387 | [1] | PLUG-CUP | |
| 5. | 1S-9540 | [1] | DOWEL | |
| 6. | 5B-7652 | [2] | DOWEL | |
| 7. | 6N-8003 | [7] | CAP-CRANKSHAFT BEARING | |
| 8. | 4B-3938 | [1] | PLUG-CUP | |
| 9. | 8B-6349 | [2] | DOWEL | |
| 10. | 5S-8462 | [1] | STUD | |
| 11. | 8N-4110 | [1] | BUSHING | |
| 12. | 4B-9782 | [1] | BALL | |
| 13. | 7S-3224 | [14] | BOLT (5/8-11X5.25-IN) | |
| 2S-5658 | [14] | WASHER-HARD (17X29X3-MM THK) |
#SEBP37280017
7N-6550: CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
PART OF 7N-8016 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
PART OF 7N-8016 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 456-5581 | [18] | SEAL-O-RING | |
| 2. | 371-5941 | [6] | LINER-CYLINDER | |
| 104-5512 ABJ | INSERT-LINER SEAT (0.822-MM THK) | |||
| 104-5518 ABJ | INSERT-LINER SEAT (1.605-MM THK) | |||
| 104-5527 ABJ | INSERT-LINER SEAT (2.71-MM THK) | |||
| 104-5530 ABJ | INSERT-LINER SEAT (5.21-MM THK) | |||
| (REFER TO SEBF8198 FOUND IN SISWEB FOR LINER INSERTS.) | ||||
| 3. | 2W-6134 | [6] | BAND-FILLER | |
| 4. | 7S-3224 | [14] | BOLT (5/8-11X5.25-IN) | |
| 5. | 6N-8003 | [7] | CAP-CRANKSHAFT BEARING | |
| 6. | 2S-5658 | [14] | WASHER-HARD (17X29X3-MM THK) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | TO REPAIR LIGHT DAMAGE DUE TO EROSION/FRETTING IN THE LINER FLANGE SEATING AREA | |||
#SEBP37280018
7N-8016: CYLINDER BLOCK GP
7N-8016 CYLINDER BLOCK GP
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-6550 Y | [1] | CYLINDER BLOCK GP | |
| 2. | 7M-4046 | [4] | BUSHING | |
| 3. | 8K-1207 | [2] | DOWEL | |
| 4. | 3S-5496 | [1] | SEAL-O-RING | |
| 5. | 8B-6349 | [2] | DOWEL | |
| 6. | 7N-7998 | [1] | PLATE-BLOCK | |
| 7. | 115-7550 | [1] | GASKET-PLATE | |
| 8. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 9. | 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 10. | 8T-6765 | [4] | PLUG-PIPE (1/4-18-THD) | |
| 11. | 8M-9307 | [1] | PLUG | |
| 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | ||
| 12. | 8T-6762 | [3] | PLUG-PIPE (1/2-14-THD) | |
| 13. | 5B-7652 | [2] | DOWEL | |
| 14. | 8N-4110 | [1] | BUSHING | |
| 15. | 4B-5387 | [2] | PLUG-CUP | |
| 16. | 4B-9782 | [1] | BALL | |
| 17. | 1S-9540 | [1] | DOWEL | |
| 18. | 5S-8462 | [1] | STUD | |
| 19. | 4B-3938 C | [1] | PLUG-CUP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37280019
9Y-2638: CYLINDER HEAD AS
9Y-2638 CYLINDER HEAD AS
PART OF 416-8456, 489-3135, 9Y-3640 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 6I-2402@@@@@
PART OF 416-8456, 489-3135, 9Y-3640 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 6I-2402@@@@@
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-2138 | [1] | CYLINDER HEAD AS | |
| 2. | 107-0268 | [6] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
| AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 3. | 7N-1649 | [6] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
| 7C-5339 AB | INSERT-VALVE SEAT (0.13-MM OS, EXHAUST) | |||
| 7C-5340 AB | INSERT-VALVE SEAT (0.25-MM OS, EXHAUST) | |||
| 7C-5341 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5342 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4. | 3B-0623 | [6] | PLUG-CUP | |
| 5. | 3S-8313 | [7] | PLUG-CUP | |
| 6. | 3P-1896 | [1] | PLUG-CUP | |
| 7. | 1S-3062 | [18] | DIRECTOR-WATER | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Engine News
Operation and Maintenance Manual
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
Specifications
Testing and Adjusting
Disassembly and Assembly
