218-3902 PRECHAMBER GP (CHG -00 THRU -05-05D1 THRU -07) HIGH EFFICIENCY G3606 GAS ENGINE

BASIC ENGINE

CYLINDER HEAD GP

0. 218-3902 PRECHAMBER
1. 218-3907 PRECHAMBER

PUMP GP-GEAR

2. 116-6965 PUMP GP-GE
3. 219-9770 PUMP GP-GE

VALVE MECHANISM GP

4. 123-9211 RETAINER-R
5. 100-9979 ROCKER ARM
6. 7C-0419 ROCKER ARM
7. 7C-0419 ROCKER ARM

CRANKSHAFT GP

8. 7W-9683 SEAL GP-CR
9. 7W-9683 SEAL GP-CR
0. INFORMATION

GAS ENGINE G3606 GAS ENGINE 3XF
G3606 GENERATOR AND INDUSTRIAL 3XF00001-UP SEBP3775 G3606 3XF (1990)

BASIC ENGINE

CYLINDER HEAD GP

117-4911 PRECHAMBER GP

218-3893 PRECHAMBER GP

218-3902 PRECHAMBER GP

218-3907 PRECHAMBER GP

8T-2660 COMPRESSOR GP-VALVE SPRING

9U-5099 PULLER GP-VALVE SEAT

#SEBP37750590

218-3902: PRECHAMBER GP

PRECHAMBER GP

218-3902 PRECHAMBER GP (CHG -00 THRU -05-05D1 THRU -07)
HIGH EFFICIENCY

i01797729 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-1630	[1]	GASKET
2.	102-4157	[1]	PLUG
3.	125-3848	[1]	PRECHAMBER AS
4.	218-3905	[1]	BODY AS
4A.	4F-6024	[2]	PIN
5.	219-6908	[1]	GASKET
6.	219-7009	[1]	GASKET
7.	253-0857	[1]	VALVE AS-CHECK
7A.	9M-5590	[1]	BALL
7B.	253-0859	[1]	STOP-CHECK VALVE
7C.	253-0858	[1]	BODY-CHECK VALVE
8.	275-4011	[2]	SPACER (15.5X29X62.5-MM THK)
9.	3P-0647	[1]	SEAL-O-RING
10.	5P-4889	[1]	SEAL-O-RING
11.	5P-7815	[1]	SEAL-O-RING
12.	6J-2244	[1]	SEAL-O-RING
13.	6V-1179	[1]	SEAL-O-RING
14.	6V-4368	[1]	SEAL-O-RING
15.	7D-1649	[2]	WASHER-HARD (13.5X32X5-MM THK)
16.	8D-0648	[2]	BOLT-12 POINT HEAD (1/2-13X4.5-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37750591

218-3907: PRECHAMBER GP

PRECHAMBER GP

218-3907 PRECHAMBER GP (CHG -00 THRU -05, -05D1, -06, -06D1, 208-9649-01)
LANDFILL

i01797693 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-1630	[1]	GASKET
2.	9S-9334	[1]	PLUG
3.	125-3848	[1]	PRECHAMBER AS
4.	173-7663	[1]	BODY GP-PRECHAMBER
4A.	7N-2043	[1]	DOWEL
4B.	4F-6024	[2]	PIN
5.	218-3908	[1]	FLANGE
6.	219-6908	[1]	GASKET
7.	219-7009	[1]	GASKET
8.	253-0857	[1]	VALVE AS-CHECK
8A.	9M-5590	[1]	BALL
8B.	253-0859	[1]	STOP-CHECK VALVE
8C.	253-0858	[1]	BODY-CHECK VALVE
9.	275-4011	[2]	SPACER (15.5X29X62.5-MM THK)
10.	3P-0647	[1]	SEAL-O-RING
11.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	5P-4889	[1]	SEAL-O-RING
13.	6J-2244	[1]	SEAL-O-RING
14.	6V-1179	[1]	SEAL-O-RING
15.	6V-4368	[1]	SEAL-O-RING
16.	7B-8167	[4]	BOLT (1/4-20X1.625-IN)
17.	7D-1649	[2]	WASHER-HARD (13.5X32X5-MM THK)
18.	7M-8485	[1]	SEAL-O-RING
19.	8C-0624	[1]	SEAL-O-RING
20.	8D-0648	[2]	BOLT-12 POINT HEAD (1/2-13X4.5-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37750592

116-6965: PUMP GP-GEAR

PUMP GP-GEAR

116-6965 PUMP GP-GEAR -1-SECTION (CHG -00 THRU -03)

i00552203 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	184-6957 J	[1]	PUMP GP-GEAR (BASIC)
2.	6V-3964	[1]	WASHER-HARD (8.8X25.5X5-MM THK)
3.	1W-3390	[1]	GEAR (42-TEETH)
4.	1W-3389	[1]	GEAR (55-TEETH)
5.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
6.	0L-1143	[6]	BOLT (3/8-16X2.5-IN)
7.	0S-1585	[2]	BOLT (1/2-13X1.5-IN)
8.	5D-5957	[1]	SEAL-O-RING
9.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)

			AVAILABLE REPAIR KIT(S):
	184-6959 J	[1]	KIT-SEAL (PUMP GP)
			(INCLUDES MECHANICAL SEAL, LIP SEAL AND(4) O-RINGS)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP37750593

219-9770: PUMP GP-GEAR

PUMP GP-GEAR

219-9770 PUMP GP-GEAR (CHG -01)
PART OF 220-8664 PUMP GP-PRELUBRICATION

i01712058 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP37750594

123-9211: RETAINER-ROCKER ARM

RETAINER-ROCKER ARM

123-9211 RETAINER-ROCKER ARM (CHG -01)
FOR LOW BTU USEAGE

i00068849 SEBP3775

1239211 RETAINER-ROCKER ARM Parts scheme

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP37750595

100-9979: ROCKER ARM GP

ROCKER ARM GP

100-9979 ROCKER ARM GP (CHG -03 THRU -09)
LANDFILL
PART OF 104-4837 VALVE MECHANISM GP

i00068740 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8409	[2]	PLATE-THRUST
2.	1W-8410	[1]	SHAFT AS-ARM
2A.	9F-2247	[2]	PLUG-PIPE
3.	1W-8444	[1]	SUPPORT-SHAFT
4.	2A-4429	[2]	LOCK-RETAINER
5.	6I-2313	[1]	SEAL
6.	7E-7202	[2]	BUTTON
7.	7N-1903	[1]	SPRING-VALVE INNER
8.	7N-1904	[1]	SPRING-VALVE OUTER
9.	7W-5720	[1]	SHAFT
10.	7W-5725	[1]	ROCKER ARM AS
	1W-0605	[1]	PIN-HOUSING SIDE
11.	061-9455	[1]	SEAL-O-RING
12.		[1]	SUPPORT AS
12A.	100-4996	[1]	GUIDE-VALVE
13.	108-5603	[1]	SCREW (3/8-24X1.67-IN)
14.	115-2368	[1]	VALVE-INLET
15.	122-9578 C	[1]	ARM AS
15A.	1W-0605	[1]	PIN-HOUSING SIDE
16.	129-4859	[2]	ROCKER ARM AS
			(EACH INCLUDES)
16A.	6I-0578	[1]	BUSHING
16B.	151-4918	[1]	INSERT
16C.	2D-6642	[1]	BALL
17.	197-6999	[1]	ROTOCOIL AS
18.	204-4385	[2]	SCREW-ADJUSTMENT (3/4-16-THD)
19.	209-0962	[1]	WASHER (17.8X45X7.29-MM THK)
20.	0S-1617	[4]	BOLT (5/16-18X0.75-IN)
21.	6V-5019	[2]	NUT-JAM (3/4-16-THD)
22.	7L-9061	[2]	SEAL-O-RING
23.	8J-4351	[1]	SEAL-O-RING
24.	3S-2713	[1]	NUT-FULL (3/8-24-THD)
25.	9X-3978	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37750596

7C-0419: ROCKER ARM GP

ROCKER ARM GP

7C-0419 ROCKER ARM GP (CHG -01 THRU -13)
PART OF 7C-0417 VALVE MECHANISM GP
Type 1

i00068521 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8409	[2]	PLATE-THRUST
2.	6I-0576	[2]	ROCKER ARM AS
			(EACH INCLUDES)
3.	6I-0578	[1]	BUSHING
4.	7E-7203	[1]	INSERT
5.	7L-9061	[2]	SEAL-O-RING
6.	7E-7202	[2]	BUTTON
7.	1W-8444	[1]	SUPPORT-SHAFT
8.	7W-7231	[2]	SCREW-ADJUSTMENT
9.	6V-5019	[2]	NUT-JAM (3/4-16-THD)
10.	9Y-2058	[1]	ARM AS
11.	7W-7232	[2]	ADAPTER
12.	5P-7814	[2]	SEAL-O-RING
13.	9Y-2057	[1]	SCREW-VALVE ADJUSTMENT
14.	7C-2359	[1]	SUPPORT AS
15.	100-4996	[1]	GUIDE-VALVE
16.	061-9455	[1]	SEAL-O-RING
17.	8J-4351	[1]	SEAL-O-RING
18.	7W-5720	[1]	SHAFT
19.	7W-5725	[1]	ROCKER ARM AS
20.	106-1111	[1]	VALVE-EXHAUST
21.	2A-4429	[2]	LOCK-RETAINER
22.	4P-2521	[1]	ROTOCOIL AS
23.	7N-1904	[1]	SPRING-VALVE OUTER
24.	7N-1903	[1]	SPRING-VALVE INNER
25.	2W-2662	[1]	SEAT-SPRING
26.	7W-5718	[1]	SEAL
27.	7E-7074	[1]	RETAINER
28.	2S-3991	[3]	PLUNGER
29.	2S-3992	[3]	SPRING
30.	1W-8410	[1]	SHAFT AS-ARM
31.	9F-2247	[2]	PLUG-PIPE
32.	0S-1617	[4]	BOLT (5/16-18X0.75-IN)
33.	9X-3978	[1]	SEAL-O-RING
34.	6I-2313	[1]	SEAL

#SEBP37750597

7C-0419: ROCKER ARM GP

ROCKER ARM GP

7C-0419 ROCKER ARM GP (CHG -14 THRU -22)
PART OF 7C-0417 VALVE MECHANISM GP
Type 2

i00068522 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8409	[2]	PLATE-THRUST
2.	1W-8410	[1]	SHAFT AS-ARM
2A.	9F-2247	[2]	PLUG-PIPE
3.	1W-8444	[1]	SUPPORT-SHAFT
4.	2A-4429	[2]	LOCK-RETAINER
5.	3S-2713	[1]	NUT-FULL (3/8-24-THD)
6.	6I-2313	[1]	SEAL
7.	7C-2359	[1]	SUPPORT AS
7A.	100-4996	[1]	GUIDE-VALVE
8.	7E-7074	[1]	RETAINER
9.	7E-7202	[2]	BUTTON
10.	7N-1903	[1]	SPRING-VALVE INNER
11.	7N-1904	[1]	SPRING-VALVE OUTER
12.	7W-5718	[1]	SEAL
13.	7W-5720	[1]	SHAFT
14.	7W-5725	[1]	ROCKER ARM AS
14A.	1W-0605	[1]	PIN-HOUSING SIDE
15.	061-9455	[1]	SEAL-O-RING
16.	108-5603	[1]	SCREW (3/8-24X1.67-IN)
17.	115-2367	[1]	VALVE-EXHAUST
18.	122-9578	[1]	ARM AS
18A.	1W-0605	[1]	PIN-HOUSING SIDE
19.	129-4859	[2]	ROCKER ARM AS
			(EACH INCLUDES)
19A.	6I-0578	[1]	BUSHING
19B.	151-4918	[1]	INSERT
19C.	2D-6642	[1]	BALL
20.	197-6999	[1]	ROTOCOIL AS
21.	204-4385	[2]	SCREW-ADJUSTMENT (3/4-16-THD)
22.	209-0962	[1]	WASHER (17.8X45X7.29-MM THK)
23.	0S-1617	[4]	BOLT (5/16-18X0.75-IN)
24.	6V-5019	[2]	NUT-JAM (3/4-16-THD)
25.	7L-9061	[2]	SEAL-O-RING
26.	8J-4351	[1]	SEAL-O-RING
27.	9X-3978	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP37750598

7W-9683: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

7W-9683 SEAL GP-CRANKSHAFT (CHG -02)
STANDARD ENGINE ROTATION
Type 1

i00069080 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-9036	[1]	ADAPTER AS
2.	106-2033 C	[1]	ADAPTER-CRANKSHAFT
3.	9Y-7625	[1]	SEAL AS
			(IN REAR HOUSING ON STANDARD ROTATION ENGINE & IN FRONT HOUSING ON REVERSE ROTATION ENGINE)
4.	9Y-7624	[1]	SEAL AS
			(IN FRONT HOUSING ON STANDARD ROTATION ENGINE & IN REAR HOUSING ON REVERSE ROTATION ENGINE)
5.	1D-4601	[8]	BOLT (5/8-11X8.5-IN)
6.	0S-1588	[18]	BOLT (3/8-16X1.25-IN)
7.	3V-3308	[18]	WASHER-HARD (10.2X20.5X2.5-MM THK)
8.	6V-5059	[2]	SEAL-O-RING
9.	106-2027 C	[1]	SLEEVE-WEAR
	C		CHANGE FROM PREVIOUS TYPE

#SEBP37750599

7W-9683: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

7W-9683 SEAL GP-CRANKSHAFT (CHG -03 THRU -08)
STANDARD ENGINE ROTATION
Type 2

i00767462 SEBP3775

For full view, you need register

Parts for your G3606 GAS ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1588	[18]	BOLT (3/8-16X1.25-IN)
2.	1D-4601	[8]	BOLT (5/8-11X8.5-IN)
3.	1W-2823 C	[1]	SLEEVE
4.	1W-2824 C	[1]	RING-LOCK
5.	3V-3308	[18]	WASHER-HARD (10.2X20.5X2.5-MM THK)
6.	6V-5059	[2]	SEAL-O-RING
7.	190-2462	[1]	SEAL AS
			(IN FRONT HOUSING ON STANDARD ROTATION ENGINE & IN REAR HOUSING ON REVERSE ROTATION ENGINE)
8.	190-2463	[1]	SEAL AS
			(IN REAR HOUSING ON STANDARD ROTATION ENGINE & IN FRONT HOUSING ON REVERSE ROTATION ENGINE)
9.	102-4112 C	[1]	ADAPTER-CRANKSHAFT
10.	106-2033	[1]	ADAPTER-CRANKSHAFT
11.	160-8173	[2]	SLEEVE-WEAR
	C		CHANGE FROM PREVIOUS TYPE

Information:

BASIC ENGINE

CYLINDER HEAD GP

Engine News

Engine Valve Stem "Use Again" Specifications
1983/03/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26

A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01

Valve Lash Adjustment Interval Is Changed
1986/07/01

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01

Cylinder Head Stud Installation
1993/01/01

Prechamber Rust Removal
1993/07/01

New 9U-7511 Spark Plug Seat Cleaner And 9U-7516 Spark Plug Gauge Available{1555,1100}
1994/05/01

New Valve (Gas Admission) Has Chrome Plated Valve Stem{1100,1250}
1994/08/01

New Prechamber Assembly Used In Prechamber Group; New Specifications For Prechamber Group {1106}
1994/10/01

New Cylinder Head Group Has New Stronger Exhaust Valves{1105}
1994/11/01

New Stainless Steel Gaskets Used In Prechamber Group {1106}
1995/04/01

Valve Stem Projection Measuring Tools Available{0760,0767,1105}
1995/06/01

New Stainless Steel Prechamber Gaskets Not Affected By Cooling System Cleaner{1106,1350}
1995/06/01

New Cylinder Head And Cylinder Liner Gasket Kits Available{1124,1100,1216}
1995/06/01

New Check Valve Used In Prechamber Groups{1106,1250}
1995/11/20

New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19

Remanufactured Cylinder Head Groups Available{1100}
1996/04/15

Improvements To Check Valve Within Prechamber Group Reduce Maintenance Schedule{1106}
1996/06/12

New Technique To Remove Cylinder Head From Cylinder Block{1101,1201}
1996/07/22

New Rotocoil Assembly Used In Valve Rocker Arm Groups {1109}
1996/09/23

Cylinder Heads Are Serialized{1101}
1996/10/01

New Cylinder Head Group Used In Landfill Applications And In 11:1 Compression Ratio Engines{1100,1103,1105}
1996/11/01

Stronger Bolt Used In Prechamber Group{1106}
1996/12/18

Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22

Improved Combustion Gasket Provides Better Control Of Combustion Chamber Crevice Volume{1124}
1997/05/01

Installation Procedure For Cylinder Head Studs {1100}
1997/08/01

Spark Plug Seat Cleaner Recommended For Use On Cylinder Heads{1555}
1997/10/10

Water Cooled Pre-Chamber Insert Available{1103}
1997/10/10

New Exhaust Valve Used In Cylinder Head Groups{1105}
1998/03/01

New Gaskets In Prechamber Groups Help Prevent Coolant Leaks{1106}
1998/04/01

Troubleshooting Combustion Chamber Coolant Leaks In G3600 Engines{1106,1350}
1998/05/01

New Exhaust Valves Have Improved Resistance To Radial Cracking {1105}
1998/09/01

New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01

New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01

New Exhaust Valve Lash Setting For G3600 Engines In Landfill Applications{1105}
1998/12/01

Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1999/01/01

Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}
1999/02/01

New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}
1999/02/01

New Gaskets And Ignition Body Assembly Used In Prechamber Groups To Improve Sealing{1106}
1999/05/01

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25

Tolerance Added To Valve Clearance Specifications
1978/01/18

Use Again Specifications For Valve Springs Are Changed
1978/03/01

New Basic Cylinder Head Groups Include Premachined Valve Seat Inserts For Improved Reliability {1100}
2000/01/01

Oil Mister Pump And Lines Groups No Longer Used {1105, 1319}
2000/04/01

A New Taperlock Stud Is Used To Fasten The Cylinder Heads To The Cylinder Block {1100}
2001/01/01

New Cylinder Head Groups Will Provide Improved Reliability {1100, 1103, 1104}
2001/02/01

The New 187-6273 Machining Tool Group (G3600 Prechamber Assembly) Is Available {1106}
2001/02/01

Repair Procedure for the Threads in a Cylinder Head Casting that were Damaged by a Manual Valve Group (Kiene Valve) {1100}
2001/09/01

New Tools Are Available For Rebuilding The Cylinder Head {1100}
2002/04/01

New Tightening Procedure For The Bolts That Fasten The Prechamber Groups To The Cylinder Head {1106}
2002/05/01

A New Check Valve Assembly is Used in the Prechamber Groups {1106}
2005/12/19

New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
2003/03/01

A New Spark Plug Is Available For Use In Applications That Use Bio-Gas Fuel {1555}
2003/02/01

Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
2003/06/01

New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
2004/05/17

Improved Spacer for the Prechamber Group {1106}
2005/07/04

Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Correction to Disassembly and Assembly, "Cylinder Head - Remove" and "Cylinder Head - Install" {1100, 1100}
2005/11/07

207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05

The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
2011/11/21

A New Exhaust Valve is Used {1100, 1105}
2008/04/14

Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01

A New Prechamber and Gasket Are Available for Certain G3600 Engines {1106}
2013/06/03

Cat<SUP>®</SUP> Reman Now Offers New Prechamber Kits for Certain G3600 Engines {1106}
2014/09/26

A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}

Operation and Maintenance Manual

Valve Stem Projection - Measure/Record
G3606 and G3608 Engines

Gas Admission Valve Seals - Inspect/Replace
G3606 and G3608 Engines

Gas Admission Valve - Recondition
G3606 and G3608 Engines

Special Instruction

Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Service Letter-NACD

The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines

Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Exhaust Valve Chordal Failtures On Certain G3606, G3608, G3612, And G3616 Engines

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 0R9264 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES

PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES

Service Letter-Australia

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Service Letter-CFEL

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Service Letter-CSARL

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Service Letter-Americas

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Technical Information Bulletin

Lubricant For Gas Engines
Lubricant For Gas Engines

Specifications

Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
G3606 and G3608 Engines

Tool Operating Manual

126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}

4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}

Service Letter-China

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Service Letter-Asia

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Reuse And Salvage Guidelines

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Applied Failure Analysis

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Information Release Memo

CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS

Service Letter-APD

Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock
Inspect All 1117217, 1301066, 1483043, 1483056 And 0R4687 Cylinder Heads In Parts Stock

Disassembly and Assembly

Gas Admission Valve - Remove
G3606 and G3608 Engines

Gas Admission Valve - Disassemble
G3606 and G3608 Engines

Gas Admission Valve - Assemble
G3606 and G3608 Engines

Prechamber Ignition Body - Remove
G3606 and G3608 Engines

Cylinder Head - Disassemble
G3606 and G3608 Engines

Cylinder Head - Assemble
G3606 and G3608 Engines

Prechamber Check Valve - Remove and Install
G3606 and G3608 Engines

Gas Admission Valve - Install
G3606 and G3608 Engines

Prechamber Ignition Body - Install
G3606 and G3608 Engines

Cylinder Head - Remove
G3606 and G3608 Engines

Cylinder Head - Install
G3606 and G3608 Engines

Service Magazine

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Rocker Arm Assemblies Have New Inserts And Buttons{1123}
1990/04/23

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Prechamber Rust Removal{1106}
1993/07/19

New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30

128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27

Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23

Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23

Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface {1101}
1998/08/17

Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/11/23

Caterpillar Parts SIS Catalog G3606 :

218-3893 PRECHAMBER GP

117-4911 PRECHAMBER GP

110-5469 PRECHAMBER GP

7C-0416 PISTON GP

218-3907 PRECHAMBER GP

116-6965 PUMP GP-GEAR

219-9770 PUMP GP-GEAR

123-9211 RETAINER-ROCKER ARM

100-9979 ROCKER ARM GP

7C-0419 ROCKER ARM GP

7W-9683 SEAL GP-CRANKSHAFT

Truck sale:

Call

2000 CAT G3606

React Power Solutions
Houston, Texas

$260,000 USD

CATERPILLAR G3606 1998
- INDUSTRIAL
LOUISIANA CAT POWER SYSTEMS
5415 E. Broad St. - Lake Charles - Lou