ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
BOX GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP37280240
6T-1395: ALTERNATOR GP-CHARGING
6T-1395 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
PART OF 100-4511, 3N-2706 ALTERNATOR GP-CHARGING
AN ATTACHMENT
24-VOLT, 35-AMPERE
PART OF 100-4511, 3N-2706 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8L-9655 | [1] | HOUSING-FRONT | |
| 2. | 8L-9661 | [1] | FAN-ALTERNATOR (14-BLADE) | |
| 3. | 1N-9087 | [1] | SPACER (0.628X1.35X0.33-MM THK) | |
| 4. | 8L-9657 | [1] | RETAINER-FRONT BEARING | |
| 5. | 1S-7056 | [1] | BALL BEARING | |
| 6. | 8L-9362 | [1] | GASKET-COVER | |
| 7. | 6T-2031 | [1] | BRUSH AS | |
| 8. | 134-8278 | [1] | REGULATOR GP-VOLTAGE (24 VOLT)(ALTERNATOR) | |
| 9. | 143-9760 | [1] | STATOR AS | |
| 10. | 8L-9663 | [1] | SEAL-GREASE | |
| 11. | 9G-5208 | [1] | RETAINER-REAR BEARING | |
| 12. | 6T-9446 | [1] | HOUSING-REAR | |
| 13. | 3N-1202 | [1] | ROTOR AS | |
| 5P-6836 | [1] | BEARING (DOUBLE SHIELD) | ||
| 3K-6168 | [1] | BOLT-SOCKET HEAD (10-32X0.625-IN) | ||
| 7H-2079 | [1] | LOCKWASHER | ||
| 3N-1223 | [1] | WASHER (0.196X0.312X0.067-IN THK) | ||
| 14. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 15. | 8L-9656 | [1] | WASHER (31.8X40.9X2.36-MM THK) | |
| 16. | 6V-8645 | [1] | NUT (5/8-18-THD) | |
| 17. | 7T-0676 | [1] | DIODE AS-POSITIVE (3 DIODE) | |
| 18. | 7T-0895 | [2] | CAP (ALTERNATOR) | |
| 19. | 1B-8704 | [1] | KEY-WOODRUFF | |
| 20. | 8L-9654 | [1] | SLEEVE-SHAFT | |
| 21. | 7T-0677 | [1] | DIODE AS-NEGATIVE (3 DIODE) | |
| 22. | 3B-4510 | [1] | LOCKWASHER | |
| 23. | 5P-6836 | [1] | BEARING (DOUBLE SHIELD) | |
| 24. | 3N-1200 | [1] | RING AS-SLIP | |
| 25. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 1H-3244 | [1] | LOCKWASHER | |
| 27. | 4B-2047 | [1] | NUT (10-24-THD) | |
| 28. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 29. | 8F-1434 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 140-3005 | [1] | KIT-TERMINAL (ALTERNATOR) | ||
| (INCLUDES INSULATORS, NUTS, LOCKWASHERS, SCREWS & WASHERS) | ||||
| 140-3004 | [1] | KIT-HARDWARE (ALTERNATOR) | ||
| (INCLUDES BOLTS, LOCKWASHERS, NUTS, SCREWS, STRAPS & WASHERS) | ||||
#SEBP37280241
6T-1396: ALTERNATOR GP-CHARGING
6T-1396 ALTERNATOR GP-CHARGING
12-VOLT, 51-AMPERE
PART OF 100-4510, 3N-2708 ALTERNATOR GP-CHARGING
AN ATTACHMENT
12-VOLT, 51-AMPERE
PART OF 100-4510, 3N-2708 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8L-9655 | [1] | HOUSING-FRONT | |
| 2. | 8L-9661 | [1] | FAN-ALTERNATOR (14-BLADE) | |
| 3. | 1N-9087 | [1] | SPACER (0.628X1.35X0.33-MM THK) | |
| 4. | 8L-9657 | [1] | RETAINER-FRONT BEARING | |
| 5. | 1S-7056 | [1] | BALL BEARING | |
| 6. | 8L-9362 | [1] | GASKET-COVER | |
| 7. | 6T-2031 | [1] | BRUSH AS (ALTERNATOR) | |
| 8. | 8L-9663 | [1] | SEAL-GREASE | |
| 9. | 9G-5208 | [1] | RETAINER-REAR BEARING | |
| 10. | 6T-9446 | [1] | HOUSING-REAR | |
| 11. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 12. | 8L-9656 | [1] | WASHER (31.8X40.9X2.36-MM THK) | |
| 13. | 6V-8645 | [1] | NUT (5/8-18-THD) | |
| 14. | 7T-0676 | [1] | DIODE AS-POSITIVE (3 DIODE) | |
| 15. | 7T-0895 | [2] | CAP (CONNECTOR) | |
