AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-0433 CYLINDER BLOCK GP (CHG -03 THRU -07, 7C-0434-06) G3606 GAS ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GAS ENGINE G3606 GAS ENGINE 3XF
 G3606 GENERATOR AND INDUSTRIAL 3XF00001-UP SEBP3775 G3606 3XF   (1990)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
165-4405 CYLINDER BLOCK GP
CYLINDER BLOCK GP
214-6053 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-0433 CYLINDER BLOCK GP
KIT-CYLINDER BLOCK
137-2193 KIT-CYLINDER BLOCK
VALVE GP-EXPLOSION RELIEF
1W-3645 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
360-2833 VALVE GP-EXPLOSION RELIEF
 

#SEBP37750440
 

7C-0433: CYLINDER BLOCK GP

7C-0433 CYLINDER BLOCK GP (CHG -03 THRU -07, 7C-0434-06)
i00068530 SEBP3775
7C0433 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0121 [14] STUD-TAPERLOCK  
2. 1W-0123 [14] NUT (2-12-THD)  
3. 1W-0122 [14] WASHER (52X110X12-MM THK)  
4. 3S-7079 [14] BOLT (1-1/4-12X9.5-IN)  
5. 4K-0684 [14] WASHER-HARD (34X55X6-MM THK)  
6. 6V-3602 [6] SEAL-O-RING  
7. 7C-5044 [6] LINER-CYLINDER BLOCK  
8. 8T-9047 [18] SEAL-O-RING  
9. 1W-0105 [7] BEARING-CAMSHAFT  
10. 6V-3539 [12] DOWEL  
11. 6V-3538 [16] DOWEL  
12. 6V-3540 [2] DOWEL  
13. 3P-0656 [1] SEAL-O-RING  
14. 6V-3955 [3] SEAL-O-RING  
15. 9S-8005 [3] PLUG (3/4-16-THD)  
16. 8L-2786 [8] SEAL-O-RING  
17. 7W-7469 [1] PLUG  
18. 4W-6283 [6] JET AS-PISTON COOLING  
19. 0T-0573 [12] BOLT (3/8-16X2.75-IN)  
20. 7E-8400 [24] STUD-TAPERLOCK  
21. 7N-2328 [2] DOWEL  
22. 9S-8006 C [8] PLUG (7/8-14-THD)  
23. 6V-4589 C [8] SEAL-O-RING  
24. 9S-4185 C [5] PLUG (3/4-16-THD)  
25. 1W-1960 [1] GASKET  
26. 4B-3140 [1] COVER  
27. 0S-1594 [2] BOLT (3/8-16X1-IN)  
28. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
29. 124-1836 [7] CAP AS-BEARING (CRANKSHAFT)(EACH INCLUDES)  
30. 6V-3538 [1] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP37750441
 

109-7404: CYLINDER HEAD AS

109-7404 CYLINDER HEAD AS (CHG -00 THRU -02, -02D1, -03)
PART OF 111-7217 CYLINDER HEAD GP
i00068777 SEBP3775
1097404 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8002 [1] PLUG (7/16-20-THD)  
2. 4P-2853 [2] INSERT-VALVE SEAT (INLET)  
3. 9S-9334 [4] PLUG  
4. 6V-5064 [4] SEAL-O-RING  
5. 9S-8010 [4] PLUG  
6. 6V-5065 [4] SEAL-O-RING  
7. 8T-6759 [2] PLUG-PIPE  
8. 4W-5442 [2] PLUG-DOWEL  
9. 6V-5061 [2] SEAL-O-RING  
10. 1W-2167 [2] PLUG  
11. 6V-5062 [2] SEAL-O-RING  
12. 109-1544 [2] INSERT-VALVE SEAT (EXHAUST)  
13. 7C-4298 [4] PLUG-CUP (ORIFICE)  
14. 3J-7354 [2] SEAL-O-RING  
15. 9S-4182 [1] PLUG (7/16-20-THD)  
 

#SEBP37750442
 

130-1067: CYLINDER HEAD AS

130-1067 CYLINDER HEAD AS (CHG -01, -01D1)
30 DEGREE EXHAUST
PART OF 130-1066 CYLINDER HEAD GP
i00096258 SEBP3775
1301067 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8002 [1] PLUG (7/16-20-THD)  
2. 4P-2853 [2] INSERT-VALVE SEAT (INLET)  
3. 9S-9334 [4] PLUG  
4. 6V-5064 [4] SEAL-O-RING  
5. 9S-8010 [4] PLUG  
6. 6V-5065 [4] SEAL-O-RING  
7. 8T-6759 [2] PLUG-PIPE  
8. 4W-5442 [2] PLUG-DOWEL  
9. 6V-5061 [2] SEAL-O-RING  
10. 1W-2167 [2] PLUG  
11. 6V-5062 [2] SEAL-O-RING  
12. 7W-9779 [2] INSERT-VALVE SEAT (EXHAUST)  
13. 7C-4298 [4] PLUG-CUP (ORIFICE)  
14. 3J-7354 [2] SEAL-O-RING  
15. 9S-4182 [1] PLUG (7/16-20-THD)  
16. 4P-3766 [1] INSERT (PRECHAMBER)  
 

#SEBP37750443
 

148-3044: CYLINDER HEAD AS

148-3044 CYLINDER HEAD AS (CHG -00, -01, -01D1)
PART OF 148-3043, 155-4092, 155-4093, 161-1205 CYLINDER HEAD GP
i00569603 SEBP3775
1483044 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2167 [2] PLUG  
2. 3J-7354 [2] SEAL-O-RING  
3. 4P-2853 [2] INSERT-VALVE SEAT (INLET)  
4. 4W-5442 [2] PLUG-DOWEL  
5. 6V-5061 [2] SEAL-O-RING  
6. 6V-5062 [2] SEAL-O-RING  
7. 6V-5064 [4] SEAL-O-RING  
8. 6V-5065 [4] SEAL-O-RING  
9. 7C-4298 [4] PLUG-CUP (ORIFICE)  
10. 8T-6759 [2] PLUG-PIPE  
11. 9S-4182 [1] PLUG (7/16-20-THD)  
12. 9S-8002 [1] PLUG (7/16-20-THD)  
13. 9S-8010 [4] PLUG  
14. 9S-9334 [4] PLUG  
15. 109-1544 [2] INSERT-VALVE SEAT (EXHAUST)  
16. 148-7142 [1] INSERT (PRECHAMBER)  
  148-7143 AB INSERT (0.25-MM OS, PRECHAMBER)(PRECHAMBER)  
  148-7144 AB INSERT (0.5-MM OS)(PRECHAMBER)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP37750444
 

148-3057: CYLINDER HEAD AS

148-3057 CYLINDER HEAD AS (CHG -00, -01, -01D1)
30 DEGREE EXHAUST
PART OF 148-3056 CYLINDER HEAD GP
i00569258 SEBP3775
1483057 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2167 [2] PLUG  
2. 3J-7354 [2] SEAL-O-RING  
3. 4W-5442 [2] PLUG-DOWEL  
4. 6V-5061 [2] SEAL-O-RING  
5. 6V-5062 [2] SEAL-O-RING  
6. 6V-5064 [4] SEAL-O-RING  
7. 6V-5065 [4] SEAL-O-RING  
8. 7C-4298 [4] PLUG-CUP (ORIFICE)  
9. 8T-6759 [2] PLUG-PIPE  
10. 9S-4182 [1] PLUG (7/16-20-THD)  
11. 9S-8002 [1] PLUG (7/16-20-THD)  
12. 9S-8010 [4] PLUG  
13. 9S-9334 [4] PLUG  
14. 4P-2853 [2] INSERT-VALVE SEAT (INLET)  
15. 7W-9779 [2] INSERT-VALVE SEAT (EXHAUST)(EXHAUST)  
16. 148-7142 [1] INSERT (PRECHAMBER)  
  148-7143 AB INSERT (0.25-MM OS, PRECHAMBER)(PRECHAMBER)  
  148-7144 AB INSERT (0.5-MM OS)(PRECHAMBER)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP37750445
 

170-7740: CYLINDER HEAD AS

170-7740 CYLINDER HEAD AS (CHG -00, -01, -01D1)
PART OF 171-3994, 171-3995, 185-3606, 194-3250 CYLINDER HEAD GP
i01132272 SEBP3775
1707740 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-7354 [2] SEAL-O-RING  
2. 4W-5442 [2] PLUG-DOWEL  
3. 6V-5061 [2] SEAL-O-RING  
4. 7C-4298 [4] PLUG-CUP (ORIFICE)  
5. 8T-6759 [2] PLUG-PIPE  
6. 9S-4182 [1] PLUG (7/16-20-THD)  
7. 9S-8002 [1] PLUG (7/16-20-THD)  
9. 171-3992 [2] INSERT-VALVE SEAT (INLET)  
10. 171-3993 [2] INSERT-VALVE SEAT (EXHAUST)  
11. 148-7142 [1] INSERT (PRECHAMBER)  
12. 3B-0645 [7] PLUG-CUP  
13. 2M-6471 [4] PLUG-CUP  
  148-7144 AB INSERT (0.5-MM OS)(PRECHAMBER)  
  148-7143 AB INSERT (0.25-MM OS, PRECHAMBER)(PRECHAMBER)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP37750446
 

170-7741: CYLINDER HEAD AS

170-7741 CYLINDER HEAD AS (CHG -00, -01, -01D1)
30 DEGREE EXHAUST
PART OF 171-3996 CYLINDER HEAD GP
i01132282 SEBP3775
1707741 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-7354 [2] SEAL-O-RING  
2. 4W-5442 [2] PLUG-DOWEL  
3. 6V-5061 [2] SEAL-O-RING  
4. 7C-4298 [4] PLUG-CUP (ORIFICE)  
5. 8T-6759 [2] PLUG-PIPE  
6. 9S-4182 [1] PLUG (7/16-20-THD)  
7. 9S-8002 [1] PLUG (7/16-20-THD)  
8. 148-7142 [1] INSERT (PRECHAMBER)  
9. 160-5770 [2] INSERT-VALVE SEAT (EXHAUST)  
11. 171-3992 [2] INSERT-VALVE SEAT (INLET)  
12. 2M-6471 [4] PLUG-CUP  
13. 3B-0645 [7] PLUG-CUP  
  148-7144 AB INSERT (0.5-MM OS)(PRECHAMBER)  
  148-7143 AB INSERT (0.25-MM OS, PRECHAMBER)(PRECHAMBER)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP37750447
 

213-6958: CYLINDER HEAD AS

213-6958 CYLINDER HEAD AS (CHG -00, -01, -01D1, 213-6956-01D1)
PART OF 213-6962, 213-6964 CYLINDER HEAD GP
i01614611 SEBP3775
2136958 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5442 [2] PLUG-DOWEL  
2. 7C-4298 [4] PLUG-CUP (ORIFICE)  
3. 213-6956 [1] CYLINDER HEAD AS  
3A. 171-3992 [2] INSERT-VALVE SEAT (INLET)  
  203-9566 AB INSERT-VALVE SEAT (0.5-MM OS, INLET)  
  272-5886 AB INSERT-VALVE SEAT (1-MM OS, INLET)  
3B. 171-3993 [2] INSERT-VALVE SEAT (EXHAUST)  
  203-9567 AB INSERT-VALVE SEAT (0.5-MM OS, EXHAUST)  
  203-9569 AB INSERT-VALVE SEAT (1-MM OS, EXHAUST)  
4. 229-8567 [1] INSERT (PRECHAMBER)  
  229-8570 AB INSERT (0.25-MM OS, PRECHAMBER)  
  229-8571 AB INSERT (0.5-MM OS, PRECHAMBER)  
5. 2M-6471 [4] PLUG-CUP  
6. 3B-0645 [7] PLUG-CUP  
7. 3J-7354 [2] SEAL-O-RING  
8. 6V-5061 [2] SEAL-O-RING  
9. 8T-6759 [2] PLUG-PIPE  
10. 9S-4182 [1] PLUG (7/16-20-THD)  
11. 9S-8002 [1] PLUG (7/16-20-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP37750448
 

219-2954: CYLINDER HEAD AS

219-2954 CYLINDER HEAD AS (CHG -00, -01, -01D1, 219-2953-01D1)
PART OF 219-2955, 219-2956, 219-2957 CYLINDER HEAD GP
i01797657 SEBP3775
2192954 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5442 [2] PLUG-DOWEL  
2. 7C-4298 [4] PLUG-CUP (ORIFICE)  
3. 219-2953 [1] CYLINDER HEAD AS  
3A. 171-3992 [2] INSERT-VALVE SEAT (INLET)  
  203-9566 AB INSERT-VALVE SEAT (0.5-MM OS, INLET)  
  272-5886 AB INSERT-VALVE SEAT (1-MM OS, INLET)  
3B. 171-3993 [2] INSERT-VALVE SEAT (EXHAUST)  
  203-9567 AB INSERT-VALVE SEAT (0.5-MM OS, EXHAUST)  
  203-9569 AB INSERT-VALVE SEAT (1-MM OS, EXHAUST)  
4. 229-8567 [1] INSERT (PRECHAMBER)  
  229-8570 AB INSERT (0.25-MM OS, PRECHAMBER)  
  229-8571 AB INSERT (0.5-MM OS, PRECHAMBER)  
5. 2M-6471 [4] PLUG-CUP  
6. 3B-0645 [7] PLUG-CUP  
7. 3J-7354 [2] SEAL-O-RING  
8. 6V-5061 [2] SEAL-O-RING  
9. 8T-6759 [2] PLUG-PIPE  
10. 9S-4182 [1] PLUG (7/16-20-THD)  
11. 9S-8002 [1] PLUG (7/16-20-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP37750449
 

255-0024: CYLINDER HEAD AS

255-0024 CYLINDER HEAD AS (CHG -00)
PART OF 255-0025 CYLINDER HEAD AS
i02252284 SEBP3775
2550024 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-3992 [2] INSERT-VALVE SEAT (INLET)  
  203-9566 AB INSERT-VALVE SEAT (0.5-MM OS, INLET)  
  272-5886 AB INSERT-VALVE SEAT (1-MM OS, INLET)  
2. 171-3993 [2] INSERT-VALVE SEAT (EXHAUST)  
  203-9567 AB INSERT-VALVE SEAT (0.5-MM OS, EXHAUST)  
  203-9569 AB INSERT-VALVE SEAT (1-MM OS, EXHAUST)  
3. [1] HEAD-CYLINDER  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Head And Cylinder Liner Gasket Kits Available{1124,1100,1216}
1995/06/01
Main Bearing Cap Installation Procedure{1203}
1995/06/01
New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01
New Main Bearing Provides Improved Oil Distribution {1203}
1996/01/17
New Technique To Remove Cylinder Head From Cylinder Block{1101,1201}
1996/07/22
New Cylinder Head Group Used In Landfill Applications And In 11:1 Compression Ratio Engines{1100,1103,1105}
1996/11/01
Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22
Procedure For Disassembly And Assembly Of The Pressure Relief Valve{1233}
1997/09/15
New Main Bearing Studs With Oversize Thread Available {1224}
1998/07/01
New Main Bearing Used {1203}
1998/08/01
Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Disassembly And Assembly Of Main Bearings For Journals Without Oil Holes {1203}
2000/01/01
The 151-7417 Engine Liner Hone Is Available {1216}
2002/05/01
New Gasket For The Cylinder Block Cover {1201}
2003/11/01
New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
2004/05/17
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01
Using the Detonation Detection System to Troubleshoot Mechanical Problems in G3600 Engines {1223, 1559}
2010/10/08
Operation and Maintenance Manual
Cylinder Pressure - Measure/Record
G3606 and G3608 Engines
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Test and Repair Procedures for 8T0895 Stud Tensioner Cylinder Group and 6V7047 and 5P5247 Hydraulic Puller Assemblies{1000}
Test and Repair Procedures for 8T0895 Stud Tensioner Cylinder Group and 6V7047 and 5P5247 Hydraulic Puller Assemblies{1000}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Jacket Water Side Cover Bolt Breakage
Jacket Water Side Cover Bolt Breakage
Cylinder Block And Cylinder Liner Pitting
Cylinder Block And Cylinder Liner Pitting
G3600 Cylinder Liner Cracking
G3600 Cylinder Liner Cracking
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Specifications
Cylinder Block
G3606 and G3608 Engines
Cylinder Liner
G3606 and G3608 Engines
Piston and Rings
G3606 and G3608 Engines
Connecting Rod
G3606 and G3608 Engines
Service Letter-China
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Service Letter-Asia
Systems Operation
Basic Block
G3606 and G3608 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Disassembly and Assembly
Crankcase Explosion Relief Valve - Remove and Install
G3606 and G3608 Engines
Crankshaft Rear Seal - Remove
G3606 and G3608 Engines
Crankshaft Rear Seal - Install
G3606 and G3608 Engines
Cylinder Liner - Install
G3606 and G3608 Engines
Piston Cooling Jets - Remove and Install
G3606 and G3608 Engines
Cylinder Liner - Remove
G3606 and G3608 Engines
Camshaft Bearings - Remove
G3606 and G3608 Engines
Camshaft Bearings - Install
G3606 and G3608 Engines
Connecting Rod Bearings - Remove and Install
G3606 and G3608 Engines
Crankcase Cover - Remove and Install
G3606 and G3608 Engines
Crankshaft Main Bearings - Remove
G3606 and G3608 Engines
Crankshaft Main Bearings - Install
G3606 and G3608 Engines
Crankshaft Main Bearings - Install
G3606 and G3608 Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27

Caterpillar Parts SIS Catalog G3606 :

CYLINDER BLOCK GP
214-6053 CYLINDER BLOCK GP
CYLINDER BLOCK GP
165-4405 CYLINDER BLOCK GP
CYLINDER BLOCK GP
165-4405 CYLINDER BLOCK GP
CYLINDER BLOCK AS
214-6052 CYLINDER BLOCK AS
CYLINDER BLOCK AS
165-4404 CYLINDER BLOCK AS
CRANKSHAFT GP
1W-0785 CRANKSHAFT GP
CRANKSHAFT GP
179-3572 CRANKSHAFT GP
CRANKSHAFT AS
361-8845 CRANKSHAFT AS
CYLINDER HEAD AS
109-7404 CYLINDER HEAD AS
CYLINDER HEAD AS
130-1067 CYLINDER HEAD AS
CYLINDER HEAD AS
148-3044 CYLINDER HEAD AS
CYLINDER HEAD AS
148-3057 CYLINDER HEAD AS
CYLINDER HEAD AS
170-7740 CYLINDER HEAD AS
CYLINDER HEAD AS
170-7741 CYLINDER HEAD AS
CYLINDER HEAD AS
213-6958 CYLINDER HEAD AS
CYLINDER HEAD AS
219-2954 CYLINDER HEAD AS

Truck sale:

2000 CAT G3606
Call 
2000 CAT G3606

React Power Solutions
Houston, Texas
CATERPILLAR G3606 1998
$260,000 USD 
CATERPILLAR G3606 1998
- INDUSTRIAL
LOUISIANA CAT POWER SYSTEMS
5415 E. Broad St. - Lake Charles - Lou
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.