AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

12H Motor Grader 12500001-UP (MACHINE) POWERED BY C-9 Engine HYDRAULIC SYSTEM Caterpillar SIS



MOTOR GRADER 12H MOTOR GRADER 125
 12H Motor Grader 12500001-UP (MACHINE) POWERED BY C-9 Engine SEBP3754 12H 125   (2003)

Parts group 12H:

  For full view, you need register
HYDRAULIC SYSTEM
ACCUMULATOR GP
ACCUMULATOR & MTG GP-HYDRAULIC
162-7451 ACCUMULATOR & MTG GP-HYDRAULIC
162-7451 ACCUMULATOR & MTG GP-HYDRAULIC
S/N 1251-UP
PART OF 166-3337 ACCUMULATOR AR-BLADE CUSHION
AN ATTACHMENT
166-3337 ACCUMULATOR AR-BLADE CUSHION
166-3337 ACCUMULATOR AR-BLADE CUSHION
S/N 1251-UP
AN ATTACHMENT
ACCUMULATOR GP-HYDRAULIC
162-7450 ACCUMULATOR GP-HYDRAULIC
162-7450 ACCUMULATOR GP-HYDRAULIC
S/N 1251-UP
PART OF 162-7451 ACCUMULATOR & MTG GP-HYDRAULIC
AN ATTACHMENT
ACCUMULATOR GP-STEERING
248-6251 ACCUMULATOR GP-STEERING
248-6251 ACCUMULATOR GP-STEERING
S/N 1251-UP
PART OF 160-9179 LINES GP-STEERING
LINES GP-ACCUMULATOR
166-3336 LINES GP-ACCUMULATOR
166-3336 LINES GP-ACCUMULATOR
S/N 1251-UP
PART OF 166-3337 ACCUMULATOR AR-BLADE CUSHION
AN ATTACHMENT
CYLINDER GP
CYLINDER & MTG GP-ARTICULATION
193-1474 CYLINDER & MTG GP-ARTICULATION
193-1474 CYLINDER & MTG GP-ARTICULATION
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER & MTG GP-BLADE LIFT
8X-1947 CYLINDER & MTG GP-BLADE LIFT
8X-1947 CYLINDER & MTG GP-BLADE LIFT
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER & MTG GP-BLADE TIP
8X-1943 CYLINDER & MTG GP-BLADE TIP
8X-1943 CYLINDER & MTG GP-BLADE TIP
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER & MTG GP-CENTERSHIFT
8X-1944 CYLINDER & MTG GP-CENTERSHIFT
8X-1944 CYLINDER & MTG GP-CENTERSHIFT
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER & MTG GP-SIDESHIFT
112-7463 CYLINDER & MTG GP-SIDESHIFT
112-7463 CYLINDER & MTG GP-SIDESHIFT
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER & MTG GP-STEERING
8W-2290 CYLINDER & MTG GP-STEERING
8W-2290 CYLINDER & MTG GP-STEERING
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER & MTG GP-WHEEL LEAN
8W-2737 CYLINDER & MTG GP-WHEEL LEAN
8W-2737 CYLINDER & MTG GP-WHEEL LEAN
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
CYLINDER GP-ARTICULATION
9T-8784 CYLINDER GP-ARTICULATION
9T-8784 CYLINDER GP-ARTICULATION
S/N 1251-UP
76.2 MM (3.0 IN) BORE X 284.3 MM (11.2 IN) STROKE. (CHGS 00-03)
PART OF 193-1474 CYLINDER & MTG GP-ARTICULATION
CYLINDER GP-BLADE TIP
131-7191 CYLINDER GP-BLADE TIP
131-7191 CYLINDER GP-BLADE TIP
S/N 1251-UP
69.85 MM BORE X 307.00 MM STROKE
PART OF 8X-1943 CYLINDER & MTG GP-BLADE TIP
CYLINDER GP-BLADE TIP
9T-2461 CYLINDER GP-BLADE TIP
9T-2461 CYLINDER GP-BLADE TIP
S/N 1251-UP
70.00 MM (2.75 IN) BORE X 307.00 MM (12.00 IN) STROKE. (CHGS 03-06)
PART OF 3Q-8401 CYLINDER GP-TILT
AN ATTACHMENT
CYLINDER GP-CENTERSHIFT
6E-1343 CYLINDER GP-CENTERSHIFT
6E-1343 CYLINDER GP-CENTERSHIFT
S/N 1251-UP
76.2 MM BORE X 630.0 MM STROKE
PART OF 8X-1944 CYLINDER & MTG GP-CENTERSHIFT
CYLINDER GP-HYDRAULIC
152-6485 CYLINDER GP-HYDRAULIC
152-6485 CYLINDER GP-HYDRAULIC
S/N 1251-UP
(101.6MM BORE X 472MM STROKE)
PART OF 3Q-9350 BULLDOZER AR-LIFT, 3Q-9351 BULLDOZER AR-LIFT & TILT
AN ATTACHMENT
CYLINDER GP-LIFT
132-4929 CYLINDER GP-LIFT
132-4929 CYLINDER GP-LIFT
S/N 1251-UP
76.2 MM BORE X 1245.0 MM STROKE
PART OF 8X-1947 CYLINDER & MTG GP-BLADE LIFT
CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
S/N 1251-UP
101.6 MM BORE X 482.6 MM STROKE
PART OF 175-2559 RIPPER AR
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
S/N 1251-UP
76.2 MM BORE X 1175.0 MM STROKE
PART OF 112-7463 CYLINDER & MTG GP-SIDESHIFT
CYLINDER GP-STEERING
130-9041 CYLINDER GP-STEERING
130-9041 CYLINDER GP-STEERING -LH
S/N 1251-UP
57.15 MM BORE X 267 MM STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
CYLINDER GP-STEERING
130-9042 CYLINDER GP-STEERING
130-9042 CYLINDER GP-STEERING -RH
S/N 1251-UP
57.15 MM BORE X 267 MM STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
3Q-8401 CYLINDER GP-TILT
3Q-8401 CYLINDER GP-TILT
S/N 1251-UP
PART OF 3Q-9351 BULLDOZER AR-LIFT & TILT
AN ATTACHMENT
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
S/N 1251-UP
88.9 MM BORE X 149.0 MM STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
