237-4905 WIRING GP-CHASSIS S/N A6D2368-2536 PART OF 236-8961 ELECTRICAL AR 966H WHEEL LOADER

237-4905: WIRING GP-CHASSIS

237-4905 WIRING GP-CHASSIS
S/N A6D2368-2536
PART OF 236-8961 ELECTRICAL AR

Parts for your 966H WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3E-0075 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
2.	3E-5169	[1]	GUARD-SWITCH
3.	7K-1181 C	[55]	STRAP-CABLE
4.	8T-2893	[1]	LOCK GP-CYLINDER
	226-0291 J	[1]	LOCK AS
	226-0321	[1]	CAM
5.	116-4491	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	118-6365	[1]	PLATE AS
7.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	149-2612	[1]	RELAY AS (24-VOLT)(HOOD TILT MOTOR)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	158-0591 C	[1]	LOCKWASHER
10.	158-6634 Y	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
11.	164-7577 Y	[1]	SWITCH GP-BYPASS (POWER TRAIN OIL FILTER)
12.	172-4871	[1]	BRACKET AS
13.	184-6636	[1]	PLATE-INFORMATION (ENGINE SHUTOFF)
14.	188-6185	[4]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	209-4347 C	[2]	WASHER (9.91X15.24X0.76-MM THK)
17.	218-4935	[1]	SUPPRESSOR-ARC
18.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
19.	245-3257	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	7G-7917	[1]	PLUG-SEAL
	7G-7918	[1]	PLUG-SEAL
	7G-7919	[1]	PLUG-SEAL
	7K-1181	[1]	STRAP-CABLE
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	8N-1535	[1]	BELL AS-END
	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1541	[3]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	8T-8737	[74]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	9X-6772	[1]	STRAP-CABLE
	113-0580	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	106-4155	[1]	KIT-RETAINING BOLT
			(INCLUDES BOLT, RING, & SEALS)
	114-8843 E		SLEEVE-PLASTIC (385-CM)
	114-8845 E		SLEEVE-PLASTIC (80-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	9X-3402	[169]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1774	[1]	COVER-CONNECTOR
	2L-8071	[3]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4344	[1]	TERMINAL-RING (4-GA, 1/2-IN SCREW)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	131-3201	[1]	BOOT
	9X-3401	[42]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[42]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	171-5349	[2]	STRAP-MARKER
	183-5784	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	2L-8057	[1]	TERMINAL-RING (8-GA, NO. 10 SCREW)
			-OR-
	2L-8049	[1]	TERMINAL-RING (6-GA, NO. 10 SCREW)
20.	246-4489	[1]	WIRE AS
21.	349-1682	[1]	FILM-IDENTIFICATION (FUSE PANEL)
22.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)
23.	289-3038	[1]	GROMMET
24.	301-2980	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
25.	315-5389 CM	[1]	NUT (M32X1.5-THD)
26.	316-8501 C	[1]	HARNESS AS-SWITCH
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	9G-3695	[9]	PLUG-SEAL
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	114-8845 E		SLEEVE-PLASTIC (40-CM)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
27.	316-8502 C	[1]	BAR-BUS
28.	316-8503 C	[1]	BAR-BUS
29.	316-8504 C	[1]	BAR-BUS
30.	321-2964 C	[1]	GROMMET AS
31.	321-3357 C	[1]	PANEL AS
32.	321-3359 C	[1]	PLATE
33.	327-4608	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (28-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
34.	130-5300	[9]	CLIP
35.	132-5789 C	[2]	CLIP (LADDER)
36.	147-0385	[1]	CLIP
37.	149-2147 C	[6]	WASHER (7.2X14.5X2-MM THK)
38.	171-2206	[1]	CIRCUIT BREAKER AS (50-AMPERE)(ENGINE START)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
39.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
40.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
41.	298-3650	[1]	HARNESS AS-CHASSIS
	8T-8737	[3]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (100-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
42.	313-3280 C	[2]	NUT (M6X1-THD)
43.	0L-1407	[2]	GROMMET
44.	1S-0994	[1]	CLIP (LOOP)
45.	3E-6769	[1]	SEAL-O-RING
46.	3F-9556 C	[2]	LOCKWASHER
47.	3J-1907	[1]	SEAL-O-RING
48.	3P-3839	[1]	GROMMET
49.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
50.	4B-4274 C	[6]	WASHER (5.5X13X1.2-MM THK)
51.	4B-4863 C	[6]	WASHER (4.7X11X1.2-MM THK)
52.	4D-7388	[5]	CLIP (LOOP)
53.	4P-7581 C	[2]	CLIP (LADDER)
54.	5P-4115 C	[2]	WASHER-HARD (7.2X19X2-MM THK)
55.	5P-9085	[1]	CLIP (LOOP)
56.	5P-9297	[3]	CLIP (LOOP)
57.	6N-9349	[1]	CIRCUIT BREAKER AS (30-AMPERE)(UNSWITCHED BAT POWER TO CAB)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
58.	6T-3644	[1]	CIRCUIT BREAKER AS (20-AMPERE)(HOOD TILT ACTUATOR)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
59.	7C-4354	[3]	CLIP
60.	7D-1728	[1]	CLIP
61.	7D-4092	[1]	CLIP
62.	7U-4891	[6]	SCREW (10-32X1-IN)
63.	7U-4892	[6]	SCREW (8-32X0.75-IN)
64.	8M-2772	[1]	CLIP (LOOP)
65.	8M-2773	[3]	CLIP (LOOP)
66.	8T-0122 C	[6]	NUT-FULL (1/4-28-THD)
67.	8T-0193 C	[2]	NUT-FULL (5/16-24-THD)
68.	8T-4121	[26]	WASHER-HARD (11X21X2.5-MM THK)
69.	8T-4133 M	[11]	NUT (M10X1.5-THD)
70.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
71.	8T-4138 CM	[3]	BOLT (M6X1X20-MM)
72.	8T-4181 CM	[2]	BOLT (M6X1X20-MM)
73.	8T-4205 C	[7]	WASHER-HARD (7.2X14.5X2-MM THK)
74.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
75.	8T-4244 M	[1]	NUT (M12X1.75-THD)
76.	8T-4970 CM	[3]	BOLT (M6X1X14-MM)
77.	8T-5436 M	[4]	BOLT (M10X1.5X130-MM)
78.	9K-0700 C	[1]	GROMMET
79.	126-8472 CE		SEAL (129-CM)
79A.	126-8472 CE		SEAL (13-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

