167-8053 CONSOLE GP-OPERATOR S/N 1251-UP PART OF 2C-9812 GENERAL AR 12H MOTOR GRADER



OPERATOR STATION
CONSOLE GP
CONTROL GP-HYDRAULIC
CONTROL GP
CONTROL GP-STEERING
DOOR GP

MOTOR GRADER 12H MOTOR GRADER 125
 12H Motor Grader 12500001-UP (MACHINE) POWERED BY C-9 Engine SEBP3754 12H 125   (2003)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
167-8053 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
 

#SEBP37540410
 

167-8053: CONSOLE GP-OPERATOR

167-8053 CONSOLE GP-OPERATOR
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i01891116 SEBP3754
1678053 CONSOLE GP-OPERATOR Parts scheme 1678053 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 2G-8572 [8] WASHER-SPECIAL  
2. 2G-8573 [8] CAP  
3. 2K-5830 [2] BEARING AS-NEEDLE  
4. 3B-4607 [2] PIN-COTTER  
5. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
6. 3Y-2806 [1] SPRING  
7. 4B-4314 [1] RIVET  
8. 6G-2914 [1] LATCH  
9. 6G-8814 [2] BRACKET  
10. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
11. 7I-4890 [1] PLATE AS  
12. 8C-3442 [1] SPRING-COIL  
13. 8D-5641 B [14] BEARING  
14. 8D-7960 [2] PLATE  
15. 8L-7905 [2] RIVET-POP  
16. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
17. 8X-1904 [1] SPACER (20X35X26-MM THK)  
18. 8X-1908 [1] PANEL  
19. 8X-1911 [1] PANEL  
20. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
21. 8X-1914 [1] SHAFT  
22. 8X-1921 [1] HOOD  
23. 8X-2160 [1] LEVER (STEERING WHEEL TILT CONTROL)  
24. 8X-2161 [1] LEVER (STEERING COLUMN TILT)  
25. 8X-2893 M [10] NUT (M4X0.7-THD)  
26. 8X-3789 [1] PANEL  
27. 8X-3951 [1] PANEL  
28. 8X-3965 [1] RATCHET  
29. 8X-5123 [1] RETAINER  
30. 031-2666 [1] ROD  
31. 034-1994 [1] PIN  
32. 110-6241 [1] BRACKET  
33. 177-7448 [1] CHANNEL AS  
34. 183-1425 [1] BASE  
35. 204-6488 [1] CHANNEL AS  
36. 206-9651 [2] PLATE  
37. 230-9138 [8] PLUG  
38. 236-0737 [1] CYLINDER  
39. 2A-7184 [2] PLATE  
40. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
41. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
42. 174-8131 M [16] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
43. 2K-7979 [13] BUSHING  
44. 3E-8043 [4] SCREW (3/8-16X0.75-IN)  
45. 3F-7514 [4] PIN  
46. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
47. 5C-8312 M [6] NUT (M4X0.7-THD)  
48. 5M-8500 [1] KNOB (STEERING WHEEL TILT CONTROL)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
51. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
52. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
53. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
54. 8T-1174 [4] SEAL-LIP TYPE  
55. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
56. 8T-4133 M [1] NUT (M10X1.5-THD)  
57. 8X-1907 [1] SHAFT  
58. 9M-5590 [1] BALL  
59. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
60. 5P-5637 BD SEAL  
61. 5P-5639 BD SEAL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP37540411
 

167-9002: CONSOLE GP-OPERATOR

167-9002 CONSOLE GP-OPERATOR
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i01889966 SEBP3754
1679002 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7M-0706 [1] KNOB (SPEED CONTROL)  
2. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
3. 8X-8096 [1] FILM-COVER (COVER BLACK)  
4. 143-9290 [1] PLATE AS  
5. 169-2621 [1] GATE AS  
6. 169-3380 [1] PLATE AS  
7. 180-3531 [1] CONTROL GP-TRANSMISSION  
8. 171-2122 [1] COVER  
9. 172-7105 [1] FILM-IDENTIFICATION (TRANSMISSION, PARKING BRAKE)(TMSN DIRECTION & PARKING)  
10. 172-7106 [1] FILM-IDENTIFICATION (SPEED SELECT)(SPEED CONTROL)  
11. 185-2274 [1] FILM-INFORMATION (ENGINE, HIGH IDLE, HOLD)(ENGINE-HIGH IDLE-HOLD)  
12. 185-2287 [1] FILM-INFORMATION (ENGINE, LOW IDLE, HOLD)(ENGINE-LOW IDLE-HOLD)  
13. 187-0491 [1] COVER  
14. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
15. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
16. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
17. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP37540412
 

