AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3E-8640 CONTROL GP-ENGINE ELECTRONIC (CHG -04 THRU -06) TIMING CONTROL MODULE PART OF 108-1809, 108-8363, 109-1292, 129-1317, 130-6515, 131-1946, 7C-6855 PANEL GP-CONTROL Type 1 G3616


ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE

GAS ENGINE G3616 GAS ENGINE 4CG
 G3616 GENERATOR AND INDUSTRIAL 4CG00001-UP SEBP3778 G3616 4CG   (1992)

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-ENGINE
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-9190 CONTROL GP-ENGINE ELECTRONIC
 

#SEBP37781190
 

3E-8640: CONTROL GP-ENGINE ELECTRONIC

3E-8640 CONTROL GP-ENGINE ELECTRONIC (CHG -04 THRU -06)
TIMING CONTROL MODULE
PART OF 108-1809, 108-8363, 109-1292, 129-1317, 130-6515, 131-1946, 7C-6855 PANEL GP-CONTROL
Type 1
i00068384 SEBP3778
3E8640 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-3099 Y [1] CONTROL GP-ENGINE ELECTRONIC (GAS TIMING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37781191
 

3E-8640: CONTROL GP-ENGINE ELECTRONIC

3E-8640 CONTROL GP-ENGINE ELECTRONIC (CHG -07)
TIMING CONTROL MODULE
PART OF 109-1292, 129-1317, 130-6515, 131-1946 PANEL GP-CONTROL
Type 2
i01097408 SEBP3778
3E8640 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-0418 Y [1] CONTROL GP-ENGINE ELECTRONIC (GAS TIMING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37781192
 

3E-8640: CONTROL GP-ENGINE ELECTRONIC

3E-8640 CONTROL GP-ENGINE ELECTRONIC (CHG -08)
TIMING CONTROL MODULE
PART OF 109-1292, 129-1317, 130-6515, 131-1946, 197-4936, 198-9153 PANEL GP-CONTROL
i01351830 SEBP3778
3E8640 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-4944 CY [1] CONTROL GP-ELECTRONIC (GAS TIMING)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP37781193
 

3E-9190: CONTROL GP-ENGINE ELECTRONIC

3E-9190 CONTROL GP-ENGINE ELECTRONIC (CHG -00)
PART OF 3E-9189 SENSOR GP-PRESSURE
i01256472 SEBP3778
3E9190 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] BOARD GP-CIRCUIT  
2. 8T-3993 [2] CLAMP-HOSE  
3. 9X-2480 M [4] BOLT (M6X1X45-MM)  
4. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
6. 5P-5992 BD [1] HOSE  
7. 6L-7158 [4] SCREW-MACHINE (6-32X0.875-IN)  
8. 9X-3449 [4] GROMMET  
9. 6V-6609 [1] SEAL-O-RING  
10. 1P-4001 [1] FITTING  
11. 096-3944 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37781194
 

3E-9202: CONTROL GP-ENGINE ELECTRONIC

3E-9202 CONTROL GP-ENGINE ELECTRONIC (CHG -00 THRU -04)
PART OF 3E-6351 CONTROL GP-ENGINE ELECTRONIC
REPLACED BY @@@@@108-5888@@@@@
i00068393 SEBP3778
3E9202 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-0379 [1] FILM-IDENTIFICATION (ENGINE CONTROL MODULE)  
 

#SEBP37781195
 

3E-9333: CONTROL GP-ENGINE ELECTRONIC

3E-9333 CONTROL GP-ENGINE ELECTRONIC (CHG -00 THRU -02)
STATUS CONTROL MODULE
PART OF 3E-9332 CONTROL GP-ENGINE MONITORING
FIELD REPLACEMENT FOR @@@@@ 3E-9332@@@@@
i00068396 SEBP3778
3E9333 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2236 [1] FILM-IDENTIFICATION  
2. 3E-2165 Y [1] CONTROL GP-ENGINE MONITORING  
3. 6V-1541 [1] PRIMER-QUICK CURE (PUMP BOTTLE)  
4. 6V-6640 B SEALANT  
5. 9W-1464 [4] SCREW (1/4-20X1-IN)  
6. 6D-3897 [10] BOLT (8-32X0.5-IN)  
  6V-9499 [10] WASHER-HARD (4.3X7X0.8-MM THK)  
7. 9S-8002 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP37781196
 

3E-9373: CONTROL GP-ENGINE ELECTRONIC

3E-9373 CONTROL GP-ENGINE ELECTRONIC (CHG -00 THRU -03)
TIMING-CSA
PART OF 3E-8640 CONTROL GP-ENGINE ELECTRONIC
i00068399 SEBP3778
3E9373 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2098 [1] FILM-IDENTIFICATION (TIMING)  
 

#SEBP37781197
 

9X-9683: CONTROL GP-ENGINE ELECTRONIC

9X-9683 CONTROL GP-ENGINE ELECTRONIC (CHG -00 THRU -02)
PART OF 9X-9685 CONTROL GP-ENGINE MONITORING
i00068696 SEBP3778
9X9683 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-3018 [1] BOX AS  
  9X-6442 E SEAL  
2. 7N-7792 [1] PLUG AS-CONNECTOR (30-PIN)  
3. 8N-1525 [1] PLUG AS-CONNECTOR (20-PIN)  
4. 8N-1514 [1] PLUG AS-CONNECTOR (37-PIN)  
5. 3E-0105 [6] MOUNT  
  8L-8413 [6] STRAP-CABLE (WHITE)  
6. 2H-8533 [15] SCREW-MACHINE (10-32X0.25-IN)  
  2W-5907 [15] WASHER (5.16X11.13X0.81-MM THK)  
7. 8T-8732 [2] RECEPTACLE-CONNECTOR (3-PIN)  
8. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 3E-1829 [2] DUCT (SLOTTED)  
  3E-1830 [2] COVER  
10. 3E-7992 [6] FUSE (30-AMPERE)  
11. 3E-3401 [1] DUCT  
  3E-3402 [1] COVER  
12. 3E-3616 [1] RELAY AS (12-VOLT)  
13. 9X-9675 [12] BRACKET-END  
14. 9X-9673 [10] CONNECTOR (BLOCK)  
15. 9X-9612 [1] COVER (SPACER)  
16. 9X-9674 [20] TERMINAL  
17. 9X-9613 [1] SPACER (50-MM LGX2.5-MM THK)  
18. 9X-9677 [1] COVER-END  
19. 9X-9676 [98] TERMINAL  
20. 3E-2283 [1] BRIDGE-INSERTION  
21. 3E-2286 [8] STRIP-CONTACT (BRIDGE)  
22. 3E-2282 [2] BRIDGE-INSERTION  
23. 3E-2284 [1] BRIDGE-INSERTION  
24. 9X-9614 [4] TERMINAL (SINGLE)  
25. 9X-9616 [3] COVER-END  
26. 9X-9615 [21] TERMINAL (SINGLE)  
27. 3E-3566 [2] BRIDGE-INSERTION  
28. 3E-3565 [1] BRIDGE-INSERTION  
29. 3E-0355 [1] BLOCK-FUSE  
30. 9G-3695 [3] PLUG-SEAL  
31. 7N-7779 [54] SOCKET-CONNECTOR (14-GA TO 18-GA)  
32. 3E-6368 [3] MODULE-RELAY  
33. 087-0546 [2] RELAY (24-VOLT)  
34. 9X-6987 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
35. 6K-3274 [4] PLATE-RIVET  
  2S-6251 [4] SCREW (4-40X0.75-IN)  
  6B-4540 [4] NUT (4-40-THD)  
  9X-8551 BE CABLE-ELECTRICAL (16-GA)  
  4G-2556 BE CABLE-SHIELDED (16-GA)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  5P-5689 BD WIRE (8-GA, BLACK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP37781198
 

159-8935: CONTROL GP-GAS PRESSURE

159-8935 CONTROL GP-GAS PRESSURE (CHG -00 THRU -03)
PART OF 159-9009 CONTROL GP-GAS PRESSURE
i01239059 SEBP3778
1598935 CONTROL GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP37781199
 

