225-7948 WIRING GP-AIR CONDITIONER S/N MJH1-10574; BXM1-4224 PART OF 218-6273, 218-6302 AIR CONDITIONER AR AN ATTACHMENT 242B

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 225-7948 WIRING GP-
1. 225-8001 WIRING GP-

SWITCH GP

2. 225-8010 WIRING GP-
3. 225-8010 WIRING GP-

HORN GP-ELECTRIC

4. 230-3743 WIRING GP-

WIRING GP

5. 272-1625 WIRING GP-
6. 272-1625 WIRING GP-

LIGHTING GP

7. 225-7964 WIRING GP-

WIRING GP

8. 216-4724 WIRING GP-
9. 225-7960 WIRING GP-
0. INFORMATION

SKID STEER LOADER 242B SKID STEER LOADER BXM
216B 226B 232B 242B Skid Steer Loader BXM00001-04224 (MACHINE) POWERED BY 3024C Engine SEBP3770 242B BXM (2003)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

218-6742 KIT-WORK TOOL WIRING

247-0323 SWITCH GP-PRESS & TEMP

225-7948 WIRING GP-AIR CONDITIONER

225-8001 WIRING GP-CHASSIS

225-8010 WIRING GP-ENGINE

#SEBP37700250

225-7948: WIRING GP-AIR CONDITIONER

WIRING GP-AIR CONDITIONER

225-7948 WIRING GP-AIR CONDITIONER
S/N MJH1-10574; BXM1-4224
PART OF 218-6273, 218-6302 AIR CONDITIONER AR
AN ATTACHMENT

i01955354 SEBP3770

2257948 WIRING GP-AIR CONDITIONER Parts scheme

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	202-2168	[1]	HARNESS AS-FUEL TANK
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	221-3879	[1]	HARNESS AS-HEATER & AIR COND
	124-5640	[2]	TERMINAL-SOCKET
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	100-6674	[2]	SEAL-CONNECTOR
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	E		ORDER BY THE CENTIMETER

#SEBP37700251

225-8001: WIRING GP-CHASSIS

WIRING GP-CHASSIS

225-8001 WIRING GP-CHASSIS
S/N MJH1-10574; SCH1-2474; RLL1-6799; BXM1-4224
PART OF 218-5910, 218-6610 CHASSIS AR

i01955454 SEBP3770

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
2.	6I-1418	[6]	SPACER (8.2X12.7X28.7-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	8M-4963	[1]	STRAP AS-GROUND
5.	8T-8799	[2]	BOOT (RED)
6.	8T-9655	[12]	MOUNT-ISOLATION
7.	9X-2092 E		TRIM-EDGE (50-CM)
8.	090-9434	[3]	SPACER (9X20X10-MM THK)
9.	114-4516	[1]	BLOCK
10.	115-1615	[3]	RELAY AS (12-VOLT)(MAIN POWER)
11.	154-4233 Y	[1]	CONTROL GP-INTERLOCK
12.	3S-2093	[34]	STRAP-CABLE
13.	178-7539	[1]	RECEPTACLE AS (POWER SUPPLY)
14.	216-4703	[1]	HARNESS AS-REAR LIGHTING
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[1]	PLUG-SEAL
	186-3736	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
15.	216-4755 Y	[1]	COVER GP-FUSE PANEL
16.	221-3880	[1]	PANEL GP-FUSE
	124-3548	[1]	FUSE (30-AMPERE)
	113-8490	[16]	FUSE (10-AMPERE)
	113-8491	[5]	FUSE (15-AMPERE)
	113-8492	[2]	FUSE (20-AMPERE)
17.	225-5190	[1]	BRACKET AS
18.	225-7981	[1]	BRACKET AS
19.	225-7982	[1]	WIRE AS
20.	225-8000 Y	[1]	ELECTRONICS GP-IMPLEMENT (WORK TOOL)
21.	225-8002	[1]	HARNESS AS-PLATFORM (LOWER)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[2]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	7T-0093	[4]	PIN-CONNECTOR (12-GA TO 14-GA)
	8T-8737	[16]	PLUG-SEAL
	196-2412	[16]	TERMINAL AS (16-GA)
			(EACH INCLUDES)
	7R-2750	[1]	SEAL-CONNECTOR
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	7R-2750	[16]	SEAL-CONNECTOR
	7R-2751	[1]	PLUG-CONNECTOR (1-PIN)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
	128-4123	[7]	SEAL-CABLE
	150-6764	[1]	PLUG AS-CONNECTOR (26-PIN)
	150-6765	[1]	PLUG AS-CONNECTOR (26-PIN)
			(EACH PLUG AS INCLUDES)
	159-9322	[1]	SEAL-O-RING
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	177-9653	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	196-2381	[1]	KIT-CONNECTING PLUG (2-PIN)
	196-2382	[1]	KIT-CONNECTING PLUG (2-PIN)
	196-2383	[1]	KIT-CONNECTING PLUG (8-PIN)
	196-2384	[1]	KIT-CONNECTING PLUG (8-PIN)
	196-2385	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, LOCK, TERMINAL AS & INTERFACE SEAL)
	8L-8413	[7]	STRAP-CABLE (WHITE)
	173-8919	[4]	SEAL-CONNECTOR
	167-3692	[1]	RECEPTACLE AS-CONNECTOR (31-PIN)
	9X-3401	[44]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[44]	PIN-CONNECTOR (14-GA TO 16-GA)
22.	292-1159	[1]	HARNESS AS-PLATFORM (UPPER)
	128-4170	[2]	TERMINAL AS
			(EACH INCLUDES)
	6H-3587	[1]	TERMINAL-RING (6-GA TO 8-GA, 3/8-IN SCREW)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8079	[3]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	9X-1055	[8]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[8]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[11]	PLUG-SEAL
	180-9340	[54]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	186-3736	[52]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[18]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	305-5362	[2]	TERMINAL AS (18-GA)
	186-3735	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[28]	STRAP-CABLE (WHITE)
	9X-1054	[4]	PLUG AS-CONNECTOR (4-PIN)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	126-5011	[1]	SEAL-CONNECTOR
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
	177-9656	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	211-5358 E		CONDUIT-FLEXIBLE (30-CM)
	213-0139	[6]	PIN (4-MM)
	167-3693	[2]	PLUG AS-CONNECTOR (31-PIN)
23.	8T-0389 M	[1]	LOCKNUT (M10X1.5-THD)
24.	095-0733 M	[2]	SCREW-MACHINE (M4X0.7X40-MM)
25.	155-2255 B	[1]	KIT-CONNECTING PLUG (12-PIN)
26.	155-2271 B	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
27.	102-8802 B	[2]	KIT-RECEPTACLE (2-PIN)
28.	102-8803 B	[1]	KIT-RECEPTACLE (3-PIN)
29.	102-8804 B	[3]	KIT-RECEPTACLE (4-PIN)
30.	102-8806 B	[1]	KIT-RECEPTACLE (8-PIN)
31.	177-9645 B	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
32.	4P-7581	[3]	CLIP (LADDER)
33.	4P-8134	[5]	CLIP (LADDER)
34.	246-9371	[1]	COVER-RELAY
35.	5C-7261 M	[3]	NUT (M8X1.25-THD)
36.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
37.	6V-5698 M	[2]	SCREW-BUTTON HEAD (M4X0.7X10-MM)
38.	7X-0579	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
39.	7X-0818 M	[6]	BOLT (M8X1.25X45-MM)
40.	111-0910	[2]	SCREW-PAN HEAD (4-40X0.25-IN)
41.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
42.	8T-4133 M	[3]	NUT (M10X1.5-THD)
43.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
44.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
45.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
46.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
49.	8T-8737 B	[45]	PLUG-SEAL
50.	178-3620	[4]	STRAP-DUAL CLAMP
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP37700252

225-8010: WIRING GP-ENGINE

WIRING GP-ENGINE

225-8010 WIRING GP-ENGINE
S/N MJH1-3321; SCH1-958; RLL1-1768; BXM1-1353
PART OF 218-0911, 228-1767 INSTALLATION AR-ENGINE

i01988420 SEBP3770

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
2.	5L-4507	[2]	SCREW-MACHINE (10-32X0.875-IN)
3.	7G-1060	[1]	STRAP AS-GROUND
4.	8F-1434	[2]	LOCKWASHER
5.	090-9434	[3]	SPACER (9X20X10-MM THK)
6.	115-1615	[2]	RELAY AS (12-VOLT)(COLD START)
6A.	115-1615	[2]	RELAY AS (12-VOLT)(START)
8.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR AIR)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	225-7954	[1]	CABLE AS-BATTERY (POSITIVE)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(36-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
10.	225-7980	[1]	BRACKET AS
12.	225-8011	[1]	HARNESS AS-ENGINE
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[9]	STRAP-CABLE (WHITE)
	8T-8737	[1]	PLUG-SEAL
	8T-8799	[2]	BOOT (RED)
	9X-1054	[2]	PLUG AS-CONNECTOR (4-PIN)
	9X-1055	[4]	TERMINAL-RECEPTACLE (12-GA)
	100-3320	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	126-5011	[1]	SEAL-CONNECTOR
	100-5041	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	305-5362	[6]	TERMINAL AS (18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	5P-5618	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
	7N-9017	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
		[1]	TERMINAL AS
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	194-5226	[6]	WIRE AS (16-GA)
			-OR-
	194-5227	[6]	WIRE AS (14-GA)
13.	238-9397	[1]	RESISTOR AS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	172-9200	[1]	SUPPRESSOR-ARC
15.	1H-3244	[1]	LOCKWASHER
16.	3S-2093	[8]	STRAP-CABLE
17.	4P-8134	[1]	CLIP (LADDER)
18.	5C-2874 M	[1]	NUT (M5X0.8-THD)
19.	5C-2890 M	[1]	NUT (M6X1-THD)
20.	5C-7261 M	[4]	NUT (M8X1.25-THD)
21.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
22.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
23.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4133 M	[1]	NUT (M10X1.5-THD)
25.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
26.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
27.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)

			(REFER ALTERNATOR GP-CHARGING 246-4319 & 247-9912 FOR "CABLE AS-BATTERY (NEGATIVE)")
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37700253

225-8010: WIRING GP-ENGINE

WIRING GP-ENGINE

225-8010 WIRING GP-ENGINE
S/N MJH3322-10574; SCH959-2474; RLL1769-6799; BXM1354-4224
PART OF 218-0911, 228-1767, 278-1218, 278-1228 INSTALLATION AR-ENGINE

i02337433 SEBP3770

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
2.	5L-4507	[2]	SCREW-MACHINE (10-32X0.875-IN)
3.	7G-1060	[1]	STRAP AS-GROUND
4.	8F-1434	[2]	LOCKWASHER
5.	090-9434	[3]	SPACER (9X20X10-MM THK)
6.	115-1615	[1]	RELAY AS (12-VOLT)(COLD START)
6A.	115-1615	[1]	RELAY AS (12-VOLT)(START)
7.	189-3158 C	[1]	SUPPRESSOR-ARC
8.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	225-7954	[1]	CABLE AS-BATTERY (POSITIVE)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	159-8049 E		CABLE (00-GA, RED)(36-CM)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
10.	225-7980	[1]	BRACKET AS
11.	270-2702 C	[1]	HARNESS AS-ENGINE
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	194-5226	[4]	WIRE AS (16-GA)
			-OR-
	194-5227	[4]	WIRE AS (14-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7K-1181	[2]	STRAP-CABLE
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	264-8106	[1]	HARNESS AS-ENGINE (MAIN)
	5P-5618	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
		[1]	TERMINAL AS
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	8L-8413	[7]	STRAP-CABLE (WHITE)
	128-4190	[1]	TERMINAL AS
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[1]	PLUG-SEAL
	8T-8799	[2]	BOOT (RED)
	9X-1054	[2]	PLUG AS-CONNECTOR (4-PIN)
	9X-1055	[4]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	7N-9017	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	194-5226	[5]	WIRE AS (16-GA)
			-OR-
	194-5227	[5]	WIRE AS (14-GA)
	211-5358 E		CONDUIT-FLEXIBLE (32-CM)
13.	238-9397	[1]	RESISTOR AS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	172-9200	[1]	SUPPRESSOR-ARC
15.	1H-3244	[1]	LOCKWASHER
16.	3S-2093 C	[10]	STRAP-CABLE
17.	4P-8134	[1]	CLIP (LADDER)
18.	5C-2874 M	[2]	NUT (M5X0.8-THD)
19.	5C-2890 M	[1]	NUT (M6X1-THD)
20.	5C-7261 M	[4]	NUT (M8X1.25-THD)
21.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
22.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
23.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4133 M	[1]	NUT (M10X1.5-THD)
25.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
26.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
27.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
29.	7K-1181	[1]	STRAP-CABLE
30.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
31.	104-6202	[1]	CLIP (LADDER)
32.	141-5453 M	[1]	BOLT (M14X1.5X30-MM)

			(REFER ALTERNATOR GP-CHARGING 246-4319 & 247-9912 FOR "CABLE AS-BATTERY (NEGATIVE)")
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37700254

230-3743: WIRING GP-HORN

WIRING GP-HORN

230-3743 WIRING GP-HORN -WITH MOUNTING
S/N MJH1-10574; SCH1-2474; RLL1-6799; BXM1-4224
PART OF 261-6155, 261-6156, 261-6157, 261-6158, 261-6187, 261-6197, 278-1212, 278-1213, 278-1220, 278-1221, 278-1224, 278-1225, 278-5347, 278-5348, 278-5369, 278-5370, 278-5408, 278-5409, 278-5413, 278-5414, 278-5441, 278-5442, 340-7714, 340-7715, 340-7717 CONVERSION AR-MACHINE, 233-5671, 233-5672, 233-5673, 233-5674, 233-5675, 233-5676, 233-5681, 233-5682, 233-5683, 233-5684, 233-5685, 233-5686, 257-5716, 257-5717, 257-5718, 257-5721, 257-5722, 257-5723 CONVERSION AR-ROADING
AN ATTACHMENT

i01951899 SEBP3770

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
3.	142-8833	[1]	SPACER (11X14.3X9-MM THK)
4.	8T-4133 M	[1]	NUT (M10X1.5-THD)
5.	186-3362	[1]	HARNESS AS-CHASSIS (HORN)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART

#SEBP37700255

272-1625: WIRING GP-MACHINE

WIRING GP-MACHINE

272-1625 WIRING GP-MACHINE -DEMAND FAN
S/N MJH1-10574; BXM1-4224
STAGE II SOUND
PART OF 261-6157, 261-6158, 261-6187, 261-6197, 278-1212, 278-1213, 278-1220, 278-1221, 278-1224, 278-1225, 278-5408, 278-5409, 278-5441, 278-5442, 340-7715, 340-7717 CONVERSION AR-MACHINE, 257-5717, 257-5721, 257-5722, 257-5723 CONVERSION AR-ROADING
Type 1
AN ATTACHMENT

i02430223 SEBP3770

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[10]	STRAP-CABLE
2.	8T-8737	[5]	PLUG-SEAL
3.	206-2423	[8]	SADDLE-MOUNTING
4.	270-1629	[1]	CONTROL GP-FAN
5.	272-1626	[1]	HARNESS AS-SWITCH (DEMAND FAN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[10]	STRAP-CABLE (WHITE)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	8T-8737	[7]	PLUG-SEAL
	253-8110	[1]	PLUG (12-PIN)
6.	278-1061	[1]	BRACKET AS
7.	205-7048 M	[3]	INSERT-THREADED (M6X1-X14.73-MM)
8.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
9.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
10.	3S-2093	[19]	STRAP-CABLE
11.	4P-8134	[1]	CLIP (LADDER)(LADDER)
12.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
13.	8T-4205	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
14.	8T-4971 M	[2]	BOLT (M6X1X30-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37700256

272-1625: WIRING GP-MACHINE

WIRING GP-MACHINE

i02639958 SEBP3770

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[10]	STRAP-CABLE
2.	8T-8737	[5]	PLUG-SEAL
3.	206-2423	[8]	SADDLE-MOUNTING
4.	292-9624 C	[1]	CONTROL GP-FAN
5.	272-1626	[1]	HARNESS AS-SWITCH (DEMAND FAN)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	253-8110	[1]	PLUG (12-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	8T-8737	[7]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	180-9340	[19]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
6.	278-1061	[1]	BRACKET AS
7.	205-7048 M	[3]	INSERT-THREADED (M6X1-X14.73-MM)
8.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
9.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
10.	3S-2093	[19]	STRAP-CABLE
11.	4P-8134	[1]	CLIP (LADDER)
12.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
13.	8T-4205	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
14.	8T-4971 M	[2]	BOLT (M6X1X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37700257

225-7964: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

225-7964 WIRING GP-REAR LIGHTING
S/N MJH1-10574; SCH1-2474; RLL1-6799; BXM1-4224
PART OF 278-1212, 278-1213, 278-5369, 278-5370, 278-5408, 278-5409 CONVERSION AR-MACHINE, 233-5673, 233-5676, 233-5683, 233-5686 CONVERSION AR-ROADING
AN ATTACHMENT

i01951895 SEBP3770

2257964 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-1615	[1]	RELAY AS (12-VOLT)(BRAKE LIGHT)
2.	166-2033	[2]	TEE AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	7X-2444	[1]	TEE-SWIVEL
3.	184-1564 Y	[2]	SWITCH GP-PRESSURE (BRAKE LIGHT)
4.	216-4711	[1]	HARNESS AS-REAR LIGHTING (BRAKE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	100-5041	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	3S-2093 B	[4]	STRAP-CABLE
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP37700258

216-4724: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

216-4724 WIRING GP-WORK TOOL -VERTICAL LIFT
S/N SCH1-2474; BXM1-4224
PART OF 218-5947 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT

i01937702 SEBP3770

2164724 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
2.	115-1615	[1]	RELAY AS (12-VOLT)(MAIN POWER)
3.	142-8633	[1]	SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)
	111-7899	[1]	GASKET
4.	146-9439	[1]	RELAY AS (12-VOLT)(WORK TOOL)
5.	159-9495	[1]	NUT (1-1/2-18-THD)
6.	159-9496	[1]	LOCKWASHER
7.	216-4725	[1]	HARNESS AS-WORK TOOL (LIFT ARM)
	7T-0093	[8]	PIN-CONNECTOR (12-GA TO 14-GA)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	1S-9593	[1]	STRAP-CABLE
	156-1458	[1]	COVER
	156-1460	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
8.	221-3881	[1]	PANEL GP-FUSE
	113-8490	[4]	FUSE (10-AMPERE)
	113-8491	[2]	FUSE (15-AMPERE)
	146-9439	[5]	RELAY AS (12-VOLT)(FUSE BLOCK)
	215-5564	[2]	SUPPRESSOR-ARC
9.	225-8012	[1]	HARNESS AS-WORK TOOL (PLATFORM)
	196-2412	[8]	TERMINAL AS (16-GA)
	9W-0844	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	196-2413	[3]	TERMINAL AS (12-GA)
	180-9340	[7]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	8T-8737	[1]	PLUG-SEAL
	128-4123	[3]	SEAL-CABLE
	7R-2750	[8]	SEAL-CONNECTOR
	173-8919	[3]	SEAL-CONNECTOR
	196-2414	[2]	TERMINAL AS (10-GA)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	196-2382	[1]	KIT-CONNECTING PLUG (2-PIN)
	196-2383	[1]	KIT-CONNECTING PLUG (8-PIN)
	196-2384	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, CONNECTOR LOCK & TERMINAL AS)
10.	095-0733 M	[2]	SCREW-MACHINE (M4X0.7X40-MM)
11.	3S-2093	[7]	STRAP-CABLE
12.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
13.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
14.	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
16.	178-3620	[1]	STRAP-DUAL CLAMP
17.	110-8760	[1]	STRAP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP37700259

225-7960: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

225-7960 WIRING GP-WORK TOOL -RADIAL LIFT
S/N MJH1-10574; RLL1-6799
PART OF 218-5933 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT

i01938583 SEBP3770

2257960 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 242B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
2.	115-1615	[1]	RELAY AS (12-VOLT)(MAIN POWER)
3.	142-8633	[1]	SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)
	111-7899	[1]	GASKET
4.	146-9439	[1]	RELAY AS (12-VOLT)(WORK TOOL)
5.	159-9495	[1]	NUT (1-1/2-18-THD)
6.	159-9496	[1]	LOCKWASHER
7.	221-3881	[1]	PANEL GP-FUSE
	113-8490	[4]	FUSE (10-AMPERE)
	113-8491	[2]	FUSE (15-AMPERE)
	146-9439	[5]	RELAY AS (12-VOLT)(FUSE BLOCK)
	215-5564	[2]	SUPPRESSOR-ARC
8.	225-7961	[1]	HARNESS AS-WORK TOOL (LIFT ARM)
	156-1458	[1]	COVER
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	7T-0093	[8]	PIN-CONNECTOR (12-GA TO 14-GA)
	156-1460	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	1S-9593	[1]	STRAP-CABLE
9.	225-8012	[1]	HARNESS AS-WORK TOOL (PLATFORM)
	8T-8737	[1]	PLUG-SEAL
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	128-4123	[3]	SEAL-CABLE
	7R-2750	[8]	SEAL-CONNECTOR
	173-8919	[2]	SEAL-CONNECTOR
	196-2414	[2]	TERMINAL AS (10-GA)
			(EACH INCLUDES)
	173-8919	[1]	SEAL-CONNECTOR
	196-2412	[8]	TERMINAL AS (16-GA)
			(EACH INCLUDES)
	7R-2750	[1]	SEAL-CONNECTOR
	180-9340	[7]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	9W-0844	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	196-2413	[3]	TERMINAL AS (12-GA)
			(EACH INCLUDES)
	128-4123	[1]	SEAL-CABLE
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	196-2382	[1]	KIT-CONNECTING PLUG (2-PIN)
	196-2383	[1]	KIT-CONNECTING PLUG (8-PIN)
	196-2384	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, CONNECTOR LOCK & TERMINAL AS)
10.	095-0733 M	[2]	SCREW-MACHINE (M4X0.7X40-MM)
11.	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	178-3620	[1]	STRAP-DUAL CLAMP
13.	3S-2093	[8]	STRAP-CABLE
14.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
15.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Circuit Breakers and Fuses - Reset/Replace
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders

Battery or Battery Cable - Inspect/Replace
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}
Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}

Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715}
Procedure For Connecting Wire Harnesses To Work Tools{1408, 6060, 6634, 6701, 6706, 6712, 6715}

Installing the 233-5706, 233-5638 Work Tool Control and Wiring Kits {1408, 5705, 7000}
Installing the 233-5706, 233-5638 Work Tool Control and Wiring Kits {1408, 5705, 7000}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 216B, 226B, 232B, 236B, 242B, 246B, 247B, 248B, 252B, 257B, 262B, 267B, 268B, 277B AND 287B SKID STEER LOADERS AND MULTI-TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE METER ON CERTAIN 216B, 226B, 232B, 236B, 242B, 246B, 247B, 248B, 252B, 257B, 262B, 267B, 268B, 277B AND 287B SKID STEER LOADERS AND MULTI-TERRAIN LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

POWER STUD MAY NOT BE ADEQUATELY COVERED TO PREVENT SHOCK HAZARD
POWER STUD MAY NOT BE ADEQUATELY COVERED TO PREVENT SHOCK HAZARD

INTERMITTENT ELECTRICAL PROBLEMS DUE TO MOISTURE IN JUMPER HARNESS CONNECTIONS IN CERTAIN SKID STEER LOADERS AND MULTI TERRAIN LOADERS
INTERMITTENT ELECTRICAL PROBLEMS DUE TO MOISTURE IN JUMPER HARNESS CONNECTIONS IN CERTAIN SKID STEER LOADERS AND MULTI TERRAIN LOADERS

THE AVAILABILITY OF SERVICE PARTS AND PART MANUAL FOR BRUSH CUTTERS WILL BE DELAYED
THE AVAILABILITY OF SERVICE PARTS AND PART MANUAL FOR BRUSH CUTTERS WILL BE DELAYED

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Cat Data Link
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Engine Start Interlock
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Hydrostatic System Interlock and Parking Brake Interlock
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Electronic Control Module (ECM)
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

General Information
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

General Information
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Work Tool Interlock
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Normal Operation
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Diagnostic Operation
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Relays
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Related Components
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Normal Operation
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Electronic Control Module (ECM)
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Related Components
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Glossary of Electrical Terms
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Electronic Control Module (ECM) - Replace
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Glossary of Electrical Terms
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Wiring Harness (Short Circuit) - Test
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Wiring Harness (Open Circuit) - Test
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Electric Starting System - Test
3024C and C1.1 Engines for Caterpillar Built Machines

Electronic Control Module (ECM) - Flash Program
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

System Schematic
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

System Schematic
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Initial Troubleshooting Procedure
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

General Information
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Electrical Component and Connector Locations
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Diagnostic Capabilities
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Engine Does Not Crank
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Work Tool Does Not Function
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System

Diagnostic Code List
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Power Supply Circuit of Electronic Control Module
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Auxiliary Hydraulic Does Not Function in One Direction
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

Auxiliary Hydraulic Does Not Function in Either Direction
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

MID 106 - CID 1187 - FMI 04
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

MID 106 - CID 1694 - FMI 03
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

MID 106 - CID 1694 - FMI 06
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

MID 106 - CID 1942 - FMI 04
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

High Flow Does Not Function in Either Direction
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

High Flow Does Not Function in One Direction
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Special Instruction, REHS2053, "Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders" is Available {1408, 5057, 6700, 7000, 7553}
2004/03/22

Work Tool High Flow Conversion Kits are Available {1408, 5057, 7553}
2004/06/07