OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICOPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP37431240
268-9653: CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 272-7285 Y | [1] | PLATE & FILM GP (2-LEVER CONTROL) | |
| 2. | 285-8270 CY | [1] | CONSOLE GP-OPERATOR (2-LEVER CONTROL) | |
| 3. | 272-9689 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 4. | 8T-4197 CM | [1] | BOLT (M8X1.25X40-MM) | |
| 5. | 8T-4224 C | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 8T-4908 CM | [3] | BOLT (M8X1.25X25-MM) | |
| 7. | 4E-8722 | [4] | NUT (RETAINER) | |
| 8. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 9. | 290-1262 | [1] | CUSHION AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431241
268-9654: CONTROL GP-ELECTROHYDRAULIC
268-9654 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N A6D1-UP
S/N A6D1-UP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT)(THIRD FUNCTION SELECT) | |
| 3. | 272-7286 Y | [1] | PLATE & FILM GP (3-LEVER CONTROL) | |
| 4. | 285-8271 Y | [1] | CONSOLE GP-OPERATOR (3-LEVER CONTROL) | |
| 5. | 290-1262 | [1] | CUSHION AS | |
| 6. | 272-9691 Y | [1] | WIRING GP-ELECTROHYDRAULIC (3-LEVER CONTROL) | |
| 7. | 8T-4197 M | [1] | BOLT (M8X1.25X40-MM) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 8T-4908 M | [3] | BOLT (M8X1.25X25-MM) | |
| 10. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431242
277-0705: CONTROL GP-ELECTROHYDRAULIC
277-0705 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N A6D1-UP
Type 1
S/N A6D1-UP
Type 1
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 268-9360 Y | [1] | CONSOLE GP-OPERATOR (JOYSTICK CONTROL) | |
| 2. | Y | [1] | PLATE & FILM GP (JOYSTICK CONTROL, 2-FUNCTION) | |
| 3. | 277-3560 Y | [1] | WIRING GP-ELECTROHYDRAULIC (JOYSTICK, 2-FUNCTION) | |
| 4. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 5. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431243
277-0705: CONTROL GP-ELECTROHYDRAULIC
277-0705 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N A6D1-UP
Type 2
S/N A6D1-UP
Type 2
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 C | [3] | NUT (RETAINER) | |
| 2. | Y | [1] | PLATE & FILM GP (JOYSTICK CONTROL, 2-FUNCTION) | |
| 3. | 277-3560 Y | [1] | WIRING GP-ELECTROHYDRAULIC (JOYSTICK, 2-FUNCTION) | |
| 4. | 286-1863 CY | [1] | CONSOLE GP-OPERATOR (JOYSTICK CONTROL) | |
| 5. | 290-8116 C | [1] | CUSHION AS | |
| 6. | 8T-4197 CM | [1] | BOLT (M8X1.25X40-MM) | |
| 7. | 8T-4224 C | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8T-4908 CM | [3] | BOLT (M8X1.25X25-MM) | |
| 9. | 9X-2044 CM | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431244
277-0706: CONTROL GP-ELECTROHYDRAULIC
277-0706 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N A6D1-2477
S/N A6D1-2477
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [3] | NUT (RETAINER) | |
| 2. | 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT)(THIRD FUNCTION SELECT) | |
| 3. | Y | [1] | PLATE & FILM GP (JOYSTICK CONTROL, 3-FUNCTION) | |
| 4. | 277-3561 Y | [1] | WIRING GP-ELECTROHYDRAULIC (JOYSTICK, 3-FUNCTION) | |
| 5. | 286-1863 Y | [1] | CONSOLE GP-OPERATOR (JOYSTICK CONTROL) | |
| 6. | 290-8116 | [1] | CUSHION AS | |
| 7. | 8T-4197 M | [1] | BOLT (M8X1.25X40-MM) | |
| 8. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 8T-4908 M | [3] | BOLT (M8X1.25X25-MM) | |
| 10. | 9X-2044 M | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431245
319-8253: CONTROL GP-ELECTROHYDRAULIC
319-8253 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N A6D1-UP
Type 1
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@243-1941@@@@@, @@@@@319-8254@@@@@, @@@@@236-9092@@@@@, @@@@@246-1920@@@@@, @@@@@236-9091@@@@@, @@@@@243-1941@@@@@
S/N A6D1-UP
Type 1
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@243-1941@@@@@, @@@@@319-8254@@@@@, @@@@@236-9092@@@@@, @@@@@246-1920@@@@@, @@@@@236-9091@@@@@, @@@@@243-1941@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 5. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 6. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 7. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 8. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 254-9150 | [1] | FILM-CONTROL | |
| 11. | 262-5238 | [1] | COVER | |
| 12. | 262-5239 | [1] | HOUSING AS | |
| 13. | 263-1995 | [1] | PLATE AS | |
| 14. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 15. | 277-3281 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION, W/FNR, DOWNSHIFT) | |
| 16. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 17. | 156-6175 | [1] | CLIP (LADDER) | |
| 18. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 19. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 20. | 8R-3695 | [2] | GROMMET | |
| 21. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 22. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 27. | 6V-3987 D | [2] | SEAL (0.062-M EACH) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431246
319-8253: CONTROL GP-ELECTROHYDRAULIC
319-8253 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N A6D1-UP
Type 2
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@243-1941@@@@@, @@@@@319-8254@@@@@, @@@@@236-9092@@@@@, @@@@@246-1920@@@@@, @@@@@236-9091@@@@@, @@@@@243-1941@@@@@
S/N A6D1-UP
Type 2
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@243-1941@@@@@, @@@@@319-8254@@@@@, @@@@@236-9092@@@@@, @@@@@246-1920@@@@@, @@@@@236-9091@@@@@, @@@@@243-1941@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 5. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 6. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 7. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 8. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 345-2046 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL) | |
| 11. | 262-5238 | [1] | COVER | |
| 12. | 262-5239 | [1] | HOUSING AS | |
| 13. | 263-1995 | [1] | PLATE AS | |
| 14. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 15. | 277-3281 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION, W/FNR, DOWNSHIFT) | |
| 16. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9X-3402 | [42] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [42] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 17. | 156-6175 | [1] | CLIP (LADDER) | |
| 18. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 19. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 20. | 8R-3695 | [2] | GROMMET | |
| 21. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 22. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 27. | 6V-3987 D | [2] | SEAL (0.062-M EACH) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431247
319-8253: CONTROL GP-ELECTROHYDRAULIC
319-8253 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N A6D1-UP
Type 3
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@243-1941@@@@@, @@@@@319-8254@@@@@, @@@@@236-9092@@@@@, @@@@@246-1920@@@@@, @@@@@236-9091@@@@@, @@@@@243-1941@@@@@
S/N A6D1-UP
Type 3
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@243-1941@@@@@, @@@@@319-8254@@@@@, @@@@@236-9092@@@@@, @@@@@246-1920@@@@@, @@@@@236-9091@@@@@, @@@@@243-1941@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [4] | NUT-CLIP (M6X1-THD) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 5. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 6. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 7. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 8. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 345-2046 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL) | |
| 11. | 262-5238 | [1] | COVER | |
| 12. | 262-5239 | [1] | HOUSING AS | |
| 6V-9632 M | [17] | NUT-WELD (M6X1-THD) | ||
| 13. | 263-1995 | [1] | PLATE AS | |
| 14. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 15. | 462-5457 CY | [1] | CONTROL GP-JOYSTICK (3-FUNCTION, W/FNR, DOWNSHIFT) | |
| 16. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9X-3402 | [42] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [42] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 17. | 156-6175 | [1] | CLIP (LADDER) | |
| 18. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 19. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 20. | 8R-3695 | [2] | GROMMET | |
| 21. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 22. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 27. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431248
319-8254: CONTROL GP-ELECTROHYDRAULIC
319-8254 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N A6D1-UP
Type 1
S/N A6D1-UP
Type 1
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 6. | 245-6447 | [1] | CUSHION AS | |
| 7. | 247-4969 | [1] | PLATE | |
| 8. | 345-2045 | [1] | FILM-INFORMATION (JOYSTICK)(JOYSTICK) | |
| 9. | 262-5238 | [1] | COVER | |
| 10. | 262-5239 | [1] | HOUSING AS | |
| 11. | 263-1995 | [1] | PLATE AS | |
| 12. | 274-2371 Y | [1] | CONTROL GP-JOYSTICK | |
| 13. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 14. | 156-6175 | [1] | CLIP (LADDER) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 17. | 8R-3695 | [3] | GROMMET | |
| 18. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 19. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 20. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 21. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 22. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 23. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 6V-3987 D | SEAL (0.07-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431249
319-8254: CONTROL GP-ELECTROHYDRAULIC
319-8254 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N A6D1-UP
Type 2
S/N A6D1-UP
Type 2
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [4] | NUT-CLIP (M6X1-THD) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 6. | 245-6447 | [1] | CUSHION AS | |
| 7. | 247-4969 | [1] | PLATE | |
| 8. | 345-2045 | [1] | FILM-INFORMATION (JOYSTICK) | |
| 9. | 262-5238 | [1] | COVER | |
| 10. | 262-5239 | [1] | HOUSING AS | |
| 11. | 263-1995 | [1] | PLATE AS | |
| 12. | 462-5456 CY | [1] | CONTROL GP-JOYSTICK | |
| 13. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9X-3402 | [42] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [42] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 14. | 156-6175 | [1] | CLIP (LADDER) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 17. | 8R-3695 | [3] | GROMMET | |
| 18. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 19. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 20. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 21. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 22. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 23. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
Special Instruction
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Custom Service Information
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
Testing and Adjusting
Position Sensor for the Electrohydraulic Control Levers or Joystick Control (Electronic Technician) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Electrohydraulic Control Levers (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Troubleshooting
Disassembly and Assembly
Service Magazine
New Tag for the Work Tool Configuration and Calibration of Medium Wheel Loaders {5702, 6700, 7000}
2009/10/12
2009/10/12
An Improved Multi-Function Joystick is Now Available for Certain Cat<SUP>®</SUP> Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