159-9009: CONTROL GP-GAS PRESSURE

159-9009 CONTROL GP-GAS PRESSURE (CHG -00, -01)
GAS PRESSURE MODULE
PART OF 125-3875 WIRING GP-ENGINE
Type 1
i00828199 SEBP3778
1599009 CONTROL GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3616 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-8935 Y [1] CONTROL GP-GAS PRESSURE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Engine News
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
4C6710 Governor Test Unit Group Is Available For 3600 Engines with Heinzmann Governors
1991/05/01
New Components Used In Electronic Sensor And Mounting Group (Combustion Buffer) And Electronic Control Group (Combustion Sensor) To Reduce Electrical Noise{1559}
1995/10/01
Improved Gas And Air Pressure Module{1901}
1998/06/01
Personality Module Alarm And Shutdown Settings {1902}
1998/11/01
New Caterpillar Ignition System (CIS) Electronic Control Groups Include Improved Door Sealing And Some Serviceable Parts{1550}
1999/05/01
New Electronic Control (Detonation Mixing Control Module) Eliminates Erroneous Shutdown Codes {1901}
2000/01/01
Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
2000/01/01
New Control Strategy Improvements For G3600 Engines {1900}
2000/02/01
Solenoid Available To Service Hydrax Actuators {1259}
2000/02/01
New Time Delay Relay Used In The Engine Supervisory System (ESS) {7490}
2000/09/01
New Timing Control Module Used {1900, 1901}
2000/07/01
Electronic Control Modules and Computer Viruses {7620}
2001/06/01
New Hydrax Electronic Control Is Available {1900}
2001/07/01
Understanding The "Engine Load" Display That Is A Part Of The Engine Supervisory System (ESS) {1900}
2002/03/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
Do Not Order an Unprogrammed Personality Module {1902}
2010/09/22
A New Personality Module is Available for G3600 Engines {1902, 7620}
2003/06/01
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
The New Low Gas Pressure Module is Now Available {1901}
2005/12/19
New Software is Used {1902, 7620}
2006/12/25
Use the Latest Version of Caterpillar Electronic Technician (ET) for Prechamber Calibration {1278, 7620}
2007/07/09
Update on the Factory Password System {1901, 7620}
2008/02/18
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 1900, 7610}
2008/05/26
Do Not Adjust the Desired Speed During a Normal Stop for a Gas Engine with an ADEM 3 Control Module {1901, 1920}
2009/04/13
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/02/15
Temperature Display Issue Resolved in the Latest Version of Caterpillar Electronic Technician (Cat <SUP>&reg;</SUP> ET) for G3600 Engines {0785, 1901}
2013/11/25
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New Software Is Now Used on Certain G3600 Generator Set Engines {1920}
New Software Is Now Used on Certain G3600 Generator Set Engines {1920}
New Operator Control Panel (OCP) 4.3 Software is Now Used for Certain Engines {1920, 7490}
New Operator Control Panel (OCP) 4.3 Software is Now Used for Certain Engines {1920, 7490}
Operation and Maintenance Manual
Engine Protective Devices - Check
G3612 and G3616 Engines
Ignition Systems
G3612 and G3616 Engines
Cold Weather Starting
G3612 and G3616 Engines
Special Instruction
Installation Of 132-5560 Remote Speed Control Kit{1915, 1900}
Installation Of 132-5560 Remote Speed Control Kit{1915, 1900}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Procedure For Replacing The Software For The Timing Control Module{1901}
Procedure For Replacing The Software For The Timing Control Module{1901}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Using the Map Adjustment Feature{1901, 1902, 7620}
Using the Map Adjustment Feature{1901, 1902, 7620}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Letter-NACD
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-Australia
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-CFEL
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-CSARL
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-Americas
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Technical Information Bulletin
Status Control Module (SCM) Problem
Status Control Module (SCM) Problem
Status Control Module
Status Control Module
New ECM Hardware and Software for G3600A+ Engine.
New ECM Hardware and Software for G3600A+ Engine.
Service Letter-China
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Service Letter-Asia
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Systems Operation
Engine Supervisory System
G3612 and G3616 Engines
Engine Supervisory System
G3612 and G3616 Engines
Service Letter-APD
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Installing Improved Software On Certain G3606, G3608, G3612 And G3616 Gas Engines Equipped With Computerized Monitoring System (CMS)
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
Product Support Program For Replacing The Detonation Mixing Control On Certain G3606, G3608, G3612, And G3616 Engines
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN G3606, G3608, G3612, AND G3616 GAS ENGINES
Testing and Adjusting
Status Control Module Service Procedure
G3612 and G3616 Engines
Status Control Module Service Procedure
G3612 and G3616 Engines
Disassembly and Assembly
Caterpillar Ignition System (CIS) Module - Remove and Install
G3612 and G3616 Engines
Service Magazine
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2004/03/01
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}

Caterpillar Parts SIS Catalog G3616 :

CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-7305 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-7305 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-6352 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-6351 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-6351 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-6351 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-8640 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-9190 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-9202 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-9333 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
3E-9373 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9X-9683 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-GAS PRESSURE
159-8935 CONTROL GP-GAS PRESSURE

Truck sale:

CATERPILLAR G3616 1997
 
CATERPILLAR G3616 1997
- STATIONARY GENERATOR SETS
MACALLISTER MACHINERY
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.