AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

282-9611 CYLINDER GP-TILT -REAR, FOR CAB LEVELING S/N 103463-UP PART OF 224-9037 CYLINDER & LINES GP-TILT TK722


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

TRACK FELLER BUNCHER TK722 TRACK FELLER BUNCHER 103
 TK722 Track Feller Buncher 10300001-UP (MACHINE) POWERED BY C-9 Engine SEBP3752 TK722 103   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT
254-5457 CYLINDER GP-TILT
CYLINDER GP-TILT
274-7480 CYLINDER GP-TILT
CYLINDER GP-TILT
282-9611 CYLINDER GP-TILT
 

#SEBP37520310
 

282-9611: CYLINDER GP-TILT

282-9611 CYLINDER GP-TILT -REAR, FOR CAB LEVELING
S/N 103463-UP
PART OF 224-9037 CYLINDER & LINES GP-TILT
i02423188 SEBP3752
2829611 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 5J-4997 J [1] SEAL AS  
  5J-4995 [1] RING-EXPANDER  
3. 8C-9101 J [1] RING-WEAR  
4. 8M-4228 J [1] RING-WEAR  
5. 155-3537 [2] BEARING  
6. 167-2209 J [1] SEAL AS-BUFFER  
7. 225-3285 J [1] SEAL-WIPER  
8. 229-0329 [1] TUBE AS  
9. 229-0332 [1] HEAD  
10. 229-0333 [1] PISTON  
11. 230-4560 J [1] SEAL-O-RING  
12. 230-4562 J [1] RING-BACKUP  
13. 282-9612 [1] ROD AS  
14. 067-3161 [4] RING-RETAINING  
15. 167-2320 J [1] SEAL-U-CUP  
16. 3H-8430 [2] SETSCREW (3/8-16X0.75-IN)  
17. 4D-6419 [8] WASHER-HARD (24X40X5-MM THK)  
18. 6V-6707 J [1] SEAL-O-RING  
19. 8D-3886 [1] RING-RETAINING  
20. 8L-4638 [8] BOLT (7/8-9X2.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  229-0334 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP37520311
 

217-9689: DRIVE AR-SWING

217-9689 DRIVE AR-SWING
S/N 1031-UP
PART OF 218-1919 HYDRAULIC AR-TILT
i01844169 SEBP3752
2179689 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-2273 [1] VALVE AS-SHUTOFF (SWING DRIVE OIL DRAIN)  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
2. 2B-7561 [2] CORK  
3. 5D-1026 [2] CLAMP-BAND  
4. 096-4755 [1] PIN  
5. 220-8623 Y [1] DRIVE GP-SWING  
6. 221-5390 I [1] HOSE AS  
7. 221-5391 I [1] HOSE AS  
8. 5P-0767 E HOSE (76-CM)  
9. 1P-3702 [4] SEAL-RECTANGULAR  
10. 168-9860 [1] PLUG  
11. 112-3929 M [16] BOLT (M24X3X100-MM)  
12. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
13. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
14. 8T-9403 [8] FLANGE-HALF  
15. 8T-4182 M [16] BOLT (M10X1.5X45-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520312
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N 1031-UP
PART OF 199-4490 DRIVE GP-SWING
Type 1
i01469111 SEBP3752
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 231-6864 [1] BREATHER AS (SWING DRIVE)  
2A. 114-8234 [1] BREATHER (SWING DRIVE)  
2B. 093-5150 [1] COUPLING-PIPE  
2C. 231-6969 [1] NIPPLE-PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 114-1399 [1] PIPE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 095-0891 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 7Y-0339 [8] BEARING AS-ROLLER  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
38. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37520313
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N 1031-UP
PART OF 199-4490 DRIVE GP-SWING
Type 2
i02834295 SEBP3752
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
2A. 4H-6112 [1] BREATHER (SWING DRIVE)  
2B. 227-6215 [1] BOSS (1/4-18-THD)  
2C. 267-6785 [1] PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 114-1399 [1] PIPE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 095-0891 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 191-2513 [8] BEARING AS-ROLLER  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP37520314
 

199-4490: DRIVE GP-SWING

199-4490 DRIVE GP-SWING
S/N 1031-UP
FIELD REPLACEMENT FOR @@@@@220-8620@@@@@, @@@@@191-2693@@@@@
i01988670 SEBP3752
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  191-2693 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520315
 