| 16. | 1B-8704 | [1] | KEY-WOODRUFF | |
| 17. | 8L-9654 | [1] | SLEEVE-SHAFT | |
| 18. | 7T-0677 | [1] | DIODE AS-NEGATIVE (3 DIODE) | |
| 19. | 3B-4510 | [1] | LOCKWASHER | |
| 20. | 5P-6836 | [1] | BEARING (DOUBLE SHIELD) | |
| 21. | 3N-1200 | [1] | RING AS-SLIP | |
| 22. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 1H-3244 | [1] | LOCKWASHER | |
| 24. | 4B-2047 | [1] | NUT (10-24-THD) | |
| 25. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 26. | 8F-1434 | [1] | LOCKWASHER | |
| 27. | 143-9759 | [1] | STATOR AS | |
| 28. | 134-8277 | [1] | REGULATOR GP-VOLTAGE (ALTERNATOR AIR)(12-VOLT) | |
| 29. | 3N-1203 | [1] | ROTOR AS | |
| 5P-6836 | [1] | BEARING (DOUBLE SHIELD) | ||
| 3K-6168 | [1] | BOLT-SOCKET HEAD (10-32X0.625-IN) | ||
| 7H-2079 | [1] | LOCKWASHER | ||
| 3N-1223 | [1] | WASHER (0.196X0.312X0.067-IN THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 140-3004 | [1] | KIT-HARDWARE (ALTERNATOR) | ||
| (INCLUDES BOLTS, NUTS, KEY LOCKWASHERS & SCREWS) | ||||
| 140-3005 | [1] | KIT-TERMINAL (ALTERNATOR) | ||
| (INCLUDES CAP, SLEEVES, NUTS, INSULATORS & WASHERS) | ||||
#SEBP37280242
7W-0408: BATTERY CHARGER
7W-0408 BATTERY CHARGER
24-VOLT
FOR USE WITH LEAD ACID OR NICAD BATTERY
AN ATTACHMENT
24-VOLT
FOR USE WITH LEAD ACID OR NICAD BATTERY
AN ATTACHMENT
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP37280243
131-0832: BATTERY CHARGER GP
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP37280244
160-5447: BATTERY GP
160-5447 BATTERY GP
24-VOLT, 950 COLD CRANKING AMPERE, 90-AMPERE HOUR. LOW MAINTENANCE
AN ATTACHMENT
24-VOLT, 950 COLD CRANKING AMPERE, 90-AMPERE HOUR. LOW MAINTENANCE
AN ATTACHMENT
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-7397 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(20-CM) | |||
| 2. | 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | |
| 3. | 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 4. | 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 6. | 9G-0003 | [2] | COVER AS-TERMINAL (BLACK) | |
| 7. | 9G-0004 | [2] | COVER AS-TERMINAL (RED) | |
| 8. | 115-2421 | [2] | BATTERY GP (12-VOLT, MAINTENANCE FREE, DRY) | |
| (EACH INCLUDES) | ||||
| 123-1373 | [6] | CAP AS-FILLER (7/8-9-THD) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP37280245
7C-1899: BATTERY GP
7C-1899 BATTERY GP
24 VOLT, 580 COLD CRANKING AMPRERE, 66-AMPERE HOUR
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
24 VOLT, 580 COLD CRANKING AMPRERE, 66-AMPERE HOUR
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-7397 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(20-CM) | |||
| 2. | 5M-9205 | [1] | TERMINAL AS (NEGATIVE) | |
| 3. | 5M-9204 | [1] | TERMINAL AS (POSITIVE) | |
| 4. | 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 5. | 9G-0004 | [2] | COVER AS-TERMINAL (RED) | |
| 6. | 9G-0003 | [2] | COVER AS-TERMINAL (BLACK) | |
| 7. | 3T-5857 | [2] | BATTERY (12-VOLT)(WET) | |
| 8. | 5M-9204 | [1] | TERMINAL AS (POSITIVE) | |
| 9. | 5M-9205 | [1] | TERMINAL AS (NEGATIVE) | |
| 10. | 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP37280246
7C-1976: BATTERY GP
7C-1976 BATTERY GP
24 VOLT, 67 AMPERE. LOW MAINTENANCE
