OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICCONTROL GP-HANDLE
CONTROL GP-JOYSTICK
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP37431250
332-9284: CONTROL GP-ELECTROHYDRAULIC
332-9284 CONTROL GP-ELECTROHYDRAULIC
S/N A6D1-2445
PART OF 243-1940 CONTROL GP-ELECTROHYDRAULIC
S/N A6D1-2445
PART OF 243-1940 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 7. | 245-6447 | [1] | CUSHION AS | |
| 8. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 262-5237 | [1] | COVER | |
| 11. | 262-5239 | [1] | HOUSING AS | |
| 12. | 262-5240 | [1] | PLATE AS | |
| 13. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 14. | 307-4671 Y | [3] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 15. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8R-3695 | [2] | GROMMET | |
| 17. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 19. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 20. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 6V-3987 D | SEAL (0.2-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431251
332-9284: CONTROL GP-ELECTROHYDRAULIC
332-9284 CONTROL GP-ELECTROHYDRAULIC
S/N A6D2446-UP
PART OF 243-1940 CONTROL GP-ELECTROHYDRAULIC
S/N A6D2446-UP
PART OF 243-1940 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 7. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 262-5237 | [1] | COVER | |
| 11. | 262-5239 | [1] | HOUSING AS | |
| 12. | 262-5240 | [1] | PLATE AS | |
| 13. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT)(THIRD FUNCTION SELECT) | ||
| 14. | 307-4671 Y | [3] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 15. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8R-3695 | [2] | GROMMET | |
| 17. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 19. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 20. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37431252
243-3166: CONTROL GP-HANDLE
243-3166 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY
S/N A6D1-1094
PART OF 243-1089, 243-1940 CONTROL GP-ELECTROHYDRAULIC, 272-9691 WIRING GP-ELECTROHYDRAULIC
S/N A6D1-1094
PART OF 243-1089, 243-1940 CONTROL GP-ELECTROHYDRAULIC, 272-9691 WIRING GP-ELECTROHYDRAULIC
For full view, you need register
#SEBP37431253
307-4671: CONTROL GP-HANDLE
307-4671 CONTROL GP-HANDLE -BUCKET
S/N A6D1095-UP
PART OF 243-1089, 332-9284 CONTROL GP-ELECTROHYDRAULIC, 272-9689, 272-9691 WIRING GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@361-6015@@@@@
S/N A6D1095-UP
PART OF 243-1089, 332-9284 CONTROL GP-ELECTROHYDRAULIC, 272-9689, 272-9691 WIRING GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@361-6015@@@@@
For full view, you need register
#SEBP37431254
319-9556: CONTROL GP-HANDLE
319-9556 CONTROL GP-HANDLE -LIFT, TILT, DOWNSHIFT SWITCH
S/N A6D1-UP
PART OF 319-9558, 462-5454 CONTROL GP-JOYSTICK
S/N A6D1-UP
PART OF 319-9558, 462-5454 CONTROL GP-JOYSTICK
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBP37431255
319-9557: CONTROL GP-HANDLE
319-9557 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY, DOWNSHIFT SWITCH
S/N A6D1723-UP
PART OF 319-9559 CONTROL GP-JOYSTICK
S/N A6D1723-UP
PART OF 319-9559 CONTROL GP-JOYSTICK
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBP37431256
361-6015: CONTROL GP-HANDLE
361-6015 CONTROL GP-HANDLE
S/N A6D1-UP
SINGLE AXIS LEVER
FIELD REPLACEMENT FOR @@@@@307-4671@@@@@
S/N A6D1-UP
SINGLE AXIS LEVER
FIELD REPLACEMENT FOR @@@@@307-4671@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBP37431257
245-7649: CONTROL GP-JOYSTICK
245-7649 CONTROL GP-JOYSTICK -3-FUNCTION, WITH DOWNSHIFT
S/N A6D1-1722
PART OF 243-1946 CONTROL GP-ELECTROHYDRAULIC
S/N A6D1-1722
PART OF 243-1946 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 254-9140 | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUX, DOWNSHIFT SW) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 3. | 279-6641 | [1] | BOOT | |
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 186-3735 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [2] | PLUG-SEAL | |
| 10. | 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | |
| 11. | 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW)(HORN) | |
| M | METRIC PART | |||
#SEBP37431258
245-7650: CONTROL GP-JOYSTICK
245-7650 CONTROL GP-JOYSTICK -2-FUNCTION, WITH DOWNSHIFT
S/N A6D1-UP
PART OF 243-1941 CONTROL GP-ELECTROHYDRAULIC
S/N A6D1-UP
PART OF 243-1941 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 254-9139 | [1] | CONTROL GP-HANDLE (LIFT, TILT, DOWNSHIFT SWITCH) | |
| 8T-8737 | [6] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 3. | 279-6641 | [1] | BOOT | |
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 186-3735 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [6] | PLUG-SEAL | |
| 10. | 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | |
| 11. | 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW)(HORN) | |
| M | METRIC PART | |||
#SEBP37431259
274-2371: CONTROL GP-JOYSTICK
274-2371 CONTROL GP-JOYSTICK -2-FUNCTION, WITH FNR, DOWNSHIFT
S/N A6D1-UP
PART OF 319-8254 CONTROL GP-ELECTROHYDRAULIC, 277-3560 WIRING GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@462-5456@@@@@
S/N A6D1-UP
PART OF 319-8254 CONTROL GP-ELECTROHYDRAULIC, 277-3560 WIRING GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@462-5456@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 2. | 279-6641 | [1] | BOOT | |
| 3. | 277-3279 | [1] | CONTROL GP-HANDLE (LIFT, TILT, FNR, DOWNSHIFT) | |
| 8T-8737 | [4] | PLUG-SEAL | ||
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 20-GA) | |
| 9. | 8T-8737 | [4] | PLUG-SEAL | |
| M | METRIC PART | |||
Information:
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
Special Instruction
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
Procedure to Install Forward/Neutral/Reverse (FNR) Switch{5702, 7332}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Custom Service Information
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-3166 CONTROL GROUP (SINGLE AXIS IMPLEMENT LEVER) ON CERTAIN 950H, 962H, 966H, 972H, AND IT62H MACHINES
Testing and Adjusting
Position Sensor for the Electrohydraulic Control Levers or Joystick Control (Electronic Technician) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Electrohydraulic Control Levers (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Troubleshooting
Disassembly and Assembly
Service Magazine
New Tag for the Work Tool Configuration and Calibration of Medium Wheel Loaders {5702, 6700, 7000}
2009/10/12
2009/10/12
An Improved Multi-Function Joystick is Now Available for Certain Cat<SUP>®</SUP> Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
