BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
PAN GP-OIL
GEAR GP
GUARD GP-BELT
HOUSING GP-FLYWHEEL
GEAR GP
BASIC ENGINE
CYLINDER BLOCK GP#SEBP37570010
287-2416: CYLINDER BLOCK GP
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-7525 | [1] | PLUG | |
| 2. | 096-3741 | [4] | CAP | |
| 3. | 099-4420 | [2] | PIN | |
| 4. | 314-9938 | [1] | BUSHING | |
| 5. | 233-5488 | [2] | PIN | |
| 6. | 103-9703 | [1] | SHAFT-IDLER | |
| 7. | 183-5916 | [6] | PIN-SPRING | |
| 8. | 104-1218 | [2] | DOWEL | |
| 9. | 233-5457 | [4] | ORIFICE-JET (OIL PISTON COOLING) | |
| 10. | 327-7701 C | [1] | CRANKCASE AS | |
| 11. | 310-2682 | [2] | PLUG | |
| 12. | 103-9279 | [2] | SEAL-SIDE | |
| 13. | 3P-1896 | [10] | PLUG-CUP | |
| 14. | 103-9276 | [10] | BOLT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP37570011
233-5500: CYLINDER HEAD GP
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-5454 | [17] | BOLT (M12X1.75X115-MM) | |
| 2. | 299-4645 | [1] | GASKET-HEAD | |
| 3. | 233-5465 | [1] | HEAD AS | |
| 3A. | 257-8736 | [12] | CAP-SEALING | |
| 3B. | 212-8475 | [7] | CAP | |
| 3C. | [1] | CYLINDER HEAD | ||
| 3D. | 233-5462 | [4] | INSERT-INLET | |
| 3E. | 233-5463 | [4] | INSERT-VALVE SEAT (EXHAUST) | |
| 3F. | 233-5464 | [8] | GUIDE | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP37570012
233-5500: CYLINDER HEAD GP
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS#SEBP37570013
237-8070: DRAIN GP-ENGINE OIL
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-1026 | [1] | CLAMP-BAND | |
| 2. | 6V-7238 | [1] | VALVE-SHUTOFF | |
| 3. | 237-8058 | [1] | ELBOW | |
| 4. | 125-2976 M | [1] | NUT (M14X1.5-THD) | |
| 5. | 3K-0360 | [1] | SEAL-O-RING | |
| 6. | 7X-0510 | [1] | WASHER-HARD (15.5X29X3-MM THK) | |
| 7. | 9X-7382 | [1] | SEAL-O-RING | |
| 8. | 5P-0743 E | HOSE (22-CM) | ||
| (FOR USE WITH CWL 908 MODEL) | ||||
| -OR- | ||||
| 8A. | 5P-0743 E | HOSE (10-CM) | ||
| (FOR USE WITH CWL 906 MODEL) | ||||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP37570014
287-4830: GEAR GP-FRONT
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-4936 M | [1] | BOLT (M10X1.25X20-MM) | |
| 2. | 222-8202 | [1] | PLATE | |
| 3. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 117-2827 | [1] | GEAR (46-TEETH) | |
| 5. | 117-2829 | [1] | GEAR (23-TEETH) | |
| 6. | 117-3283 | [1] | GEAR AS-IDLER (49-TEETH) | |
| 7. | 117-3285 | [1] | GEAR-PUMP (OIL, 31-TEETH) | |
| 8. | 239-4292 | [1] | GEAR | |
| M | METRIC PART | |||
#SEBP37570015
230-5718: GUARD GP-BELT
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 232-0203 | [1] | GUARD-BELT | |
| 2. | 232-0480 | [1] | BRACKET AS | |
| 3. | 236-5756 | [1] | BRACKET AS | |
| 4. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 5. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 6. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 7. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP37570016
323-5768: GUARD GP-BELT
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [12] | STRAP-CABLE | |
| 2. | 8T-8737 | [2] | PLUG-SEAL | |
| 3. | 8T-8799 | [2] | BOOT (RED)(RED) | |
| 4. | 115-1615 | [1] | RELAY AS (12-VOLT) | |
| 5. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 6. | 205-6455 | [1] | SPACER (10X16X20-MM THK) | |
| 7. | 279-1124 | [4] | GROMMET | |
| 8. | 311-6321 | [1] | BRACKET | |
| 9. | 323-5862 | [1] | HARNESS AS-ENGINE | |
| 10. | 326-9025 | [1] | GUARD-BELT | |
| 11. | 330-3667 | [1] | BRACKET AS | |
| 12. | 165-9104 | [4] | SPACER (6.5X9.5X10-MM THK) | |
| 13. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 4P-7581 | [2] | CLIP (LADDER) | |
| 15. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 16. | 5P-4115 | [7] | WASHER-HARD (7.2X19X2-MM THK) | |
| 17. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 18. | 6V-8231 M | [1] | NUT (M10X1.25-THD) | |
| 19. | 7C-6921 | [1] | SPACER (11X20X22.8-MM THK) | |
| 20. | 7X-2535 M | [1] | BOLT (M6X1X60-MM) | |
| 21. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 24. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 27. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 28. | 9X-8250 | [2] | CLIP | |
| M | METRIC PART | |||
#SEBP37570017
301-3288: HOUSING GP-FLYWHEEL
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-7628 | [2] | GASKET | |
| 2. | 5I-8056 | [2] | PLUG | |
| 3. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 4. | 117-5015 | [1] | SEAL AS-OIL | |
| 5. | 140-5217 M | [10] | BOLT (M10X1.25X25-MM) | |
| 6. | 212-8499 | [3] | STUD | |
| 7. | 212-8510 M | [3] | NUT (M10X1.25-THD) | |
| 8. | 317-7796 | [1] | HOUSING-FLYWHEEL | |
| 9. | 103-9280 | [1] | GASKET-REAR | |
| 10. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| M | METRIC PART | |||
#SEBP37570018
316-1621: HOUSING GP-FLYWHEEL
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-7628 | [1] | GASKET | |
| 2. | 5I-8056 | [1] | PLUG | |
| 3. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 4. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 103-9280 | [1] | GASKET-REAR | |
| 6. | 117-5015 | [1] | SEAL AS-OIL | |
| 7. | 195-8483 M | [10] | BOLT (M10X1.25X25-MM) | |
| 8. | 212-8499 | [3] | STUD | |
| 9. | 212-8510 M | [3] | NUT (M10X1.25-THD) | |
| 10. | 526-1947 | [1] | HOUSING-FLYWHEEL | |
| 11. | 316-1552 | [1] | PLUG | |
| M | METRIC PART | |||
#SEBP37570019
246-1257: HOUSING GP-FRONT
Parts for your 908 COMPACT WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-5010 | [5] | BOLT (M8X1.25X65-MM) | |
| 2. | 6V-5215 M | [5] | BOLT (M8X1.25X16-MM) | |
| 3. | 8T-0642 M | [2] | BOLT (M8X1.25X14-MM) | |
| 4. | 8T-7329 M | [13] | BOLT (M8X1.25X55-MM) | |
| 5. | 9M-1974 | [25] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 096-9529 | [1] | SEAL-O-RING | |
| 7. | 117-3447 | [1] | GASKET (GEAR CASE) | |
| 8. | 117-3448 | [1] | PLATE (FRONT) | |
| 9. | 223-0203 | [1] | COVER | |
| 10. | 223-0204 | [1] | GASKET | |
| 11. | 103-9277 | [1] | GASKET-FRONT PLATE | |
| 12. | 246-1258 | [1] | COVER-GEAR (TIMING) | |
| 13. | 246-1260 | [1] | COVER-INSULATION | |
| 14. | 239-8429 | [1] | SEAL-CRANKSHAFT | |
| 15. | 238-8279 | [1] | HOUSING-FRONT | |
| 16. | 246-1259 | [1] | COVER-INSULATION | |
| 17. | 6V-8837 M | [4] | BOLT (M6X1X16-MM) | |
| 18. | 282-0992 | [2] | BOLT | |
| 19. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 20. | 096-2500 | [2] | LOCKWASHER | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Crankshaft Main Bearings - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines
3044C Industrial Engine and Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines
3044C Industrial Engine and Engines for Caterpillar Built Machines
Caterpillar Parts SIS Catalog 908 :
Truck sale:
100,940
Caterpillar 908M, Wheel Loaders, Construction
- Wheel Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
- Wheel Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
123,600
Caterpillar 908M, Wheel Loaders, Construction
- Wheel Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
- Wheel Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC


