AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

144-5707 VALVE GP-EXHAUST BYPASS (CHG -01 THRU -04) COMPRESSOR BYPASS PART OF 176-5915 VALVE & SUPPORT GP-EXH BYPASS FOR USE WITH 3618 ENGINE 3618


AIR INLET AND EXHAUST SYSTEM
EXHAUST GP
VALVE GP-SOLENOID
LINES GP-AIR
FUEL SYSTEM
CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR

MARINE ENGINE 3618 MARINE ENGINE 2MW
 3618 Marine 2MW00001-UP SEBP3774 3618 2MW   (1997)

AIR INLET AND EXHAUST SYSTEM

EXHAUST GP
BYPASS GP-EXHAUST
144-5706 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
144-5706 BYPASS GP-EXHAUST
SHIELD GP-HEAT
202-3571 SHIELD GP-HEAT
SHIELD GP-HEAT
205-5380 SHIELD GP-HEAT
VALVE & SUPPORT GP-EXH BYPASS
176-5915 VALVE & SUPPORT GP-EXH BYPASS
VALVE GP-EXHAUST BYPASS
144-5707 VALVE GP-EXHAUST BYPASS
 

#SEBP37740210
 

144-5707: VALVE GP-EXHAUST BYPASS

144-5707 VALVE GP-EXHAUST BYPASS (CHG -01 THRU -04)
COMPRESSOR BYPASS
PART OF 176-5915 VALVE & SUPPORT GP-EXH BYPASS
FOR USE WITH 3618 ENGINE
i01184233 SEBP3774
1445707 VALVE GP-EXHAUST BYPASS Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0405 [1] SEAL-BONDED  
2. 8T-0286 M [4] BOLT (M5X0.8X8-MM)  
3. 165-9880 [1] ACTUATOR AS  
4. 165-9881 [1] SWITCH AS  
5. 175-2859 [1] PLUG  
6. 165-9879 [1] VALVE AS  
7. 2W-9513 M [2] BOLT (M6X1X10-MM)  
8. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
9. 165-9882 [1] KIT-REPAIR (VALVE AS.)  
10. 165-9883 [1] KIT-SEAL (ACTUATOR AS.)  
  M   METRIC PART
 

#SEBP37740211
 

3E-2273: VALVE GP-SOLENOID

3E-2273 VALVE GP-SOLENOID (CHG -01 THRU -13)
24V
PART OF 151-4546 CONTROL & LINES GP-BYPASS
FIELD REPLACEMENT ORDER @@@@@189-8667@@@@@, 1-216-0101 WIRE AS
i00070813 SEBP3774
3E2273 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-7464 [1] COIL AS  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  1S-9593 [2] STRAP-CABLE  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
2. 101-3715 [1] CARTRIDGE AS  
3. 104-3947 [1] LOCKNUT (5/8-11-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7T-4515 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES SEALS)
 

#SEBP37740212
 

145-7335: ACTUATOR GP-ELECTRONIC

145-7335 ACTUATOR GP-ELECTRONIC (CHG -00 THRU -02)
Type 1
FOR USE WITH THE 3618 ENGINE
i00563578 SEBP3774
1457335 ACTUATOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1512 [1] PLATE AS  
  1W-7117 [2] DOWEL-HOLLOW  
2. 6V-5060 [1] SEAL-O-RING  
3. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
4. 3V-3308 [17] WASHER-HARD (10.2X20.5X2.5-MM THK)  
5. 7E-1292 [1] COVER-CAMSHAFT  
6. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
7. 0S-1621 [4] BOLT (1/2-13X1-IN)  
8. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
10. 9Y-7464 [1] LEVER  
11. 9X-9656 [1] PLUG AS-CONNECTOR (5-PIN)  
12. 153-6333 [1] ACTUATOR GP-ELECTRONIC  
13. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
14. 146-2752 Y [1] ROD GP-GOVERNOR ACTUATOR  
15. 146-2749 [1] SUPPORT  
16. 0S-1594 [5] BOLT (3/8-16X1-IN)  
17. 146-2751 [1] LEVER  
18. 146-2762 [1] BOLT (3/8-16X1.5-IN)  
19. 5P-4624 [2] BOLT (3/4-10X11.5-IN)  
20. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
21. 6V-8202 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
22. 154-2569 [1] PLATE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37740213
 

145-7335: ACTUATOR GP-ELECTRONIC

145-7335 ACTUATOR GP-ELECTRONIC (CHG -03)
Type 2
FOR USE WITH THE 3618 ENGINE
i00753332 SEBP3774
1457335 ACTUATOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1512 [1] PLATE AS  
  1W-7117 [2] DOWEL-HOLLOW  
2. 6V-5060 [1] SEAL-O-RING  
3. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
4. 3V-3308 [17] WASHER-HARD (10.2X20.5X2.5-MM THK)  
5. 7E-1292 [1] COVER-CAMSHAFT  
6. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
7. 6V-8202 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
8. 0S-1621 [4] BOLT (1/2-13X1-IN)  
9. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
10. 9Y-7464 [1] LEVER  
11. 9X-9656 [1] PLUG AS-CONNECTOR (5-PIN)  
12. 153-6333 [1] ACTUATOR GP-ELECTRONIC  
13. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
14. 154-7694 C [1] CYLINDER AS-AIR  
  2K-0564 C [1] LOCKNUT (1/2-20-THD)  
  3S-2713 C [2] NUT-FULL (3/8-24-THD)  
  7X-2640 C [2] ROD END  
15. 146-2749 [1] SUPPORT  
16. 0S-1594 [5] BOLT (3/8-16X1-IN)  
17. 146-2751 [1] LEVER  
18. 146-2762 [1] BOLT (3/8-16X1.5-IN)  
19. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 154-2569 [1] PLATE  
21. 5P-4624 [2] BOLT (3/4-10X11.5-IN)  
22. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
23. 8E-5383 CI [1] HOSE AS  
24. 6K-1972 C [1] ELBOW-FLARED  
25. 116-7774 CY [1] VALVE GP-SOLENOID  
26. 001-6449 C [2] CONNECTOR  
27. 4B-9302 C [1] CLIP (LOOP)  
28. 8T-4205 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 4M-5281 C [2] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37740214
 

145-7335: ACTUATOR GP-ELECTRONIC

145-7335 ACTUATOR GP-ELECTRONIC (CHG -04 THRU -08, 154-7694-02)
Type 3
FOR USE WITH THE 3618 ENGINE
i01074274 SEBP3774
1457335 ACTUATOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1352 C [2] BOLT (3/8-16X3.25-IN)  
2. 6V-5060 [1] SEAL-O-RING  
3. 168-8281 C [1] PLATE AS  
  1W-7117 C [2] DOWEL-HOLLOW  
4. 3V-3308 C [12] WASHER-HARD (10.2X20.5X2.5-MM THK)  
5. 7E-1292 [1] COVER-CAMSHAFT  
6. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
7. 6V-8202 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
8. 0S-1595 C [3] BOLT (1/2-13X1.25-IN)  
9. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
10. 9Y-7464 [1] LEVER  
11. 9X-9656 [1] PLUG AS-CONNECTOR (5-PIN)  
12. 188-7390 [1] ACTUATOR GP-ELECTRONIC  
13. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
14. 154-7694 [1] CYLINDER AS-AIR  
  3S-2713 [2] NUT-FULL (3/8-24-THD)  
  6B-6684 [1] NUT-FULL (1/2-20-THD)  
  3E-3226 [2] ROD END  
  154-7696 [1] ADAPTER  
  154-7697 [1] ADAPTER  
15. 146-2751 [1] LEVER  
16. 146-2762 [1] BOLT (3/8-16X1.5-IN)  
17. 5P-8245 C [3] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 166-3713 C [1] PLATE  
19. 5P-4625 C [1] BOLT (5/8-11X11-IN)  
20. 1T-0416 C [2] BOLT (5/16-18X0.75-IN)  
21. 6K-1972 [1] ELBOW-FLARED  
22. 4D-6988 C [3] CLIP  
23. 166-2586 C [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37740215
 

147-7293: CONTROL AS-GOVERNOR

147-7293 CONTROL AS-GOVERNOR (CHG -00 THRU -05)
i01291131 SEBP3774
1477293 CONTROL AS-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP37740216
 

225-6534: CONTROL AS-GOVERNOR

225-6534 CONTROL AS-GOVERNOR (CHG -00)
PART OF 232-1753 CONTROL GP-GOVERNOR
i01897722 SEBP3774
2256534 CONTROL AS-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICE PARTS
 

#SEBP37740217
 

144-9513: CONTROL GP-FUEL INJECTION

144-9513 CONTROL GP-FUEL INJECTION (CHG -00 THRU -05)
i00617246 SEBP3774
1449513 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0647 [18] ROD AS  
2. 5P-4965 [18] SCREW-MACHINE (10-32X1-IN)  
3. 4B-4274 [18] WASHER (5.5X13X1.2-MM THK)  
4. 4W-3930 [18] LEVER  
5. 1W-8491 [18] PLATE  
6. 1B-9575 [36] BOLT (5/16-18X1.56-IN)  
7. 1W-8407 [18] SLEEVE  
8. 9M-1974 [72] WASHER-HARD (8.8X16X2-MM THK)  
9. 3D-8752 [36] LOCKNUT (5/16-24-THD)  
10. 1W-8408 [18] BOLT-PIVOT (5/16-24-THD)  
11. 146-2867 [2] ROD AS  
    (EACH INCLUDES)
  1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
  3E-3226 [1] ROD END  
  3S-2713 [1] NUT-FULL (3/8-24-THD)  
  8C-6971 [1] ROD END  
12. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
13. 3V-3308 [32] WASHER-HARD (10.2X20.5X2.5-MM THK)  
14. 146-2758 [1] SHAFT AS  
15. 146-2760 [1] SHAFT AS  
16. 147-3531 [4] SPACER (19.1-MM ID)  
17. 147-3532 [2] PLUG  
18. 146-2765 [1] SUPPORT AS  
  5J-3241 [1] BEARING AS-NEEDLE  
  009-1436 [1] BEARING  
19. 146-2807 [1] LEVER  
20. 146-6572 [1] LEVER  
21. 146-2888 [1] LEVER  
22. 146-2904 [1] COVER AS  
  7B-0280 [1] SEAL-LIP TYPE  
  009-1436 [1] BEARING  
23. 146-2756 [1] SHAFT AS  
24. 146-2754 [1] SHAFT AS  
25. 4W-0687 [18] LEVER  
26. 4W-0693 [18] CAP  
27. 146-2763 [2] LEVER  
28. 146-2762 [5] BOLT (3/8-16X1.5-IN)  
29. 4W-6204 [2] BEARING  
30. 1W-1952 [2] BRACKET AS  
    (EACH INCLUDES)
  4W-6204 [1] BEARING  
31. 8S-4719 [18] BOLT (5/16-24X3.5-IN)  
32. 0S-1619 [18] BOLT (3/8-16X3-IN)  
33. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
34. 061-8561 [2] SEAL-O-RING  
35. 6V-4368 [1] SEAL-O-RING  
36. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
37. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
38. 4W-4803 [1] SETSCREW (3/8-16-THD)  
39. 146-2929 [1] COVER  
40. 1B-4218 [2] WASHER (0.39X0.625X0.064-IN THK)  
41. 146-6575 [1] PIN  
42. 5P-8119 [1] SEAL-O-RING  
43. 6V-5759 [1] SEAL-O-RING  
44. 152-6979 [1] BOLT  
45. 2D-4534 [4] BOLT-SOCKET HEAD (3/8-16X1-IN)  
46. 7E-8307 [2] FLANGE AS  
    (EACH INCLUDES)
  4W-6204 [1] BEARING  
47. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
48. 146-2766 [1] SHAFT  
49. 146-2748 [1] PLATE-RETAINER  
50. 6S-7567 [1] BOLT (3/8-16X2.5-IN)  
51. 166-2188 [1] SPACER  
52. 185-8882 [18] BOLT (5/16-18X1.41-IN)  
 

#SEBP37740218
 

197-4716: CONTROL GP-FUEL INJECTION

197-4716 CONTROL GP-FUEL INJECTION (CHG -01, -02)
i01663414 SEBP3774
1974716 CONTROL GP-FUEL INJECTION Parts scheme 1974716 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
2. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
3. 0S-1588 [16] BOLT (3/8-16X1.25-IN)  
4. 0S-1590 [2] BOLT (3/8-16X2-IN)  
5. 0S-1619 [18] BOLT (3/8-16X3-IN)  
6. 1B-4218 [2] WASHER (0.39X0.625X0.064-IN THK)  
7. 1B-9575 [36] BOLT (5/16-18X1.56-IN)  
8. 1W-0647 [18] ROD AS  
9. 1W-1952 [2] BRACKET AS  
  4W-6204 [1] BEARING  
10. 1W-8407 [18] SLEEVE  
11. 1W-8408 [18] BOLT-PIVOT (5/16-24-THD)  
12. 1W-8491 [18] PLATE  
13. 2D-4534 [4] BOLT-SOCKET HEAD (3/8-16X1-IN)  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 3D-8752 [36] LOCKNUT (5/16-24-THD)  
16. 3V-3308 [40] WASHER-HARD (10.2X20.5X2.5-MM THK)  
17. 4B-4274 [18] WASHER (5.5X13X1.2-MM THK)  
18. 4W-0687 [18] LEVER  
19. 4W-0693 [18] CAP  
20. 4W-3930 [18] LEVER  
21. 4W-4803 [1] SETSCREW (3/8-16-THD)  
22. 4W-6204 [2] BEARING  
23. 5P-4965 [18] SCREW-MACHINE (10-32X1-IN)  
24. 5P-8119 [1] SEAL-O-RING  
25. 6S-7567 [1] BOLT (3/8-16X2.5-IN)  
26. 6V-4368 [1] SEAL-O-RING  
27. 6V-5759 [1] SEAL-O-RING  
28. 7E-8307 [2] FLANGE AS  
  4W-6204 [1] BEARING  
29. 8S-4719 [18] BOLT (5/16-24X3.5-IN)  
30. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
31. 9M-1974 [72] WASHER-HARD (8.8X16X2-MM THK)  
32. 061-8561 [2] SEAL-O-RING  
33. 146-2754 [1] SHAFT AS  
34. 146-2756 [1] SHAFT AS  
35. 146-2758 [1] SHAFT AS  
36. 146-2760 [1] SHAFT AS  
37. 146-2762 [5] BOLT (3/8-16X1.5-IN)  
38. 146-2763 [2] LEVER  
39. 146-2807 [1] LEVER  
40. 146-2867 [2] ROD AS  
  1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
  3E-3226 [1] ROD END  
  3S-2713 [1] NUT-FULL (3/8-24-THD)  
  8C-6971 [1] ROD END  
41. 146-2888 [1] LEVER  
42. 146-2929 [1] COVER  
43. 147-3531 [4] SPACER (19.1-MM ID)  
44. 147-3532 [2] PLUG  
45. 146-6572 [1] LEVER  
46. 146-6575 [1] PIN  
47. 152-6979 [1] BOLT  
48. 166-2188 [1] SPACER  
49. 185-8882 [18] BOLT (5/16-18X1.41-IN)  
50. 5H-4279 [1] PLUG-CUP  
  196-4627 [1] SUPPORT AS  
  196-4632 [2] BEARING  
51. 196-4630 [1] COVER AS  
  7B-0280 [1] SEAL-LIP TYPE  
  196-4632 [1] BEARING  
52. 196-9257 [4] BRACKET AS  
  196-3074 [1] BEARING  
53. 205-5908 [1] PLATE  
54. 205-5909 [1] SHAFT  
 

#SEBP37740219
 

232-1753: CONTROL GP-GOVERNOR

232-1753 CONTROL GP-GOVERNOR (CHG -00)
i01898115 SEBP3774
2321753 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3618 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-6534 Y [1] CONTROL AS-GOVERNOR  
2. 154-8247 [1] POTENTIOMETER  
3. 4P-4788 Y [1] CONVERTER GP-ELECTRICAL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2004/01/01
Operation and Maintenance Manual
Exhaust Shields - Inspect
3618 Engine
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Systems Operation
Compressor Bypass Group
3618 Engine
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Testing and Adjusting
Restriction of Air Inlet and Exhaust
3618 Engine
Measuring Exhaust Temperature
3618 Engine

Caterpillar Parts SIS Catalog 3618 :

VALVE & SUPPORT GP-EXH BYPASS
176-5915 VALVE & SUPPORT GP-EXH BYPASS
164-4859 TURBOCHARGER GP
161-7997 TURBOCHARGER GP
142-3418 TURBOCHARGER GP
144-8276 SILENCER & AIR CLEANER GP
SHIELD GP-HEAT
205-5380 SHIELD GP-HEAT
SHIELD GP-HEAT
202-3571 SHIELD GP-HEAT
MOUNTING GP-TURBOCHARGER
142-2842 MOUNTING GP-TURBOCHARGER
VALVE GP-SOLENOID
3E-2273 VALVE GP-SOLENOID
ACTUATOR GP-ELECTRONIC
145-7335 ACTUATOR GP-ELECTRONIC
ACTUATOR GP-ELECTRONIC
145-7335 ACTUATOR GP-ELECTRONIC
ACTUATOR GP-ELECTRONIC
145-7335 ACTUATOR GP-ELECTRONIC
CONTROL AS-GOVERNOR
147-7293 CONTROL AS-GOVERNOR
CONTROL AS-GOVERNOR
225-6534 CONTROL AS-GOVERNOR
CONTROL GP-FUEL INJECTION
144-9513 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
197-4716 CONTROL GP-FUEL INJECTION

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.