AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

319-4235 CABLE GP-GOVERNOR CONTROL S/N MCF1-UP FOR FIELD REPAIR OF GOVERNOR MOTOR CABLES PART OF 211-5624 CONTROL GP-GOVERNOR ALSO FIELD INSTALLATION 321C


FUEL SYSTEM
CONTROL GP-GOVERNOR
FILTER GP-FUEL
TANK GP-FUEL
LINES GP-FUEL
LINES GP-FUEL INJECTION
NOZZLE GP-UNIT INJECTOR

EXCAVATOR 321C EXCAVATOR MCF
 321C LCR Hydraulic Excavator MCF00001-UP (MACHINE) POWERED BY 3066 Engine SEBP3740 321C MCF   (2002)

FUEL SYSTEM

CONTROL GP-GOVERNOR
319-4235 CABLE GP-GOVERNOR CONTROL
CONTROL GP-GOVERNOR
211-5624 CONTROL GP-GOVERNOR
 

#SEBP37400090
 

319-4235: CABLE GP-GOVERNOR CONTROL

319-4235 CABLE GP-GOVERNOR CONTROL
S/N MCF1-UP
FOR FIELD REPAIR OF GOVERNOR MOTOR CABLES
PART OF 211-5624 CONTROL GP-GOVERNOR
ALSO FIELD INSTALLATION
i02959218 SEBP3740
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  248-4754 [1] HARNESS AS-ENGINE (GOVERNOR BREAKOUT)  
  188-8589 [1] HARNESS AS-WIRING (GOVERNOR ACTUATOR, TEST)  
  3S-2093 [8] STRAP-CABLE  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9Y-7207 [1] STRIP-TERMINAL  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  2L-8074 [8] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  4Y-4079 [3] WIRE AS  
   
    AVAILABLE REPAIR KIT(S):
  309-5862 [1] KIT-MOTOR REPAIR  
    (INCLUDES CABLE,2 SEALS & PACKING)
 

#SEBP37400091
 

211-5624: CONTROL GP-GOVERNOR

211-5624 CONTROL GP-GOVERNOR
S/N MCF1-UP
PART OF 214-7934 CHASSIS AR
i01853128 SEBP3740
2115624 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] BRACKET AS  
2. 164-8244 [1] LEVER AS  
3. 211-5664 [1] BRACKET AS  
4. 247-5215 [1] MOTOR AS-GOVERNOR  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [1] PLUG-SEAL  
  144-1636 [7] PIN-CONNECTOR (14-GA TO 18-GA)  
  157-3160 [2] JOINT  
5. 221-8786 [1] BRACKET AS  
6. 4K-6177 [2] CLIP  
7. 5C-7261 M [2] NUT (M8X1.25-THD)  
8. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
9. 8C-8451 M [2] BOLT (M6X1X40-MM)  
10. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
12. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
13. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
14. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
15. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
   
  319-4235 AFY [1] CABLE GP-GOVERNOR CONTROL  
    (REFER TO REHS2358 FIELD REPAIR OF GOVERNOR MOTOR CABLES)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37400092
 

212-8560: FILTER GP-FUEL

212-8560 FILTER GP-FUEL
S/N MAE1-UP; MCF1-UP; 7JK55000-99999
PART OF 217-5494, 239-6530, 287-0098, 287-0099, 287-0105 ENGINE AR
ALSO AN ATTACHMENT
i01847590 SEBP3740
2128560 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-8219 [1] FILTER AS-FUEL (SECONDARY)  
1A. 094-9726 [2] BOLT (M14X1.5X26-MM)  
1B. 095-2040 [4] WASHER  
1C. 094-9725 [1] PLUG  
1D. 095-2038 [1] WASHER (7.8X13.5X2-MM THK)  
1E. 196-8220 [1] BRACKET  
1F. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
2. 212-8610 [1] BRACKET  
3. 212-8612 [1] BRACKET  
4. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
5. 190-5830 [1] TUBE  
6. 183-8224 [2] TUBE  
7. 7X-0796 [8] LOCKWASHER (10.2X18.4X2.5-MM THK)  
8. 190-5828 [1] HOSE  
9. 190-5829 [1] HOSE  
10. 117-6430 [1] HOSE  
11. 099-5041 [2] BOLT (M14X1.5X27-MM)  
12. 095-2040 [4] WASHER  
13. 137-5541 [1] PUMP GP-FUEL PRIMING  
  061-7539 [1] SEAL-O-RING  
  229-3218 [2] VALVE AS  
14. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
15. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
16. 178-6595 M [1] BOLT (M6X1X30-MM)  
17. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
18. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
19. 096-2500 [1] LOCKWASHER  
20. 3B-4505 [1] LOCKWASHER  
  M   METRIC PART
 

#SEBP37400093
 

223-3095: GAUGE GP-SIGHT

223-3095 GAUGE GP-SIGHT -FUEL LEVEL
S/N MCF1-UP
PART OF 223-2782 TANK GP-FUEL
FIELD REPLACEMENT ORDER @@@@@351-2955@@@@@
i02104734 SEBP3740
2233095 GAUGE GP-SIGHT Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-4855 [4] SEAL-O-RING  
2. 236-3259 M [2] BOLT-SPECIAL  
3. 237-8526 [1] TUBE  
4. 095-1519 [4] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP37400094
 

351-2955: GAUGE GP-SIGHT

351-2955 GAUGE GP-SIGHT -FUEL LEVEL
S/N MCF1-UP
PART OF 223-2782 TANK GP-FUEL
FIELD REPLACEMENT FOR @@@@@223-3095@@@@@
i04262795 SEBP3740
3512955 GAUGE GP-SIGHT Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 347-6082 [2] BLOCK  
2. 236-3259 M [2] BOLT-SPECIAL  
3. 237-8526 [1] TUBE  
4. 6F-6672 [4] SEAL-O-RING  
5. 6F-4855 [4] SEAL-O-RING  
  M   METRIC PART
 

#SEBP37400095
 

223-2755: LINES GP-FUEL

223-2755 LINES GP-FUEL
S/N MCF1-565
PART OF 214-7934 CHASSIS AR
i01854529 SEBP3740
2232755 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-4091 [2] ELBOW  
2. 4I-0379 [1] VALVE-MANUAL  
3. 4I-7889 [2] SPACER (11X25X45-MM THK)  
4. 003-7764 [2] END-HOSE  
5. 095-1386 [9] CLAMP-HOSE  
6. 145-8862 Y [1] SEPARATOR GP-WATER  
7. 208-4135 [1] SHEET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 096-0061 [2] STRAP-CABLE  
9. 177-5852 [1] ADAPTER  
10. 1J-9671 [6] SEAL-O-RING  
11. 3K-8460 [2] PLUG (1/2-20-THD)  
12. 5K-8451 [6] CLIP  
13. 7Y-8167 [1] GROMMET (50-MM ID)  
14. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [1] NUT (M10X1.5-THD)  
16. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
17. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
18. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
19. 8T-9357 [1] ADAPTER  
20. 9M-8406 [3] CLIP (LOOP)  
21. 5P-1442 E HOSE (20CM)  
22. 5P-1442 E HOSE (315CM)  
23. 5P-1442 E HOSE (43CM)  
24. 5P-1442 E HOSE (75CM)  
25. 5P-1442 E HOSE (235CM)  
26. 178-6460 [1] HOSE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37400096
 

250-2484: LINES GP-FUEL

250-2484 LINES GP-FUEL
S/N MCF566-UP
PART OF 214-7934 CHASSIS AR
i02413774 SEBP3740
2502484 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-4091 [2] ELBOW  
2. 4I-0379 [2] VALVE-MANUAL  
3. 4I-7889 [2] SPACER (11X25X45-MM THK)  
4. 003-7764 [4] END-HOSE  
5. 095-1386 [11] CLAMP-HOSE  
6. 096-0061 [2] STRAP-CABLE  
7. 145-8862 Y [1] SEPARATOR GP-WATER  
8. 178-6460 [1] HOSE  
9. 208-4135 [1] SHEET AS  
10. 177-5852 [1] ADAPTER  
11. 1J-9671 [6] SEAL-O-RING  
12. 3K-8460 [2] PLUG (1/2-20-THD)  
13. 5K-8451 [5] CLIP  
14. 7Y-8167 [1] GROMMET (50-MM ID)  
15. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [1] NUT (M10X1.5-THD)  
17. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
18. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
19. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
20. 8T-9357 [1] ADAPTER  
21. 9M-8406 [6] CLIP (LOOP)  
22. 5P-1442 E HOSE (20-CM)  
22A. 5P-1442 E HOSE (315-CM)  
22B. 5P-1442 E HOSE (43-CM)  
22C. 5P-1442 E HOSE (75-CM)  
22D. 5P-1442 E HOSE (38-CM)  
22E. 5P-1442 E HOSE (197-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37400097
 

212-8558: LINES GP-FUEL INJECTION

212-8558 LINES GP-FUEL INJECTION
S/N MAE1-UP; MCF1-UP; 7JK55000-99999
PART OF 217-5494, 239-6530, 287-0098, 287-0099, 287-0105 ENGINE AR
ALSO AN ATTACHMENT
i01846698 SEBP3740
2128558 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6573 [6] GASKET  
2. 113-0363 [6] SUPPORT  
3. 154-0489 [6] SEAL-RUBBER  
4. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
5. 212-8599 [1] PIPE  
6. 212-8600 [1] PIPE  
7. 212-8601 [1] PIPE  
8. 212-8602 [1] PIPE  
9. 212-8603 [1] PIPE  
10. 212-8604 [1] PIPE  
11. 212-8605 [1] PIPE  
12. 094-9596 [2] CLAMP  
13. 094-9597 [2] CLAMP  
14. 5C-9553 M [2] BOLT (M6X1X16-MM)  
15. 094-9581 [8] CLAMP  
16. 6V-7357 M [4] BOLT (M6X1X25-MM)  
17. 212-8606 [1] HOSE AS  
17A. 094-7235 [1] CAP  
17B. 096-0174 [3] CLIP-HOSE  
17C. 195-8366 [2] FITTING  
17D. 212-8497 [4] HOSE  
17E. 195-8369 [4] FITTING  
17F. 195-8372 [22] CLIP  
17G. 195-8368 [6] HOSE  
17H. 212-8607 [1] HOSE  
17I. 217-5474 [1] HOSE  
18. 7X-0796 [5] LOCKWASHER (10.2X18.4X2.5-MM THK)  
19. 6V-8231 M [5] NUT (M10X1.25-THD)  
20. 193-2702 [1] PIPE  
21. 5I-7576 [1] FLANGE  
22. 096-9529 [1] SEAL-O-RING  
23. 5I-7743 [1] FITTING  
24. 125-2983 [1] FITTING  
25. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
26. 5I-5108 M [2] BOLT (M8X1.25X18-MM)  
27. 212-8509 [1] BRACKET  
28. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
29. 096-2501 [1] LOCKWASHER  
30. 212-8499 [4] STUD  
31. 5I-8070 [1] PIPE  
32. 5I-8058 [1] CONNECTOR  
33. 3B-4505 [8] LOCKWASHER  
34. 096-2500 [6] LOCKWASHER  
35. 239-6605 [1] PLATE  
36. 239-6524 [1] CLAMP  
37. 8T-4138 M [2] BOLT (M6X1X20-MM)  
39. 233-1283 [1] CLAMP  
  M   METRIC PART
 

#SEBP37400098
 

212-8470: NOZZLE GP-UNIT INJECTOR

212-8470 NOZZLE GP-UNIT INJECTOR
S/N MAE1-UP; 7JK55000-99999
PART OF 217-5494, 239-6530 ENGINE AR
ALSO AN ATTACHMENT
i01645591 SEBP3740
2128470 NOZZLE GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3006 B [1] SHIM (0.1-MM THK)  
  125-3007 B [1] SHIM (0.2-MM THK)  
  125-3008 B [1] SHIM (0.3-MM THK)  
  125-3009 B [1] SHIM (0.4-MM THK)  
  125-3010 B [1] SHIM (0.5-MM THK)  
  193-2751 B [1] SHIM (0.51-MM THK)  
  125-3011 B [1] SHIM (0.52-MM THK)  
  193-2752 B [1] SHIM (0.53-MM THK)  
  125-3012 B [1] SHIM (0.54-MM THK)  
  159-6722 B [1] SHIM (0.55-MM THK)  
  125-3013 B [1] SHIM (0.56-MM THK)  
  193-2753 B [1] SHIM (0.57-MM THK)  
  125-3014 B [1] SHIM (0.58-MM THK)  
  193-2754 B [1] SHIM (0.59-MM THK)  
2. 096-7928 [1] SPRING  
3. 5I-5175 [1] SEAT  
4. 096-9481 [1] SPACER  
5. 096-9478 [2] PIN  
6. 085-9275 [1] NUT  
7. 212-8609 [1] NOZZLE AS  
  B   USE AS REQUIRED
 

#SEBP37400099
 

233-1161: NOZZLE GP-UNIT INJECTOR

233-1161 NOZZLE GP-UNIT INJECTOR
S/N MAE1-UP; MCF1-UP
PART OF 287-0098, 287-0099, 287-0105 ENGINE AR
ALSO AN ATTACHMENT
i01986096 SEBP3740
2331161 NOZZLE GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 321C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3006 B [1] SHIM (0.1-MM THK)  
  125-3007 B [1] SHIM (0.2-MM THK)  
  125-3008 B [1] SHIM (0.3-MM THK)  
  125-3009 B [1] SHIM (0.4-MM THK)  
  125-3010 B [1] SHIM (0.5-MM THK)  
  193-2751 B [1] SHIM (0.51-MM THK)  
  125-3011 B [1] SHIM (0.52-MM THK)  
  193-2752 B [1] SHIM (0.53-MM THK)  
  125-3012 B [1] SHIM (0.54-MM THK)  
  159-6722 B [1] SHIM (0.55-MM THK)  
  125-3013 B [1] SHIM (0.56-MM THK)  
  193-2753 B [1] SHIM (0.57-MM THK)  
  125-3014 B [1] SHIM (0.58-MM THK)  
  193-2754 B [1] SHIM (0.59-MM THK)  
2. 096-7928 [1] SPRING  
3. 5I-5175 [1] SEAT  
4. 096-9481 [1] SPACER  
5. 096-9478 [2] PIN  
6. 085-9275 [1] NUT  
7. 233-1243 [1] NOZZLE AS  
  B   USE AS REQUIRED
 

Information:

Caterpillar Parts SIS Catalog 321C :

TURBOCHARGER GP
5I-8018 TURBOCHARGER GP
TURBOCHARGER GP
233-1159 TURBOCHARGER GP
MUFFLER GP
324-4172 MUFFLER GP
MUFFLER GP
266-6344 MUFFLER GP
MUFFLER GP
212-8615 MUFFLER GP
MANIFOLD GP-INLET
212-8551 MANIFOLD GP-INLET
MANIFOLD GP-EXHAUST
212-8552 MANIFOLD GP-EXHAUST
LINES GP-MUFFLER DRAIN
171-9060 LINES GP-MUFFLER DRAIN
CONTROL GP-GOVERNOR
211-5624 CONTROL GP-GOVERNOR
FILTER GP-FUEL
212-8560 FILTER GP-FUEL
GAUGE GP-SIGHT
223-3095 GAUGE GP-SIGHT
GAUGE GP-SIGHT
351-2955 GAUGE GP-SIGHT
LINES GP-FUEL
223-2755 LINES GP-FUEL
LINES GP-FUEL
250-2484 LINES GP-FUEL
LINES GP-FUEL INJECTION
212-8558 LINES GP-FUEL INJECTION
NOZZLE GP-UNIT INJECTOR
212-8470 NOZZLE GP-UNIT INJECTOR

Truck sale:

CATERPILLAR 321C 2004
 
CATERPILLAR 321C 2004
- TRACK EXCAVATORS
EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
 
$34,395 USD 
CATERPILLAR 321C 2003
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 321C 2005
 
CATERPILLAR 321C 2005
- TRACK EXCAVATORS
BLANCHARD MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.