AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

321-5283 VALVE GP-STEERING NEUTRALIZER S/N A7D823-UP PART OF 236-8986 LINES GP-STEERING 972H WHEEL LOADER


STEERING SYSTEM
LINES GP
IMPLEMENTS
CONTROL GP

WHEEL LOADER 972H WHEEL LOADER A7D
 972H Wheel Loader A7D00001-UP (MACHINE) POWERED BY C13 Engine SEBP3744 972H A7D   (2005)

STEERING SYSTEM

LINES GP
VALVE GP-STEERING NEUTRALIZER
146-7571 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING NEUTRALIZER
296-5662 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING NEUTRALIZER
321-5283 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING NEUTRALIZER
8J-1553 VALVE GP-STEERING NEUTRALIZER
 

#SEBP37441120
 

321-5283: VALVE GP-STEERING NEUTRALIZER

321-5283 VALVE GP-STEERING NEUTRALIZER
S/N A7D823-UP
PART OF 236-8986 LINES GP-STEERING
i03624586 SEBP3744
3215283 VALVE GP-STEERING NEUTRALIZER Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-8096 [1] SPRING-VALVE  
2. 1U-3142 [1] BOOT  
3. 7B-8194 [1] SPRING  
4. 9J-0477 [1] PLUG  
5. 9S-6155 [1] PLUG AS  
  1J-9671 [1] SEAL-O-RING  
  4H-8380 [1] PIN-SPRING  
  3K-8460 [1] PLUG (1/2-20-THD)  
6. 447-5614 [1] SEAL-LIP TYPE  
7. 4B-9782 [1] BALL  
8. 4K-1388 [1] SEAL-O-RING  
 

#SEBP37441121
 

8J-1553: VALVE GP-STEERING NEUTRALIZER

8J-1553 VALVE GP-STEERING NEUTRALIZER -COMMAND CONTROL STEERING
S/N A7D1-822
PART OF 236-8986 LINES GP-STEERING
i00091737 SEBP3744
8J1553 VALVE GP-STEERING NEUTRALIZER Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-3142 [1] BOOT  
2. 1J-9671 [2] SEAL-O-RING  
3. 9S-6155 [1] PLUG AS  
4. 1A-8096 [1] SPRING-VALVE  
5. 3J-1907 [2] SEAL-O-RING  
6. 9S-4191 [1] PLUG (9/16-18-THD)  
7. 4B-9782 [1] BALL  
8. 9J-0477 [1] PLUG  
9. 4K-1388 [1] SEAL-O-RING  
10. 3K-8460 [1] PLUG (1/2-20-THD)  
11. 7B-8194 [1] SPRING  
12. 8J-1552 [1] VALVE GP-STEERING NEUTRALIZER  
12A. 3J-4407 [1] SEAL-LIP TYPE  
 

#SEBP37441122
 

185-3651: ARM & BEARING AS-LIFT

185-3651 ARM & BEARING AS-LIFT
S/N A7D1-UP
PART OF 193-3131 ARM AS-LIFT, 283-2588 ARM GP-LIFT, 185-3650 CONTROL GP-BUCKET
i01577741 SEBP3744
1853651 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-8674 [2] BUSHING  
2. 9C-7863 M [1] BLOCK (M12X1.75-MM)  
2A. 110-2023 M [2] STUD-WELD (M10X1.5X25-MM)  
2B. 216-8208 [3] BOSS (M10X1.5X45-MM)  
3. 4V-8675 [2] BUSHING  
4. 4V-8673 [2] BUSHING  
  M   METRIC PART
 

#SEBP37441123
 

237-4782: ARM & BEARING AS-LIFT

237-4782 ARM & BEARING AS-LIFT
S/N A7D1-UP
PART OF 283-2590 ARM GP-LIFT
i02518842 SEBP3744
2374782 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-2798 [1] PLATE  
2. 237-4781 [1] ARM AS-LIFT  
2A. [2] PLATE AS  
2B. 9C-7863 M [1] BLOCK (M12X1.75-MM)  
2C. 110-2023 M [2] STUD-WELD (M10X1.5X25-MM)  
3. 4V-8673 [2] BUSHING  
4. 4V-8674 [2] BUSHING  
5. 4V-8675 [2] BUSHING  
  M   METRIC PART
 

#SEBP37441124
 

242-0445: ARM & BEARING AS-LIFT

242-0445 ARM & BEARING AS-LIFT -HIGH LIFT MACHINES
S/N A7D1-UP
PART OF 242-0446, 283-2589 ARM GP-LIFT, 236-9101 CONTROL AR-HIGH LIFT
i02010056 SEBP3744
2420445 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-2798 [1] PLATE  
3. 4V-8673 [2] BUSHING  
4. 4V-8674 [2] BUSHING  
5. 4V-8675 [2] BUSHING  
 

