218-0930 LINES GP-FUEL PRM &amp; FILTER S/N SCP1-657; PDT1-934 PART OF 218-5810 CHASSIS AR 236B SKID STEER LOADER

LINES GP-FUEL PRM & FILTER

Pos.	Part No	Qty	Parts name
1.	1P-4278	[12]	CLAMP-HOSE
2.	3E-7404	[1]	CLAMP-HOSE
3.	9X-2038	[2]	WASHER (7X19X2-MM THK)
4.	033-7849	[2]	PLUG
5.	069-4080	[1]	FITTING
6.	142-8827	[1]	GUARD AS
7.	142-8828	[1]	CAP AS-FILLER (FUEL)
8.	151-1975	[2]	CONNECTOR
9.	191-9776	[1]	HOSE
10.	222-3518	[1]	TEE
11.	232-5877 Y	[1]	FILTER GP-WATER SEP & FUEL (ELECTRIC PRIMING)
12.	232-6142	[1]	BRACKET AS
13.	242-6055	[1]	HOSE
14.	032-8100	[2]	WASHER (0.531X0.718X0.064-IN THK)
15.	4B-9302	[2]	CLIP (LOOP)
16.	4D-6466	[4]	CLIP
17.	5C-7261 M	[2]	NUT (M8X1.25-THD)
18.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
19.	5P-0597	[1]	CLAMP-HOSE
20.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
21.	5P-7814	[2]	SEAL-O-RING
22.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4133 M	[2]	NUT (M10X1.5-THD)
24.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
25.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
26.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
27.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
28.	8C-6959 E		HOSE (22CM)
29.	5P-1442 E		HOSE (128CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37690121

218-0930: LINES GP-FUEL PRM & FILTER

218-0930 LINES GP-FUEL PRM & FILTER
S/N SCP658-4599; PDT935-99999
PART OF 218-5810 CHASSIS AR

i02242760 SEBP3769

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	1P-4278	[11]	CLAMP-HOSE
2.	3E-7404	[1]	CLAMP-HOSE
3.	9X-2038	[2]	WASHER (7X19X2-MM THK)
4.	3K-8460	[2]	PLUG (1/2-20-THD)
5.	069-4080	[1]	FITTING
6.	252-0368	[1]	GUARD AS (FUEL FILLER)
	6W-5698	[1]	GROMMET
	142-8928	[1]	ELBOW
7.	142-8828	[1]	CAP AS-FILLER (FUEL)
8.	151-1975	[2]	CONNECTOR
9.	191-9776	[1]	HOSE
10.	256-2155 C	[1]	TEE
11.	232-5877 Y	[1]	FILTER GP-WATER SEP & FUEL (ELECTRIC PRIMING)
12.	232-6142	[1]	BRACKET AS
13.	242-6055	[1]	HOSE
14.	5P-1442 E		HOSE (128-CM)
15.	4B-9302	[2]	CLIP (LOOP)
16.	4D-6466	[4]	CLIP
17.	5C-7261 M	[1]	NUT (M8X1.25-THD)
18.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
19.	180-3007 C	[1]	CLAMP-HOSE
20.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
21.	5P-7814	[4]	SEAL-O-RING
22.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4133 M	[2]	NUT (M10X1.5-THD)
24.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
25.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
26.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
27.	8T-7547 M	[1]	BOLT (M8X1.25X30-MM)
28.	8C-6959 E		HOSE (22-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP37690122

235-5902: PUMP GP-FUEL INJECTION

235-5902 PUMP GP-FUEL INJECTION
S/N CJS1-UP
PART OF 179-1854 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT

i01941336 SEBP3769

2355902 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	5J-3886	[1]	SEAL-O-RING
2.	5P-7970 M	[2]	NUT (M8X1.25-THD)
3.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
7.	212-8510 M	[1]	NUT (M10X1.25-THD)
8.	225-5243	[1]	GASKET
9.	225-5244	[1]	FLANGE
10.	234-4836	[1]	BRACKET
11.	234-4835	[2]	STUD
12.	235-4969	[1]	BRACKET
13.	235-4970	[1]	BOLT
14.	246-8310	[1]	PUMP AS-FUEL INJECTION
14A.	237-5396	[1]	SOLENOID AS (FUEL SHUTOFF)
15.	294-5060	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	226-5662	[1]	KIT-COVER (IDLE)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	226-5663	[1]	KIT-COVER (FUEL)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	258-7493	[1]	KIT-INSULATION
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37690123

235-5902: PUMP GP-FUEL INJECTION

235-5902 PUMP GP-FUEL INJECTION
S/N CJS1-UP
PART OF 179-1854 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT

i02724842 SEBP3769

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	300-3988 C	[1]	SEAL-O-RING
2.	178-3336 CM	[1]	NUT-HEX FLANGE (M8X1.25-THD)
3.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
5.	300-3867 C	[1]	WASHER
6.	199-2354 C	[1]	BOLT (M10X1.25X25-MM)
	140-5217 M	[1]	BOLT (M10X1.25X25-MM)
6A.	7X-0796	[1]	LOCKWASHER (10.2X18.4X2.5-MM THK)
7.	212-8510 M	[1]	NUT (M10X1.25-THD)
9.	306-2165	[1]	FLANGE-PUMP
10.	234-4836	[1]	BRACKET
11.	234-4835 C	[1]	STUD
12.	246-8307 C	[1]	BRACKET-INJECTION PUMP
13.	235-4970	[1]	BOLT
14.	246-8310	[1]	PUMP AS-FUEL INJECTION
14A.	237-5396	[1]	SOLENOID AS (FUEL SHUTOFF)
15.	294-5060	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	226-5662	[1]	KIT-COVER (IDLE)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	226-5663	[1]	KIT-COVER (FUEL)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	258-7493	[1]	KIT-INSULATION
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37690124

249-7347: PUMP GP-FUEL INJECTION

249-7347 PUMP GP-FUEL INJECTION
S/N CJS1-UP
PART OF 179-1853 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT

i02177682 SEBP3769

2497347 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	5J-3886	[1]	SEAL-O-RING
2.	5P-7970 M	[1]	NUT (M8X1.25-THD)
3.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
7.	212-8510 M	[1]	NUT (M10X1.25-THD)
8.	8C-3080	[1]	SEAL-O-RING
9.	225-5244	[1]	FLANGE
10.	234-4836	[1]	BRACKET
11.	234-4835	[1]	STUD
12.	246-8307	[1]	BRACKET-INJECTION PUMP
13.	235-4970	[1]	BOLT
14.	249-7346	[1]	PUMP AS

			AVAILABLE REPAIR KIT(S):
	226-5662	[1]	KIT-COVER (IDLE)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	226-5663	[1]	KIT-COVER (FUEL)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	258-7493	[1]	KIT-INSULATION
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	M		METRIC PART

#SEBP37690125

249-7347: PUMP GP-FUEL INJECTION

249-7347 PUMP GP-FUEL INJECTION
S/N CJS1-UP
PART OF 179-1853 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT

i02525864 SEBP3769

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	5J-3886	[1]	SEAL-O-RING
2.	5P-7970 M	[1]	NUT (M8X1.25-THD)
3.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
7.	212-8510 M	[1]	NUT (M10X1.25-THD)
8.	8C-3080	[1]	SEAL-O-RING
9.	306-2165	[1]	FLANGE-PUMP
10.	234-4836	[1]	BRACKET
11.	234-4835	[1]	STUD
12.	235-4969 C	[1]	BRACKET
13.	235-4970	[1]	BOLT
14.	249-7346	[1]	PUMP AS
14A.	237-5396	[1]	SOLENOID AS (FUEL SHUTOFF)

			AVAILABLE REPAIR KIT(S):
	226-5662	[1]	KIT-COVER (IDLE)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	226-5663	[1]	KIT-COVER (FUEL)
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	258-7493	[1]	KIT-INSULATION
			(DO NOT ADJUST EMISSIONS, USE OF THIS KIT IS SUBJECT TO EPA REGULATIONS. KIT IS INTENDED FOR USE BY INTERNAL CATERPILLAR
			QUALIFIED MECHANICS.)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP37690126

105-2814: ALTERNATOR GP-CHARGING

105-2814 ALTERNATOR GP-CHARGING
S/N CJS1-UP
12 VOLT, 90 AMPERE
PART OF 287-6361 ALTERNATOR GP-CHARGING
AN ATTACHMENT

i00197967 SEBP3769

1052814 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	113-4458	[1]	PULLEY-ALTERNATOR (M14X1.5-THD)(2-GROOVE)
2.	113-4459	[1]	FRAME AS-ALTERNATOR
3.	113-4460	[1]	ROTOR AS-ALTERNATOR
4.	113-4461	[1]	FRAME AS-ALTERNATOR
5.	113-4462	[1]	REGULATOR AS-ALTERNATOR
6.	113-4463	[1]	RECTIFIER AS-ALTERNATOR
7.	113-4464	[1]	COVER-ALTERNATOR
8.	113-4469	[4]	BUSHING-ALTERNATOR
9.	113-4470	[1]	BUSHING-ALTERNATOR
10.	5C-2890 M	[1]	NUT (M6X1-THD)
11.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	1H-3244	[1]	LOCKWASHER

			AVAILABLE REPAIR KIT(S):
	113-4465	[1]	KIT-ALTERNATOR BEARING
			(INCLUDES COVERS, BEARINGS & WASHERS)
	113-4466	[1]	KIT-REPAIR (ALTERNATOR BRUSHES)
			(INCLUDES HOLDER ASSEMBLY & SEALS)
	113-4467	[1]	KIT-ALTERNATOR TERMINAL
			(INCLUDES SCREWS, PLATE & NUTS)
	113-4468	[1]	KIT-ALTERNATOR HARDWARE
			(INCLUDES SCREWS)
	M		METRIC PART

#SEBP37690127

235-5905: ALTERNATOR GP-CHARGING

235-5905 ALTERNATOR GP-CHARGING
S/N CJS1-UP
PART OF 179-1853, 179-1854 ENGINE AR-PRIMARY
AN ATTACHMENT

i01941340 SEBP3769

2355905 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
3.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
4.	235-4962	[1]	PLATE
5.	235-4973	[1]	BOLT (M10X1.5X90-MM)
6.	239-0771	[1]	BRACKET
7.	239-0772	[1]	ALTERNATOR GP-CHARGING
	M		METRIC PART

#SEBP37690128

287-6361: ALTERNATOR GP-CHARGING

287-6361 ALTERNATOR GP-CHARGING
S/N CJS31383-39241
PART OF 179-1853, 179-1854 ENGINE AR-PRIMARY
AN ATTACHMENT

i02814901 SEBP3769

2876361 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 236B SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
2.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
4.	235-4962	[1]	PLATE
5.	235-4973	[1]	BOLT (M10X1.5X90-MM)
6.	294-7916 C	[1]	BRACKET
7.	105-2814 Y	[1]	ALTERNATOR GP-CHARGING
8.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
9.	3B-4505	[2]	LOCKWASHER
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP37690129

287-6361: ALTERNATOR GP-CHARGING

287-6361 ALTERNATOR GP-CHARGING
S/N CJS1-31382
PART OF 179-1853 ENGINE AR-PRIMARY
AN ATTACHMENT

i02568570 SEBP3769

For full view, you need register

Parts for your 236B SKID STEER LOADER: