AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3S-6224 PUMP GP-ELECTRIC HYDRAULIC (CHG -07, -08) G3608 GAS ENGINE


SERVICE EQUIPMENT AND SUPPLIES
TOOLS
PARTS GP-MISCELLANEOUS
BASIC ENGINE
PISTON & ROD GP
SERVICE EQUIPMENT AND SUPPLIES
TOOLS

GAS ENGINE G3608 GAS ENGINE 4WF
 G3608 GENERATOR AND INDUSTRIAL 4WF00001-UP SEBP3776 G3608 4WF   (1988)

SERVICE EQUIPMENT AND SUPPLIES

TOOLS
PULLER GP-CYLINDER LINER
6V-7073 PULLER GP-CYLINDER LINER
PULLER GP-VALVE SEAT
9U-5099 PULLER GP-VALVE SEAT
PUMP GP-ELECTRIC HYDRAULIC
3S-6224 PUMP GP-ELECTRIC HYDRAULIC
PUMP GP-HAND HYDRAULIC
9U-6600 PUMP GP-HAND HYDRAULIC
SUPPORT GP-PISTON
9U-5104 SUPPORT GP-PISTON
9U-5156 TOOL GP-CLEANING
 

#SEBP37761580
 

3S-6224: PUMP GP-ELECTRIC HYDRAULIC

3S-6224 PUMP GP-ELECTRIC HYDRAULIC (CHG -07, -08)
i00069308 SEBP3776
3S6224 PUMP GP-ELECTRIC HYDRAULIC Parts scheme
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2274 [1] MOTOR AS-CONTROL  
  2P-2276 [2] BRUSH AS-ELECTRIC  
  2P-2277 [1] GASKET  
  2P-2281 [1] RELAY  
  2P-2327 [1] SWITCH-TOGGLE  
2. 2P-2284 [1] VALVE AS-RELIEF  
3. 2P-2285 [1] GASKET-PLATE  
4. 2P-2283 [1] PUMP AS  
5. 2P-2286 [1] COUPLING  
6. 5P-7278 [1] SWITCH AS-REMOTE CONTROL  
  4C-4040 [1] SWITCH  
7. 5P-4234 [1] RESERVOIR  
8. 5P-4232 [1] CAP-FILLER VENT  
   
    AVAILABLE REPAIR KIT(S):
  1U-5556 [1] SCREEN  
  1U-9903 [1] KIT-VALVE REPAIR  
    (INCLUDES SEAL-O-RINGS & WASHERS)
  2P-2287 [1] KIT-VALVE  
    (INCLUDES SEAL-O-RINGS, SPRING WASHER, ROLL PIN, TEFLON WASHER & SPRING)
 

#SEBP37761581
 

9U-6600: PUMP GP-HAND HYDRAULIC

9U-6600 PUMP GP-HAND HYDRAULIC (CHG -02 THRU -04)
i00068678 SEBP3776
9U6600 PUMP GP-HAND HYDRAULIC Parts scheme
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-6588 [1] HOUSING-PUMP  
2. 9U-6589 [1] LINK-PUMP  
3. 9U-6590 [1] SEAL-O-RING  
4. 9U-6591 [1] DISC-PIVOT  
5. 9U-6592 [1] PISTON  
6. 9U-6593 [1] PLUNGER  
7. 9U-6594 [1] BODY-PUMP  
8. 9U-6596 [1] FILTER ELEMENT-OIL  
9. 9U-6597 [1] PISTON  
10. 4C-4859 [1] BEAM  
11. 4C-4854 [1] VALVE-RELIEF  
12. 8T-5342 [1] GAUGE-PRESSURE  
13. 9U-6602 [1] FILTER ELEMENT-OIL  
14. 9U-6603 [1] TUBE AS  
15. 9U-6604 [1] TUBE AS  
16. 9U-6605 [1] HANDLE-VALVE  
17. 9U-6606 [1] VALVE  
18. 5P-3584 [1] NUT (1-1/8-20-THD)  
   
    AVAILABLE REPAIR KIT(S):
  4C-4861 [1] KIT-HOOK ASSEMBLY  
    (INCLUDES PIN, WASHERS,BRACKET & HOOK)
  4C-4863 [1] KIT-FILL PLUG  
    (INCLUDES COCK-DRAIN,DECAL,PLUG-FILL & SEAL-O-RING)
  4C-4866 [1] KIT-VALVE SERVICE  
    (INCLUDES BALL,SPRINGS, PINS,SEALS, RINGS & GASKET)
  4C-4867 [1] KIT-VALVE SHEAR  
    (INCLUDES DISC, BALL, PIN,SPRING, SEAL & VALVE AS)
  9U-6607 [1] KIT-PUMP SERVICE  
    (INCLUDES RINGS, SEALS, NUTS,GASKETS, SPRINGS, BALLS,PLUGS, FILTERS, SEATS,SLEEVE & CAP)
  9U-6608 [1] KIT-PIN SERVICE  
    (INCLUDES PINS & RINGS)
 

#SEBP37761582
 

137-8533: SHIM PACK

137-8533 SHIM PACK -GENERATOR (CHG -00, -01)
FOR USE WITH ALIGNMENT OF GENERATOR AND INDUSTRIAL PACKAGES
i00508760 SEBP3776
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  137-8534 B [1] SHIM (0.025-MM THK)  
  137-8535 B [1] SHIM (0.0508-MM THK)  
  137-8536 B [1] SHIM (0.076-MM THK)  
  137-8537 B [1] SHIM (0.102-MM THK)  
  137-8538 B [1] SHIM (0.127-MM THK)  
  137-8539 B [1] SHIM (0.254-MM THK)  
  137-8540 B [1] SHIM (0.381-MM THK)  
  137-8541 B [1] SHIM (0.508-MM THK)  
  137-8542 B [1] SHIM (0.635-MM THK)  
  137-8543 B [1] SHIM (1.27-MM THK)  
  137-8544 B [1] SHIM (1.91-MM THK)  
  137-8545 B [1] SHIM (2.54-MM THK)  
  137-8546 B [1] SHIM (3.05-MM THK)  
  331-6585 B [1] SHIM (0.25-IN THK)  
  B   USE AS REQUIRED
 

#SEBP37761583
 

9U-5104: SUPPORT GP-PISTON

9U-5104 SUPPORT GP-PISTON (CHG -00)
PART OF 9U-5107 TOOL GP-SPARK IGNITED ENGINE
i00178619 SEBP3776
9U5104 SUPPORT GP-PISTON Parts scheme
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT (3/8-16X3-IN)  
2. 2J-5245 [1] BOLT (3/8-16X1.25-IN)  
 

#SEBP37761584
 

9U-5156: TOOL GP-CLEANING

9U-5156 TOOL GP-CLEANING (CHG -02)
3600 PRECHAMBER SEAT
PART OF 9U-5107 TOOL GP-SPARK IGNITED ENGINE
i00178653 SEBP3776
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1U-5516 [4] DISC  
  1U-5519 [1] HOLDER  
  1U-9023 [1] PILOT AS-CLEANING  
 

#SEBP37761585
 

9U-6249: TOOL GP-CYLINDER

9U-6249 TOOL GP-CYLINDER (CHG -00 THRU -02)
i00068677 SEBP3776
9U6249 TOOL GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4C-9658 [1] CASE AS-TOOL  
2. 9U-6685 [1] BLOCK-FOAM  
3. 126-8290 [1] WRENCH-SPANNER  
4. 1U-7566 [1] WRENCH (8-MM)  
5. 5P-5247 J [1] PULLER AS-HYDRAULIC  
  1P-2375 [1] COUPLER AS-QUICK CONNECT  
  4J-5268 [1] SEAL-O-RING  
  1P-7437 [1] CAP-PROTECTION  
6. 9U-6256 [1] PLUG-END  
7. 1D-4614 [1] BOLT (3/4-10X5-IN)  
8. 1D-5119 [1] NUT (3/4-10-THD)  
9. 9U-6255 J [1] TOOL GP-TURBOCHARGER  
  1P-2375 [2] COUPLER AS-QUICK CONNECT  
    (EACH INCLUDES)
  4J-5268 [1] SEAL-O-RING  
  9U-6257 [1] TEE-FITTING  
  9U-6258 [1] NIPPLE-PIPE  
  096-6100 [1] SEAL-O-RING  
10. 9U-6686 [1] BLOCK-FOAM  
11. 1U-7564 [1] WRENCH (5-MM)  
12. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
13. 096-6100 [2] SEAL-O-RING  
14. 1P-7437 [2] CAP-PROTECTION  
15. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
   
    AVAILABLE REPAIR KIT(S):
  5P-5248 KIT-PULLER SEAL  
    (INCLUDES SEALS, SEAL-O-RING & WASHER)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP37761586
 

