165-4465 LINES GP-TURBOCHARGER OIL S/N 4ZF21721-UP PART OF 216-4800 ENGINE AR FOR USE WITH LOW MOUNT, REAR TURBOCHARGER EXHAUST TK721



AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
COOLING SYSTEM
COOLER GP
COOLING GP
FAN GP

TRACK FELLER BUNCHER TK721 TRACK FELLER BUNCHER 102
 TK721 Track Feller Buncher 10200001-UP (MACHINE) POWERED BY C-9 Engine SEBP3751 TK721 102   (2001)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
165-4465 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
165-4465 LINES GP-TURBOCHARGER OIL
TURBOCHARGER GP
191-5094 TURBOCHARGER GP
TURBOCHARGER GP
191-5518 TURBOCHARGER GP
 

#SEBP37510070
 

165-4465: LINES GP-TURBOCHARGER OIL

165-4465 LINES GP-TURBOCHARGER OIL
S/N 4ZF21721-UP
PART OF 216-4800 ENGINE AR
FOR USE WITH LOW MOUNT, REAR TURBOCHARGER EXHAUST
i02397008 SEBP3751
1654465 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 183-3399 C [1] CONNECTOR AS  
  6V-8636 [1] CONNECTOR  
1A. 214-7568 [1] SEAL-O-RING  
1B. 228-7089 [1] SEAL-O-RING  
2. 329-5511 [1] ELBOW AS  
  6V-8723 [1] ELBOW  
2A. 228-7089 [1] SEAL-O-RING  
2B. 238-5080 [1] SEAL-O-RING  
3. 197-8419 C [1] GASKET (TURBOCHARGER)  
4. 246-6036 C [1] HOSE  
5. 249-9230 [1] HOSE AS  
6. 259-2993 C [1] TUBE AS-DRAIN  
7. 259-2994 C [1] TUBE AS-DRAIN  
8. 284-3502 C [2] CLAMP-BAND  
9. 5P-7530 C [1] SEAL-O-RING  
10. 6V-3940 CM [2] BOLT (M8X1.25X25-MM)  
11. 6V-5218 CM [2] BOLT (M8X1.25X35-MM)  
12. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37510071
 

195-8098: PUMP GP-ENGINE OIL

195-8098 PUMP GP-ENGINE OIL
S/N 4ZF4479-25857
PART OF 216-4803 ENGINE AR-CORE
i01440203 SEBP3751
1958098 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 211-0546 [1] PUMP GP-ENGINE OIL  
  210-5522 [1] PUMP AS-ENGINE OIL  
1A. 221-0144 [1] GEAR AS (60-TEETH)  
2. 6V-1819 M [2] BOLT (M10X1.5X100-MM)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37510072
 

195-8098: PUMP GP-ENGINE OIL

195-8098 PUMP GP-ENGINE OIL
S/N 4ZF4479-UP
PART OF 216-4803 ENGINE AR-CORE
Type 1
i03238790 SEBP3751
1958098 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 331-8906 C [1] PUMP GP-ENGINE OIL  
1A. 221-0144 [1] GEAR AS (60-TEETH)  
  331-8905 [1] PUMP AS-ENGINE OIL  
2. 6V-1819 M [2] BOLT (M10X1.5X100-MM)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37510073
 

195-8098: PUMP GP-ENGINE OIL

195-8098 PUMP GP-ENGINE OIL
S/N 4ZF4479-UP
PART OF 216-4803 ENGINE AR-CORE
Type 2
i05670729 SEBP3751
1958098 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 396-6022 C [1] PUMP GP-GEROTOR  
1A. 221-0144 [1] GEAR AS (60-TEETH)  
2. 6V-1819 M [2] BOLT (M10X1.5X100-MM)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37510074
 

188-3826: COOLER GP-ENGINE OIL

188-3826 COOLER GP-ENGINE OIL
S/N 4ZF4479-UP
PART OF 216-4803 ENGINE AR-CORE
i01616002 SEBP3751
1883826 COOLER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 209-7293 [1] GASKET  
2. 293-9367 C [1] CORE AS-OIL COOLER (ENGINE)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37510075
 

216-9860: COOLING AR

216-9860 COOLING AR
S/N 1021-UP
PART OF 213-2395, 262-0999 COMMON AR
i01836689 SEBP3751
2169860 COOLING AR Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 216-9862 Y [1] RADIATOR & MOUNTING GP  
2. 216-9863 Y [1] LINES GP-COOLING (RADIATOR, AFTERCOOLER, HYD OIL COOLER)  
3. 216-9865 Y [1] GUARD GP-RADIATOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37510076
 

216-9864: FAN AR-REVERSIBLE

216-9864 FAN AR-REVERSIBLE
S/N 1021-UP
CANNOT BE USED WITH @@@@@216-9871@@@@@
AN ATTACHMENT
i01844157 SEBP3751
2169864 FAN AR-REVERSIBLE Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 9R-2216 [1] BOSS  
2. 225-4131 [1] FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)  
3. 190-4155 [1] BELT-SERPENTINE (REVERSIBLE FAN)  
4. 198-0212 [2] GUARD AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
5. 222-9124 [1] SWITCH AS-ROCKER (AUTOMATIC REVERSING FAN)  
6. 223-7634 Y [1] FAN GP-REVERSIBLE  
7. 223-7636 [1] TUBE AS  
8. 223-7637 [1] TUBE AS  
9. 233-2328 I [2] HOSE AS  
10. 148-8338 [2] CONNECTOR AS  
11. 148-8369 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
12. 148-8385 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
13. 164-5570 [2] UNION AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-8730 [1] UNION (FACE SEAL)  
14. 5K-2298 [1] CLIP  
15. 5K-5338 [3] CLIP (LOOP)  
16. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37510077
 

216-9864: FAN AR-REVERSIBLE

216-9864 FAN AR-REVERSIBLE
S/N 1021-1294
CANNOT BE USED WITH @@@@@216-9871@@@@@
AN ATTACHMENT
i02291663 SEBP3751
2169864 FAN AR-REVERSIBLE Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 9R-2216 [1] BOSS  
2. 225-4131 [1] FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)  
3. 190-4155 [1] BELT-SERPENTINE (REVERSIBLE FAN)  
4. 198-0212 [2] GUARD AS  
    (EACH INCLUDES)
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
5. 236-4623 C [1] SWITCH AS-ROCKER (24-VOLT)(AUTOMATIC REVERSING FAN)  
6. 223-7634 Y [1] FAN GP-REVERSIBLE  
7. 223-7636 [1] TUBE AS  
8. 223-7637 [1] TUBE AS  
9. 233-2328 I [2] HOSE AS  
10. 148-8338 [2] CONNECTOR AS  
11. 148-8369 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
12. 148-8385 [1] ELBOW AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-9000 [1] ELBOW  
13. 164-5570 [2] UNION AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-8730 [1] UNION (FACE SEAL)  
14. 5K-2298 [1] CLIP  
15. 5K-5338 [3] CLIP (LOOP)  
16. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37510078
 

216-9864: FAN AR-REVERSIBLE

216-9864 FAN AR-REVERSIBLE
S/N 1021295-UP
CANNOT BE USED WITH @@@@@216-9871@@@@@
AN ATTACHMENT
i02433364 SEBP3751
2169864 FAN AR-REVERSIBLE Parts scheme 2169864 FAN AR-REVERSIBLE Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 190-4155 [1] BELT-SERPENTINE (REVERSIBLE FAN)  
2. 198-0212 [2] GUARD AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
3. 223-7634 Y [1] FAN GP-REVERSIBLE  
4. 225-4131 [1] FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)  
5. 233-2328 I [2] HOSE AS  
6. 236-4623 [1] SWITCH AS-ROCKER (24-VOLT)(AUTOMATIC REVERSING FAN)  
7. 279-0484 C [1] TUBE AS  
8. 279-0485 C [1] TUBE AS  
9. 148-8338 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-0075 [1] CONNECTOR  
10. 148-8369 C [2] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
11. 164-5570 [2] UNION AS  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-8730 [1] UNION (FACE SEAL)  
12. 5K-2298 [1] CLIP  
13. 5K-5338 [3] CLIP (LOOP)  
14. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
16. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
17. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
18. 9R-2216 [1] BOSS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37510079
 

223-7634: FAN GP-REVERSIBLE

223-7634 FAN GP-REVERSIBLE
S/N 1021-UP
PART OF 216-9864 FAN AR-REVERSIBLE
AN ATTACHMENT
i01974023 SEBP3751
2237634 FAN GP-REVERSIBLE Parts scheme
  For full view, you need register

Parts for your TK721 TRACK FELLER BUNCHER:

Pos. Part No Qty Parts name Comments
1. 236-0819 [4] KIT-FAN BLADE  
    (EACH INCLUDES BLADES, LOCKNUTS, COUNTERWEIGHTS, RETAINERS & BOLTS)
2. 228-3380 [1] KIT-FAN HUB  
    (INCLUDES BOLTS, LOCKNUTS, WASHERS, BEARINGS, SHIM PACK, SPACERS, END PLATE, PIVOT BLOCKS & SHAFT)
3. 228-3381 [1] KIT-BEARING  
    (INCLUDES LOCKNUTS, LOCKWASHERS, BEARINGS, SHIM PACK & SPACER)
4. 228-3382 [1] KIT-FAN (PIVOT BLOCK, SHIFTER)  
    (INCLUDES BOLTS, WASHERS, LOCKNUT, END PLATE, SPACERS, BEARING, PIVOT BLOCK, SHIM & SHAFT)
5. 236-0827 [1] KIT-SEAL (FAN)  
    (INCLUDES SEALS, NUT & RETAINER)
6. 236-0828 [1] CARRIER-BEARING  
7. 1T-0765 [16] BOLT (3/8-16X1-IN)  
8. 236-0829 [2] LINK  
9. 272-0107 [1] PULLEY-FAN  
10. 236-0831 [1] SHAFT  
11. 118-9573 M [4] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
  M   METRIC PART
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
C-9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
Testing and Adjusting
Turbocharger - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbocharger - Install
C9
Engine For Caterpillar Built Machines
Turbocharger - Remove
C9
Engine For Caterpillar Built Machines
Turbocharger - Remove and Install - Engine in Chassis
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Turbocharger - Remove
C9 Engines for Caterpillar Built Machines
Turbocharger - Install
C9 Engines for Caterpillar Built Machines
Turbocharger - Disassemble
C9
Engine For Caterpillar Built Machines
Turbocharger - Assemble
C9
Engine For Caterpillar Built Machines
Service Magazine
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Three-Piece Drain Tubes for the Turbocharger are Now Used {1052, 1307}
2005/08/15
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog TK721 :

LINES GP-TURBOCHARGER OIL
165-4465 LINES GP-TURBOCHARGER OIL
LINES GP-ENGINE OIL
202-6603 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
202-6603 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
202-6603 LINES GP-ENGINE OIL
GAUGE GP-OIL LEVEL (DIPSTICK)
219-9960 GAUGE GP-OIL LEVEL (DIPSTICK)
FUMES DISPOSAL GP
226-3559 FUMES DISPOSAL GP
FILTER GP-ENGINE OIL
220-1998 FILTER GP-ENGINE OIL
FILLER GP-ENGINE OIL
226-3560 FILLER GP-ENGINE OIL
PUMP GP-ENGINE OIL
195-8098 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
195-8098 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
195-8098 PUMP GP-ENGINE OIL
COOLER GP-ENGINE OIL
188-3826 COOLER GP-ENGINE OIL
COOLING AR
216-9860 COOLING AR
FAN AR-REVERSIBLE
216-9864 FAN AR-REVERSIBLE
FAN AR-REVERSIBLE
216-9864 FAN AR-REVERSIBLE
FAN AR-REVERSIBLE
216-9864 FAN AR-REVERSIBLE

Truck sale:

CATERPILLAR TK721 2004
 
CATERPILLAR TK721 2004
- FORESTRY - HARVESTER
MILTON CAT
100 Quarry Drive - MILFORD - Massachus