222-9135 WIRING GP-ENGINE ELECTRONIC S/N 4ZF15103-UP PART OF 168-7967, 285-6123 ENGINE AR 12H MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 222-9135 WIRING GP-
1. 234-2432 WIRING GP-
2. 159-5856 WIRING GP-
3. 193-8255 WIRING GP-
4. 193-8603 WIRING GP-

LIGHTING GP

5. 184-1299 WIRING GP-

WIRING GP

6. 159-5845 WIRING GP-

POWER TRAIN

TRANSMISSION GP

7. 180-9146 CASE & PAR
8. 180-9146 CASE & PAR

CHAIN GP

9. 6G-1755 CHAIN GP-D
0. INFORMATION

MOTOR GRADER 12H MOTOR GRADER 125
12H Motor Grader 12500001-UP (MACHINE) POWERED BY C-9 Engine SEBP3754 12H 125 (2003)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

159-5839 WIRING GP-CONSOLE

222-9135 WIRING GP-ENGINE ELECTRONIC

234-2432 WIRING GP-ENGINE ELECTRONIC

159-5856 WIRING GP-FRONT

193-8255 WIRING GP-REAR

#SEBP37540190

222-9135: WIRING GP-ENGINE ELECTRONIC

WIRING GP-ENGINE ELECTRONIC

222-9135 WIRING GP-ENGINE ELECTRONIC
S/N 4ZF15103-UP
PART OF 168-7967, 285-6123 ENGINE AR

i02221043 SEBP3754

2229135 WIRING GP-ENGINE ELECTRONIC Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[23]	STRAP-CABLE
2.	4P-5918	[1]	CLIP
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	3S-2093	[5]	STRAP-CABLE
4.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
6.	226-0903	[1]	CABLE AS
7.	230-6279	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
8.	4P-7581	[4]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	6V-4369	[1]	CLIP
11.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
12.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
13.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
14.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
15.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
16.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
17.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
18.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37540191

234-2432: WIRING GP-ENGINE ELECTRONIC

WIRING GP-ENGINE ELECTRONIC

234-2432 WIRING GP-ENGINE ELECTRONIC
S/N 4ZF5910-UP
PART OF 168-7967 ENGINE AR

i01908461 SEBP3754

2342432 WIRING GP-ENGINE ELECTRONIC Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[24]	STRAP-CABLE
2.	4P-5918	[1]	CLIP
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
4.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)
5.	224-9222	[1]	BRACKET
6.	226-0903	[1]	CABLE AS
7.	230-6279	[1]	HARNESS AS-ENGINE (SENSORS)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
8.	3E-4353	[3]	WASHER-HARD (11X25X3-MM THK)
9.	4P-7581	[3]	CLIP (LADDER)
10.	4P-8134	[4]	CLIP (LADDER)
11.	6V-4248 M	[1]	BOLT (M10X1.5X25-MM)
12.	6V-4369	[1]	CLIP
13.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
14.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
15.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
19.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
20.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
21.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37540192