9U-5100: TOOL GP-CYLINDER HEAD REPAIR

9U-5100 TOOL GP-CYLINDER HEAD REPAIR (CHG -00, -01)
i00068971 SEBP3776
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-2660 Y [1] COMPRESSOR GP-VALVE SPRING  
  8T-2676 [1] DRIVER AS-VALVE GUIDE  
  4C-8540 [1] DRIVER-DOWEL  
  8T-2674 [1] DRIVER-VALVE SEAT  
  8T-2781 [1] PEDESTAL-VALVE GUIDE SUPPORT  
  9U-5099 Y [1] PULLER GP-VALVE SEAT  
  4C-9839 [1] RETAINER TOOL-PULLER ROD  
  8T-2679 [1] ROD AS  
  4C-8731 [1] ROD  
  8T-2673 [1] SLEEVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37761587
 

9U-7522: TOOL GP-CYLINDER HEAD REPAIR

9U-7522 TOOL GP-CYLINDER HEAD REPAIR (CHG -00, -01)
i00068679 SEBP3776
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-2660 Y [1] COMPRESSOR GP-VALVE SPRING  
  8T-2676 [1] DRIVER AS-VALVE GUIDE  
  4C-8540 [1] DRIVER-DOWEL  
  8T-2674 [1] DRIVER-VALVE SEAT  
  9U-6399 [1] GAUGE-VALVE GUIDE INSTALLATION  
  9U-6401 [1] GAUGE-VALVE GUIDE WEAR  
  8T-2781 [1] PEDESTAL-VALVE GUIDE SUPPORT  
  130-1449 [1] PULLER GP-VALVE SEAT  
  4C-9839 [1] RETAINER TOOL-PULLER ROD  
  4C-8731 [1] ROD  
  8T-2679 [1] ROD AS  
  8T-2673 [1] SLEEVE (STOP)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37761588
 

8T-2850: TOOL GP-DIESEL COMBINATION

8T-2850 TOOL GP-DIESEL COMBINATION (CHG -10, -11)
i00068969 SEBP3776
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9U-5106 Y [1] TOOL GP-DIESEL ENGINE  
  9U-5105 Y [1] TOOL GP-ENGINE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37761589
 

9U-5106: TOOL GP-DIESEL ENGINE

9U-5106 TOOL GP-DIESEL ENGINE (CHG -00 THRU -05)
PART OF 8T-2850 TOOL GP-DIESEL COMBINATION
i01048020 SEBP3776
  For full view, you need register

Parts for your G3608 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1U-8795 [1] ARM-GOVERNOR TORQUE  
  8T-3268 [2] BOLT-SPECIAL  
  130-6993 [1] BRUSH-INJECTOR SEAT CLEANING  
  4C-5719 [1] COMPRESSOR GP-PISTON RING  
  8T-3033 [1] EXPANDER GP-PISTON RING  
    -OR-
  271-0505 [1] EXPANDER GP-RING  
  9U-5932 [1] EXTENSION-TORQUE WRENCH  
  6V-7073 Y [1] PULLER GP-CYLINDER LINER  
  4C-6594 Y [1] TOOL GP-TIMING & FUEL SETTING  
  5P-0328 [1] WRENCH-CROWFOOT (7/8X3/8-IN DRIVE)(DOUBLE HEX)  
  5P-0329 [1] WRENCH-CROWFOOT (15/16X3/8-IN DRIVE)(DOUBLE HEX)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/05/14
6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines
1981/01/28
Changes Have Been Made To Caterpillar Service Literature
1981/03/04
Instruction Cards For "Go-No Go" Gauges Now Available
1981/07/01
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Use The 6V6059 Microlite With The 6V2196 Inspection Microscope
1982/04/07
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Separate Valve Stem Gauges Available
1982/08/25
Dial Bore Gauge And Size Setting Fixture Available
1982/09/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/15
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27
Hunting Down The Cheaters
1985/06/01
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems
1987/05/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Fluid Sampling Tools For Nonpressurized Compartments
1988/03/01
Extraction Tools For "Live Oil Sampling"
1988/05/01
New Service Tools Available
1988/10/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
FT2397 Extension Cable Used To Connect 5P6584 Or 9U5358 Timing Light In Ignition Circuit
1992/10/01
New Exhaust Temperature Thermocouple Used
1993/02/01
Valve Stem Projection Measuring Tools Available{0760,0767,1105}
1995/06/01
New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19
Fabricated Spark Plug Gapping Tool {0766,1555}
1998/09/01
New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01
New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01
Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance{1000,1000,0701}
1999/01/01
Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1999/01/01
Use 145-0316 Cleaning Kit For Gas Engine 2-Stage After Coolers{1350}
1999/01/01
Use 146-2727 Tool Group To Monitor And Check Engine Performance On 3600 Engines {1000}
1999/03/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
A New Threaded Collar Is Used In The Stud Tensioner Tool Group {0601, 0602}
2001/10/01
A New Hose Assembly That Is Made From Stainless Steel Is Used In The Turbocharger Cleaner Groups {1052}
2001/09/01
The Content Of The 9U-5105 Basic Engine Tool Group Has Changed {0701}
2001/11/01
A Replacement Insert For The Spark Plug Socket Is Available {0701, 0712}
2002/03/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
New Tools Are Available For Rebuilding The Cylinder Head {1100}
2002/04/01
New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
2004/05/01
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
2006/07/03
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
G3606 and G3608 Engines
Special Instruction
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U6602 Photo-Tach Group{0775}
Using the 1U6602 Photo-Tach Group{0775}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Test and Repair Procedures for 8T0895 Stud Tensioner Cylinder Group and 6V7047 and 5P5247 Hydraulic Puller Assemblies{1000}
Test and Repair Procedures for 8T0895 Stud Tensioner Cylinder Group and 6V7047 and 5P5247 Hydraulic Puller Assemblies{1000}
8T0820 Pressure Gage Service/Repair{0770}
8T0820 Pressure Gage Service/Repair{0770}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Test and Repair Procedures for 3S6224 and 8S8033 Hydraulic Pump Groups{0616}
Test and Repair Procedures for 3S6224 and 8S8033 Hydraulic Pump Groups{0616}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using The 6V7899 Size Setting Fixture Group{651}
Using The 6V7899 Size Setting Fixture Group{651}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-NACD
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Service Letter-Australia
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Service Letter-CFEL
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Service Letter-CSARL
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Service Letter-Americas
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Service Letter-Brazil
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Service Letter-Truck/Ag/Marine
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
Technical Information Bulletin
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
9U6958 Magneto Peak Detect Module{1552, 0712, 0781}
9U6958 Magneto Peak Detect Module{1552, 0712, 0781}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Service Letter-China
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Service Letter-Asia
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Reuse And Salvage Guidelines
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Shop Review
Engine Component Racks
Engine Component Racks
Engine Stands
Engine Stands
Service Letter-APD
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A THREADED COLLAR USED IN THE 2095034 STUD TENSIONER TOOL GROUP
Bench Test Procedures
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Petroleum Gas Compression Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Petroleum Gas Compression Engine {0372, 1000, 7000, 753S, 7565}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Use Gas Detector Tubes That Have Expired Dates To &quot;Break In&quot; The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Temperature Regulators; Regulator Service Hours Changed{1330,0770,1355,7527,7543}
1990/10/15
128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23
Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23
Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance {1000,1000,0701}
1998/08/17
Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/11/23
New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/05
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/03/29
Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/03/29
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog G3608 :

PULLER GP-VALVE SEAT
9U-5099 PULLER GP-VALVE SEAT
PULLER GP-CYLINDER LINER
6V-7073 PULLER GP-CYLINDER LINER
PULLER GP-CYLINDER LINER
4C-8568 PULLER GP-CYLINDER LINER
PULLER GP-CYLINDER LINER
4C-8567 PULLER GP-CYLINDER LINER
PULLER GP-CYLINDER LINER
1U-7618 PULLER GP-CYLINDER LINER
PRESERVATION GP
126-7249 PRESERVATION GP
115-5852 PLATE & FILM GP
453-3535 KIT-VALVE
PUMP GP-HAND HYDRAULIC
9U-6600 PUMP GP-HAND HYDRAULIC
137-8533 SHIM PACK
SUPPORT GP-PISTON
9U-5104 SUPPORT GP-PISTON
9U-5156 TOOL GP-CLEANING
TOOL GP-CYLINDER
9U-6249 TOOL GP-CYLINDER
9U-5100 TOOL GP-CYLINDER HEAD REPAIR
9U-7522 TOOL GP-CYLINDER HEAD REPAIR
8T-2850 TOOL GP-DIESEL COMBINATION

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.