201-7808: DRIVE GP-SWING

201-7808 DRIVE GP-SWING
S/N 103197-UP
PART OF 220-8623 DRIVE GP-SWING
i01496667 SEBP3752
2017808 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
3. 165-2273 [1] VALVE AS-SHUTOFF (HYDRAULIC OIL)  
  3K-0360 [1] SEAL-O-RING  
  6V-7238 [1] VALVE-SHUTOFF  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 093-1730 [2] RING-RETAINING  
7. 093-1731 [1] RING-RETAINING  
8. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
9. 094-1528 [8] WASHER (53X84X1-MM THK)  
10. 096-2653 [1] RING-RETAINING  
11. 114-1383 [4] SHAFT-PLANETARY  
12. 114-1401 [1] COVER-HOUSING  
13. 169-5617 [1] GEAR-SUN (18-TEETH)  
14. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
15. 171-9280 [1] GEAR-RING (72-TEETH)  
16. 171-9283 [1] GEAR-SUN (24-TEETH)  
17. 171-9375 [1] SEAL-O-RING  
18. 191-2579 [1] CARRIER-PLANETARY  
19. 191-2694 [1] SHAFT-PINION  
20. 191-2695 [1] HOUSING  
21. 191-2696 [1] CAGE  
22. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
23. 7Y-1115 [1] PIPE-GAUGE  
24. 093-2357 [1] GAUGE-OIL LEVEL (DIPSTICK) (HYDRAULIC OIL)  
25. 095-0891 [7] PIN-SPRING  
26. 135-9044 [2] SEAL-LIP TYPE  
27. 136-2904 [1] BEARING  
28. 136-2940 [1] BEARING  
29. 1U-8846 B SEALANT-GASKET  
30. 7Y-0252 [3] BEARING AS-ROLLER  
31. 191-2513 [8] BEARING AS-ROLLER  
32. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
33. 8J-8879 [1] SEAL-O-RING  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37520316
 

220-8620: DRIVE GP-SWING

220-8620 DRIVE GP-SWING
S/N 1031-196
PART OF 220-8623 DRIVE GP-SWING
FIELD REPLACEMENT ORDER @@@@@199-4490@@@@@
i01846280 SEBP3752
2208620 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 4I-7527 [1] BREATHER AS (SWING DRIVE)  
  114-8234 [1] BREATHER (SWING DRIVE)  
  093-5150 [1] COUPLING-PIPE  
  159-7665 [1] NIPPLE-PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1115 [1] PIPE-GAUGE  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 096-2653 [1] RING-RETAINING  
12. 114-1383 [4] SHAFT-PLANETARY  
13. 114-1401 [1] COVER-HOUSING  
14. 169-5617 [1] GEAR-SUN (18-TEETH)  
15. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
16. 171-9280 [1] GEAR-RING (72-TEETH)  
17. 171-9283 [1] GEAR-SUN (24-TEETH)  
18. 171-9375 [1] SEAL-O-RING  
19. 191-2579 [1] CARRIER-PLANETARY  
20. 191-2694 [1] SHAFT-PINION  
21. 191-2696 [1] CAGE  
22. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
23. 093-2357 [1] GAUGE-OIL LEVEL (DIPSTICK) (HYDRAULIC OIL)  
24. 095-0891 [7] PIN-SPRING  
25. 135-9044 [2] SEAL-LIP TYPE  
26. 136-2904 [1] BEARING  
27. 136-2940 [1] BEARING  
28. 191-2695 [1] HOUSING  
29. 3K-0360 [1] SEAL-O-RING  
30. 7Y-0252 [3] BEARING AS-ROLLER  
31. 7Y-0339 [8] BEARING AS-ROLLER  
32. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
33. 8J-8879 [1] SEAL-O-RING  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
38. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37520317
 

220-8623: DRIVE GP-SWING

220-8623 DRIVE GP-SWING
S/N 1031-196
PART OF 217-9689 DRIVE AR-SWING
i01846250 SEBP3752
2208623 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-1513 Y [1] MOTOR & MTG GP-SWING  
2. 220-8620 Y [1] DRIVE GP-SWING  
3. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
4. 8T-6404 [1] SEAL-O-RING  
5. 8T-4944 M [4] BOLT-SOCKET HEAD (M16X2X40-MM)  
6. 6V-5204 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520318
 

220-8623: DRIVE GP-SWING

220-8623 DRIVE GP-SWING
S/N 103197-UP
PART OF 217-9689 DRIVE AR-SWING
i02148101 SEBP3752
2208623 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-1513 Y [1] MOTOR & MTG GP-SWING  
2. 201-7808 Y [1] DRIVE GP-SWING  
3. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
4. 8T-6404 [1] SEAL-O-RING  
5. 8T-4944 M [4] BOLT-SOCKET HEAD (M16X2X40-MM)  
6. 6V-5204 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520319
 