306-5351: WIRING GP-CHASSIS

WIRING GP-CHASSIS

306-5351 WIRING GP-CHASSIS -VARIABLE PITCH FAN
S/N A6D1-UP
PART OF 305-3322 CONTROL AR-FAN

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	306-5353	[1]	HARNESS AS-CHASSIS (VARIABLE PITCH FAN)
	102-8802		KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	114-8843 E		SLEEVE-PLASTIC (80-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2.	269-7678	[1]	CLIP
3.	132-5789	[1]	CLIP (LADDER)
4.	3S-2093	[3]	STRAP-CABLE
5.	4P-7581	[1]	CLIP (LADDER)
6.	7K-1181 B	[39]	STRAP-CABLE
7.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
9.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

328-4397: WIRING GP-CHASSIS

WIRING GP-CHASSIS

328-4397 WIRING GP-CHASSIS
S/N A6D2537-UP
PART OF 236-8961 ELECTRICAL AR

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
2.	144-4613	[2]	ANGLE AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3.	172-4871	[1]	BRACKET AS
	6V-6716	[2]	RIVET-TRUSS HEAD
	109-1645	[1]	CLIP
4.	188-6185	[4]	GROMMET
5.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
6.	201-1024	[1]	BRACKET
7.	204-8000	[11]	MOUNTING-CABLE TIE
8.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)
9.	289-3038	[1]	GROMMET
10.	327-4608	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 20-GA)
	9X-1813 E		SLEEVE (28-CM)
11.	328-4398 Y	[1]	PANEL GP-CIRCUIT BREAKER
12.	328-4400	[1]	HARNESS AS-CHASSIS (SERVICE CENTER)(SERVICE CENTER)
	8T-8737	[3]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (100-CM)
	E		SLEEVE-PLASTIC (20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
13.	Y	[1]	FASTENER GP-WIRING HARNESS
14.	328-4419	[3]	BRACKET AS
15.	067-2551	[1]	CLIP
16.	0L-1407	[2]	GROMMET
17.	124-1479	[1]	CLIP
18.	130-5300	[7]	CLIP
19.	132-5789	[2]	CLIP (LADDER)
20.	193-3973	[11]	STRAP-CABLE
21.	301-2980	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 20-GA)
22.	3E-6769	[1]	SEAL-O-RING
23.	3J-1907	[1]	SEAL-O-RING
24.	3P-3839	[1]	GROMMET
25.	3S-2093	[14]	STRAP-CABLE
26.	4D-7388	[6]	CLIP (LOOP)
27.	4D-7794	[2]	CLIP
28.	4P-7581	[3]	CLIP (LADDER)
29.	4P-8134	[2]	CLIP (LADDER)
30.	5P-9085	[1]	CLIP (LOOP)
31.	5P-9297	[1]	CLIP (LOOP)
32.	7K-1181	[33]	STRAP-CABLE
33.	8M-2773	[1]	CLIP (LOOP)
34.	8T-4121	[37]	WASHER-HARD (11X21X2.5-MM THK)
35.	8T-4133 M	[6]	NUT (M10X1.5-THD)
36.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
37.	8T-4137 M	[24]	BOLT (M10X1.5X20-MM)
38.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

272-9689: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

272-9689 WIRING GP-ELECTROHYDRAULIC -2-LEVER CONTROL, WITH DOWNSHIFT
S/N A6D1-UP
PART OF 268-9653 CONTROL GP-ELECTROHYDRAULIC

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	170-1821	[1]	SWITCH AS-PUSH BUTTON (HORN)
	6F-0253	[1]	LOCKWASHER
	172-3511	[1]	NUT (5/8-24-THD)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	242-6099	[1]	CLIP (LOOP)
4.	307-4671 Y	[1]	CONTROL GP-HANDLE (PILOT CONTROL)(TILT)
4A.	307-4671 Y	[1]	CONTROL GP-HANDLE (PILOT CONTROL)(LIFT)
5.	249-5602	[1]	GUARD-SWITCH
6.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
7.	263-1493	[1]	SWITCH GP-PUSH BUTTON (DOWNSHIFT)
	6F-0253	[1]	LOCKWASHER
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	172-3511	[1]	NUT (5/8-24-THD)
8.	285-9124	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
	5P-0765 E		HOSE (137-CM)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	8T-8737	[15]	PLUG-SEAL
	9X-3402	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.5-M)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	185-1861	[23]	SEAL-WIRE
	245-7434	[3]	KIT-CONNECTING PLUG (10-PIN)
			(INCLUDES PLUG CONNECTOR, WIRE ASSEMBLIES & PLUGS)
9.	228-6089	[2]	PLUG (ROCKER SWITCH)
10.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	4S-1962	[2]	CLIP (LOOP)
13.	5C-7261 M	[1]	NUT (M8X1.25-THD)
14.	6V-3341	[1]	GROMMET
15.	8R-3695	[3]	GROMMET
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-2045 M	[8]	SCREW-TRUSS HEAD (M6X1X20-MM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