159-5856: WIRING GP-FRONT

WIRING GP-FRONT

159-5856 WIRING GP-FRONT
S/N 1251-UP
PART OF 2C-9812 GENERAL AR

i01859447 SEBP3754

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-2342	[1]	STRAP AS-GROUND
2.	3E-2026	[1]	SWITCH AS-PRESSURE (STOP LAMP)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	3E-3636	[1]	SWITCH AS-BALL
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	3S-2093	[15]	STRAP-CABLE
5.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
6.	7K-1181	[5]	STRAP-CABLE
7.	8T-9655	[8]	MOUNT-ISOLATION
8.	9L-1566	[3]	SUPPORT
9.	9L-6331	[1]	BRACKET
10.	114-9281	[2]	SWITCH AS-PRESSURE (AIR BRAKES)
			(EACH INCLUDES)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	131-4135	[1]	SWITCH AS-TEMPERATURE (HYDRAULIC OIL)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	169-5414	[5]	CLIP
13.	171-5941 Y	[1]	ELECTRONICS GP-POWER TRAIN
14.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
15.	185-4076	[1]	HARNESS AS-PLATFORM
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	127-5484	[3]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[4]	KIT-RECEPTACLE (6-PIN)
	102-8801	[8]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	127-5483	[3]	PLUG AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[6]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[11]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[4]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
16.	201-5244	[1]	PLATE AS
17.	6V-1889	[1]	CLIP (LOOP)
18.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
19.	130-5300	[8]	CLIP
20.	3J-1907	[1]	SEAL-O-RING
21.	3K-0360	[1]	SEAL-O-RING
22.	4D-7388	[2]	CLIP (LOOP)
23.	4D-7794	[11]	CLIP
24.	4K-8864	[1]	CLIP (LOOP)
25.	4L-6454	[4]	BOLT (3/8-16X1-IN)
26.	4P-8134	[2]	CLIP (LADDER)
27.	4S-4455	[1]	CLIP
28.	5M-3062	[31]	BOLT (3/8-16X0.75-IN)
29.	5S-7379	[1]	BOLT (3/8-16X0.875-IN)
30.	6D-4246	[1]	CLIP (LOOP)
31.	6V-3265	[3]	CLIP
32.	6V-3964	[4]	WASHER-HARD (8.8X25.5X5-MM THK)
33.	6V-8801	[4]	NUT (3/8-16-THD)
34.	7C-4354	[1]	CLIP
35.	7X-0440	[4]	BOLT (5/16-18X1.75-IN)
36.	8F-1974 B	[10]	SHIM (0.13-MM THK)
37.	8M-2770	[1]	CLIP (LOOP)
38.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
40.	8T-4647 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
41.	8T-4896	[40]	WASHER-HARD (10.2X18.5X2.5-MM THK)
42.	174-5907	[2]	CLIP (LOOP)
43.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
44.	8T-4133 M	[2]	NUT (M10X1.5-THD)
45.	7D-7233	[2]	CLIP (LOOP)
46.	8M-2773	[1]	CLIP (LOOP)
47.	114-9281	[1]	SWITCH AS-PRESSURE (PARKING BRAKE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)

	198-7332 FY	[1]	ELECTRONICS GP-MONITOR (CATERPILLAR MONITORING SYSTEM)
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP37540193

193-8255: WIRING GP-REAR

WIRING GP-REAR

193-8255 WIRING GP-REAR
S/N 1251-UP
PART OF 185-3142 SERVICE CENTER AR

i01864209 SEBP3754

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-0273	[1]	FITTING (RUBBER)
2.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
3.	3S-2093	[2]	STRAP-CABLE
4.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
5.	7K-4743	[2]	SPACER (10.31X25.4X6.35-MM THK)
6.	7V-9275	[1]	STRAP
7.	9L-1566	[1]	SUPPORT
8.	112-4428	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(27-CM)
9.	115-5593	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(119-CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
10.	118-3534	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING RELAY)
11.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
12.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY)
13.	169-5414	[1]	CLIP
14.	169-7262	[1]	HARNESS AS-REAR (SERVICE CENTER, RH)(SERVICE CENTER-RH)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
15.	169-7263	[1]	HARNESS AS-REAR (SERVICE CENTER, LH)(SERVICE CENTER-LH)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
16.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
16A.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
17.	177-8802	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(32-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
18.	177-9813	[1]	CABLE AS
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	5P-5675 D	[1]	WIRE (6-GA, BLACK)(.5-M)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
19.	177-9814	[1]	CABLE AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	6V-2369 D	[1]	CABLE (4-GA, BLACK)(.4-M)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
20.	178-0160	[1]	WIRE AS
21.	178-0162	[1]	CABLE AS
	5P-5689 D		WIRE (8-GA, BLACK)(.2-M)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
22.	178-0555	[1]	CABLE AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	6V-2369 D		CABLE (4-GA, BLACK)(.2-M)
23.	189-0108	[1]	PLATE (MAIN)
24.	194-1854	[1]	COVER
25.	194-4230	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(152-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
26.	194-6738	[1]	WIRE AS
27.	195-4990	[1]	WIRE AS
28.	033-8248	[1]	CLIP (LOOP)
29.	130-5300	[3]	CLIP
30.	132-6938	[1]	PLATE
31.	157-2528	[1]	SPACER (7X16X20-MM THK)
32.	174-5907	[6]	CLIP (LOOP)
33.	1S-0994	[2]	CLIP (LOOP)
34.	1S-1015	[1]	CLIP (LOOP)
35.	1V-6688	[1]	GROMMET
36.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
37.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
38.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
39.	4D-7794	[6]	CLIP
40.	4D-8948	[1]	CLIP
41.	4H-2558	[2]	GROMMET
42.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
43.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
44.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
45.	6D-3479	[1]	CLIP (LOOP)
46.	6K-8178	[4]	CLIP (LOOP)
47.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
48.	6V-7357 M	[1]	BOLT (M6X1X25-MM)
49.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
50.	7N-3718	[1]	CLIP
51.	7Y-8169	[1]	GROMMET
52.	8C-8451 M	[1]	BOLT (M6X1X40-MM)
53.	8M-2772	[1]	CLIP (LOOP)
54.	8T-0293 M	[1]	BOLT (M12X1.75X20-MM)
55.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
56.	8T-4133 M	[1]	NUT (M10X1.5-THD)
57.	8T-4136 M	[13]	BOLT (M10X1.5X25-MM)
58.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
59.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
60.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
61.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
62.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
63.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
64.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
65.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37540194