DRIVE GP
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
LINES GP
LINES GP-ACCUMULATOR
166-3336 LINES GP-ACCUMULATOR
166-3336 LINES GP-ACCUMULATOR
S/N 1251-UP
PART OF 166-3337 ACCUMULATOR AR-BLADE CUSHION
AN ATTACHMENT
LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
159-4729 LINES GP-HYDRAULIC
159-4729 LINES GP-HYDRAULIC -CENTERSHIFT LOCK
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
LINES GP-HYDRAULIC
207-9152 LINES GP-HYDRAULIC
207-9152 LINES GP-HYDRAULIC -LH
S/N 1251-UP
4 CIRCUITS
PART OF 2C-9812 GENERAL AR
LINES GP-HYDRAULIC
207-9153 LINES GP-HYDRAULIC
207-9153 LINES GP-HYDRAULIC -RH
S/N 1251-UP
4 CIRCUITS
PART OF 2C-9812 GENERAL AR
LINES GP-HYDRAULIC FAN
LINES GP-HYDRAULIC FAN
175-6978 LINES GP-HYDRAULIC FAN
175-6978 LINES GP-HYDRAULIC FAN
S/N 1251-72
PART OF 2C-9812 GENERAL AR
LINES GP-HYDRAULIC FAN
175-6981 LINES GP-HYDRAULIC FAN
175-6981 LINES GP-HYDRAULIC FAN
S/N 1251-72
PART OF 185-1542 COOLING AR
LINES GP-HYDRAULIC FAN
242-3289 LINES GP-HYDRAULIC FAN
242-3289 LINES GP-HYDRAULIC FAN
S/N 12573-UP
PART OF 242-6181 COOLING AR
LINES GP-HYDRAULIC FAN
243-0417 LINES GP-HYDRAULIC FAN
243-0417 LINES GP-HYDRAULIC FAN
S/N 12573-UP
PART OF 2C-9812 GENERAL AR
LINES GP-PUMP
LINES GP-PUMP
160-9178 LINES GP-PUMP
160-9178 LINES GP-PUMP
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
Type 1
LINES GP-PUMP
160-9178 LINES GP-PUMP
160-9178 LINES GP-PUMP
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
Type 2
LINES GP-PUMP
160-9178 LINES GP-PUMP
160-9178 LINES GP-PUMP
S/N 1251-72
PART OF 2C-9812 GENERAL AR
LINES GP-PUMP
243-0424 LINES GP-PUMP
243-0424 LINES GP-PUMP
S/N 12573-UP
PART OF 2C-9812 GENERAL AR
LINES GP-RIPPER
LINES GP-RIPPER
166-3308 LINES GP-RIPPER
166-3308 LINES GP-RIPPER
S/N 1251-UP
PART OF 166-3305 CONTROL AR-HYDRAULIC
Type 1
LINES GP-RIPPER
166-3308 LINES GP-RIPPER
166-3308 LINES GP-RIPPER
S/N 1251-UP
PART OF 166-3305 CONTROL AR-HYDRAULIC
Type 2
LINES GP-RIPPER
174-2339 LINES GP-RIPPER
174-2339 LINES GP-RIPPER
S/N 1251-UP
PART OF 175-2559 RIPPER AR
LINES GP-STEERING
LINES GP-STEERING
160-9179 LINES GP-STEERING
160-9179 LINES GP-STEERING
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
LOCK GP
LOCK GP-CENTERSHIFT
164-8462 LOCK GP-CENTERSHIFT
164-8462 LOCK GP-CENTERSHIFT
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
MANIFOLD GP
MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
S/N 1251-UP
PART OF 166-3336 LINES GP-ACCUMULATOR
AN ATTACHMENT
MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL -FAN SPEED
S/N 1251-72
PART OF 175-6978 LINES GP-HYDRAULIC FAN
MOTOR GP
FAN & MOTOR GP
179-3261 FAN & MOTOR GP
179-3261 FAN & MOTOR GP
S/N 1251-UP
PART OF 185-1542, 242-6181 COOLING AR
MOTOR GP-GEAR
224-7040 MOTOR GP-GEAR
224-7040 MOTOR GP-GEAR
S/N 1251-UP
PART OF 179-3261 FAN & MOTOR GP
MOTOR GP-GEROTOR
105-3196 MOTOR GP-GEROTOR
105-3196 MOTOR GP-GEROTOR
S/N 1251-UP
PART OF 5T-0570 DRIVE GP-CIRCLE
PUMP GP
PUMP & MTG GP-PISTON
160-9180 PUMP & MTG GP-PISTON
160-9180 PUMP & MTG GP-PISTON
S/N 1251-72
PART OF 2C-9812 GENERAL AR
PUMP & MTG GP-PISTON
243-0429 PUMP & MTG GP-PISTON
243-0429 PUMP & MTG GP-PISTON
S/N 12573-UP
PART OF 2C-9812 GENERAL AR
PUMP GP-PISTON
169-4882 PUMP GP-PISTON
169-4882 PUMP GP-PISTON
S/N 1251-72
PART OF 160-9180 PUMP & MTG GP-PISTON
PUMP GP-PISTON
169-4883 PUMP GP-PISTON
169-4883 PUMP GP-PISTON
S/N 1251-72
PART OF 160-9180 PUMP & MTG GP-PISTON
PUMP GP-PISTON
235-4257 PUMP GP-PISTON
235-4257 PUMP GP-PISTON
S/N 12573-UP
PART OF 243-0429 PUMP & MTG GP-PISTON
PUMP GP-PISTON
243-5639 PUMP GP-PISTON
243-5639 PUMP GP-PISTON
S/N 12573-UP
PART OF 243-0429 PUMP & MTG GP-PISTON
ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
S/N 1251-UP
PART OF 169-4882, 243-5639 PUMP GP-PISTON
ROTATING GP-PUMP
189-4710 ROTATING GP-PUMP
189-4710 ROTATING GP-PUMP
S/N 12573-UP
PART OF 235-4257 PUMP GP-PISTON
ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP -HYDRAULIC FAN
S/N 1251-72
PART OF 169-4883 PUMP GP-PISTON
SWASHPLATE GP
169-3290 SWASHPLATE GP
169-3290 SWASHPLATE GP -VARIABLE
S/N 1251-UP
PART OF 169-4882, 243-5639 PUMP GP-PISTON
VALVE GP-PUMP CONTROL
104-3122 VALVE GP-PUMP CONTROL
104-3122 VALVE GP-PUMP CONTROL
S/N 1251-UP
PART OF 169-4882, 243-5639 PUMP GP-PISTON
VALVE GP-PUMP CONTROL
195-9639 VALVE GP-PUMP CONTROL
195-9639 VALVE GP-PUMP CONTROL -HYDRAULIC FAN
S/N 1251-72
PART OF 169-4883 PUMP GP-PISTON
PUMP GP-METERING
PUMP GP-METERING
102-1501 PUMP GP-METERING
102-1501 PUMP GP-METERING
S/N 1251-UP
PART OF 7I-4718 CONTROL GP-STEERING
SHAFT GP
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
173-1011 SWIVEL GP
S/N 1251-UP
PART OF 207-9152 LINES GP-HYDRAULIC
TANK GP
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
S/N 1251-UP
PART OF 207-2409 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4622 VALVE & LINKAGE GP
7I-4622 VALVE & LINKAGE GP -HYDRAULIC CONTROL
S/N 1251-UP
PART OF 166-3305 CONTROL AR-HYDRAULIC
VALVE & LINKAGE GP
8X-1949 VALVE & LINKAGE GP
8X-1949 VALVE & LINKAGE GP
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
VALVE GP-BANK
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
S/N 1251-UP
PART OF 7I-4622, 8X-1949 VALVE & LINKAGE GP
VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4
S/N 1251-UP
PART OF 8X-1949 VALVE & LINKAGE GP
VALVE GP-BANK 5
104-8645 VALVE GP-BANK 5
104-8645 VALVE GP-BANK 5
S/N 1251-UP
PART OF 7I-4622 VALVE & LINKAGE GP
VALVE GP-PURGE
VALVE GP-PURGE
131-8350 VALVE GP-PURGE
131-8350 VALVE GP-PURGE
S/N 1251-UP
PART OF 229-7155 VALVE GP-COMBINATION
VALVE GP-COMBINATION
VALVE GP-COMBINATION
229-7155 VALVE GP-COMBINATION
229-7155 VALVE GP-COMBINATION
S/N 1251-UP
PART OF 160-9178, 243-0424 LINES GP-PUMP
VALVE GP-COMBINATION
9T-5957 VALVE GP-COMBINATION
9T-5957 VALVE GP-COMBINATION
S/N 1251-UP
PART OF 160-9178 LINES GP-PUMP
VALVE GP-CONTROL
DETENT GP-CONTROL VALVE
108-4916 DETENT GP-CONTROL VALVE
108-4916 DETENT GP-CONTROL VALVE
S/N 1251-UP
PART OF 107-0547, 6E-3031, 6E-3037 VALVE GP-CONTROL
ALSO AN ATTACHMENT
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
S/N 1251-UP
PART OF 7I-4622, 8X-1949 VALVE & LINKAGE GP
VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4
S/N 1251-UP
PART OF 8X-1949 VALVE & LINKAGE GP
VALVE GP-BANK 5
104-8645 VALVE GP-BANK 5
104-8645 VALVE GP-BANK 5
S/N 1251-UP
PART OF 7I-4622 VALVE & LINKAGE GP
VALVE GP-CONTROL
107-0545 VALVE GP-CONTROL
107-0545 VALVE GP-CONTROL -RIPPER
S/N 1251-UP
PART OF 167-0287 CONTROL GP-BULLDOZER HYDRAULIC, 104-8645 VALVE GP-BANK 5
ALSO AN ATTACHMENT
VALVE GP-CONTROL
107-0547 VALVE GP-CONTROL
107-0547 VALVE GP-CONTROL
S/N 1251-UP
PART OF 3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC
AN ATTACHMENT
VALVE GP-CONTROL
6E-3028 VALVE GP-CONTROL
6E-3028 VALVE GP-CONTROL -ARTICULATION
S/N 1251-UP
PART OF 6E-3032 VALVE GP-BANK 4
VALVE GP-CONTROL
6E-3029 VALVE GP-CONTROL
6E-3029 VALVE GP-CONTROL -CENTERSHIFT
S/N 1251-UP
PART OF 6E-3032 VALVE GP-BANK 4
VALVE GP-CONTROL
6E-3030 VALVE GP-CONTROL
6E-3030 VALVE GP-CONTROL -WHEEL LEAN
S/N 1251-UP
PART OF 6E-3032 VALVE GP-BANK 4
VALVE GP-CONTROL
6E-3031 VALVE GP-CONTROL
6E-3031 VALVE GP-CONTROL -BLADE LIFT
S/N 1251-UP
PART OF 6E-3032 VALVE GP-BANK 4
VALVE GP-CONTROL
6E-3034 VALVE GP-CONTROL
6E-3034 VALVE GP-CONTROL -BLADE TIP
S/N 1251-UP
PART OF 6E-3038 VALVE GP-BANK 4, 104-8645 VALVE GP-BANK 5
VALVE GP-CONTROL
6E-3035 VALVE GP-CONTROL
6E-3035 VALVE GP-CONTROL -CIRCLE DRIVE
S/N 1251-UP
PART OF 6E-3038 VALVE GP-BANK 4, 104-8645 VALVE GP-BANK 5
VALVE GP-CONTROL
6E-3036 VALVE GP-CONTROL
6E-3036 VALVE GP-CONTROL -SIDESHIFT
S/N 1251-UP
PART OF 6E-3038 VALVE GP-BANK 4, 104-8645 VALVE GP-BANK 5
VALVE GP-CONTROL
6E-3037 VALVE GP-CONTROL
6E-3037 VALVE GP-CONTROL -BLADE LIFT
S/N 1251-UP
PART OF 6E-3038 VALVE GP-BANK 4, 104-8645 VALVE GP-BANK 5
VALVE GP-RELIEF
MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
S/N 1251-UP
PART OF 166-3336 LINES GP-ACCUMULATOR
AN ATTACHMENT
MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL -FAN SPEED
S/N 1251-72
PART OF 175-6978 LINES GP-HYDRAULIC FAN
VALVE GP-RELIEF
100-6021 VALVE GP-RELIEF
100-6021 VALVE GP-RELIEF
S/N 1251-UP
PART OF 229-7155, 9T-5957 VALVE GP-COMBINATION
101-4147 VALVE GP-RELIEF
101-4147 VALVE GP-RELIEF
S/N 1251-UP
PART OF 107-0545, 6E-3034, 6E-3036 VALVE GP-CONTROL
ALSO AN ATTACHMENT
VALVE GP-RELIEF
101-4148 VALVE GP-RELIEF
101-4148 VALVE GP-RELIEF
S/N 1251-UP
PART OF 101-4147 VALVE GP-RELIEF
ALSO AN ATTACHMENT
VALVE GP-RELIEF
106-7389 VALVE GP-RELIEF
106-7389 VALVE GP-RELIEF
S/N 1251-UP
PART OF 101-4147 VALVE GP-RELIEF
ALSO AN ATTACHMENT
VALVE GP-RELIEF
106-7390 VALVE GP-RELIEF
106-7390 VALVE GP-RELIEF
S/N 1251-UP
PART OF 6E-3033 VALVE GP-RELIEF
ALSO AN ATTACHMENT
VALVE GP-RELIEF
4T-4935 VALVE GP-RELIEF
4T-4935 VALVE GP-RELIEF
S/N 1251-UP
PART OF 229-7155, 9T-5957 VALVE GP-COMBINATION
6E-3033 VALVE GP-RELIEF
6E-3033 VALVE GP-RELIEF
S/N 1251-UP
PART OF 107-0547, 6E-3031, 6E-3037 VALVE GP-CONTROL
ALSO AN ATTACHMENT
VALVE GP-RELIEF
6E-4703 VALVE GP-RELIEF
6E-4703 VALVE GP-RELIEF
S/N 1251-UP
PART OF 229-7155, 9T-5957 VALVE GP-COMBINATION
VALVE GP-RELIEF
6E-4704 VALVE GP-RELIEF
6E-4704 VALVE GP-RELIEF
S/N 1251-UP
PART OF 6E-3033 VALVE GP-RELIEF
ALSO AN ATTACHMENT
VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
131-0753 VALVE GP-SHUTTLE
131-0753 VALVE GP-SHUTTLE
S/N 1251-UP
PART OF 160-9178 LINES GP-PUMP
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE -BALL RESOLVER
S/N 1251-UP
PART OF 229-7155, 9T-5957 VALVE GP-COMBINATION
VALVE GP-SOLENOID
MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
S/N 1251-UP
PART OF 166-3336 LINES GP-ACCUMULATOR
AN ATTACHMENT
MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL -FAN SPEED
S/N 1251-72
PART OF 175-6978 LINES GP-HYDRAULIC FAN
VALVE GP-SOLENOID
149-2610 VALVE GP-SOLENOID
149-2610 VALVE GP-SOLENOID
S/N 1251-UP
24 VOLT DC
PART OF 112-2240 MANIFOLD GP-CONTROL
AN ATTACHMENT
VALVE GP-SOLENOID
152-8346 VALVE GP-SOLENOID
152-8346 VALVE GP-SOLENOID
S/N 1251-UP
PART OF 164-8462 LOCK GP-CENTERSHIFT

Information:

(For parts list, see above)

Operation and Maintenance Manual
Steering Accumulator - Check - If Equipped
12H Motor Grader
Blade Cushion Accumulator - Check
12H Motor Grader
Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Accumulator (Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Accumulator (Blade Cushion)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Accumulator (Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Systems Operation
Blade Cushion
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Testing and Adjusting
Accumulator (Blade Cushion) - Test and Charge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Accumulator (Steering) - Test and Charge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Accumulator (Blade Cushion) - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Operation and Maintenance Manual
Centershift Cylinder Socket - Lubricate
12H Motor Grader
Centershift Cylinder Socket - Check/Adjust/Replace
12H Motor Grader
Centershift Lock Bar - Clean/Lubricate
12H Motor Grader
Disassembly and Assembly
Centershift Lock Bar and Bushings - Remove
12H, 140H and 160H Motor Graders Machine Systems
Centershift Lock Bar and Bushings - Install
12H, 140H and 160H Motor Graders Machine Systems
Specifications
Solenoid Valve (Centershift Lock)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Solenoid Valve (Centershift Lock) - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Service Magazine
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Centershift Cylinder Socket - Lubricate
12H Motor Grader
Centershift Cylinder Socket - Check/Adjust/Replace
12H Motor Grader
Blade Lift Cylinder Socket - Check/Adjust/Replace
12H Motor Grader
Blade Lift Cylinder Socket - Lubricate
12H Motor Grader
Wheel Lean Bearings - Lubricate
12H Motor Grader
Wheel Lean Cylinder Bearings - Lubricate
12H Motor Grader
Wheel Lean Bar Bearings - Lubricate
12H Motor Grader
Ripper Cylinder Bearings - Lubricate
12H Motor Grader
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Blade Lift Cylinder and Mounting
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Centershift Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Scarifier Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Sideshift Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder and Mounting
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Ripper Lift Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Centershift Cylinder and Mounting
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Blade Lift Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Blade Tip Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Steering Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Articulation Cylinder Mounting
