AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8X-8011 BLADE GP S/N 1251-UP 12 FT PART OF 2C-9812 GENERAL AR 12H MOTOR GRADER


WORK TOOLS
BLADE GP
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOL
CHARTS & FILMS

MOTOR GRADER 12H MOTOR GRADER 125
 12H Motor Grader 12500001-UP (MACHINE) POWERED BY C-9 Engine SEBP3754 12H 125   (2003)

WORK TOOLS

BLADE GP
BLADE GP
3Q-9377 BLADE GP
BLADE GP
8X-8011 BLADE GP
BLADE GP
8X-8016 BLADE GP
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE
 

#SEBP37540470
 

8X-8011: BLADE GP

8X-8011 BLADE GP
S/N 1251-UP
12 FT
PART OF 2C-9812 GENERAL AR
i00124910 SEBP3754
8X8011 BLADE GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2768 [1] MOLDBOARD AS  
2. 112-1813 [1] RAIL-MOLDBOARD  
3. 4K-0367 [36] NUT-FULL (5/8-11-THD)  
4. 8E-5531 [2] BIT-END (MOLDBOARD)  
5. 9W-1767 [2] BIT-END (OVERLAY)  
6. 5D-9553 [2] EDGE-CUTTING  
7. 3F-5108 [26] BOLT-PLOW (5/8-11X2.25-IN)  
8. 4F-3657 [10] BOLT-PLOW (5/8-11X2.75-IN)  
 

#SEBP37540471
 

8X-8016: BLADE GP

8X-8016 BLADE GP
S/N 1251-UP
AN ATTACHMENT
i00654871 SEBP3754
8X8016 BLADE GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2761 [1] MOLDBOARD AS  
  112-1814 [2] RAIL-MOLDBOARD  
2. 5D-9554 [2] EDGE-CUTTING  
3. 3F-5108 [30] BOLT-PLOW (5/8-11X2.25-IN)  
4. 4K-0367 [40] NUT-FULL (5/8-11-THD)  
5. 8E-5531 [2] BIT-END (MOLDBOARD)  
6. 4F-3657 [10] BOLT-PLOW (5/8-11X2.75-IN)  
7. 9W-1767 [2] BIT-END (OVERLAY)  
 

#SEBP37540472
 

8X-1935: LIFT GP-BLADE

8X-1935 LIFT GP-BLADE
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i00124864 SEBP3754
8X1935 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
3. 7D-8891 [2] RETAINER  
4. 8X-3616 [1] ARM AS (RH)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 8D-8168 [1] BEARING (63.65-MM ID)  
7. 2J-3506 [6] NUT-FULL (3/4-10-THD)  
  3B-6753 [6] BOLT (3/4-10X4.75-IN)  
8. 5P-8248 [16] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 8X-5106 [1] STUD-BALL  
10. 8D-4332 [2] PIN  
11. 8X-5110 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
12. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
13. 8X-5109 [1] BAR AS  
14. 8X-5108 [2] BUSHING  
15. 124-5836 [5] BUSHING  
16. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
17. 9D-3583 [2] LOCK  
18. 7H-2444 [2] SEAL-O-RING  
19. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
20. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
21. 7D-8879 B [8] SHIM (0.127-MM THK)  
22. 7D-8881 B [6] SHIM (0.254-MM THK)  
23. 7D-8882 B [2] SHIM (0.508-MM THK)  
24. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
25. 5F-0149 [2] SEAL-O-RING  
26. 7D-8883 [2] SEAL  
27. 8X-5107 [1] PIN  
28. 3P-1461 [4] SEAL-LIP TYPE  
29. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
30. 8X-5111 [2] LOCK  
31. 7D-8884 [2] SEAL  
32. 8X-3615 [1] ARM AS (LH)  
  8D-8168 [1] BEARING (63.65-MM ID)  
  7D-8889 [1] BEARING (76.35-MM ID)  
33. 124-0435 [1] PLATE  
34. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
35. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)(.100 THK)  
  B   USE AS REQUIRED
 

#SEBP37540473
 

177-6821: MOUNTING GP-RIPPER

177-6821 MOUNTING GP-RIPPER
S/N 1251-UP
PART OF 175-2559 RIPPER AR
i01859858 SEBP3754
1776821 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)(47X80X20MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)(47X80X16MM THK)  
3. 6P-5647 [2] BOSS  
4. 8E-6130 [2] LINK AS  
    (EACH INCLUDES)
  2K-4233 [1] BOSS  
5. 104-4523 [2] CAM AS  
6. 177-6822 [1] PLATE AS  
7. 109-6776 [2] PIN  
8. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 7X-0292 [4] BOLT (3/8-16X4.5-IN)  
11. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
12. 7X-0403 [10] BOLT (1-8X2.25-IN)  
13. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
14. 9W-7469 [2] PIN  
15. 9W-7470 [2] PIN  
 

#SEBP37540474
 

175-2559: RIPPER AR

175-2559 RIPPER AR
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i01859839 SEBP3754
1752559 RIPPER AR Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-7024 Y [1] RIPPER GP (3 TEETH)  
2. 113-7754 Y [1] CYLINDER GP-RIPPER  
3. 174-2339 Y [1] LINES GP-RIPPER  
4. 177-6821 Y [1] MOUNTING GP-RIPPER  
   
  8T-4009 FY [1] PLATE & FILM GP  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540475
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 1251-UP
PART OF 175-2559 RIPPER AR
i01473105 SEBP3754
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
11. 187-0953 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37540476
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER
S/N 1251-UP
PART OF 8J-7024 RIPPER GP
ALSO AN ATTACHMENT
i00124786 SEBP3754
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 C [1] PIN  
3. 9J-6586 C [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER (PENETRATION)  
6. 114-0359 [1] RETAINER AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP37540477
 

4K-3330: TOOTH GP-SCARIFIER

4K-3330 TOOTH GP-SCARIFIER
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i00124622 SEBP3754
4K3330 TOOTH GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1459 [9] LOCK PIN  
2. 5K-1458 [9] GROMMET  
3. 195-7218 [9] SHANK  
4. 6Y-5230 [9] TOOTH-SCARIFIER  
  6B-3260 F [1] TOOL  
  F   NOT SHOWN
 

#SEBP37540478
 

2C-9690: BOX GP-TOOL

2C-9690 BOX GP-TOOL
S/N 1251-UP
PART OF 2C-9812 GENERAL AR
i00646757 SEBP3754
2C9690 BOX GP-TOOL Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-9681 [1] BOX AS-TOOL  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 5P-8502 [1] PADLOCK GP (TOOL BOX)  
  5P-8500 [1] KEY (TOOL BOX)  
  8Y-6364 [1] SLEEVE  
5. 6V-8801 [2] NUT (3/8-16-THD)  
 

#SEBP37540479
 

183-5805: FILM GP

183-5805 FILM GP
S/N 1251-UP
PART OF 207-9187 PLATE & FILM GP
i01874532 SEBP3754
1835805 FILM GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-3196 [2] FILM-STRIPE (12H)  
2. 184-5073 [2] FILM-STRIPE (CAT)  
3. 184-5076 [2] FILM-STRIPE  
4. 201-1055 [1] FILM-IDENTIFICATION (CATERPILLAR)  
5. 229-0119 E STRIPE (80CM EACH)  
  E   ORDER BY THE CENTIMETER
 

Information:

Operation and Maintenance Manual
Moldboard Wear Strip - Inspect/Adjust/Replace
12H Motor Grader
Moldboard Blade
12H Motor Grader
Special Instruction
Procedure to Mount the Blade Extension to the Moldboard Blade{6173}
Procedure to Mount the Blade Extension to the Moldboard Blade{6173}
Specifications
Blade Lift
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Systems Operation
Blade Cushion
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Disassembly and Assembly
Blade - Remove
12H, 140H and 160H Motor Graders Machine Systems
Blade - Install
12H, 140H and 160H Motor Graders Machine Systems
Blade Lift Arm - Remove
12H, 140H and 160H Motor Graders Machine Systems
Blade Lift Arm - Install
12H, 140H and 160H Motor Graders Machine Systems

Caterpillar Parts SIS Catalog 12H :

BLADE GP
3Q-9377 BLADE GP
BIT GP
107-3417 BIT GP
105-5180 BIT GP
WIPER GP-WINDOW
173-5320 WIPER GP-WINDOW
WIPER GP-WINDOW
172-6830 WIPER GP-WINDOW
177-8830 WIPER AR-WINDOW
WINDOW GP-VENT
126-0961 WINDOW GP-VENT
WINDOW GP-CAB
3Q-9241 WINDOW GP-CAB
BLADE GP
8X-8016 BLADE GP
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE
MOUNTING GP-RIPPER
177-6821 MOUNTING GP-RIPPER
RIPPER AR
175-2559 RIPPER AR
RIPPER GP
8J-7024 RIPPER GP
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
BOX GP-TOOL
2C-9690 BOX GP-TOOL

Truck sale:

Caterpillar 12H, Construction
115,000 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
116,500 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
87,000 
Caterpillar 12H, Construction
- motor graders
MADISA
Mexico
Caterpillar 12 H, Construction
106,008 
Caterpillar 12 H, Construction
- motor graders
TRACTAFRIC EQUIPMENT
Netherlands
Caterpillar 12H, Construction
90,000 
Caterpillar 12H, Construction
- motor graders
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.