193-8603: WIRING GP-REAR

WIRING GP-REAR

193-8603 WIRING GP-REAR
S/N 1251-UP
PART OF 2C-9812 GENERAL AR

i01860164 SEBP3754

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(AUXILIARY BACKUP LAMPS)
2.	3S-2093	[7]	STRAP-CABLE
3.	7C-3254	[1]	PLATE
4.	7G-1060	[1]	STRAP AS-GROUND
5.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50CM)
6.	8W-1614	[1]	CLIP
7.	8W-8527	[1]	SLEEVE
8.	8W-8528	[4]	SLEEVE
9.	9U-2277	[1]	CLIP AS
10.	106-8704	[1]	SUPPRESSOR AS-ARC (A/C CLUTCH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
12.	123-3689	[1]	PLATE AS
	5M-6687	[1]	STUD-TAPERLOCK (3/8-16X1.28-IN)
13.	123-3692	[1]	ARM
14.	123-3695	[1]	PLATE
15.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND-LEVEL SHUTDOWN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
16.	139-6122	[1]	BOSS
17.	151-9839	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(37CM)
18.	169-3502	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE ASSEMBLY & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG ASSEMBLY & WEDGE)
19.	187-1008	[1]	SENDER AS-POSITION (STEERING ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9X-1813 E		SLEEVE (15CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
20.	194-7195	[1]	HARNESS AS-TRANSMISSION
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)(40 PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
21.	194-7215	[1]	HARNESS AS-REAR CHASSIS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	127-5483	[5]	PLUG AS-CONNECTOR (1-PIN)
22.	195-2497	[1]	BRACKET
23.	033-8248	[1]	CLIP (LOOP)
24.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
25.	115-3073	[1]	CLIP AS-CONNECTING
26.	130-5300	[8]	CLIP
27.	130-5301	[1]	CLIP
28.	174-5907	[2]	CLIP (LOOP)
29.	1S-0994	[3]	CLIP (LOOP)
30.	2S-3770	[1]	SPACER (11X19X33.5-MM THK)
31.	2V-3216	[1]	CLIP (LOOP)
32.	3E-5169	[1]	GUARD-SWITCH (RED)
33.	4D-1432	[1]	SPACER (12.52X17.14X45.72-MM THK)
34.	4D-7388	[1]	CLIP (LOOP)
35.	4D-7794	[7]	CLIP
36.	4S-4455	[4]	CLIP
37.	5C-2890 M	[1]	NUT (M6X1-THD)
38.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
39.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
40.	5P-1075	[1]	WASHER-HARD (10.2X22.5X3-MM THK)
41.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
42.	5P-4295	[1]	CLIP
43.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
44.	6D-4244	[4]	CLIP (LOOP)
45.	6D-4246	[2]	CLIP (LOOP)
46.	6V-5221 M	[1]	BOLT (M8X1.25X80-MM)
47.	6V-6893	[3]	BOLT (6-32X0.375-IN)
48.	6V-8801	[1]	NUT (3/8-16-THD)
49.	7C-4354	[5]	CLIP
50.	7X-2541 M	[1]	BOLT (M8X1.25X140-MM)
51.	8M-2770	[1]	CLIP (LOOP)
52.	8M-2773	[1]	CLIP (LOOP)
53.	8T-4121	[28]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4133 M	[4]	NUT (M10X1.5-THD)
55.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[17]	BOLT (M10X1.5X20-MM)
57.	8T-4179 M	[6]	BOLT (M12X1.75X20-MM)
58.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
59.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
60.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
61.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
62.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
63.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
64.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
65.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
66.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
67.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
68.	8W-8909	[2]	SLEEVE
69.	8X-5489	[1]	SLEEVE
70.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37540195

184-1299: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

184-1299 WIRING GP-REAR LIGHTING -RADIATOR
S/N 1251-UP
PART OF 2C-9812 GENERAL AR

i01891847 SEBP3754

1841299 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[9]	STRAP-CABLE
2.	213-9100	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 BE		SLEEVE
3.	231-4527	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
4.	130-5300	[5]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)(STOP, TAIL)
6.	5C-2890 M	[6]	NUT (M6X1-THD)
7.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
8.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
9.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37540196

159-5845: WIRING GP-STEERING CONSOLE

WIRING GP-STEERING CONSOLE

159-5845 WIRING GP-STEERING CONSOLE
S/N 1251-UP
PART OF 2C-9812 GENERAL AR

i01859443 SEBP3754

1595845 WIRING GP-STEERING CONSOLE Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0109	[1]	PLUG (ROCKER SWITCH)(LIGHTBAR LOWBEAM CONNECTOR)
2.	3E-6477	[1]	RELAY AS (24-VOLT)(TAIL/PANEL LAMPS)
3.	3S-2093	[8]	STRAP-CABLE
4.	9W-1441	[1]	FUSE (15-AMPERE)(TRANSMISSION)
5.	9W-1442	[11]	FUSE (10-AMPERE)(INSTRUMENT PANEL)
6.	102-9383	[1]	PLATE
7.	112-6175	[2]	SWITCH AS-LIMIT (BRAKE/INCHING PEDALS)
			(EACH INCLUDES)
	6V-8376	[3]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[3]	LOCKWASHER
8.	169-3283	[1]	HARNESS AS-CONSOLE (STEERING)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	127-5484	[2]	RECEPTACLE AS-CONNECTOR (1-PIN)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2269	[2]	PLUG AS-CONNECTOR (2-PIN)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
9.	180-4028	[2]	BRACKET
10.	180-7033	[1]	COVER
11.	186-1714	[1]	FILM-FUSE (LH)
12.	186-1715	[1]	FILM-FUSE (RH)
13.	194-4181	[1]	RESISTOR AS
	8C-3334	[1]	RIVET-TUBULAR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	1S-9593	[1]	STRAP-CABLE
	5P-6008 E		TUBE-HEAT SHRINK (6.35-MM DIA)(100CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	130-5300	[2]	CLIP
15.	139-2120	[1]	SWITCH AS (DIFFERENTIAL LOCK)
	3E-8825	[2]	LAMP (24-VOLT)(DIFFERENTIAL LOCK INDICATOR)
	123-5861	[1]	ACTUATOR
16.	151-4957 M	[4]	BOLT-SOCKET HEAD (M3X0.5X25-MM)
17.	174-8131 M	[1]	SCREW-TRUSS HEAD (M4X0.7X12-MM)
18.	228-5009	[3]	CLIP
19.	3C-6969 M	[4]	NUT (M3X0.5-THD)
20.	3E-9324	[1]	SWITCH AS (PANEL LAMP DIMMER)
	3E-8783	[1]	ACTUATOR
	3E-8825	[1]	LAMP (24-VOLT)(PANEL LAMP DIMMER INDICATOR)
21.	3E-8763	[1]	SWITCH AS (24-VOLT)(TAIL LAMP)
	3E-8825	[1]	LAMP (24-VOLT)(TAIL LAMP INDICATOR)
	3E-9323	[1]	ACTUATOR
22.	3L-8187	[4]	LOCKWASHER
23.	4B-1281	[4]	SCREW-MACHINE (1/4-20X0.625-IN)
24.	4B-4274	[16]	WASHER (5.5X13X1.2-MM THK)
25.	4D-1212	[1]	GROMMET
26.	5C-2890 M	[3]	NUT (M6X1-THD)
27.	5C-8312 M	[1]	NUT (M4X0.7-THD)
28.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
29.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
30.	6D-4244	[2]	CLIP (LOOP)
31.	6J-0488	[1]	SCREW-BUTTON HEAD (3/8-16X0.875-IN)
32.	6V-8185	[4]	NUT (1/4-20-THD)
33.	6V-8801	[1]	NUT (3/8-16-THD)
34.	8C-7508	[2]	LOCKWASHER
35.	8J-1256	[1]	CLIP (LOOP)
36.	8L-6521	[8]	BOLT (10-32X0.5-IN)
37.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
38.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
39.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
40.	9P-2553	[1]	SPACER (6.83X10.28X11-MM THK)
41.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
42.	9X-2042 M	[1]	SCREW-TRUSS HEAD (M6X1X12-MM)
43.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
44.	3E-0109	[1]	PLUG (ROCKER SWITCH)(ETHER STARTING AID)
45.	3E-0109	[1]	PLUG (ROCKER SWITCH)(FLOOD LAMP CONECTOR)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37540197

180-9146: CASE & PARTS GP-TRANSMISSION

CASE & PARTS GP-TRANSMISSION

180-9146 CASE & PARTS GP-TRANSMISSION
S/N PBS1-1543; BSZ1-99999
PART OF 191-3606 TRANSMISSION AR

i01892826 SEBP3754

1809146 CASE & PARTS GP-TRANSMISSION Parts scheme

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-9158	[1]	CASE AS
	7T-6496	[7]	PLUG
	8M-6521	[2]	DOWEL
2.	6Y-5728	[1]	COVER AS-TRANSMISSION
	7T-6496	[1]	PLUG
3.	6V-1820 M	[37]	BOLT (M10X1.5X30-MM)
4.	8T-5436 M	[2]	BOLT (M10X1.5X130-MM)
5.	9S-4185	[2]	PLUG (3/4-16-THD)
6.	3K-0360	[9]	SEAL-O-RING
7.	2J-0157	[1]	SEAL-O-RING
8.	1U-8846 B		SEALANT-GASKET
9.	8T-6765	[1]	PLUG-PIPE (1/4-18-THD)
10.	5M-6200	[1]	SEAL-O-RING
11.	8E-1133	[1]	TUBE AS
12.	6L-1650	[1]	SEAL-O-RING
13.	6V-5217 M	[13]	BOLT (M8X1.25X20-MM)
14.	5P-3863	[5]	SEAL-O-RING
15.	9W-1454	[5]	COVER
16.	8S-9129	[1]	FILTER-MAGNETIC (TMSN OIL)
17.	8S-9130	[1]	SCREEN-SUCTION (TMSN OIL)
18.	4M-6108	[2]	RACE-BEARING OUTER
19.	148-1925	[2]	VALVE-RELIEF
20.	9X-4609	[2]	SEAL-O-RING
21.	9W-7038	[1]	RING-SNAP
22.	6V-3940 M	[4]	BOLT (M8X1.25X25-MM)
23.	6Y-9763	[1]	GEAR AS
	4K-8603	[1]	PLUG-CUP
24.	2S-3029	[1]	BALL BEARING
25.	9W-6465	[1]	RETAINER-BEARING
26.	9S-4190	[5]	PLUG-O-RING (7/8-14-THD)
27.	2M-9780	[6]	SEAL-O-RING
28.	9S-4191	[1]	PLUG (9/16-18-THD)
29.	3J-1907	[2]	SEAL-O-RING
30.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
31.	190-1684	[1]	PLATE AS
32.	6V-8212 M	[1]	BOLT (M10X1.5X16-MM)
33.	5P-4483	[1]	PLUG
34.	7M-8485	[4]	SEAL-O-RING
35.	6V-7981 M	[5]	BOLT (M10X1.5X70-MM)
36.	6V-4248 M	[8]	BOLT (M10X1.5X25-MM)
37.	9S-8006	[1]	PLUG (7/8-14-THD)
38.	9S-8005	[4]	PLUG (3/4-16-THD)
39.	6I-8642	[4]	RACE-BEARING OUTER
40.	5P-3924	[2]	RACE-BEARING OUTER
41.	9M-2042	[1]	RACE-BEARING OUTER
42.	191-3680	[1]	COVER AS
	4F-2609	[2]	DOWEL
43.	2H-6489	[1]	RACE-BEARING OUTER
44.	226-6621	[1]	HARNESS AS-SENSOR (TMSN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)(TMSN CONTROL)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)(TMSN SPEED SENSOR)
			(EACH INCLUDES PLUG AS & WEDGE)
45.	191-9256	[2]	CLIP
46.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
48.	183-8597 Y	[1]	SENSOR GP-SPEED (TMSN INPUT SPEED)
49.	201-0387	[1]	CLIP AS
50.	8T-4133 M	[1]	NUT (M10X1.5-THD)
51.	143-5373	[1]	GUARD AS
52.	5P-9299	[1]	CLIP (LOOP)
53.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (TMSN OIL)
54.	4P-7581	[1]	CLIP (LADDER)
55.	9S-4181	[3]	PLUG (1-5/16-12-THD)
56.	1B-5174	[1]	PLUG-PIPE
57.	113-7745	[1]	PLATE AS
58.	7K-1181	[1]	STRAP-CABLE
59.	206-3713	[1]	PLATE AS
60.	145-8039	[3]	LOCK
61.	133-5631	[1]	PLUG
62.	5F-1678	[1]	SEAL-O-RING
63.	6V-5219 M	[4]	BOLT (M8X1.25X40-MM)
64.	190-5212	[1]	ROTOR
65.	6V-8202 M	[4]	BOLT-SOCKET HEAD (M8X1.25X16-MM)
66.	130-5300	[1]	CLIP
67.	206-3714	[1]	PLATE
68.	6V-2317 M	[2]	BOLT (M8X1.25X30-MM)
69.	183-8597 Y	[2]	SENSOR GP-SPEED (TMSN OUTPUT SPEED)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37540198

180-9146: CASE & PARTS GP-TRANSMISSION

CASE & PARTS GP-TRANSMISSION

180-9146 CASE & PARTS GP-TRANSMISSION
S/N PBS1544-UP
PART OF 191-3606 TRANSMISSION AR

i02325062 SEBP3754

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-9158	[1]	CASE AS
	7T-6496	[7]	PLUG
	8M-6521	[2]	DOWEL
2.	6Y-5728	[1]	COVER AS-TRANSMISSION
	7T-6496	[1]	PLUG
3.	6V-1820 M	[37]	BOLT (M10X1.5X30-MM)
4.	8T-5436 M	[2]	BOLT (M10X1.5X130-MM)
5.	9S-4185	[2]	PLUG (3/4-16-THD)
6.	3K-0360 C	[8]	SEAL-O-RING
7.	2J-0157	[1]	SEAL-O-RING
8.	1U-8846 B		SEALANT-GASKET (15-ML)
9.	8T-6765	[1]	PLUG-PIPE (1/4-18-THD)
10.	5M-6200	[1]	SEAL-O-RING
11.	8E-1133	[1]	TUBE AS
12.	6L-1650	[1]	SEAL-O-RING
13.	6V-5217 M	[13]	BOLT (M8X1.25X20-MM)
14.	5P-3863	[5]	SEAL-O-RING
15.	9W-1454	[5]	COVER
16.	8S-9129	[1]	FILTER-MAGNETIC (TRANSMISSION)
17.	8S-9130	[1]	SCREEN-SUCTION (TRANSMISSION CASE)
18.	4M-6108	[2]	RACE-BEARING OUTER
19.	148-1925	[2]	VALVE-RELIEF
20.	9X-4609	[2]	SEAL-O-RING
21.	9W-7038	[1]	RING-SNAP
22.	6V-3940 M	[4]	BOLT (M8X1.25X25-MM)
23.	6Y-9763	[1]	GEAR AS
	6Y-1007	[1]	GEAR (38-TEETH)
	4K-8603	[1]	PLUG-CUP
24.	2S-3029	[1]	BALL BEARING
25.	9W-6465	[1]	RETAINER-BEARING
26.	9S-4190	[5]	PLUG-O-RING (7/8-14-THD)
27.	2M-9780	[6]	SEAL-O-RING
28.	9S-4191	[1]	PLUG (9/16-18-THD)
29.	3J-1907	[2]	SEAL-O-RING
30.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
31.	190-1684	[1]	PLATE AS
32.	6V-8212 M	[1]	BOLT (M10X1.5X16-MM)
33.	5P-4483	[1]	PLUG
34.	7M-8485	[1]	SEAL-O-RING
35.	6V-7981 M	[5]	BOLT (M10X1.5X70-MM)
36.	6V-4248 M	[8]	BOLT (M10X1.5X25-MM)
37.	9S-8006	[1]	PLUG (7/8-14-THD)
38.	9S-8005	[4]	PLUG (3/4-16-THD)
39.	6I-8642	[4]	RACE-BEARING OUTER
40.	5P-3924	[2]	RACE-BEARING OUTER
41.	9M-2042	[1]	RACE-BEARING OUTER
42.	248-2046 C	[1]	COVER AS
43.	2H-6489	[1]	RACE-BEARING OUTER
44.	226-6621	[1]	HARNESS AS-SENSOR
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
45.	191-9256	[2]	CLIP
46.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
47.	6V-1720	[1]	PLATE-SERIAL NUMBER (TRANSMISSION)
48.	183-8597 CY	[2]	SENSOR GP-SPEED (TRANSMISSION OUTPUT)
49.	201-0387	[1]	CLIP AS
50.	8T-4133 M	[1]	NUT (M10X1.5-THD)
51.	143-5373	[1]	GUARD AS
52.	5P-9299	[1]	CLIP (LOOP)
53.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION OIL)
54.	4P-7581	[1]	CLIP (LADDER)
55.	164-4180	[3]	PLUG AS
			(EACH INCLUDES)
	9S-4181	[1]	PLUG (1-5/16-12-THD)
	7M-8485	[1]	SEAL-O-RING
56.	1B-5174	[1]	PLUG-PIPE
57.	113-7745	[1]	PLATE AS
58.	7K-1181	[1]	STRAP-CABLE
59.	206-3713	[1]	PLATE AS
60.	145-8039	[3]	LOCK
61.	133-5631	[1]	PLUG
62.	5F-1678	[1]	SEAL-O-RING
63.	6V-5219 M	[4]	BOLT (M8X1.25X40-MM)
64.	190-5212	[1]	ROTOR
65.	6V-8202 M	[4]	BOLT-SOCKET HEAD (M8X1.25X16-MM)
67.	206-3714	[1]	PLATE
68.	6V-2317 M	[2]	BOLT (M8X1.25X30-MM)
69.	191-8303 C	[1]	SENSOR GP-SPEED (TRANSMISSION INPUT)
70.	117-1385 C	[1]	SEAL-O-RING
71.	9M-1974 C	[1]	WASHER-HARD (8.8X16X2-MM THK)
72.	6V-5215 CM	[1]	BOLT (M8X1.25X16-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37540199

6G-1755: CHAIN GP-DRIVE

CHAIN GP-DRIVE

6G-1755 CHAIN GP-DRIVE
S/N 1251-UP
PART OF 2C-9812 GENERAL AR

i01886628 SEBP3754

For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6G-1633	[4]	CHAIN GP
			(EACH INCLUDES)
2.	6G-1631	[1]	LINK-CONNECTING

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
12H Motor Grader

Fuses - Replace
12H Motor Grader

Battery Disconnect Switch
12H Motor Grader

Circuit Breakers - Reset
12H Motor Grader

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Procedure to Improve the Starting Capability for Motor Graders{1090, 1408, 1456}
Procedure to Improve the Starting Capability for Motor Graders{1090, 1408, 1456}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR UPDATING TRANSMISSION SOFTWARE ON CERTAIN 143H, 163H, 12H, 160H, AND 140H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING TRANSMISSION SOFTWARE ON CERTAIN 143H, 163H, 12H, 160H, AND 140H MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Position Sender (Articulation)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Magnetic Switch (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System

Pressure Switch (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System

Speed Sensor (Transmission Output)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train

Temperature Switch (Hydraulic Oil)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Temperature Sensor (Transmission Oil)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train

Ball Switch (Centershift Indicator)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System

Speed Sensor (Transmission Input)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train

Toggle Switch (Ground Level Shutdown)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train

Pressure Switch (Low Brake Air)
12H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Pressure Switch (Brake Air) (Stop Lamp)
12H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Pressure Switch (Brake Air) (Parking Brake)
12H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Action Lamp
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Action Alarm
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Sensors
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Pressure Switch (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System

Senders
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Switches
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Wiring Harness (Short Circuit) - Test
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Wiring Harness (Open Circuit) - Test
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Electrical Connector - Inspect
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Wiring Harness (Open Circuit) - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Wiring Harness (Short Circuit) - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Electrical Connector - Inspect
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Pressure Switch (Low Brake Air) - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C-9 Engine for the 12H Motor Grader

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C-9 Engine for the 12H Motor Grader

Electrical Connectors - Inspect
C-9 Engine for the 12H Motor Grader

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for the 12H Motor Grader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 12H Motor Grader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 12H Motor Grader

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for the 12H Motor Grader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 12H Motor Grader

CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for the 12H Motor Grader

CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for the 12H Motor Grader

CID 0548 FMI 06 Throttle Lock Lamp short
C-9 Engine for the 12H Motor Grader

CID 0548 FMI 05 Throttle Lock Lamp open circuit
C-9 Engine for the 12H Motor Grader

MID 030 - CID 0324 - FMI 03
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 05
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 06
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for the 12H Motor Grader

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for the 12H Motor Grader

CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for the 12H Motor Grader

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 12H Motor Grader

Electrical Component and Connector Locations
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Switch Circuits
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Alert Indicator Is Always Flashing
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

Alert Indicator Never Flashes
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for the 12H Motor Grader

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for the 12H Motor Grader

Air Inlet Heater Circuit - Test
C-9 Engine for the 12H Motor Grader

CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 12H Motor Grader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for the 12H Motor Grader

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 12H Motor Grader

CID 1627 FMI 05 Fuel Pump Relay open circuit
C-9 Engine for the 12H Motor Grader

CID 1627 FMI 06 Fuel Pump Relay short to ground
C-9 Engine for the 12H Motor Grader

Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for the 12H Motor Grader

Connector Locations
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 030 - CID 0615 - FMI 03
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

MID 030 - CID 0615 - FMI 04
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System

MID 081 - CID 0868 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 0868 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 0868 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 0444 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 0444 - FMI 05
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 0444 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 1484 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

MID 081 - CID 1484 - FMI 04
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders

Throttle Position Sensor Circuit - Test
C-9 Engine for the 12H Motor Grader

Digital Sensor Supply Circuit - Test
C-9 Engine for the 12H Motor Grader

Electrical Power Supply Circuit - Test
C-9 Engine for the 12H Motor Grader

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
C-9 Engine for the 12H Motor Grader

Engine Fan Control Solenoid Circuit - Test
C-9 Engine for the 12H Motor Grader

Throttle Lock Switch Circuit - Test
C-9 Engine for the 12H Motor Grader

Throttle Lock Lamp Circuit - Test
C-9 Engine for the 12H Motor Grader

Engine Shutdown Switch Circuit - Test
C-9 Engine for the 12H Motor Grader

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 12H Motor Grader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for the 12H Motor Grader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 12H Motor Grader

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 12H Motor Grader

Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for the 12H Motor Grader

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 12H Motor Grader

Sensors and Electrical Connectors
C-9 Engine for the 12H Motor Grader

CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for the 12H Motor Grader

CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for the 12H Motor Grader

Cat Data Link Circuit - Test
C-9 Engine for the 12H Motor Grader

5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for the 12H Motor Grader

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 12H Motor Grader

Engine Wiring Information
C-9 Engine for the 12H Motor Grader

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for the 12H Motor Grader

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for the 12H Motor Grader

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Cable Assembly Has Been Rerouted for Improved Service Life {1408}
2005/02/07

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

The Certification Conversion Arrangement is Updated {1432, 4493}
2008/03/03

A Improvement to Circuit for the Brake Lamp Has Been Made {1432, 4493}
2007/12/31

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

A New Injector Wiring Harness Kit Is Available to Make Repairs on Certain Machine Engines {1254, 1290, 1408}
2010/12/06

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 12H :

222-9135 WIRING GP-ENGINE ELECTRONIC

159-5839 WIRING GP-CONSOLE

203-6551 WIRING GP-CAB

159-5878 WIRING GP-CAB

161-1022 WIRING GP-BLADE CUSHION

223-4453 SWITCH GP-MAGNETIC

167-0138 SWITCH GP-MAGNETIC

7N-0718 SWITCH GP-DISCONNECT

234-2432 WIRING GP-ENGINE ELECTRONIC

159-5856 WIRING GP-FRONT

193-8255 WIRING GP-REAR

193-8603 WIRING GP-REAR

184-1299 WIRING GP-REAR LIGHTING

159-5845 WIRING GP-STEERING CONSOLE

180-9146 CASE & PARTS GP-TRANSMISSION

Truck sale:

115,000

Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico

116,500

Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico

87,000

Caterpillar 12H, Construction
- motor graders
MADISA
Mexico

106,008

Caterpillar 12 H, Construction
- motor graders
TRACTAFRIC EQUIPMENT
Netherlands

90,000

Caterpillar 12H, Construction
- motor graders
NMC