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Articulation Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Cycle Time - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Hydraulic Cylinder Drift - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Steering System - Purge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Centershift Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Blade Lift Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Ripper Lift Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Blade Tip Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Wheel Lean Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Steering Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Articulation Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Sideshift Cylinder - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
A New Locknut Improves Retention of the Retaining Pin {5229}
2005/01/24
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21
Operation and Maintenance Manual
Circle Clearances - Check/Adjust
12H Motor Grader
Circle Drive Oil - Change
12H Motor Grader
Circle Drive Oil Level - Check
12H Motor Grader
Circle Drive Pinion Teeth - Lubricate
12H Motor Grader
Specifications
Circle Drive
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Motor Grader Circle Pinion Reuse {5207}
Motor Grader Circle Pinion Reuse {5207}
Reusability of Worm Gear Sets {5207, 7552}
Reusability of Worm Gear Sets {5207, 7552}
Testing and Adjusting
Disc Pack Preload for Circle Drive - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Circle Drive - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Circle Drive - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Circle Drive - Remove
12H, 140H and 160H Motor Graders Machine Systems
Circle Drive - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
A New Lubrication Group for the Circle Drive Pinion Is Available {5207, 7510, 7540}
2009/03/02
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209}
2004/08/16
The Disassembly and Assembly Manual for Worm Gear Bearing Preload Setting has been Updated on Certain Motor Graders {5207}
2015/01/16
Operation and Maintenance Manual
Oil Filter - Inspect
12H Motor Grader
Hydraulic System Oil Filter - Replace
12H Motor Grader
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Hydraulic Tank and Filter
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Hydraulic Tank and Filter - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Motor Graders {3004, 3067, 5068}
2010/12/08
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HYDRAULIC ENGINE COOLING FAN ON CERTAIN 12H MOTORGRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HYDRAULIC ENGINE COOLING FAN ON CERTAIN 12H MOTORGRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Operation and Maintenance Manual
Ripper Tip - Inspect/Replace
12H Motor Grader
Ripper Cylinder Bearings - Lubricate
12H Motor Grader
Special Instruction
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Service Magazine
Special Instruction, SEHS9875, "Adapting Older Rippers to Newer Motor Graders" Is Available {5057, 6324, 6325}
2003/03/17
Specifications
Check Valve (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Service Magazine
New Routing of a Hydraulic Line Improves Service Life {4304}
2005/04/18
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Operation and Maintenance Manual
Centershift Lock Bar - Clean/Lubricate
12H Motor Grader
Specifications
Centershift Lock
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Systems Operation
Centershift Lock
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Centershift Lock - Remove
12H, 140H and 160H Motor Graders Machine Systems
Centershift Lock - Install
12H, 140H and 160H Motor Graders Machine Systems
Centershift Lock - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Centershift Lock - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Centershift Lock Bar and Bushings - Remove
12H, 140H and 160H Motor Graders Machine Systems
Centershift Lock Bar and Bushings - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
The Pin in the Centershift Lock Group is Updated {5221}
