AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

237-9753 PLUG GP-ENGINE S/N MHX145-1159 PART OF 234-7851 ENGINE AR-COMPLETE CANNOT BE USED WITH AIR COMPRESSOR 972H


BASIC ENGINE
CYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP

WHEEL LOADER 972H WHEEL LOADER A7D
 972H Wheel Loader A7D00001-UP (MACHINE) POWERED BY C13 Engine SEBP3744 972H A7D   (2005)

BASIC ENGINE

CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
PLUG GP-ENGINE
237-9753 PLUG GP-ENGINE
PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
 

#SEBP37440100
 

237-9753: PLUG GP-ENGINE

237-9753 PLUG GP-ENGINE
S/N MHX145-1159
PART OF 234-7851 ENGINE AR-COMPLETE
CANNOT BE USED WITH AIR COMPRESSOR
i02096344 SEBP3744
2379753 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8493 [1] CAP-FLARED  
2. 353-5125 [1] PLUG AS  
  6V-3251 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
3. 353-5126 [1] PLUG AS  
  6V-6609 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
 

#SEBP37440101
 

269-6164: PLUG GP-ENGINE

269-6164 PLUG GP-ENGINE
S/N TXF1-UP; MHX1159-UP
PART OF 234-7849, 234-7851, 291-6602, 349-4469 ENGINE AR-COMPLETE
i02443220 SEBP3744
2696164 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 315-9859 [1] PLUG AS  
  9S-8008 [1] PLUG (1-1/16-12-THD)  
  238-5082 [1] SEAL-O-RING  
2. 353-5125 [1] PLUG AS  
  6V-3251 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
3. 353-5126 [1] PLUG AS  
  6V-6609 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
 

#SEBP37440102
 

123-0789: PULLEY GP-ALTERNATOR

123-0789 PULLEY GP-ALTERNATOR
S/N TXF1-UP; MHX145-UP
3.34:1 DRIVE RATIO. 57 MM (2.24 IN) DIAMETER PULLEY
PART OF 234-7849, 234-7851, 291-6602, 349-4469 ENGINE AR-COMPLETE
FOR USE WITH 190.5 MM (7.5 IN) DIAMETER CRANKSHAFT PULLEY, 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY
i00513542 SEBP3744
1230789 PULLEY GP-ALTERNATOR Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-0790 [1] PULLEY (8-GROOVE)(ALTERNATOR)  
 

#SEBP37440103
 

230-7168: PULLEY GP-CRANKSHAFT

230-7168 PULLEY GP-CRANKSHAFT
S/N TXF1-UP; MHX145-UP
PART OF 234-7849, 234-7851, 291-6602, 349-4469 ENGINE AR-COMPLETE
i02088076 SEBP3744
2307168 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-7167 [1] PULLEY (8-GROOVE)(CRANKSHAFT)  
 

#SEBP37440104
 

240-8461: ROCKER ARM GP

240-8461 ROCKER ARM GP -INLET
S/N MHX145-3401
PART OF 241-0835 ROCKER ARM GP
i02121369 SEBP3744
2408461 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-4365 M [1] SCREW-ADJUSTMENT (M10X1.5-THD)  
2. 2Y-5829 M [1] NUT (M10X1.5-THD)  
3. 240-8460 [1] ROCKER ARM AS (INLET)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37440105
 

240-8463: ROCKER ARM GP

240-8463 ROCKER ARM GP -EXHAUST
S/N MHX145-3401
PART OF 241-0835 ROCKER ARM GP
i02121424 SEBP3744
2408463 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-4365 M [1] SCREW-ADJUSTMENT (M10X1.5-THD)  
2. 240-8462 [1] ROCKER ARM AS (EXHAUST)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37440106
 

241-0835: ROCKER ARM GP

241-0835 ROCKER ARM GP
S/N MHX145-3401
PART OF 240-7272 VALVE MECHANISM GP
i02177064 SEBP3744
2410835 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 242-7418 [1] BASE  
2. 242-1401 [2] BASE AS  
3. 224-4418 [1] SHAFT AS  
  3S-6605 [2] PLUG-CUP  
4. 241-0845 CY [2] ROCKER ARM GP (UNIT INJECTOR)  
5. 240-8461 Y [2] ROCKER ARM GP (INLET)  
6. 240-8463 Y [2] ROCKER ARM GP (EXHAUST)  
7. 241-0847 M [2] BOLT (M12X1.75X93-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37440107
 

241-0845: ROCKER ARM GP

241-0845 ROCKER ARM GP -UNIT INJECTOR
S/N MHX145-3401
PART OF 241-0835 ROCKER ARM GP
i02011469 SEBP3744
2410845 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-8721 [1] BUTTON  
2. 229-5279 [1] SCREW-ADJUSTMENT  
3. 241-0844 [1] ROCKER ARM AS (UNIT INJECTOR)  
  2D-6642 [2] BALL  
4. 8L-2777 [1] SEAL-O-RING  
5. 245-6095 [1] NUT-HEX THIN (M12X1.5-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37440108
 

260-0251: ROCKER ARM GP

260-0251 ROCKER ARM GP -UNIT INJECTOR
S/N TXF1-UP; MHX3402-UP
PART OF 260-0252, 396-4102 ROCKER ARM GP
i02343172 SEBP3744
2600251 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-8721 [1] BUTTON  
2. 274-4490 [1] SCREW-ADJUSTMENT  
3. 260-0915 [1] ROCKER ARM AS (UNIT INJECTOR)  
  2D-6642 [1] BALL  
4. 8L-2777 [1] SEAL-O-RING  
5. 245-6095 [1] NUT-HEX THIN (M12X1.5-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37440109
 

260-0252: ROCKER ARM GP

260-0252 ROCKER ARM GP
S/N TXF1-UP; MHX3402-UP
PART OF 240-7272 VALVE MECHANISM GP
i02343151 SEBP3744
2600252 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 224-4418 [1] SHAFT AS  
1A. 3S-6605 [2] PLUG-CUP  
2. 242-1401 [2] BASE AS  
3. 242-7418 [1] BASE  
4. 260-0251 Y [2] ROCKER ARM GP (UNIT INJECTOR)  
5. 261-2290 Y [2] ROCKER ARM GP (INLET)  
6. 261-2294 Y [2] ROCKER ARM GP (EXHAUST)  
7. 241-0847 M [2] BOLT (M12X1.75X93-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Main Bearing Journal
C11 and C13 Engines
Cylinder Liner
C11 and C13 Engines
Main Bearing Journal
C11 and C13 Engines
Piston Cooling Jet
C11 and C13 Engines
Piston Cooling Jet
C11 and C13 Engines
Cylinder Liner
C11 and C13 Engines
Main Bearing Journal
C11 and C13 Engines
Piston Cooling Jet
C11 and C13 Engines
Cylinder Liner
C11 and C13 Engines
Cylinder Liner
C11 and C13 Engines
Cylinder Block
C11 and C13 Engines
Main Bearing Journal
C11 and C13 Engines
Piston Cooling Jet
C11 and C13 Engines
Cylinder Liner
C11 and C13 Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Main Bearings - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C11 and C13 Engines for Caterpillar Built Machines
Troubleshooting
Crankcase Pressure Is High
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C11 and C13 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 972H :

PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
PISTON & ROD GP
452-9086 PISTON & ROD GP
PISTON & ROD GP
261-1506 PISTON & ROD GP
PISTON & ROD GP
238-2723 PISTON & ROD GP
PISTON & ROD GP
238-2723 PISTON & ROD GP
PAN GP-OIL
234-7847 PAN GP-OIL
PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
PULLEY GP-ALTERNATOR
123-0789 PULLEY GP-ALTERNATOR
PULLEY GP-CRANKSHAFT
230-7168 PULLEY GP-CRANKSHAFT
ROCKER ARM GP
240-8461 ROCKER ARM GP
ROCKER ARM GP
240-8463 ROCKER ARM GP
ROCKER ARM GP
241-0835 ROCKER ARM GP
ROCKER ARM GP
241-0845 ROCKER ARM GP
ROCKER ARM GP
260-0251 ROCKER ARM GP

Truck sale:

Caterpillar 972H
 
Caterpillar 972H
- Wheel Loaders
FINNING CANADA
Caterpillar 972H P, Wheel Loaders, Construction
130,000 
Caterpillar 972H P, Wheel Loaders, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 972H, Wheel Loaders, Construction
385,945 
Caterpillar 972H, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
Caterpillar 972H, Wheel Loaders, Construction
393,296 
Caterpillar 972H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Caterpillar 972H, Wheel Loaders, Construction
319,441 
Caterpillar 972H, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.