HYDRAULIC SYSTEM
CYLINDER GPFILTER GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP37440910
361-2508: CYLINDER GP-COUPLER
361-2508 CYLINDER GP-COUPLER
S/N A7D1-UP
50.8-MM (2-IN) BORE X 69.9-MM (2.8-IN) STROKE
PART OF 222-4996 FRAME GP-QUICK COUPLER
FIELD REPLACEMENT FOR @@@@@237-0946@@@@@
S/N A7D1-UP
50.8-MM (2-IN) BORE X 69.9-MM (2.8-IN) STROKE
PART OF 222-4996 FRAME GP-QUICK COUPLER
FIELD REPLACEMENT FOR @@@@@237-0946@@@@@
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 237-0947 J | [1] | VALVE GP-CHECK (PILOT OPERATED) | |
2. | 9S-8002 | [4] | PLUG (7/16-20-THD) | |
3. | 216-9059 | [1] | PLUG AS | |
216-8994 | [1] | SEAL-O-RING | ||
[1] | PLUG | |||
AVAILABLE REPAIR KIT(S): | ||||
183-2091 | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
(INCLUDES O-RING SEALS, BACKUP RING, PISTON RING SEAL, U-CUP SEAL & ROD WIPER) | ||||
213-8433 J | [1] | KIT-SEAL (CHECK VALVE) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J |
#SEBP37440911
452-2509: CYLINDER GP-COUPLER
452-2509 CYLINDER GP-COUPLER
S/N A7D1-UP
63.5-MM (2.5-IN) BORE X 95.3-MM (3.75-IN) STROKE
PART OF 310-9390 COUPLER GP-QUICK
FIELD REPLACEMENT FOR @@@@@361-2507@@@@@
S/N A7D1-UP
63.5-MM (2.5-IN) BORE X 95.3-MM (3.75-IN) STROKE
PART OF 310-9390 COUPLER GP-QUICK
FIELD REPLACEMENT FOR @@@@@361-2507@@@@@
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 216-9059 | [1] | PLUG AS | |
216-8994 | [1] | SEAL-O-RING | ||
[1] | PLUG | |||
2. | 237-0947 J | [1] | VALVE GP-CHECK (PILOT OPERATED)(QUICK COUPLER) | |
3. | 9S-8002 | [8] | PLUG (7/16-20-THD) | |
AVAILABLE REPAIR KIT(S): | ||||
456-0584 | [1] | KIT-SEAL (COUPLER CYLINDER) | ||
(KIT INCLUDES O-RINGS, BACK-UP RINGS, BP SEAL, POLYPAK & DUST SEAL) | ||||
213-8433 J | [1] | KIT-SEAL (CHECK VALVE) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J |
#SEBP37440912
203-2208: CYLINDER GP-FORK
203-2208 CYLINDER GP-FORK
S/N A7D1-UP
127-MM (5-IN) BORE X 473-MM (18.6-IN) STROKE
PART OF 253-7509, 255-7334, 255-8916, 255-8938, 255-8974, 255-8979, 257-4307, 257-4331, 257-4332 FORK GP-LOG & LUMBER
S/N A7D1-UP
127-MM (5-IN) BORE X 473-MM (18.6-IN) STROKE
PART OF 253-7509, 255-7334, 255-8916, 255-8938, 255-8974, 255-8979, 257-4307, 257-4331, 257-4332 FORK GP-LOG & LUMBER
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 189-2482 | [1] | ROD AS-PISTON | |
2. | 348-7726 | [1] | TUBE AS | |
3. | 348-7727 | [1] | PISTON AS | |
4. | 348-7728 | [1] | PISTON AS | |
5. | 348-8035 | [1] | HEAD | |
6. | 7K-9639 | [1] | BUSHING | |
7. | 189-2490 | [2] | ORIFICE | |
8. | 187-9453 | [6] | VALVE-CHECK | |
9. | 108-6054 | [1] | LOCKNUT | |
10. | 113-0628 | [1] | SETSCREW | |
11. | 5L-4758 | [6] | SEAL-O-RING | |
12. | 166-7430 | [2] | RING-PISTON | |
13. | 7J-6285 | [1] | SEAL-O-RING | |
AVAILABLE REPAIR KIT(S): | ||||
241-7578 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J IN GRAPHIC |
#SEBP37440913
242-4274: CYLINDER GP-LIFT
242-4274 CYLINDER GP-LIFT -RH
S/N A7D1-UP
159-MM (6.3-IN) BORE X 833-MM (32.8-IN) STROKE
PART OF 236-9032 CYLINDER & SEAL GP-LIFT
S/N A7D1-UP
159-MM (6.3-IN) BORE X 833-MM (32.8-IN) STROKE
PART OF 236-9032 CYLINDER & SEAL GP-LIFT
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 162-7209 J | [1] | RING-BACKUP | |
2. | 244-6628 | [1] | HEAD | |
3. | 373-5829 | [1] | ROD AS | |
4. | 244-7030 | [1] | CYLINDER AS | |
4A. | 9T-8676 | [1] | BUSHING | |
5. | 248-3317 | [1] | PISTON | |
6. | 132-4907 J | [1] | RING-WEAR | |
7. | 311-9316 J | [1] | SEAL AS-BUFFER | |
8. | 311-9317 J | [1] | SEAL-U-CUP | |
9. | 311-9318 J | [1] | SEAL-WIPER | |
10. | 2J-7686 | [1] | LOCKNUT (2.5X12-THD) | |
11. | 6V-5657 J | [1] | SEAL-O-RING | |
12. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
13. | 8T-0667 M | [8] | BOLT (M24X3X100-MM) | |
14. | 8T-1788 J | [1] | SEAL AS | |
15. | 9J-5550 J | [1] | RING-WEAR | |
AVAILABLE REPAIR KIT(S): | ||||
295-9888 | KIT-SEAL (LIFT CYLINDER) | |||
J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP37440914
242-4275: CYLINDER GP-LIFT
242-4275 CYLINDER GP-LIFT -LH
S/N A7D1-UP
159-MM (6.3-IN) BORE X 833-MM (32.8-IN) STROKE
PART OF 236-9031 CYLINDER & SEAL GP-LIFT
S/N A7D1-UP
159-MM (6.3-IN) BORE X 833-MM (32.8-IN) STROKE
PART OF 236-9031 CYLINDER & SEAL GP-LIFT
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 162-7209 J | [1] | RING-BACKUP | |
2. | 244-6628 | [1] | HEAD | |
3. | 373-5829 | [1] | ROD AS | |
4. | 244-7030 | [1] | CYLINDER AS | |
4A. | 9T-8676 | [1] | BUSHING | |
5. | 248-3317 | [1] | PISTON | |
6. | 132-4907 J | [1] | RING-WEAR | |
7. | 311-9316 J | [1] | SEAL AS-BUFFER | |
8. | 311-9317 J | [1] | SEAL-U-CUP | |
9. | 311-9318 J | [1] | SEAL-WIPER | |
10. | 2J-7686 | [1] | LOCKNUT (2.5X12-THD) | |
11. | 6V-5657 J | [1] | SEAL-O-RING | |
12. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
13. | 8T-0667 M | [8] | BOLT (M24X3X100-MM) | |
14. | 8T-1788 J | [1] | SEAL AS | |
15. | 9J-5550 J | [1] | RING-WEAR | |
AVAILABLE REPAIR KIT(S): | ||||
295-9888 J | KIT-SEAL (LIFT CYLINDER) | |||
J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP37440915
244-8777: CYLINDER GP-TILT
244-8777 CYLINDER GP-TILT -LOGGING
S/N A7D1-UP
196.85-MM BORE X 537-MM STROKE
PART OF 236-9104 CYLINDER & SEAL GP-TILT
FIELD REPLACEMENT ORDER @@@@@356-2220@@@@@
S/N A7D1-UP
196.85-MM BORE X 537-MM STROKE
PART OF 236-9104 CYLINDER & SEAL GP-TILT
FIELD REPLACEMENT ORDER @@@@@356-2220@@@@@
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 244-7778 | [1] | HEAD | |
2. | 244-8772 | [1] | PISTON | |
3. | 244-8776 | [1] | CYLINDER AS | |
9J-7100 | [1] | BUSHING | ||
4. | 247-4834 | [1] | ROD AS | |
9J-7099 | [1] | BUSHING | ||
5. | 346-5192 J | [1] | SEAL AS-BUFFER | |
6. | 346-5200 J | [1] | SEAL-U-CUP | |
7. | 346-5196 J | [1] | SEAL-WIPER | |
8. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
9. | 5K-1787 J | [1] | SEAL-O-RING | |
10. | 5P-8250 | [11] | WASHER (28X49X5-MM THK) | |
11. | 8J-0548 J | [1] | RING-BACKUP | |
12. | 8T-1792 J | [1] | SEAL AS | |
13. | 8T-3330 J | [1] | RING-WEAR | |
14. | 9J-5037 J | [1] | RING-WEAR | |
15. | 9X-8896 | [11] | BOLT (1-8X4-IN) | |
AVAILABLE REPAIR KIT(S): | ||||
365-2880 J | [1] | KIT-HYD CYLINDER SEAL | ||
J | KIT MARKED J SERVICES PART(S) MARKED J |
#SEBP37440916
245-7486: CYLINDER GP-TILT
245-7486 CYLINDER GP-TILT -HIGH LIFT MACHINES
S/N A7D1-UP
196.85-MM BORE X 550-MM STROKE
PART OF 236-9101, 236-9102, 326-2757, 342-4992, 342-4993 CONTROL AR-HIGH LIFT
FIELD REPLACEMENT ORDER @@@@@358-5190@@@@@
S/N A7D1-UP
196.85-MM BORE X 550-MM STROKE
PART OF 236-9101, 236-9102, 326-2757, 342-4992, 342-4993 CONTROL AR-HIGH LIFT
FIELD REPLACEMENT ORDER @@@@@358-5190@@@@@
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 244-7778 | [1] | HEAD | |
2. | 244-8772 | [1] | PISTON | |
3. | 245-7685 | [1] | CYLINDER AS | |
9J-7100 | [1] | BUSHING | ||
4. | 247-4915 | [1] | ROD AS | |
9J-7099 | [1] | BUSHING | ||
5. | 167-2214 | [1] | SEAL AS-BUFFER | |
6. | 167-2328 | [1] | SEAL-U-CUP | |
7. | 227-1149 | [1] | SEAL-WIPER | |
8. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
9. | 5K-1787 | [1] | SEAL-O-RING | |
10. | 5P-8250 | [11] | WASHER (28X49X5-MM THK) | |
11. | 8J-0548 | [1] | RING-BACKUP | |
12. | 8T-1792 | [1] | SEAL AS | |
13. | 8T-3330 | [1] | RING-WEAR | |
14. | 9J-5037 | [1] | RING-WEAR | |
15. | 9X-8896 | [11] | BOLT (1-8X4-IN) |
#SEBP37440917
356-2220: CYLINDER GP-TILT
356-2220 CYLINDER GP-TILT
S/N A7D1-UP
196.85-MM BORE X 540-MM STROKE
PART OF 236-9104 CYLINDER & SEAL GP-TILT
FIELD REPLACEMENT FOR @@@@@244-8777@@@@@
S/N A7D1-UP
196.85-MM BORE X 540-MM STROKE
PART OF 236-9104 CYLINDER & SEAL GP-TILT
FIELD REPLACEMENT FOR @@@@@244-8777@@@@@
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 357-1150 | [1] | CYLINDER AS | |
1A. | 9J-7100 | BUSHING | ||
2. | 373-6678 | [1] | ROD AS | |
2A. | 9J-7099 | [1] | BUSHING | |
3. | 244-7778 | [1] | HEAD | |
4. | 244-8772 | [1] | PISTON | |
5. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
6. | 8T-1792 J | [1] | SEAL AS | |
7. | 5P-8250 | [11] | WASHER (28X49X5-MM THK) | |
8. | 9X-8896 | [11] | BOLT (1-8X4-IN) | |
9. | 346-5196 J | [1] | SEAL-WIPER | |
10. | 346-5200 J | [1] | SEAL-U-CUP | |
11. | 346-5192 J | [1] | SEAL AS-BUFFER | |
12. | 8T-3330 J | [1] | RING-WEAR | |
13. | 5K-1787 J | [1] | SEAL-O-RING | |
14. | 8J-0548 J | [1] | RING-BACKUP | |
15. | 9J-5037 J | [1] | RING-WEAR | |
AVAILABLE REPAIR KIT(S): | ||||
365-2880 J | [1] | KIT-HYD CYLINDER SEAL | ||
(INCLUDES INCLUDES SEALS, RINGS, & SEAL ASSEMBLIES) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J |
#SEBP37440918
358-5190: CYLINDER GP-TILT
358-5190 CYLINDER GP-TILT -HIGH LIFT MACHINES
S/N A7D1-UP
196.85-MM BORE X 553-MM STROKE
PART OF 236-9101, 236-9102, 326-2757, 342-4992, 342-4993 CONTROL AR-HIGH LIFT
FIELD REPLACEMENT FOR @@@@@245-7486@@@@@
S/N A7D1-UP
196.85-MM BORE X 553-MM STROKE
PART OF 236-9101, 236-9102, 326-2757, 342-4992, 342-4993 CONTROL AR-HIGH LIFT
FIELD REPLACEMENT FOR @@@@@245-7486@@@@@
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 244-7778 | [1] | HEAD | |
2. | 244-8772 | [1] | PISTON | |
3. | 373-7151 | [1] | ROD AS | |
4. | 346-5192 | [1] | SEAL AS-BUFFER | |
5. | 346-5196 | [1] | SEAL-WIPER | |
6. | 361-6787 | [1] | CYLINDER AS | |
7. | 346-5200 | [1] | SEAL-U-CUP | |
8. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
9. | 5K-1787 | [1] | SEAL-O-RING | |
10. | 5P-8250 | [11] | WASHER (28X49X5-MM THK) | |
11. | 8J-0548 | [1] | RING-BACKUP | |
12. | 8T-1792 | [1] | SEAL AS | |
13. | 8T-3330 | [1] | RING-WEAR | |
14. | 9J-5037 | [1] | RING-WEAR | |
15. | 9X-8896 | [11] | BOLT (1-8X4-IN) |
#SEBP37440919
244-1031: FILTER GP-OIL
244-1031 FILTER GP-OIL -HYDRAULIC
S/N A7D1-822
PART OF 236-8983 LINES GP-HYDRAULIC OIL COOLER
S/N A7D1-822
PART OF 236-8983 LINES GP-HYDRAULIC OIL COOLER
Parts for your 972H WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | |
2. | 8C-6712 | [1] | ELBOW | |
3. | 253-2673 | [1] | SWITCH GP-PRESSURE (HYDRAULIC FILTER BYPASS) | |
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
9X-1813 E | SLEEVE (14-CM) | |||
4. | 225-4118 | [1] | FILTER-OIL (ULTRA HIGH EFFICIENCY) | |
5. | 3J-1907 | [2] | SEAL-O-RING | |
6. | 3J-7354 | [1] | SEAL-O-RING | |
7. | 5F-9144 | [1] | SEAL-O-RING | |
8. | 8C-3446 | [1] | VALVE-SAMPLING (FUEL) | |
E | ORDER BY THE CENTIMETER |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Rework Procedure of the Lines Routing for the Autolube on the Front Tilt Lever for Certain 966 and 972 Medium Wheel Loaders{5104, 6116, 6119, 6129, 7540}
Rework Procedure of the Lines Routing for the Autolube on the Front Tilt Lever for Certain 966 and 972 Medium Wheel Loaders{5104, 6116, 6119, 6129, 7540}
Rework Procedure of the Lines Routing for the Autolube on the Front Tilt Lever for Certain 966 and 972 Medium Wheel Loaders{5104, 6116, 6119, 6129, 7540}
Technical Information Bulletin
950H, 962H, 966H, 972H Wheel Loaders and IT62H Integrated Toolcarrier Lift Cylinder Rod Ends May Create a Void{5102}
950H, 962H, 966H, 972H Wheel Loaders and IT62H Integrated Toolcarrier Lift Cylinder Rod Ends May Create a Void{5102}
950H, 962H, 966H, 972H Wheel Loaders and IT62H Integrated Toolcarrier Lift Cylinder Rod Ends May Create a Void{5102}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Lift and Tilt Cylinder Drift - Check
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Debris Baffle for the Lift Cylinders Is Available for 966 and 972 Machines {5102, 7164}
2013/05/17
2013/05/17