#SEBP37441125
 

287-5814: ARM & BEARING AS-LIFT

287-5814 ARM & BEARING AS-LIFT -HIGH LIFT MACHINES
S/N A7D1-UP
PART OF 283-2589 ARM GP-LIFT, 236-9101 CONTROL AR-HIGH LIFT
i02544986 SEBP3744
2875814 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 344-5249 [1] ARM AS-LIFT  
  216-8208 [3] BOSS (M10X1.5X45-MM)  
2. 4V-8673 [2] BUSHING  
3. 4V-8674 [2] BUSHING  
4. 4V-8675 [2] BUSHING  
 

#SEBP37441126
 

287-6077: ARM & BEARING AS-LIFT

287-6077 ARM & BEARING AS-LIFT
S/N A7D1-901
PART OF 283-2588 ARM GP-LIFT, 185-3650 CONTROL GP-BUCKET
FIELD REPLACEMENT ORDER @@@@@465-3383@@@@@
i02545162 SEBP3744
2876077 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] ARM AS-LIFT  
  9C-7863 M [1] BLOCK (M12X1.75-MM)  
  110-2023 M [2] STUD-WELD (M10X1.5X25-MM)  
2. 4V-8673 [2] BUSHING  
3. 4V-8674 [2] BUSHING  
4. 4V-8675 [2] BUSHING  
  M   METRIC PART
 

#SEBP37441127
 

287-6077: ARM & BEARING AS-LIFT

287-6077 ARM & BEARING AS-LIFT
S/N A7D902-UP
PART OF 283-2588 ARM GP-LIFT, 185-3650 CONTROL GP-BUCKET
FIELD REPLACEMENT ORDER @@@@@465-3383@@@@@
i03811289 SEBP3744
2876077 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. C [1] ARM AS-LIFT  
  9C-7863 M [1] BLOCK (M12X1.75-MM)  
  110-2023 M [2] STUD-WELD (M10X1.5X25-MM)  
  216-8208 [3] BOSS (M10X1.5X45-MM)  
2. 4V-8673 [2] BUSHING  
3. 4V-8674 [2] BUSHING  
4. 4V-8675 [2] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37441128
 

287-6115: ARM & BEARING AS-LIFT

287-6115 ARM & BEARING AS-LIFT
S/N A7D1-UP
PART OF 283-2590 ARM GP-LIFT, 256-5717 CONTROL AR-BUCKET
i02544995 SEBP3744
2876115 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 367-0096 [1] ARM AS-LIFT  
1A. 9C-7863 M [1] BLOCK (M12X1.75-MM)  
1B. 110-2023 M [2] STUD-WELD (M10X1.5X25-MM)  
1C. [2] PLATE AS  
1D. 216-8208 [3] BOSS (M10X1.5X45-MM)  
2. 4V-8673 [2] BUSHING  
3. 4V-8674 [2] BUSHING  
4. 4V-8675 [2] BUSHING  
  M   METRIC PART
 

#SEBP37441129
 

369-6004: ARM & BEARING AS-LIFT

369-6004 ARM & BEARING AS-LIFT
S/N A7D1-UP
PART OF 465-3383 ARM GP-LIFT
FIELD REPLACEMENT ORDER @@@@@465-3383@@@@@
i05438636 SEBP3744
3696004 ARM & BEARING AS-LIFT Parts scheme
  For full view, you need register

Parts for your 972H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 369-6005 Y [1] ARM AS-LIFT  
2. 4V-8673 [2] BUSHING (REAR)  
3. 4V-8674 [2] BUSHING (CENTER)  
4. 4V-8675 [2] BUSHING (FRONT)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Steering Pilot Oil Screen (Command Control Steering) - Clean/Replace - If Equipped
966H and 972H Wheel Loaders
Special Instruction
Procedure to Install the Boot for the HMU for Certain Integrated Toolcarriers and Wheel Loaders{4304, 4312}
Procedure to Install the Boot for the HMU for Certain Integrated Toolcarriers and Wheel Loaders{4304, 4312}
Installation Procedure for Back Pressure Valve on Medium Wheel Loaders{4304, 5057, 5067, 5067}
Installation Procedure for Back Pressure Valve on Medium Wheel Loaders{4304, 5057, 5067, 5067}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Corrective Actions to Address Frame Contact on Medium Wheel Loaders with HMU Steering{4304, 4307, 5057}
Corrective Actions to Address Frame Contact on Medium Wheel Loaders with HMU Steering{4304, 4307, 5057}
Specifications
Secondary Steering Valve
966H Wheel Loader and 972H
Wheel Loader Steering System
Check Valve (Steering Quad) (Command Control Steering)
966H Wheel Loader and 972H
Wheel Loader Steering System
Steering Neutralizer Valve (Command Control Steering)
966H Wheel Loader and 972H
Wheel Loader Steering System
Steering Neutralizer Valve (HMU Steering)
966H Wheel Loader and 972H
Wheel Loader Steering System
Systems Operation
Secondary Steering Valve
966H Wheel Loader and 972H
Wheel Loader Steering System
Check Valve (Steering Quad) (Command Control Steering)
966H Wheel Loader and 972H
Wheel Loader Steering System
Steering Neutralizer Valve
966H Wheel Loader and 972H
Wheel Loader Steering System
Testing and Adjusting
Steering Neutralizer Valve - Check and Adjust
966H Wheel Loader and 972H
Wheel Loader Steering System
Steering Pilot System Pressure - Test - Command Control Steering
966H Wheel Loader and 972H
Wheel Loader Steering System
Disassembly and Assembly
Secondary Steering Valve - Disassemble
966H and 972H Wheel Loaders Machine Systems
Secondary Steering Valve - Assemble
966H and 972H Wheel Loaders Machine Systems
Secondary Steering Valve - Remove
966H and 972H Wheel Loaders Machine Systems
Secondary Steering Valve - Install
966H and 972H Wheel Loaders Machine Systems
Secondary Steering Valve - Install
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (Command Control Steering) - Remove
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (Command Control Steering) - Install
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (Command Control Steering) - Disassemble
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (Command Control Steering) - Assemble
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (HMU Steering) - Remove
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (HMU Steering) - Install
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (HMU Steering) - Disassemble
966H and 972H Wheel Loaders Machine Systems
Steering Neutralizer Valve (HMU Steering) - Assemble
966H and 972H Wheel Loaders Machine Systems
Service Magazine
The Steering Neutralizer Valve has been improved {4330}
2006/11/20
New Components for the Steering Cylinder Lines Are Now Used {4304}
2008/12/01
New Routing of the Steering Neutralizer Valve Return Lines {4304}
2008/12/08
New Steering Neutralizer Valves Are Now Used on Medium Wheel Loaders {4330}
2009/12/04
New Metering Pumps Are Available for Medium Wheel Loaders That Are Equipped with HMU Steering {4304, 4312}
2010/08/13
An Improved Nipple Assembly is Now Being Used {0618, 4304, 5057, 5057, 7554}
2010/08/04
New Procedures Are Now Available to Address Frame Contact on Medium Wheel Loaders with HMU Steering {4304, 4307, 5057}
2013/07/25
An Improved Lip Seal for the Neutralizer Valves Now Used on Certain Large Wheel Loaders, Medium Wheel Loaders, Wheel Dozers, Landfill Compactors, and Soil Compactors {4330}
2015/07/17

Caterpillar Parts SIS Catalog 972H :

VALVE GP-STEERING NEUTRALIZER
296-5662 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING NEUTRALIZER
146-7571 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING
142-3996 VALVE GP-STEERING
VALVE GP-STEERING
133-1728 VALVE GP-STEERING
8J-6875 VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-SECONDARY STEERING
141-2597 VALVE GP-SECONDARY STEERING
VALVE GP-SECONDARY STEERING
141-2597 VALVE GP-SECONDARY STEERING
VALVE GP-STEERING NEUTRALIZER
8J-1553 VALVE GP-STEERING NEUTRALIZER
ARM & BEARING AS-LIFT
185-3651 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
237-4782 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
242-0445 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
287-5814 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
287-6077 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
287-6077 ARM & BEARING AS-LIFT
ARM & BEARING AS-LIFT
287-6115 ARM & BEARING AS-LIFT

Truck sale:

Caterpillar 972H
 
Caterpillar 972H
- Wheel Loaders
FINNING CANADA
Caterpillar 972H P, Wheel Loaders, Construction
130,000 
Caterpillar 972H P, Wheel Loaders, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 972H, Wheel Loaders, Construction
385,945 
Caterpillar 972H, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
Caterpillar 972H, Wheel Loaders, Construction
393,296 
Caterpillar 972H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Caterpillar 972H, Wheel Loaders, Construction
319,441 
Caterpillar 972H, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.