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
24 VOLT, 67 AMPERE. LOW MAINTENANCE
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-7397 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(20CM) | |||
| 2. | 5M-9205 | [1] | TERMINAL AS (NEGATIVE) | |
| 3. | 5M-9204 | [1] | TERMINAL AS (POSITIVE) | |
| 4. | 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 5. | 9G-0004 | [2] | COVER AS-TERMINAL (RED) | |
| 6. | 9G-0003 | [2] | COVER AS-TERMINAL (BLACK) | |
| 7. | 153-5656 | [2] | BATTERY (12-VOLT, MAINTENANCE FREE) | |
| 8. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP37280247
7L-7867: BATTERY GP
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1L-5686 | [2] | CABLE AS | |
| (EACH INCLUDES) | ||||
| 5P-0747 E | CABLE (00-GA, BLACK)(32CM) | |||
| 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 2. | 5M-9204 | [2] | TERMINAL AS (POSITIVE) | |
| (EACH INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 3. | 5M-9205 | [2] | TERMINAL AS (NEGATIVE) | |
| (EACH INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 4. | 8C-3629 | [4] | BATTERY (6-VOLT) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP37280248
7L-7871: BATTERY GP
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-7397 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(20-CM) | |||
| 2. | 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | |
| 3. | 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 4. | 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5. | 9G-0004 | [1] | COVER AS-TERMINAL (RED) | |
| 6. | 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | |
| 7. | 9X-9720 C | [2] | BATTERY (12-VOLT)(DRY) | |
| (EACH INCLUDES) | ||||
| 7N-0060 | [6] | VENT AS (BATTERY) | ||
| 8. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP37280249
105-3511: BOX GP-JUNCTION
For full view, you need register
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-5520 | [2] | SCREW-TAPPING (10-24X0.5-IN) | |
| 2. | 9Y-7376 | [1] | ENCLOSURE AS | |
| 3. | 3K-8106 | [2] | SCREW-MACHINE (8-32X1-IN) | |
| 4. | 4B-4863 | [5] | WASHER (4.7X11X1.2-MM THK) | |
| 5. | 4F-8711 | [1] | PLUG-BUTTON | |
| 6. | 1N-9770 | [1] | CIRCUIT BREAKER AS (12.5-AMPERE) | |
| 6A. | 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | |
| 9B-7233 | [2] | LOCKWASHER | ||
| 7. | 9F-3099 | [1] | SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR) | |
| 6V-8186 | [2] | NUT-FULL (5/16-24-THD) | ||
| 3L-6789 | [2] | LOCKWASHER | ||
| 8F-0908 | [2] | WASHER (0.318X0.562X0.035-IN THK) | ||
| 4B-2043 | [2] | NUT (8-32-THD) | ||
| 3B-4501 | [2] | LOCKWASHER | ||
| 8. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 0S-1614 | [2] | BOLT (1/4-20X0.5-IN) | |
| 10. | 6K-9591 | [2] | PLUG-BUTTON | |
| 11. | 3L-4566 | [1] | PLUG-BUTTON | |
| 12. | 2W-8938 | [1] | WIRE AS | |
| 13. | 9Y-7377 | [1] | PLATE | |
| 14. | 4W-3595 | [3] | MOUNT | |
| 15. | 4B-2043 | [3] | NUT (8-32-THD) | |
| 6I-0921 F | [1] | FITTING-CABLE (1-IN) | ||
| F | NOT SHOWN | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Special Instruction
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Testing and Adjusting
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