2007/10/01
A New Centershift Lock Cylinder is Available for Improved Service Life on Certain Motor Graders {5221}
2008/05/19
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Specifications
Gerotor Motor (Circle Drive)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Gear Motor (Hydraulic Fan)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Fan Drive System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Fan and Gear Motor (Hydraulic Fan) - Remove
12H, 140H and 160H Motor Graders Machine Systems
Fan and Gear Motor (Hydraulic Fan) - Install
12H, 140H and 160H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Gear Motor (Hydraulic Fan) - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Gear Motor (Hydraulic Fan) - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Remove
12H, 140H and 160H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209}
2004/08/16
A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}
2012/07/27
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Metering Pump (Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Steering Control Group
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Electric Drive Pump (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Piston Pump (Hydraulic and Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Pump Control Valve (Hydraulic Fan)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic Fan)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Pump Control Valve (Hydraulic, Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Metering Pump (Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Secondary Steering System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Secondary Steering Hydraulic System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Secondary Steering Electrical System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Fan Drive System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic Fan)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Metering Pump (Steering)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump (Hydraulic and Steering)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Testing and Adjusting
Bearing End Play (Piston Pump) - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Pump Control Valve (Hydraulic, Steering) - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Steering Wheel Slip - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Piston Pump (Hydraulic and Steering) - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic and Steering) - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Remove
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic Fan) - Install
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic and Steering) - Remove
12H, 140H and 160H Motor Graders Machine Systems
Piston Pump (Hydraulic and Steering) - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
A New Two-Piece Seal Is Used in Various Metering Pumps (Steering) and in the New 257-8471 Seal Kit {4312}
2004/12/20
Changes to the Metering Pump Group Improve the Reliability of the Horn {4312}
2004/12/20
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
The Assembly Procedure for the Implement Pump Has Been Improved {5070}
2007/11/26
Disassembly and Assembly
Metering Pump (Steering) - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
The Serviceability of Metering Pumps Has Been Limited {4312}
2006/05/15
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Specifications
Pump Drive Shaft
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Pump Drive Shaft - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Systems Operation
Secondary Steering System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Pressure Switch (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Secondary Steering Control
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Secondary Steering Hydraulic System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Secondary Steering Electrical System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Reuse And Salvage Guidelines
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Specifications
Swivel
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Swivel - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Swivel - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Swivel - Remove
12H, 140H and 160H Motor Graders Machine Systems
Swivel - Install
12H, 140H and 160H Motor Graders Machine Systems
Operation and Maintenance Manual
Hydraulic System Oil Sample - Obtain
12H Motor Grader
Hydraulic System Oil Level - Check
12H Motor Grader
Hydraulic System Oil - Change
12H Motor Grader
Hydraulic System Oil Filter - Replace
12H Motor Grader
Technical Information Bulletin
Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}
Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}
Specifications
Hydraulic Tank and Filter
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank and Filter - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Service Magazine
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Valve and Linkage Group
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Check Valve (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Testing and Adjusting
Relief Valve (Secondary Steering) - Test
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Disassembly and Assembly
Air Control Valve (Parking Brake) - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Special Instruction
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Disassembly and Assembly
Bank Valve - Disassemble - Bank Valve with Hydraulic Detent
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Disassemble - Bank Valve with Mechanical Detent
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Disassemble - Bank Valve with out Detent
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Assemble - Bank Valve with Hydraulic Detent
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Assemble - Bank Valve with Mechanical Detent
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Assemble - Bank Valve with out Detent
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Remove
12H, 140H and 160H Motor Graders Machine Systems
Bank Valve - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
New Torque Procedure for Certain Motor Grader Bank Valve Groups {5051}
2008/08/18
A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}
2012/07/27
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Specifications
Combination Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Combination Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Systems Operation
Combination Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Testing and Adjusting
Steering System - Purge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Combination Valve - Disassemble
12H, 140H and 160H Motor Graders Machine Systems
Combination Valve - Assemble
12H, 140H and 160H Motor Graders Machine Systems
Combination Valve - Remove
12H, 140H and 160H Motor Graders Machine Systems
Combination Valve - Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
A Previously Used Combination Valve Reduces Noise in the Cab {5064}
2009/03/16
Special Instruction
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Adapting Older Rippers to Newer Motor Graders{5051, 5057, 5352, 6324, 6325}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051}
Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Check for Poor Internal Surface Finish in the Control Valves on Certain Motor Graders{5051, 7750}
Check for Poor Internal Surface Finish in the Control Valves on Certain Motor Graders{5051, 7750}
Specifications
Control Valve (Blade Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Scarifier)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Blade Tip)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Wheel Lean)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Scarifier)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Circle Drive)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Articulation)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Sideshift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Ripper)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Ripper)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Centershift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Blade Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Wing Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Wing Tilt)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Wing Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Snow Plow/Dozer Angle)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
Service Letter-Asia
Systems Operation
Control Valve (Blade Lift)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Control Valve (Implement)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 229-5010 CARTRIDGE VALVE FROM DEALER PART STOCK
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
The Check Valves on Certain Motor Graders Have Been Improved {5051}
2008/05/05
New Torque Procedure for Certain Motor Grader Bank Valve Groups {5051}
2008/08/18
A new Check Valve Group Updates the Control Valve Groups {5051}
2008/12/22
The Plug in the Control Valve Groups is Updated {5051}
2008/12/29
An Updated Control Valve Lever is Available {5051}
2009/01/05
An Improved Spring is Available for the Compensator Valve on Certain K and H Series Motor Graders {5051}
2010/09/30
A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}
2012/07/27
Improved Service Sections Have Been Developed for The Resolver Port and The Pressure Compensator on Certain H Series and K Series Motor Graders {5051}
2014/03/31
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Relief Valve (Implement)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Signal)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Blade Tip)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Ripper)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Sideshift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Blade Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Blade Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Scarifier)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Relief Valve (Ripper)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Scarifier)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Wing Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Wing Tilt)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Wing Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Snow Plow/Dozer Angle)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Scarifier)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Testing and Adjusting
Relief Valves (Implement) - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Relief Valve (Secondary Steering) - Test
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Relief Valve (Steering) - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Service Magazine
A New Line Relief Valve for the Scarifier Is Now Used {5117}
2005/07/25
Specifications
Shuttle Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Service Magazine
The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
2005/06/13
Technical Information Bulletin
Solenoid For The Centershift On Motor Graders{5479}
Solenoid For The Centershift On Motor Graders{5479}
Specifications
Solenoid Valve (Centershift Lock)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Solenoid Valve (Blade Cushion)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Solenoid Valve Mounting (Hydraulic Fan)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Solenoid Valve (Hydraulic Fan)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Disassembly and Assembly
Solenoid Valve (Blade Cushion) - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
12H, 140H and 160H Motor Graders Machine Systems
Service Magazine
New Coils for the Solenoid Valve Are Now Available {5479}
2008/10/06
A New Coil Assembly is Now Used {5479}
2009/02/09
Testing and Adjusting
Steering System - Purge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Truck sale:

Caterpillar 12H, Construction
115,000 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
116,500 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
87,000 
Caterpillar 12H, Construction
- motor graders
MADISA
Mexico
Caterpillar 12 H, Construction
106,008 
Caterpillar 12 H, Construction
- motor graders
TRACTAFRIC EQUIPMENT
Netherlands
Caterpillar 12H, Construction
90,000 
Caterpillar 12H, Construction
- motor graders
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.