272-9691: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

272-9691 WIRING GP-ELECTROHYDRAULIC -3-LEVER CONTROL
S/N A6D1-UP
PART OF 268-9654 CONTROL GP-ELECTROHYDRAULIC
Type 1

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	170-1821	[1]	SWITCH AS-PUSH BUTTON (HORN)
	6F-0253	[1]	LOCKWASHER
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	172-3511	[1]	NUT (5/8-24-THD)
2.	243-3166 Y	[1]	CONTROL GP-HANDLE (TILT)
2A.	243-3166 Y	[1]	CONTROL GP-HANDLE (LIFT)
2B.	243-3166 Y	[1]	CONTROL GP-HANDLE (AUXILIARY)
3.	249-5602	[1]	GUARD-SWITCH
4.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
5.	263-1493	[1]	SWITCH GP-PUSH BUTTON (DOWNSHIFT)
	6F-0253	[1]	LOCKWASHER
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	172-3511	[1]	NUT (5/8-24-THD)
6.	285-9124	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
	5P-0765 E		HOSE (137-CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	245-7434	[3]	KIT-CONNECTING PLUG (10-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[15]	PLUG-SEAL
	185-1861	[23]	SEAL-WIRE
	9X-3402	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[24]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	235-4123	[21]	TERMINAL (18-GA TO 20-GA)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
7.	228-6089	[2]	PLUG (ROCKER SWITCH)
8.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	9X-2045 M	[12]	SCREW-TRUSS HEAD (M6X1X20-MM)
11.	3S-2093	[4]	STRAP-CABLE
12.	4S-1962	[2]	CLIP (LOOP)
13.	5C-7261 M	[1]	NUT (M8X1.25-THD)
14.	6V-3341	[1]	GROMMET
15.	8R-3695	[3]	GROMMET
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	242-6099	[1]	CLIP (LOOP)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

272-9691: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

272-9691 WIRING GP-ELECTROHYDRAULIC -3-LEVER CONTROL
S/N A6D1-UP
PART OF 268-9654 CONTROL GP-ELECTROHYDRAULIC
Type 2

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	170-1821	[1]	SWITCH AS-PUSH BUTTON (HORN)
	6F-0253	[1]	LOCKWASHER
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	172-3511	[1]	NUT (5/8-24-THD)
2.	307-4671 CY	[1]	CONTROL GP-HANDLE (PILOT CONTROL)(TILT)
2A.	307-4671 CY	[1]	CONTROL GP-HANDLE (PILOT CONTROL)(LIFT)
2B.	307-4671 CY	[1]	CONTROL GP-HANDLE (PILOT CONTROL)(AUXILIARY)
3.	249-5602	[1]	GUARD-SWITCH
4.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
5.	263-1493	[1]	SWITCH GP-PUSH BUTTON (DOWNSHIFT)
	6F-0253	[1]	LOCKWASHER
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	172-3511	[1]	NUT (5/8-24-THD)
6.	285-9124	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
	5P-0765 E		HOSE (137-CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	245-7434	[3]	KIT-CONNECTING PLUG (10-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[15]	PLUG-SEAL
	185-1861	[23]	SEAL-WIRE
	9X-3402	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[24]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	235-4123	[21]	TERMINAL (18-GA TO 20-GA)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
7.	228-6089	[2]	PLUG (ROCKER SWITCH)
8.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	9X-2045 M	[12]	SCREW-TRUSS HEAD (M6X1X20-MM)
11.	3S-2093	[4]	STRAP-CABLE
12.	4S-1962	[2]	CLIP (LOOP)
13.	5C-7261 M	[1]	NUT (M8X1.25-THD)
14.	6V-3341	[1]	GROMMET
15.	8R-3695	[3]	GROMMET
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	242-6099	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

277-3560: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

277-3560 WIRING GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N A6D1-UP
PART OF 277-0705 CONTROL GP-ELECTROHYDRAULIC
Type 1

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	242-6099	[1]	CLIP (LOOP)
3.	249-5602	[1]	GUARD-SWITCH
4.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
5.	274-2371 Y	[1]	CONTROL GP-JOYSTICK
6.	289-9614	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	245-7434	[2]	KIT-CONNECTING PLUG (10-PIN)
7.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
8.	228-6089	[1]	PLUG (ROCKER SWITCH)
9.	4S-1962	[2]	CLIP (LOOP)
10.	5C-7261 M	[1]	NUT (M8X1.25-THD)
11.	6V-3341	[1]	GROMMET
12.	8R-3695	[3]	GROMMET
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

277-3560: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

277-3560 WIRING GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N A6D1-UP
PART OF 277-0705 CONTROL GP-ELECTROHYDRAULIC
Type 2

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	242-6099	[1]	CLIP (LOOP)
3.	249-5602	[1]	GUARD-SWITCH
4.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
5.	462-5456 CY	[1]	CONTROL GP-JOYSTICK
6.	289-9614	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	245-7434	[2]	KIT-CONNECTING PLUG (10-PIN)
7.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
8.	228-6089	[1]	PLUG (ROCKER SWITCH)
9.	4S-1962	[2]	CLIP (LOOP)
10.	5C-7261 M	[1]	NUT (M8X1.25-THD)
11.	6V-3341	[1]	GROMMET
12.	8R-3695	[3]	GROMMET
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

277-3561: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

277-3561 WIRING GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N A6D1-1260
PART OF 277-0706 CONTROL GP-ELECTROHYDRAULIC

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	170-1821	[1]	SWITCH AS-PUSH BUTTON (HORN)
	6F-0253	[1]	LOCKWASHER
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	172-3511	[1]	NUT (5/8-24-THD)
3.	242-6099	[1]	CLIP (LOOP)
4.	249-5602	[1]	GUARD-SWITCH
5.	251-1197	[1]	SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)
6.	277-3281	[1]	CONTROL GP-JOYSTICK (3-FUNCTION, W/FNR, DOWNSHIFT)
7.	289-9614	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	245-7434	[2]	KIT-CONNECTING PLUG (10-PIN)
8.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
9.	228-6089	[1]	PLUG (ROCKER SWITCH)
10.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	4S-1962	[2]	CLIP (LOOP)
13.	5C-7261 M	[1]	NUT (M8X1.25-THD)
14.	6V-3341	[1]	GROMMET
15.	8R-3695	[2]	GROMMET
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

277-3561: WIRING GP-ELECTROHYDRAULIC

WIRING GP-ELECTROHYDRAULIC

277-3561 WIRING GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N A6D1261-2477
PART OF 277-0706 CONTROL GP-ELECTROHYDRAULIC

Parts for your 966H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	170-1821	[1]	SWITCH AS-PUSH BUTTON (HORN)
	6F-0253	[1]	LOCKWASHER
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	172-3511	[1]	NUT (5/8-24-THD)
3.	242-6099	[1]	CLIP (LOOP)
5.	284-3623 C	[1]	SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT)
6.	277-3281 Y	[1]	CONTROL GP-JOYSTICK (3-FUNCTION, W/FNR, DOWNSHIFT)
7.	289-9614	[1]	HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC CONTROL POD)
8.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
9.	228-6089	[1]	PLUG (ROCKER SWITCH)
10.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	4S-1962	[2]	CLIP (LOOP)
13.	5C-7261 M	[1]	NUT (M8X1.25-THD)
14.	6V-3341	[1]	GROMMET
15.	8R-3695	[2]	GROMMET
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	218-4935 C	[1]	SUPPRESSOR-ARC
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORWARD-NEUTRAL-REVERSE (FNR) SWITCH ON CERTAIN 938H, 950H, 962H, 966H, AND 972H WHEEL LOADERS OR IT38H AND IT62H INTEGRATED TOOL CARRIERS

Caterpillar Parts SIS Catalog 966H :

Truck sale:

Caterpillar 966H
- Wheel Loaders
HOLT CAT

85,000

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
BOYD CAT COMPANY

95,000

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO

70,000

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.

322,210

Caterpillar 966H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA