AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

194-6637 VALVE GP-EXPLOSION RELIEF (CHG -00, -01) 3606 GEN SET ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
VALVE GP-MANUAL

GEN SET ENGINE 3606 GEN SET ENGINE 8RB
 3606 GENERATOR, INDUSTRIAL, LOCOMOTIVE, AND MARINE 8RB00001-UP SEBP3779 3606 8RB   (1986)

BASIC ENGINE

CYLINDER BLOCK GP
150-5145 KIT-LINER GASKET
LINER-CYLINDER BLOCK
111-1656 LINER-CYLINDER BLOCK
VALVE GP-EXPLOSION RELIEF
194-6637 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
1W-3645 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
1W-3645 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
360-2833 VALVE GP-EXPLOSION RELIEF
 

#SEBP37791030
 

194-6637: VALVE GP-EXPLOSION RELIEF

194-6637 VALVE GP-EXPLOSION RELIEF (CHG -00, -01)
i01428150 SEBP3779
1946637 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4545 [1] SEAL-O-RING (CRANKCASE COVER)  
2. 6V-1904 [1] SEAL-O-RING  
3. 7E-0769 [1] COVER-CYLINDER BLOCK  
4. 152-4484 [1] BOLT-GUIDE  
5. 155-8288 [1] COVER-PROTECTION  
6. 155-8289 [1] VALVE  
7. 155-8328 [1] SEAL-O-RING (CRANKCASE COVER)  
8. 155-8329 [1] SPRING-VALVE  
9. 163-1073 [1] SEAL-O-RING  
10. 194-5878 [1] ADAPTER  
11. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
12. 2J-5245 [6] BOLT (3/8-16X1.25-IN)  
13. 3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
14. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 5P-8246 [1] WASHER-HARD (15.5X29X3-MM THK)  
16. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP37791031
 

1W-3645: VALVE GP-EXPLOSION RELIEF

1W-3645 VALVE GP-EXPLOSION RELIEF (CHG -04 THRU -07)
i00068993 SEBP3779
1W3645 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2834 J [1] VALVE GP-EXPLOSION RELIEF  
2. 9S-8752 [6] NUT-FULL (3/8-16-THD)  
3. 3V-3308 [14] WASHER-HARD (10.2X20.5X2.5-MM THK)  
4. 8T-0115 [1] SEAL-O-RING  
5. 9Y-7081 [2] GASKET  
6. 1W-1417 [1] FLANGE AS  
7. 1W-0126 [1] COVER-BLOCK SIDE  
8. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  2W-3584 J [1] KIT-REPAIR (EXPLOSION RELIEF)  
    (INCLUDES VALVE, PLATE & SPINDLE)
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
 

#SEBP37791032
 

1W-3645: VALVE GP-EXPLOSION RELIEF

1W-3645 VALVE GP-EXPLOSION RELIEF (CHG -08 THRU -10, -10D1)
i00067616 SEBP3779
1W3645 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2834 J [1] VALVE GP-EXPLOSION RELIEF  
2. 0S-1588 C [6] BOLT (3/8-16X1.25-IN)  
3. 3V-3308 [14] WASHER-HARD (10.2X20.5X2.5-MM THK)  
4. 6I-4545 [1] SEAL-O-RING  
5. 6V-1904 C [1] SEAL-O-RING  
7. 7E-0769 C [1] COVER-CYLINDER BLOCK  
8. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  2W-3584 J KIT-REPAIR (EXPLOSION RELIEF)  
    (INCLUDES PLATE,SPINDLE & VALVE)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP37791033
 

360-2833: VALVE GP-EXPLOSION RELIEF

360-2833 VALVE GP-EXPLOSION RELIEF (CHG -00 THRU -03)
PART OF 366-5400 VALVE GP-EXPLOSION RELIEF
i04634396 SEBP3779
3602833 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 360-2830 J [1] COVER-CYLINDER BLOCK  
   
    AVAILABLE REPAIR KIT(S):
  366-4931 J [1] KIT-RELIEF VALVE  
    (INCLUDES VALVE PLATE & SPINDLE O-RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP37791034
 

366-5400: VALVE GP-EXPLOSION RELIEF

366-5400 VALVE GP-EXPLOSION RELIEF (CHG -00, -00D1)
i04631513 SEBP3779
3665400 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4545 [1] SEAL-O-RING  
2. 360-2833 Y [1] VALVE GP-EXPLOSION RELIEF (CRANKCASE)  
3. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
4. 3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37791035
 

385-3820: VALVE GP-EXPLOSION RELIEF

385-3820 VALVE GP-EXPLOSION RELIEF (CHG -00, -01)
i05094170 SEBP3779
3853820 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4545 [1] SEAL-O-RING  
2. 370-4569 [1] COVER-CYLINDER BLOCK  
3. 382-6662 [1] VALVE GP-EXPLOSION RELIEF  
4. 165-3929 [8] BOLT (3/8-16X1.5-IN)  
5. 1S-4974 [1] SEAL-O-RING  
6. 3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
7. 8T-9378 [6] BOLT (3/8-16X4-IN)  
8. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP37791036
 

139-1460: VALVE GP-MANUAL

139-1460 VALVE GP-MANUAL (CHG -00, -00D1)
i00068278 SEBP3779
1391460 VALVE GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-2709 [1] ADAPTER  
2. 7E-2492 [1] VALVE AS  
3. 7W-2656 [1] CAP  
4. 7W-6734 [1] COUPLING  
 

#SEBP37791037
 

197-5805: VALVE GP-MANUAL

197-5805 VALVE GP-MANUAL (CHG -01, -02, -02D1, -02D2, -02D3, -02D4, -02D5, -02D6, -02D7, -02D8, -03, -03D4)
i01986388 SEBP3779
1975805 VALVE GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-5807 [1] INDICATOR AS  
  5B-9246 [1] GASKET  
  197-5808 [1] INDICATOR-VALVE  
  208-3899 [1] ADAPTER  
2. 229-5415 C [1] SHIELD AS-HEAT  
3. 229-5417 C [1] SHIELD AS-HEAT  
4. 138-3331 CD WIRE-TIE (4-M)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP37791038
 

4W-7036: VALVE GP-MANUAL

4W-7036 VALVE GP-MANUAL (CHG -00 THRU -02)
CYLINDER PRESSURE MEASURE
Type 1
i00069502 SEBP3779
4W7036 VALVE GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2655 [1] VALVE  
2. 7C-7077 [1] VALVE  
3. 7W-2654 [1] ADAPTER-VALVE  
4. 7W-8617 [1] GASKET  
5. 7W-2656 [1] CAP  
 

#SEBP37791039
 

4W-7036: VALVE GP-MANUAL

4W-7036 VALVE GP-MANUAL (CHG -03, -04)
CYLINDER PRESSURE MEASURE
Type 2
i00068477 SEBP3779
4W7036 VALVE GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2415 [1] ADAPTER-VALVE  
2. 7W-2655 [1] VALVE  
3. 7W-6734 [1] COUPLING  
4. 7W-2656 [1] CAP  
5. 2H-1650 [1] WASHER (0.06-IN THK)  
6. 9Y-3200 [1] GASKET  
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Improved Gaskets Used In Central Structure Cover Groups, Jacket Water Lines Groups, Jacket Water Heater Groups And Water Aftercooler Groups
1987/08/01
Valve Kit Available For Explosion Relief Valve
1989/01/01
Cylinder Liner Changes
1989/11/01
New Crankcase Side Cover Use With Centrifugal Oil Filter Group
1990/05/01
Improved Main Bearing Stud Nut And Cylinder Head Nut Used
1990/08/01
New Main Bearing Part Number
1993/08/01
Main Bearing Cap Installation Procedure{1203}
1995/06/01
New Crankshaft Main Bearing Installation Procedure{1203}
1995/08/01
New Main Bearing Provides Improved Oil Distribution {1203}
1996/01/17
New Cylinder Liner And Cylinder Liner Sleeve Help Prevent Carbon Buildup Around Piston Top Land{1216}
1996/02/16
New Technique To Remove Cylinder Head From Cylinder Block{1101,1201}
1996/07/22
Guidelines For Reusability Of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, And Connecting Rod Cap Bolts And Nuts{1100,1218,1230}
1997/01/22
Procedure For Disassembly And Assembly Of The Pressure Relief Valve{1233}
1997/09/15
Cylinder Sleeve (Cuff) Reusability{1216}
1998/04/01
New Main Bearing Studs With Oversize Thread Available {1224}
1998/07/01
New Main Bearing Used {1203}
1998/08/01
New Cylinder Liner Sleeve Used {1216}
1998/09/01
Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Disassembly And Assembly Of Main Bearings For Journals Without Oil Holes {1203}
2000/01/01
A New Cylinder Liner And A New Combustion Gasket Are Used {1216, 7555}
2005/06/20
A New Special Publication, LEBV1912, "Caterpillar 3600 Diesel Engine Single Cylinder Overhaul Procedure" Is Available {1000, 1223}
2002/03/01
A New Cylinder Liner Is Available {1216}
2002/04/01
The 151-7417 Engine Liner Hone Is Available {1216}
2002/05/01
New Gasket For The Cylinder Block Cover {1201}
2003/11/01
Improved Pistons Are Used for Certain 3600 and C280 Engines {1214, 1216}
2013/07/24
New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
2004/05/17
Revised Special Instruction, REHS2115, "Requirements for Installation of the 197-6700 Piston " is Available {1214, 1216}
2005/10/31
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01
Operation and Maintenance Manual
Cylinders - Inspect
3600 Heavy Fuel Engines
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Test and Repair Procedures for 8T0895 Stud Tensioner Cylinder Group and 6V7047 and 5P5247 Hydraulic Puller Assemblies{1000}
Test and Repair Procedures for 8T0895 Stud Tensioner Cylinder Group and 6V7047 and 5P5247 Hydraulic Puller Assemblies{1000}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Requirements for Installation of the 197-6700 Piston {1214, 1216}
Requirements for Installation of the 197-6700 Piston {1214, 1216}
Machining of The Cylinder Block to Convert from Wet Cylinder Liners to Dry Cylinders Liners{1201}
Machining of The Cylinder Block to Convert from Wet Cylinder Liners to Dry Cylinders Liners{1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Procedure to Check Cylinder Pressure on 3600 Diesel Engines{1201, 1217, 7450}
Procedure to Check Cylinder Pressure on 3600 Diesel Engines{1201, 1217, 7450}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 3606 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 3606 MARINE ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Jacket Water Side Cover Bolt Breakage
Jacket Water Side Cover Bolt Breakage
Specifications
Manual Valve Group (Cylinder Pressure)
3606 and 3608 Engines
Cylinder Liner
3606 and 3608 Engines
Piston and Rings - Four Ring Piston
3606 and 3608 Engines
Connecting Rod
3606 and 3608 Engines
Piston and Rings - Three Ring Piston
3606 and 3608 Engines
Cylinder Block
3606 and 3608 Engines
Piston and Rings - Three Ring Piston
3606 and 3608 Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 3606 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 3606 MARINE ENGINES
Service Letter-Asia
Systems Operation
Piston Cooling Jets
3606 and 3608 Engines
Cylinder Block, Liners and Heads
3606 and 3608 Engines
Crankcase Explosion Relief Valves
3606 and 3608 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 3606 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 3606 MARINE ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
3606 and 3608 Engines
Main Bearings
3606 and 3608 Engines
Cylinder Block
3606 and 3608 Engines
Disassembly and Assembly
Crankcase Explosion Relief Valve - Remove and Install
3606 and 3608 Engines
Piston Cooling Jets - Remove and Install
3606 and 3608 Engines
Cylinder Liner - Remove
3606 and 3608 Engines
Crankshaft Front Seal - Remove
3606 and 3608 Engines
Crankshaft Front Seal - Install
3606 and 3608 Engines
Crankshaft Rear Seal - Remove
3606 and 3608 Engines
Crankshaft Rear Seal - Install
3606 and 3608 Engines
Cylinder Liner - Install
3606 and 3608 Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Improved Gaskets Used In Central Structure Cover Groups, Jacket Water Lines Groups, Jacket Water Heater Groups And Water Aftercooler Groups{1350,1063}
1987/08/10
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Valve Kit Available For Explosion Relief Valve{1201,1233}
1988/12/12
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Correct Installation Procedure For Cylinder Head Studs{1100,1201}
1989/04/17
New Cylinder Head Gasket Kit Available{1101,1216}
1989/07/24
Cylinder Liner Changes{1216}
1989/11/13
New Crankcase Side Cover Use With Centrifugal Oil Filter Group{1328}
1990/04/23
128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27

Caterpillar Parts SIS Catalog 3606 :

452-9913 VALVE GP-CYLINDER HEAD
VALVE GP-COMPRESSION RELEASE
7W-9957 VALVE GP-COMPRESSION RELEASE
VALVE GP-COMPRESSION RELEASE
7W-9957 VALVE GP-COMPRESSION RELEASE
SUPPORT GP-ENGINE
7E-6540 SUPPORT GP-ENGINE
STUD-TAPERLOCK
122-0286 STUD-TAPERLOCK
STUD-TAPERLOCK
121-2764 STUD-TAPERLOCK
SHAFT GP-STUB
278-3457 SHAFT GP-STUB
SHAFT GP-STUB
125-3660 SHAFT GP-STUB
VALVE GP-EXPLOSION RELIEF
1W-3645 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
1W-3645 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
360-2833 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
366-5400 VALVE GP-EXPLOSION RELIEF
VALVE GP-EXPLOSION RELIEF
385-3820 VALVE GP-EXPLOSION RELIEF
VALVE GP-MANUAL
139-1460 VALVE GP-MANUAL
VALVE GP-MANUAL
197-5805 VALVE GP-MANUAL
VALVE GP-MANUAL
4W-7036 VALVE GP-MANUAL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.