167-0287: CONTROL GP-BULLDOZER HYDRAULIC

167-0287 CONTROL GP-BULLDOZER HYDRAULIC
S/N 1251-UP
PART OF 3Q-9264, 3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC
AN ATTACHMENT
i01919647 SEBP3754
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)  
  101-1970 [1] LEVER AS (RIPPER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540413
 

3Q-9264: CONTROL GP-BULLDOZER HYDRAULIC

3Q-9264 CONTROL GP-BULLDOZER HYDRAULIC
S/N 1251-UP
LIFT
PART OF 3Q-9350 BULLDOZER AR-LIFT
AN ATTACHMENT
i01918826 SEBP3754
3Q9264 CONTROL GP-BULLDOZER HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. Y [1] CONTROL GP-BULLDOZER HYDRAULIC (FRONT BLADE LIFT)  
2. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
3. 8T-9043 [2] BOLT (5/16-18X0.875-IN)  
4. 3F-9556 [2] LOCKWASHER  
5. 8X-4276 [1] ROD  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  7H-3641 [2] END-ROD (5/16-24-THD)  
6. 8D-5641 [1] BEARING  
7. 101-2458 [1] LEVER (FRONT BLADE LIFT)  
8. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
9. 7M-0706 [1] KNOB (FRONT BLADE LIFT)  
10. 8W-0456 [1] SHAFT  
11. 8T-9101 [1] BOLT (3/8-16X2.75-IN)  
12. 8D-5640 [1] BEARING  
13. 101-0509 [1] SEAL-INTEGRAL  
14. 112-9164 [1] BOOT  
15. 3K-0360 [4] SEAL-O-RING  
16. 8T-0076 [1] CONNECTOR  
17. 6V-8397 [4] SEAL-O-RING  
18. 6V-8634 [1] CONNECTOR  
19. I [1] HOSE AS  
20. 122-2340 [1] CONNECTOR  
21. 7X-0289 [2] BOLT (3/8-16X1.875-IN)  
22. 5P-6944 [1] ADAPTER  
23. 5D-2645 [2] CLAMP  
24. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(LIFT CYLINDER ROD END)  
25. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
26. 6V-8723 [1] ELBOW  
27. 6D-4244 [2] CLIP (LOOP)  
28. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 3J-1907 [1] SEAL-O-RING  
30. I [1] HOSE AS  
31. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
32. 3B-8485 [1] ELBOW (LIFT CYLINDER HEAD)  
33. 100-4336 [1] CLIP (LOOP)  
34. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
35. 7X-0288 [1] BOLT (3/8-16X1.625-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540414
 

3Q-9265: CONTROL GP-BULLDOZER HYDRAULIC

3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC
S/N 1251-UP
LIFT & TILT
PART OF 3Q-9351 BULLDOZER AR-LIFT & TILT
AN ATTACHMENT
i01919944 SEBP3754
3Q9265 CONTROL GP-BULLDOZER HYDRAULIC Parts scheme 3Q9265 CONTROL GP-BULLDOZER HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. Y [1] CONTROL GP-BULLDOZER HYDRAULIC (FRONT BLADE LIFT)  
2. 7X-2543 M [3] BOLT (M10X1.5X120-MM)  
3. 8T-9043 [4] BOLT (5/16-18X0.875-IN)  
4. 3F-9556 [4] LOCKWASHER  
5. 8X-4277 [2] ROD AS  
5A. 6V-8186 [4] NUT-FULL (5/16-24-THD)  
5B. 7H-3641 [4] END-ROD (5/16-24-THD)  
  8L-8598 [4] ROD END  
  146-0705 [4] ROD  
6. 8D-5641 [2] BEARING  
7. 101-2458 [1] LEVER (FRONT BLADE LIFT)  
8. 6L-1962 [2] NUT-JAM (3/8-24-THD)  
9. [1] KNOB (FRONT BLADE LIFT)  
10. 8W-0456 [2] SHAFT  
11. 8T-9378 [1] BOLT (3/8-16X4-IN)  
12. 8D-5640 [2] BEARING  
13. 101-0509 [2] SEAL-INTEGRAL  
14. 112-9164 [2] BOOT  
15. 3K-0360 [6] SEAL-O-RING  
16. 8T-0076 [2] CONNECTOR  
17. 6V-8397 [6] SEAL-O-RING  
18. 6V-8634 [2] CONNECTOR  
19. I [1] HOSE AS  
20. 122-2340 [1] CONNECTOR  
21. 7X-0289 [2] BOLT (3/8-16X1.875-IN)  
22. 5P-6944 [1] ADAPTER  
23. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
24. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(FRT BLD TLT/LFT ROD/TLT HD END)  
25. 2B-0941 [3] SPACER (10.5X19X19-MM THK)  
26. 148-8374 [3] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
27. 6D-4244 [7] CLIP (LOOP)  
28. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 3J-1907 [1] SEAL-O-RING  
30. I [1] HOSE AS  
31. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
32. 108-1610 [2] CLAMP  
33. 9R-8870 [1] BLOCK  
34. 103-1597 [1] LEVER (FRONT BLADE TILT)  
35. [1] KNOB (FRONT BLADE TILT)  
36. 107-0547 Y [1] VALVE GP-CONTROL (BULLDOZER LIFT, PLOW)(PLOW/DOZER/FRONT BLADE TILT)  
37. 180-5453 I [1] HOSE AS  
38. I [1] HOSE AS  
39. 5P-0599 [1] CLAMP-BAND  
40. 100-4336 [1] CLIP (LOOP)  
41. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
42. 4S-4455 [2] CLIP  
43. 3B-8485 [1] ELBOW (FRONT BLADE CYLINDER HEAD END)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540415
 

159-5933: CONTROL GP-CLUTCH

159-5933 CONTROL GP-CLUTCH
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i01888862 SEBP3754
1595933 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 1B-2578 [1] NUT (3/8-16-THD)  
2. 1F-4622 [2] BEARING AS-NEEDLE  
3. 5P-9209 [2] BEARING AS-NEEDLE  
4. 7V-0446 [2] CLIP  
5. 9J-8783 [1] SHIM (0.508-MM THK)  
6. 116-5710 [1] GROMMET  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 169-0922 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 214-4863 Y [1] SENSOR GP-POSITION (ROTARY)(CLUTCH)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 130-5300 [1] CLIP  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 3H-8538 [1] PIN  
26. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
27. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
28. 4J-8922 [1] ROD END (3/8-24-THD)  
29. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
30. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
31. 6V-0894 [1] SEAL-O-RING  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
40. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-5390 [1] BOLT (3/8-16X3.5-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540416
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i00124760 SEBP3754
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 7I-4700 [1] NUT  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540417
 

2C-9691: DOOR GP-CAB

2C-9691 DOOR GP-CAB -LOW PROFILE-RH
S/N 1251-UP
PART OF 8X-4527 DOOR GP-CAB
i00659765 SEBP3754
2C9691 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 199-2737 [1] DOOR AS (RH)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8X-4446 [1] GLASS  
3. 107-9641 [1] PLATE AS  
4. 8T-4181 M [6] BOLT (M6X1X20-MM)  
5. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
6. 8Y-4400 [1] LATCH AS-DOOR  
7. 6V-7636 [4] PIN AS-SPRING  
8. 8Y-4398 [1] LINK-CONNECTING  
9. 9X-2546 M [4] BOLT (M6X1X20-MM)  
10. 8Y-4401 [1] HANDLE AS (INSIDE)  
11. 8X-4243 [1] COVER (RH)  
12. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 8X-4262 [1] COVER (RH)  
14. 8X-4245 M [1] BOSS (M6X1X18-MM)  
15. 8Y-4620 [1] LINK-CONNECTING  
16. 1H-3338 [1] LOCKWASHER  
17. 5T-7486 [1] RETAINER-SPRING  
18. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
19. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
20. 8X-4448 [1] GLASS  
21. 8X-4066 [1] HINGE  
22. 6D-6581 [14] RIVET-POP  
23. 199-2712 [1] HANDLE (HANDHOLD)  
24. 5P-5768 BD SEAL  
25. 108-5950 [1] LATCH AS  
26. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 199-2677 [1] LINK (RELEASE)  
29. 108-5952 [1] LINK (RH)  
30. 128-0037 [1] KNOB-BALL  
31. 114-9190 [1] SEAL  
32. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 140-5485 [2] PLUG  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP37540418
 

2C-9692: DOOR GP-CAB

2C-9692 DOOR GP-CAB -LOW PROFILE-LH
S/N 1251-UP
PART OF 8X-4527 DOOR GP-CAB
i00660324 SEBP3754
2C9692 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 199-2738 [1] DOOR AS (LH)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8X-4446 [1] GLASS  
3. 107-9641 [1] PLATE AS  
4. 8T-4181 M [6] BOLT (M6X1X20-MM)  
5. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
6. 8Y-4399 [1] LATCH AS-DOOR  
7. 6V-7636 [4] PIN AS-SPRING  
8. 8Y-4398 [1] LINK-CONNECTING  
9. 9X-2546 M [4] BOLT (M6X1X20-MM)  
10. 8Y-4401 [1] HANDLE AS (INSIDE)  
11. 8X-4244 [1] COVER (LH)  
12. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 8X-4263 [1] COVER (LH)  
14. 8X-4245 M [1] BOSS (M6X1X18-MM)  
15. 8Y-4620 [1] LINK-CONNECTING  
16. 1H-3338 [1] LOCKWASHER  
17. 5T-7486 [1] RETAINER-SPRING  
18. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
19. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
20. 8X-4448 [1] GLASS  
21. 8X-4066 [1] HINGE  
22. 6D-6581 [14] RIVET-POP  
23. 199-2712 [1] HANDLE (HANDHOLD)  
24. 5P-5768 BD SEAL  
25. 108-5949 [1] LATCH AS (LH)  
26. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 199-2677 [1] LINK (RELEASE)  
29. 108-5951 [1] LINK (LH)  
30. 128-0037 [1] KNOB-BALL  
31. 114-9190 [1] SEAL  
32. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 140-5485 [2] PLUG  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP37540419
 

8X-4527: DOOR GP-CAB

8X-4527 DOOR GP-CAB
S/N 1251-UP
PART OF 172-5377 ROPS GP
i00654869 SEBP3754
8X4527 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 2C-9692 CY [1] DOOR GP-CAB  
2. 2C-9691 CY [1] DOOR GP-CAB (RH)  
3. 138-4054 CM [5] SCREW-FLAT HEAD (M6X1X45-MM)  
4. 129-3178 CM [28] LOCKNUT (M6X1-THD)  
5. 9X-8256 C [28] WASHER (6.6X12X2-MM THK)  
6. 122-2228 BE SEAL  
7. 124-8843 [2] PLATE AS  
8. 4J-3915 B [8] SHIM (1.52-MM THK)  
9. 6V-5158 [2] STRIKER AS-BODY  
11. 8C-8454 CM [23] SCREW-MACHINE (M6X1X20-MM)  
12. 107-6813 [2] PLATE AS  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
16. 106-6553 [4] BUMPER-CONICAL  
17. 5P-5969 BD SEAL  
18. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
21. 126-4966 [2] PLATE  
22. 178-8894 BE SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Brakes, Indicators and Gauges - Test
12H Motor Grader
Special Instruction
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Technical Information Bulletin
Specifications
Operator Console
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Service Magazine
A New Cylinder for the Operator's Console Improves Service Life {5258}
2003/06/23

Caterpillar Parts SIS Catalog 12H :

CONDENSER & MTG GP-REFRIGERANT
197-7659 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
167-0165 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
ARMREST GP
113-4245 ARMREST GP
ARMREST GP
113-4242 ARMREST GP
AIR CONDITIONER GP
174-4548 AIR CONDITIONER GP
176-1731 AIR CONDITIONER AR
173-5313 AIR CONDITIONER & MOUNTING GP
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
167-0287 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9264 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-CLUTCH
159-5933 CONTROL GP-CLUTCH
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
DOOR GP-CAB
2C-9691 DOOR GP-CAB
DOOR GP-CAB
2C-9692 DOOR GP-CAB

Truck sale:

Caterpillar 12H, Construction
115,000 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
116,500 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
87,000 
Caterpillar 12H, Construction
- motor graders
MADISA
Mexico
Caterpillar 12 H, Construction
106,008 
Caterpillar 12 H, Construction
- motor graders
TRACTAFRIC EQUIPMENT
Netherlands
Caterpillar 12H, Construction
90,000 
Caterpillar 12H, Construction
- motor graders
NMC