188-2084: FILTER & VALVE GP-PILOT

188-2084 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N 1031-UP
PART OF 217-9694 LINES GP-PILOT
i01647394 SEBP3752
1882084 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-8236 [1] RING  
2. 126-1813 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)  
3. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
3A. 095-1584 [1] SEAL-O-RING  
3B. 095-1590 [1] SEAL-O-RING  
3C. 095-1596 [1] SEAL-O-RING  
4. Z [1] BASE  
  Z   NOT SERVICED SEPARATELY
 

Information:

Operation and Maintenance Manual
Tilt Cylinder Bearings - Lubricate
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CYLINDER ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T AND 1290T TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CYLINDER ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T AND 1290T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
TK711 Track Feller Buncher, TK721
Track Feller Buncher, TK722
Track Feller Buncher and TK732
Track Feller Buncher Machine Systems
Stick Cylinder
TK711 Track Feller Buncher, TK721
Track Feller Buncher, TK722
Track Feller Buncher and TK732
Track Feller Buncher Machine Systems
Tilt Cylinder (Saw) - Felling Head
TK711 Track Feller Buncher, TK721
Track Feller Buncher, TK722
Track Feller Buncher and TK732
Track Feller Buncher Machine Systems
Tilt Cylinder (Side for Cab Leveling)
TK711 Track Feller Buncher, TK721
Track Feller Buncher, TK722
Track Feller Buncher and TK732
Track Feller Buncher Machine Systems
Tilt Cylinder (Rear for Cab Leveling)
TK711 Track Feller Buncher, TK721
Track Feller Buncher, TK722
Track Feller Buncher and TK732
Track Feller Buncher Machine Systems
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK AND BOOM CYLINDER ASSEMBLIES WHICH MAY DEVELOP A CRACK AND LEAK ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Testing and Adjusting
Boom Cylinder Drift - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Stick Cylinder Drift - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Tilt Cylinder Drift - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Cycle Times - Test and Adjust
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder (Saw) - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems
Stick Cylinder - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems
Boom Cylinder - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems
Tilt Cylinder (Side for Cab Leveling) - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
The Service Life of the Boom Cylinder Lines has been Increased by Rotating the Cap of the Boom Cylinder by 90&deg; {5057, 5456}
2004/02/16
A New Spool Is Available for the Tilt Control Valve That Improves the Operation of the Tilt Cylinder (Saw) {5104}
2004/10/18
Correction to Specifications , "Tilt Cylinder (Side for Cab Leveling)" and Specifications , "Tilt Cylinder (Rear for Cab Leveling)" {5104}
2005/02/14
New Cab Tilt Cylinder Is Available {5104}
2006/06/12
Grinding the Mount for the Hood Tilt Cylinder May Improve Service Life {5104, 7251}
2006/08/14
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog TK722 :

CYLINDER GP-TILT
274-7480 CYLINDER GP-TILT
CYLINDER GP-TILT
254-5457 CYLINDER GP-TILT
CYLINDER GP-TILT
222-9150 CYLINDER GP-TILT
CYLINDER GP-TILT
222-9149 CYLINDER GP-TILT
CYLINDER GP-TILT
215-9052 CYLINDER GP-TILT
CYLINDER GP-STICK
226-4970 CYLINDER GP-STICK
CYLINDER GP-STICK
215-9092 CYLINDER GP-STICK
CYLINDER GP-HYDRAULIC
215-9097 CYLINDER GP-HYDRAULIC
DRIVE AR-SWING
217-9689 DRIVE AR-SWING
DRIVE GP-SWING
191-2693 DRIVE GP-SWING
DRIVE GP-SWING
191-2693 DRIVE GP-SWING
199-4490 DRIVE GP-SWING
DRIVE GP-SWING
201-7808 DRIVE GP-SWING
DRIVE GP-SWING
220-8620 DRIVE GP-SWING
DRIVE GP-SWING
220-8623 DRIVE GP-SWING
DRIVE GP-SWING
220-8623 DRIVE GP-SWING

Truck sale:

CATERPILLAR TK722 2004
$90,000 USD 
CATERPILLAR TK722 2004
- FORESTRY - FELLER BUNCHERS - TRACK
HOLT OF CALIFORNIA
- Pleasant Grove - California - 95668
CATERPILLAR TK722 2003
 
CATERPILLAR TK722 2003
- FORESTRY - FELLER BUNCHERS - TRACK
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
2005 CAT TK722
USD $70,861 
2005 CAT TK722

Major Equipment Sales
Prince George, British Columbia, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.